基于计算-转发策略的双向中继通信方案

针对双向中继通信中物理层网络编码的应用,采用基于计算-转发的中继策略,研究并推导了在AWGN信道和衰落信道下的可达速率。为了在衰落信道下获得更高的传输速率,提出了一种采用信道反转预编码的新型传输方案。对比可知,采用这一预编码方案可使通信性能获得较大提升。在两种信道条件下,基于计算-转发的双向中继通信方案都能获得最大自由度,表明计算-转发策略是当前最适于双向中继通信的中继策略。     

能量收集双向中继网络的中继选择和功率分配

结合能量收集技术,研究了放大转发双向中继网络的系统性能。基于双向中继系统中的两个端到端信噪比平衡准则,推导出了单中继选择情况下信源最优的功率分配方案和中继最优的能量收集比例。仿真结果证明所提方法能够实现最好的系统性能。通过比较发现,能量收集双向中继网络比传统双向中继网络能够实现更高的传输速率。     

采用网络编码的双向中继信道中软信息的传输方法

采用格栅编码量化(TCQ)这一信源编码方法结合格栅编码调制(TCM)技术,解决了双向中继信道中软信息的传输问题。仿真表明,在衰落信道下,该方法性能上优于传统的译码转发和放大转发的网络编码方法。该方法应用于双向中继信道并在有限带宽的情况下可获得接近理想信道的链路性能。该方法为软信息网络编码走向实用提供了一种有效的思路。     

无线协作网络中的最优中继选择方案及中断概率分析

从物理层安全的角度出发,在含有协作中继的通信网络中,通过选择最优中继来传递信息可有效提升系统性能。讨论了在含有多个单天线窃听用户的多中继通信系统中对最优中继的选择方案,并对系统采用放大转发（amplify-and-forward,AF）协议和解码转发（decode-and-forward,DF）协议这两种不同的情况分别进行了讨论和比较,同时还对比了不含中继的直接传输情况。理论分析和仿真结果表明,最优中继选择方案可有效保障系统的安全性能。     

多用户MIMO网络的OFDM放大转发双向中继策略

在多用户MIMO通信网络中,该文提出一种新的放大转发双向中继策略,在第1时隙的多址传输中采用OFDMA,在第2时隙的广播传输中采用OFDM/SDMA,通过利用频率分集和空间分集提高了系统性能。针对双向中继传输的特点,采用两种方法在每个子载波上设计了中继波束形成矩阵,即信漏噪比(SLNR)准则和块对角化迫零(BDZF)准则。利用割集理论推导了该双向中继网络的容量域上界。仿真结论表明,所提出的双向中继策略在系统和速率性能上优于其他3种中继策略,并能逼近所推导的容量域上界。     

能量收集全双工中继网络中的中继策略研究

本文针对双跳全双工多中继系统,研究了在中继节点能量受限情况下的中继选择方案。在该文中,中继工作方式为放大转发（Amplify-and-Forward, AF）,且中继通过收集源节点提供的能量来对源节点信息进行转发。整个通信过程分为两阶段,能量收集阶段与信息传输阶段,即采用的是时域分割方案。为了获得较好的性能与复杂度折中,本文分别研究了三种不同的中继选择策略,即最佳中继选择方案和两种次优中继选择方案。针对所提的三种方案,推导分析了其系统中断概率的理论值和下边界,以及系统的有效吞吐量。最后,利用蒙特卡洛仿真验证了理论分析的正确性,且仿真结果表明最佳中继选择方案的性能优于两种次优的中继选择方案,但其实现的复杂度高。      

解码转发双向无线携能全双工中继系统的能效研究

为了优化双向单中继全双工系统的能效,在中继节点引入无线携能技术,提出了一个双向无线携能全双工中继系统。该系统中继节点以功率分割方式进行能量收集,将收集的能量用于解码转发,在保证用户的服务质量需求下,将能效优化问题转化为能量消耗最小的优化问题,依据传输时隙以及各时隙信道容量需求进一步划分为两个子优化问题;然后,以能效最大化为目标,根据各时隙的信道容量求出传输功率,利用解码转发特性求出传输时间和功率分割因子,得出能效最优解。仿真表明,所提出的双向无线携能全双工中继系统的能效是单向无线携能全双工系统的1.3倍、双向全双工放大转发中继系统的2倍和双向全双工解码转发中继系统的2.6倍。      

