Zwitterionic Osmolyte‐Based Hydrogels with Antifreezing Property,High Conductivity,and Stable Flexibility at Subzero Temperature

Conductive hydrogels have emerged as fascinating materials applied in flexible electronics because of their integrated conductivity and mechanical flexibility. However, the large amounts of water in conductive hydrogels inevitably freeze at subzero temperature, causing a reduction of their ionic transport ability and elasticity. Herein, the bioinspired antifreezing agents—zwitterionic osmolytes (e.g., betaine, proline) are first proposed to prevent ammonium chloride‐containing Ca‐alginate/polyacrylamide hydrogels from freezing. With a facile one‐pot solvent displacement method, the zwitterionic osmolytes can displace the water molecules inside the hydrogels. Due to the excellent freeze tolerance of zwitterionic osmolytes, the resulting zwitterionic osmolyte‐based hydrogels exhibit outstanding ionic conductivity (up to ≈2.7 S m^?1) at ?40 °C, which exceeds the conductivities of most reported conductive hydrogels. Meanwhile, they present stable mechanical flexibility over a wide temperature range (?40 to 25 °C). More importantly, two types of the resulting hydrogel‐based flexible electronics, including a capacitive sensor and a resistive sensor, can maintain their response function at ?40 °C. This work offers a new solution to fabricate conductive hydrogels with antifreezing ability, which can broaden the working temperature range of flexible electronics.     

Highly Stretchable,Elastic, and Ionic Conductive Hydrogel for Artificial Soft Electronics

High conductivity, large mechanical strength, and elongation are important parameters for soft electronic applications. However, it is difficult to find a material with balanced electronic and mechanical performance. Here, a simple method is developed to introduce ion‐rich pores into strong hydrogel matrix and fabricate a novel ionic conductive hydrogel with a high level of electronic and mechanical properties. The proposed ionic conductive hydrogel is achieved by physically cross‐linking the tough biocompatible polyvinyl alcohol (PVA) gel as the matrix and embedding hydroxypropyl cellulose (HPC) biopolymer fibers inside matrix followed by salt solution soaking. The wrinkle and dense structure induced by salting in PVA matrix provides large stress (1.3 MPa) and strain (975%). The well‐distributed porous structure as well as ion migration–facilitated ion‐rich environment generated by embedded HPC fibers dramatically enhances ionic conductivity (up to 3.4 S m^?1, at f = 1 MHz). The conductive hybrid hydrogel can work as an artificial nerve in a 3D printed robotic hand, allowing passing of stable and tunable electrical signals and full recovery under robotic hand finger movements. This natural rubber‐like ionic conductive hydrogel has a promising application in artificial flexible electronics.     

Conductive MXene Nanocomposite Organohydrogel for Flexible,Healable, Low‐Temperature Tolerant Strain Sensors

Conductive hydrogels are attracting tremendous interest in the field of flexible and wearable soft strain sensors because of their great potential in electronic skins, and personalized healthcare monitoring. However, conventional conductive hydrogels using pure water as the dispersion medium will inevitably freeze at subzero temperatures, resulting in the diminishment of their conductivity and mechanical properties; meanwhile, even at room temperature, such hydrogels suffer from the inevitable loss of water due to evaporation, which leads to a poor shelf‐life. Herein, an antifreezing, self‐healing, and conductive MXene nanocomposite organohydrogel (MNOH) is developed by immersing MXene nanocomposite hydrogel (MNH) in ethylene glycol (EG) solution to replace a portion of the water molecules. The MNH is prepared from the incorporation of the conductive MXene nanosheet networks into hydrogel polymer networks. The as‐prepared MNOH exhibits an outstanding antifreezing property (?40 °C), long‐lasting moisture retention (8 d), excellent self‐healing capability, and superior mechanical properties. Furthermore, this MNOH can be assembled as a wearable strain sensor to detect human biologic activities with a relatively broad strain range (up to 350% strain) and a high gauge factor of 44.85 under extremely low temperatures. This work paves the way for potential applications in electronic skins, human?machine interactions, and personalized healthcare monitoring.     

