High-efficiency GaAs power MESFETs prepared by ion implantation

GaAs power MESFETs have been fabricated using ion implantation to form channel layers. A 1 ?m gate length by 2400 ?m gate width device has demonstrated an output power of 1.63 W with 6.9 dB associated gain, 35% power-added efficiency and 9.7 dB linear gain at 10 GHz. The transconductance of this device is 280 mS, which corresponds to 117 mS/mm. This result demonstrates that excellent GaAs power MESFETs can be made by ion implantation, and is comparable to average results demonstrated by devices made by AsCl3 vapour phase epitaxy.     

0.25-μm gate millimeter-wave ion-implanted GaAs MESFETs

Quarter-micrometer gated ion-implanted GaAs MESFETs which demonstrate device performance comparable to AlGaAs/InGaAs pseudomorphic HEMTs (high-electron mobility transistors) have been successfully fabricated on 3-in-diameter GaAs substrates. The MESFETs show a peak extrinsic transconductance of 480 mS/mm with a high channel current of 720 mA/mm. From S-parameter measurements, the MESFETs show a peak current-gain cutoff frequency f_t of 68 GHz with an average f_t of 62 GHz across the wafer. The 0.25-μm gate MESFETs also exhibit a maximum-available-gain cutoff frequency f_t greater than 100 GHz. These results are the first demonstration of potential volume production of high-performance ion-implanted MESFETs for millimeter-wave application     

Submicron-gate ion-implanted In/sub 0.15/Ga/sub 0.85/As/GaAs MESFETs with graded indium composition

0.25 mu m and 0.5 mu m gate ion-implanted MESFETs have been fabricated on In/sub 0.15/Ga/sub 0.85/As epitaxial layers. These layers are grown by MOCVD on three inch diameter GaAs substrates with the indium mole fraction graded from 15% at the InGaAs/GaAs heterointerface to 0% at the surface. Both devices show excellent DC and microwave performance. From S-parameter measurements, extrinsic current gain cutoff frequencies f/sub t/ of 120 and 61 GHz are obtained for the 0.25 mu m and 0.5 mu m gate MESFETs, respectively. The authors investigate the potential of small-bandgap InGaAs materials for submicron-gate MESFET applications.<>     

Millimeter-wave ion-implanted gradedInxGa1-xAs MESFETs grown by MOCVD

The authors present the fabrication and characterization of ion-implanted graded In_xGa_1-xAs/GaAs MESFETs. The In_xGa_1-xAs layers are grown on GaAs substrates by MOCVD (metal-organic chemical vapor deposition) with InAs concentration graded from 15% at the substrate to 0% at the surface. 0.5-μm gate MESFETs are fabricated on these wafers using silicon ion implantation. In addition to improved Schottky contact, the graded In_xGa _1-xAs MESFET achieves maximum extrinsic transconductance of 460 mS/mm and a current-gain cutoff frequency f_t of 61 GHz, which is the highest ever reported for a 0.5-μm gate MESFET. In comparison, In_0.1Ga_0.9As MESFETs fabricated with the same processing technique show an f_t of 55 GHz     

Ion-implanted GaAs/AlGaAs heterojunction FET's grown by MOCVD

The successful fabrication of an ion-implanted GaAs/AlGaAs heterojunction FET device is discussed. Half-micrometer gate-length FET devices are fabricated by ion implantation into GaAs/AlGa heterostructures grown by metalorganic chemical vapor deposition (MOCVD) on 3-in-diameter GaAs substrates. The FET device exhibits a maximum extrinsic transconductance of 280 mS/mm with reduced transconductance variation over 2 V of gate bias. Excellent microwave performance is achieved with an f_t of 40 GHz, which is comparable to results obtained from 0.25-μm gate GaAs MESFETs. The effects of ion implantation on the heterojunction and corresponding device characteristics are also discussed     

Extremely low-noise MESFETs fabricated by metal-organic chemical vapour deposition

Quarter-micron gate low-noise GaAs MESFETs have been developed by delineating gate electrodes by an electron-beam lithography technique and by using high-purity epiwafers prepared by a metal-organic-chemical vapour deposition (MOCVD) technique. At 18 GHz, a noise figure of 1.75 dB with an associated gain of 8.5 dB and a maximum available gain of 11 dB were obtained at drain currents of 10 mA and 30 mA, respectively. This is the lowest noise figure yet reported for low-noise GaAs MESFETs.     

High-speed and low-power GaAs DCFL divider

High-speed and low-power divide-by-252 or -256 circuit have been fabricated by using high-transconductance GaAs enhancement-mode MESFETs. This variable-modulus divider is able to operate up to a clock frequency of 3.7 GHz. The total power dissipation at the maximum frequency is 180 mW, and it is as low as 42 mW and 30 mW at 3 GHz and 2.5 GHz, respectively.     