格约简辅助MIMO双向中继网络编码设计

近年来,在无线通信领域受到广泛关注的网络编码技术,允许中继节点对接收到的多路数据流进行适当处理后转发多路数据流的合成信息.MIMO双向中继通信网络中网络编码方法分为两个阶段:两信源节点分别将预发送的数据行格约简辅助(LRA)进行预编码操作,然后发送给中继节点;中继节点利用概率分布特性估计去除噪声的异或阈值区域,利用异或阈值区域对接收到的混合信号进行区域量化处理,并将结果广播给两信源节点.仿真结果表明,本文所提出的网络编码方法比经典的放大转发MIMO双向中继网络编码方法在性能上获得了较大的增益.     

基于协作通信系统的中继选择方案的研究

本文研究基于两跳的协作通信系统中的中继选择问题.为了降低中断概率,传统中继选择方案往往需要引入更多的中继节点参与协作传输,导致系统平均吞吐量下降.为解决上述问题,本文提出了一种新的自适应中继选择方案(ARSS),此方案可以结合两跳的链路信道状况,自适应地选择中继节点及其转发协议.仿真结果表明,与其他中继选择方案相比,本...     

不对称速率双向中继传输策略研究

在实际双向中继信道的通信传输中,由于信道质量,发射功率,业务需求等条件的不对称,双向信道的传输速率往往也是不对称的。该文针对双向中继信道中不对称速率传输的情况进行了研究,基于物理层网络编码,提出两种不对称传输的方案。第1种方案采用级联信道编码;第2种方案采用子集编码和子集调制。这样设计使得中继节点对接收到的叠加信号只需一次译码就可以直接解出信息比特的异或,从而降低了译码复杂度。仿真结果表明,结合信道编码的不对称传输设计,在提高系统有效性的同时,进一步降低了误比特率,保证了系统的可靠性。     

多接入中继信道中的单中继选择

研究表明,协作中继选择能提高无线中继网络的鲁棒性和能效。文中研究一个多接入中继信道,包含2个信源,N个中继和1个信宿。中继节点为半双工,对两个信源的信号采用非再生的网络编码。考虑直接链路,基于最佳最差信道、最佳信噪比和最佳调和平均选择,提出新的选择策略。仿真结果表明其在性能上优于原有策略。     

分析继电保护二次回路检修维护

在电力系统的运行中,继电保护是必不可少的组成装置,它可以为整个系统的安全稳定运行提供保护作用。随着社会用电需求量的增加,对于供电系统运行的稳定性就有了更高要求,不仅要保证电力输送的及时性,而且更加关注运行的安全性。二次回路故障作为继电保护中的常见问题,它的出现会导致继电保护装置功能发挥受到限制,降低供电的安全性,因此,加强二次回路检修维护工作,提高检修维护效率势在必行。     

多用户MIMO双向中继信道鲁棒预编码

在多用户MIMO双向中继系统中,若使用非理想信道模型,中继处仅能获得部分下行信道状态信息,这样将导致系统性能大幅度下降。由此提出基于最小信干噪比最大化的鲁棒预编码方案。仿真表明,该方案不仅可以使最差信干噪比最大化,也有效地改善了系统的比特误码率性能。     