Ambient‐Dried, 3D‐Printable and Electrically Conducting Cellulose Nanofiber Aerogels by Inclusion of Functional Polymers

This study presents a novel, green, and efficient way of preparing crosslinked aerogels from cellulose nanofibers (CNFs) and alginate using non‐covalent chemistry. This new process can ultimately facilitate the fast, continuous, and large‐scale production of porous, light‐weight materials as it does not require freeze‐drying, supercritical CO₂ drying, or any environmentally harmful crosslinking chemistries. The reported preparation procedure relies solely on the successive freezing, solvent‐exchange, and ambient drying of composite CNF‐alginate gels. The presented findings suggest that a highly‐porous structure can be preserved throughout the process by simply controlling the ionic strength of the gel. Aerogels with tunable densities (23–38 kg m^?3) and compressive moduli (97–275 kPa) can be prepared by using different CNF concentrations. These low‐density networks have a unique combination of formability (using molding or 3D‐printing) and wet‐stability (when ion exchanged to calcium ions). To demonstrate their use in advanced wet applications, the printed aerogels are functionalized with very high loadings of conducting poly(3,4‐ethylenedioxythiophene):tosylate (PEDOT:TOS) polymer by using a novel in situ polymerization approach. In‐depth material characterization reveals that these aerogels have the potential to be used in not only energy storage applications (specific capacitance of 78 F g^?1), but also as mechanical‐strain and humidity sensors.     

Seriography‐Guided Reduction of Graphene Oxide Biopapers for Wearable Sensory Electronics

Novel nacre‐mimic bio‐nanocomposites, such as graphene‐based laminates, are pushing the boundaries of strength and toughness as flexible engineering materials. Translating these material advances to functional flexible electronics requires methods for generating print‐scalable microcircuits (conductive elements surrounded by dielectric) into these strong, tough, lightweight bio‐nanocomposites. Here, a new paradigm for printing flexible electronics by employing facile, eco‐friendly seriography to confine the reduction of graphene oxide biopapers reinforced by silk interlayers is presented. Well‐defined, micropatterned regions on the biopaper are chemically reduced, generating a 10⁶ increase in conductivity (up to 10⁴ S m^?1). Flexible, robust graphene‐silk circuits are showcased in diverse applications such as resistive moisture sensors and capacitive proximity sensors. Unlike conductive (i.e., graphene‐ or Ag nanoparticle‐loaded) inks printed onto substrates, seriography‐guided reduction does not create mechanically weak interfaces between dissimilar materials and does not require the judicious formation of ink. The unimpaired functionality of printed‐in graphene‐silk microcircuits after thousands of punitive folding cycles and chemical attack by harsh solvents is demonstrated. This novel approach provides a low‐cost, portable solution for printing micrometer‐scale conductive features uniformly across large areas (>hundreds of cm²) in layered composites for applications including wearable health monitors, electronic skin, rollable antennas, and conformable displays.     

An Anisotropically High Thermal Conductive Boron Nitride/Epoxy Composite Based on Nacre‐Mimetic 3D Network

Polymer‐based thermal interface materials (TIMs) with excellent thermal conductivity and electrical resistivity are in high demand in the electronics industry. In the past decade, thermally conductive fillers, such as boron nitride nanosheets (BNNS), were usually incorporated into the polymer‐based TIMs to improve their thermal conductivity for efficient heat management. However, the thermal performance of those composites means that they are still far from practical applications, mainly because of poor control over the 3D conductive network. In the present work, a high thermally conductive BNNS/epoxy composite is fabricated by building a nacre‐mimetic 3D conductive network within an epoxy resin matrix, realized by a unique bidirectional freezing technique. The as‐prepared composite exhibits a high thermal conductivity (6.07 W m^?1 K^?1) at 15 vol% BNNS loading, outstanding electrical resistivity, and thermal stability, making it attractive to electronic packaging applications. In addition, this research provides a promising strategy to achieve high thermal conductive polymer‐based TIMs by building efficient 3D conductive networks.     

Protein Gel Phase Transition: Toward Superiorly Transparent and Hysteresis‐Free Wearable Electronics

The next generation of wearable electronics for health monitoring, Internet‐of‐Things system, “interface‐on‐invisible,” and green energy harvesting require electrically conductive material that is superiorly transparent, negligibly hysteretic, industrially feasible, and highly stretchable. The practical potential of ionic hydrogel is challenged with obvious hysteresis and a limited sensing range due to relative delamination and viscoelastic performance. Herein, a novel liquid conductor, termed as egg white liquid, is developed from self‐liquidation of egg white hydrogel, and the liquid not only inherits the designed architecture from a hydrogel predecessor but also achieves comparable conductivity (20.4 S m^?1) to the ionic hydrogel and ultrahigh transparency (up to 99.8%) . Moreover, the 3D‐printed liquid–elastomer hybrid exhibits excellent conformability, remarkable sensitivity with negligible hysteresis (0.77%), and the capability of monitoring human motions and dynamic moduli is further demonstrated. The liquid nature inspires a gesture‐controlled touchless user interface for front‐end electronic systems. Furthermore, mechanical energy harvesting and pressure sensing are evidenced by exploiting this liquid conductor into a triboelectric nanogenerator. Notably, the as‐prepared liquid via subsequent phase transition possessing superior transparency, ultralow hysteresis, economic benefit, and unique liquid phase may potentially fuel the development of a new class of wearable electronics, human–machine interface, and clean energy.     

Super Bulk and Interfacial Toughness of Physically Crosslinked Double‐Network Hydrogels

Conventional design wisdom prevents both bulk and interfacial toughness to be presented in the same hydrogel, because the bulk properties of hydrogels are usually different from the interfacial properties of the same hydrogels on solid surfaces. Here, a fully‐physically‐linked agar (the first network)/poly(N ‐hydroxyethyl acrylamide) (pHEAA, the second network), where both networks are physically crosslinked via hydrogen bonds, is designed and synthesized. Bulk agar/pHEAA hydrogels exhibit high mechanical properties (2.6 MPa tensile stress, 8.0 tensile strain, 8000 J m^?2 tearing energy, 1.62 MJ m^?3 energy dissipation), high self‐recovery without any external stimuli (62%/30% toughness/stiffness recovery), and self‐healing property. More impressively, without any surface modification, agar/pHEAA hydrogels can be easily and physically anchored onto different nonporous solid substrates of glass, titanium, aluminum, and ceramics to produce superadhesive hydrogel–solid interfaces (i.e., high interfacial toughness of 2000–7000 J m^?2). Comparison of as‐prepared and swollen gels in water and hydrogen‐bond‐breaking solvents reveals that strong bulk toughness provides a structural basis for strong interfacial toughness, and both high toughness mainly stem from cooperative hydrogen bonds between and within two networks and between two networks and solid substrates. This work demonstrates a new gel system to achieve superhigh bulk and interfacial toughness on nonporous solid surfaces.     

A Flexible 3D Multifunctional MgO‐Decorated Carbon Foam@CNTs Hybrid as Self‐Supported Cathode for High‐Performance Lithium‐Sulfur Batteries