Collision resolving relay selection in large-scale blind relay networks

Optimal relay selection in large-scale networks is a difficult task since the network is usually considered as blind due to the high volume and collection difficulty of the relays’ information. In this paper, we develop a collision resolving relay selection (CReS) scheme that achieves the optimal relay from a random set of candidates without the previous knowledge of any individual relay. By introducing stochastic geometry based quality-of-service region, the relation between the distribution of the available relay number and the transmission request is established. Furthermore, the selection phase of the CReS scheme is divided into two sub-phases according to different distributions of the relay number in boundless and bounded regions. A switch rule is proposed when several relays collide in the first sub-phase, followed by the second sub-phase to resolve the collision with the splitting algorithm. The optimal solution that requires minimum selection slots for all sub-phases is derived. In addition, a sub-optimal solution is also explored to reduce the computational complexity. The scheme shows a better applicability than conventional information-based schemes in view of its little information requirement when dealing with large-scale relay allocation problems.     

Improving amplify-and-forward relay selection algorithm based on partial relay link

This article addresses the design problem of selecting an appropriate relay in amplify-and-forward(AF) cooperative diversity systems.In this regard,this article focuses on relay selection based on partial channel knowledge only across the source and relay links.In particular,the two fundamental questions will be answered,that is,whether to cooperate and whom to cooperate with.Through answering these two questions,an improved relay selection strategy based on partial relay link,which emphasizes that cooperat...     

Optimal relay functionality for SNR maximization in memoryless relay networks

We explore the SNR-optimal relay functionality in a mernoryless relay network, i.e. a network where, during each channel use, the signal transmitted by a relay depends only on the last received symbol at that relay. We develop a generalized notion of SNR for the class of memoryless relay functions. The solution to the generalized SNR optimization problem leads to the novel concept of minimum mean squared uncorrelated error (MMSUE) estimation. For the elemental case of a single relay, we show that MMSUE estimate is a scaled version of the MMSE estimate. This scheme, that we call estimate and forward (EF), performs better than the best of amplify and forward (AF) and demodulate and forward (DF) in both parallel and serial relay networks. We determine that AF is near-optimal at low transmit power in a parallel network, while DF is near-optimal at high transmit power in a serial network. For hybrid networks that contain both serial and parallel elements, the advantage of EF over the best of AF and DF is found to be significant. Error probabilities are provided to substantiate the performance gain obtained through SNR optimality. We also show that, for Gaussian inputs, AF, DF and EF are identical     

Wireless relay networks

Two network architectures for connecting fixed wireless nodes to a central concentrator-relay and star-are combined into a structured network architecture called a relay star network. A relay star network is characterized by the property that there is a unique communication path between any two nodes; that is, the graph of the network is a rooted tree. In this article we present a tutorial discussion of relay star networks using examples and an extended discussion of a protocol for wireless data collection on relay star networks. The target application for this work is data collection on networks of fixed low-cost, low-data-rate environmental monitors such as urban terminals (parking meters, pay telephones, fire alarm boxes, distress call stations, etc.) and utility meters (water, electricity, gas, steam, etc.)     

Digital directional relay

Protective gear relays of electromagnetic and static types are widely used for the protection of power systems. The design of new relays based on the application of microprocessor is reported in the literature. This paper presents a new design principle for the digital directional relay based completely on digital units. The developed relay provides good discrimination using a new idea for the direction of power flow based on the use of voltage, current and the power factor without the need for their multiplication. This has reduced the operating time of the new relay.     

Multi relay node selection strategy for energy capture collaborative relay network

An energy capture cooperative relay network was studied.Unlike traditional cooperative relay networks,the relay nodes generally did not have a fixed energy supply but could carry out energy capture.For this network,a natural question was how to determine whether the relay nodes perform energy capture or data forwarding,and how to select the relay node to assist the information transmission between the source node and the destination node.Based on this problem,a multi-relay node selection scheme was proposed,which select the operation according to the energy of the current time slot of the relay node.In each time slot,the relay node that meet the battery threshold requirements was selected to assist in transmission.The Markov chain was used to model the charging and discharging process of the relay node battery,and the probability of interruption and throughput of the wireless network was obtained.And the value of the battery threshold when the throughput was maximized,that is,when the probability of network breakage was minimum was solved.Finally,the advantages of this scheme were verified by numerical experiments.