One of the critical challenges to develop advanced lithium‐sulfur (Li‐S) batteries lies in exploring a high efficient stable sulfur cathode with robust conductive framework and high sulfur loading. Herein, a 3D flexible multifunctional hybrid is rationally constructed consisting of nitrogen‐doped carbon foam@CNTs decorated with ultrafine MgO nanoparticles for the use as advanced current collector. The dense carbon nanotubes uniformly wrapped on the carbon foam skeletons enhance the flexibility and build an interconnected conductive network for rapid ionic/electronic transport. In particular, a synergistic action of MgO nanoparticles and in situ N‐doping significantly suppresses the shuttling effect via enhanced chemisorption of lithium polysulfides. Owing to these merits, the as‐built electrode with an ultrahigh sulfur loading of 14.4 mg cm^?2 manifests a high initial areal capacity of 10.4 mAh cm^?2, still retains 8.8 mAh cm^?2 (612 mAh g^?1 in gravimetric capacity) over 50 cycles. The best cycling performance is achieved upon 800 cycles with an extremely low decay rate of 0.06% at 2 C. Furthermore, a flexible soft‐packaged Li‐S battery is readily assembled, which highlights stable electrochemical characteristics under bending and even folding. This cathode structural design may open up a potential avenue for practical application of high‐sulfur‐loading Li‐S batteries toward flexible energy‐storage devices.     

Substrate‐Free and Shapeless Planar Micro‐Supercapacitors

Micro‐supercapacitors (MSCs), albeit powerful, are unable to broaden their potential applications primarily because they are not as flexible and morphable as electronics. To address this problem, a universal strategy to fabricate substrate‐free, ultrathin, shapeless planar‐MSCs with high‐performance tenability under serious deformation is put forward. These represent a new class of “all‐inside‐one” film supercapacitors, achieved by encapsulating two‐dimensional interdigital microelectrodes within chemically cross‐linked polyvinyl‐alcohol‐based hydrogel electrolyte containing graphene oxide (GO). GO nanosheets significantly improve ionic conductivity, enhance the capacitance, and boost robustness of hydrogel electrolyte. Consequently, the entire MSC, while being only 37 µm thick, can be crumpled and its shape can self‐adjust through fluid channel ten times smaller than its original size without any damage, demonstrating shapelessness. Using MXene as active material, high single‐cell areal capacitance of 40.8 mF cm^?2 is achieved from microelectrodes as thin as 5 µm. Furthermore, to demonstrate wide applicability of this protocol, screen‐printed graphene‐based highly integrated MSCs connecting nine cells in series are fabricated to stably output a high voltage of 7.2 V while crumpling them from 0.11 to 0.01 cm^?3, manifesting superior performance uniformity. This protocol allows the coexistence of high performance with incredible flexibility that may greatly diversify MSCs' applications.     

Room‐Temperature Metallic Fusion‐Induced Layer‐by‐Layer Assembly for Highly Flexible Electrode Applications

To fabricate flexible electrodes, conventional silver (Ag) nanomaterials have been deposited onto flexible substrates, but the formed electrodes display limited electrical conductivity due to residual bulky organic ligands, and thus postsintering processes are required to improve the electrical conductivity. Herein, an entirely different approach is introduced to produce highly flexible electrodes with bulk metal–like electrical conductivity: the room‐temperature metallic fusion of multilayered silver nanoparticles (NPs). Synthesized tetraoctylammonium thiosulfate (TOAS)‐stabilized Ag NPs are deposited onto flexible substrates by layer‐by‐layer assembly involving a perfect ligand‐exchange reaction between bulky TOAS ligands and small tris(2‐aminoethyl)amine linkers. The introduced small linkers substantially reduce the separation distance between neighboring Ag NPs. This shortened interparticle distance, combined with the low cohesive energy of Ag NPs, strongly induces metallic fusion between the close‐packed Ag NPs at room temperature without additional treatments, resulting in a high electrical conductivity of ≈1.60 × 10⁵ S cm^?1 (bulk Ag: ≈6.30 × 10⁵ S cm^?1). Furthermore, depositing the TOAS–Ag NPs onto cellulose papers through this approach can convert the insulating substrates into highly flexible and conductive papers that can be used as 3D current collectors for energy‐storage devices.     

DyeIonogels: Proton‐Responsive Ionogels Based on a Dye‐Ionic Liquid Exhibiting Reversible Color Change

Transparent, ion‐conducting, and flexible ionogels based on the room temperature ionic liquid (IL) 1‐butyl‐3‐methylimidazolium bis(trifluoromethane sulfonyl)imide [Bmim][N(Tf)₂], the dye‐IL (DIL) 1‐butyl‐3‐methylimidazolium methyl orange [Bmim][MO], and poly(methylmethacrylate) (PMMA) are prepared. Upon IL incorporation the thermal stability of the PMMA matrix significantly increases from 220 to 280 °C. The ionogels have a relatively high ionic conductivity of 10^?4 S cm^?1 at 373 K. Most importantly, the ionogels exhibit a strong and reversible color change when exposed to aqueous or organic solutions containing protons or hydroxide ions. The resulting material is thus a prototype of soft multifunctional matter featuring ionic conductivity, easy processability, response to changes in the environment, and a strong readout signal, the color change, that could be used in optical data storage or environmental sensing.     

Simultaneous Electrochemical Dual‐Electrode Exfoliation of Graphite toward Scalable Production of High‐Quality Graphene

Developing scalable methods to produce large quantities of high‐quality and solution‐processable graphene is essential to bridge the gap between laboratory study and commercial applications. Here an efficient electrochemical dual‐electrode exfoliation approach is developed, which combines simultaneous anodic and cathodic exfoliation of graphite. Newly designed sandwich‐structured graphite electrodes which are wrapped in a confined space with porous metal mesh serve as both electrodes, enabling a sufficient ionic intercalation. Mechanism studies reveal that the combination of electrochemical intercalation with subsequent thermal decomposition results in drastic expansion of graphite toward high‐efficiency production of graphene with high quality. By precisely controlling the intercalation chemistry, the two‐step approach leads to graphene with outstanding yields (85% and 48% for cathode and anode, respectively) comprising few‐layer graphene (1–3 layers, >70%), ultralow defects (I_D/I_G < 0.08), and high production rate (exceeding 25 g h^?1). Moreover, its excellent electrical conductivity (>3 × 10⁴ S m^?1) and great solution dispersibility in N‐methyl pyrrolidone (10 mg mL^?1) enable the fabrication of highly conductive (11 Ω sq^?1) and flexible graphene films by inkjet printing. This simple and efficient exfoliation approach will facilitate the development of large‐scale production of high‐quality graphene and holds great promise for its wide application.     

A Flexible Dual‐Ion Battery Based on Sodium‐Ion Quasi‐Solid‐State Electrolyte with Long Cycling Life

Sodium‐based dual‐ion batteries (SDIBs) have attracted much attention for their advantages of high operating voltage, environmental friendliness, and especially low cost. However, the electrochemical performances of the reported SDIBs are still unsatisfied due to the decomposition problem of traditional liquid electrolyte under high working voltage. Development of quasi‐solid‐state electrolytes (QSSEs) with excellent electrochemical stability at high voltage is a possible means to improve their properties. In this work, a flexible SDIB based on a QSSE, consisting of poly(vinylidene ?uoride‐co‐hexa?uoropropylene) (PVDF‐HFP) three‐dimensionally cross‐linked with Al₂O₃ nanoparticles, which exhibits a porous 3D structure with dramatically enhanced ionic conductivity up to ≈1.3 × 10^?3 S cm^?1, facilitating fast ionic migration of both anions and cations, is reported. This quasi‐state SDIB exhibits a high specific capacity of 96.8 mAh g^?1 at a current rate of 5 C and excellent cycling stability with a capacity retention of 97.5% after 600 cycles at 5 C, which is the best performance of the SDIBs. Moreover, excellent flexibility and a wide working temperature range (?20 to 70 °C) have been realized for this battery, suggesting its potential for high‐performance flexible energy storage applications.     

Unprecedentedly Tough,Folding‐Endurance,and Multifunctional Graphene‐Based Artificial Nacre with Predesigned 3D Nanofiber Network as Matrix

Mimicking the hierarchical brick‐and‐mortar architecture of natural nacre provides great opportunities for the design and synthesis of multifunctional artificial materials. The crucial challenge to push nacre‐mimetic functional materials toward practical applications is to achieve ample ductility, toughness, and folding endurance with simultaneously maintaining high‐level functional properties. In this study, the microstructure of nacre‐mimetics is reformed through predesigning a 3D nanofiber network to replace conventional polymer matrices. A unique sol–gel–film transformation approach is developed to fabricate a graphene‐based artificial nacre containing a preforming 3D, interconnective, inhomogeneous poly(p‐phenylene benzobisoxazole) nanofiber network. The fabulous coupling of the extensive sliding of graphene nanoplatelets and intensive stretching of the 3D nanofiber network over a large scale enables the artificial nacre to display natural nacre‐like deformation behavior, achieving ultralarge strain‐to‐failure (close to 35%), unprecedented toughness (close to 50 MJ m^?3), and fold endurance (no decrease in tensile properties after folding for 10 000 times or folding at increasing stress). The new levels of ductility, toughness, and folding endurance are integrated with outstanding thermal properties, including thermal conductivity (≈130 W m^?1 K^?1), thermal stability (520 °C) and nonflammability, rendering the lightweight nacre‐mimetics promising in flexible electronic devices, particularly for aerospace electronics.     

Redox‐Active Iron‐Citrate Complex Regulated Robust Coating‐Free Hydrogel Microfiber Net with High Environmental Tolerance and Sensitivity

Stretchable hydrogel microfibers as a novel type of ionic conductors are promising in gaining skin‐like sensing applications in more diverse scenarios. However, it remains a great challenge to fabricate coating‐free but water‐retaining conductive hydrogel microfibers with a good balance of spinnability and mechanical strength. Here the old yet significant redox chemistry of Fe‐citrate complex is employed to solve this issue in the continuous draw‐spinning process of poly(acrylamide‐co‐sodium acrylate) hydrogel microfibers and microfiber nets from a water/glycerol solution. The resultant microfibers are ionically conductive, highly stretchable, and uniform with tunable diameters. Furthermore, the presence of redox‐reversible Fe‐citrate complex and glycerol endows the fibers with good anti‐freezing, water‐retaining, and environmentally intelligent properties. Humidity and UV light can finely mediate the stiffness of hydrogel microfibers; conversely, the ionic conductance of microfibers is also responsive to light, humidity, and strain, which enables the highly sensitive perception of environmental changes. The present draw‐spinning strategy provides more possibilities for coating‐free conductive hydrogel microfibers with a variety of responsive and sensing applications.     

Solution‐Processable,High‐Performance Flexible Electroluminescent Devices Based on High‐k Nanodielectrics

Flexible alternating‐current electroluminescent (ACEL) devices have attracted considerable attention for their ability to produce uniform light emission under bent conditions and have enormous potential for applications in back lighting panels, decorative lighting in automobiles, and panel displays. Nevertheless, flexible ACEL devices generally require a high operating bias, which precludes their implementation in low power devices. Herein, solution‐processed La‐doped barium titanate (BTO:La) nanocuboids (≈150 nm) are presented as high dielectric constant (high‐k) nanodielectrics, which can enhance the dielectric constant of an ACEL device from 2.6 to 21 (at 1 kHz), enabling the fabrication of high‐performance flexible ACEL devices with a lower operating voltage as well as higher brightness (≈57.54 cd m^?2 at 240 V, 1 kHz) than devices using undoped BTO nanodielectrics (≈14.3 cd m^?2 at 240 V, 1 kHz). Furthermore, a uniform brightness across the whole panel surface of the flexible ACEL devices and excellent device reliability are achieved via the use of uniform networks of crossaligned silver nanowires as highly conductive and flexible electrodes. The results offer experimental validation of high‐brightness flexible ACELs using solution‐processed BTO:La nanodielectrics, which constitutes an important milestone toward the implementation of high‐k nanodielectrics in flexible displays.     

Conductive “Smart” Hybrid Hydrogels with PNIPAM and Nanostructured Conductive Polymers

Stimuli‐responsive hydrogels with decent electrical properties are a promising class of polymeric materials for a range of technological applications, such as electrical, electrochemical, and biomedical devices. In this paper, thermally responsive and conductive hybrid hydrogels are synthesized by in situ formation of continuous network of conductive polymer hydrogels crosslinked by phytic acid in poly(N‐isopropylacrylamide) matrix. The interpenetrating binary network structure provides the hybrid hydrogels with continuous transporting path for electrons, highly porous microstructure, strong interactions between two hydrogel networks, thus endowing the hybrid hydrogels with a unique combination of high electrical conductivity (up to 0.8 S m^?1), high thermoresponsive sensitivity (significant volume change within several seconds), and greatly enhanced mechanical properties. This work demonstrates that the architecture of the filling phase in the hydrogel matrix and design of hybrid hydrogel structure play an important role in determining the performance of the resulting hybrid material. The attractive performance of these hybrid hydrogels is further demonstrated by the developed switcher device which suggests potential applications in stimuli‐responsive electronic devices.     

Environment Tolerant Conductive Nanocomposite Organohydrogels as Flexible Strain Sensors and Power Sources for Sustainable Electronics

Conductive hydrogels (CHs) have been highlighted in the design of flexible strain sensors and stretchable triboelectric nanogenerators (TENGs) on the basis of their excellent physicochemical properties such as large stretchability and high conductivity. Nevertheless, the incident freezing and drying behaviors of CHs by using water solvent as the dispersion medium limit their application scopes significantly. Herein, an environment tolerant and ultrastretchable organohydrogel is demonstrated by a simple solvent-replacement strategy, in which the partial water in the as-synthesized polyacrylamide/montmorillonite/carbon nanotubes hydrogel is replaced with the glycerol, leading to excellent temperature toleration (−60 to 60 °C) and good stability (30 days under normal environment) without sacrificing the stretchability and conductivity. The organohydrogel exhibits an ultrawide strain sensing range (0–4196%) with a high sensitivity of 8.5, enabling effective detection and discrimination of human activities that are gentle or drastic under various conditions. Furthermore, the organohydrogel is assembled in a single-electrode TENG, which displays excellent energy harvesting ability even under a stretchability of 500% and robustness to directly power wearable electronics in harsh cold conditions. This work inspires a simple route for multifunctional organohydrogel and promises the practical application of flexible and self-powered wearable devices in extreme environments.     

Rational Design of a Printable,Highly Conductive Silicone‐based Electrically Conductive Adhesive for Stretchable Radio‐Frequency Antennas

Stretchable radio‐frequency electronics are gaining popularity as a result of the increased functionality they gain through their flexible nature, impossible within the confines of rigid and planar substrates. One approach to fabricating stretchable antennas is to embed stretchable or flowable conductive materials, such as conductive polymers, conductive polymer composites, and liquid metal alloys as stretchable conduction lines. However, these conductive materials face many challenges, such as low electrical conductivity under mechanical deformation and delamination from substrates. In the present study, a silicone‐based electrically conductive adhesive (silo‐ECA) is developed that have a conductivity of 1.51 × 10⁴ S cm^?1 and can maintain conductivity above 1.11 × 10³ S cm^?1, even at a large stain of 240%. By using the stretchable silo‐ECAs as a conductor pattern and pure silicone elastomers as a base substrate, stretchable antennas can be fabricated by stencil printing or soft‐lithography. The resulting antenna's resonant frequency is tunable over a wide range by mechanical modulation. This fabrication method is low‐cost, can support large‐scale production, has high reliability over a wide temperature range, and eliminates the concerns of leaking or delamination between conductor and substrate experienced in previously reported micro‐fluidic antennas.