X-band performance of GaAs power f.e.t.s

The results of X-band measurements on GaAs power f.e.t.s are reported. These devices are fabricated with a simple planar process. Devices with output powers of 1 W or more at 9 GHz with 4 dB gain have been fabricated from more than a dozen slices. The highest output powers observed with 4 dB gain are 1.78 W at 9 GHz and 2.5 W at 8 GHz. Devices have been operated with 46% power-added efficiency at 8 GHz.     

High-performance GaAs MESFETs with advanced LDD structure fordigital, analog, and microwave applications

GaAs MESFETs with advanced LDD structure have been developed by using a single resist-layered dummy gate (SRD) process. The advanced LDD structure suppresses the short channel effects, and reduces source resistance, while maintaining a moderate breakdown voltage. The 0.3-μm enhancement-mode devices exhibit a transconductance of 420 mS/mm, while the breakdown voltage of the depletion-mode device (V_th=-500 mV) is larger than 6 V. The standard deviation of the threshold voltage for 0.3-μm devices is less than 30 mV across a 3-in wafer. The 0.3-μm devices exhibit an average cutoff frequency of 47.2 GHz with a standard deviation of 1.3 GHz across a 3-in wafer. The cutoff frequency of a 0.15-μm device is as high as 72 GHz. D-type flip-flop circuits for digital IC applications and preamplifier for analog IC applications fabricated with 0.3-μm gate length devices operate above 10 Gb/s. In addition, the 0.3-μm devices also show good noise performance with a noise figure of 1.1 dB with associated gain of 6.5 dB at 18 GHz. These results demonstrate that GaAs MESFETs with an advanced LDD structure are quite suitable for digital, analog, microwave, and hybrid IC applications     

⟨110⟩-oriented GaAs MESFETs

GaAs metal semiconductor field-effect transistors (MESFETs) have been successfully fabricated on molecular-beam epitaxial (MBE) films grown on the off-axis (110) GaAs substrate. The (110) substrates were tilted 6° toward the (111) Ga face in order to produce device quality two-dimensional MBE growth. Following the growth of a 0.4-μm undoped GaAs buffer, a 0.18-μm GaAs channel with a doping density of 3.4×10¹⁷ cm^-3 and a 0.12-μm contact layer with a doping density of 2×10¹⁸ cm^-3, both doped with Si, were grown. MESFET devices fabricated on this material show very low-gate leakage current, low output conductance, and an extrinsic transconductance of 200 mS/mm. A unity-current-gain cutoff frequency of 23 GHz and a maximum frequency of oscillation of 56 GHz have been achieved. These (110) GaAs MESFETs have demonstrated their potential for high-speed digital circuits as well as microwave power FET applications     

High DC and microwave characteristics of subhalf-micrometre gate ion-implanted GaAs MESFETs using trilayer deep UV lithography

Subhalf-micrometre gate length ion-implanted GaAs MESFETs have been fabricated on 3 inch diameter substrates using trilayer deep UV lithography. Implanted MESFETs with 0.3 mu m gate lengths exhibit a maximum extrinsic transconductance of 205 mS/mm at a drain current of 600 mA/mm. From S-parameter measurements, a current gain cutoff frequency f/sub t/ of 56 GHz and a maximum available gain cutoff frequency f/sub max/ greater than 90 GHz are achieved. The gate-to-drain diode characteristics of the devices show a sharp breakdown voltage of 13-15 V. The high drain current-drain voltage and microwave characteristics indicate that ion-implanted technology with trilayer deep UV lithography has potential for the manufacture of power devices and amplifiers for Q-band communication applications. This is the first reported result using trilayer deep UV lithography to demonstrate both f/sub t/ over 56 GHz and 13-15 V gate-to-drain breakdown on 0.3 mu m gate-length ion-implanted GaAs MESFETs.<>     

A 1.2 GHz frequency synthesizer using a custom-design divide-by-20/21/22/23/24 GaAs circuit

The authors describe the circuit design and the process utilized to fabricate a 1.2 GHz 380-mW divide-by-20/21/22/23/24 GaAs circuit aimed at frequency synthesizer applications. The circuit consists of a 5/6 prescaler, a divide-by-4 circuit, and a four-channel multiplexer. The circuit has been implemented with BFL gates fabricated with 0.7-/spl mu/m planar self-aligned normally-on MESFETs. Further improvement can be expected by utilizing DCFL gates instead. A maximum frequency of 2.5 GHz and an internal active power of 50 mW have been simulated. Consequently the normally-off (N-OFF) GaAs circuit would exhibit a speed by power product four times lower than that of equivalent Si ECL dividers based in bipolar processes being developed today.     

Ku- and K-band internally matched high-power GaAs f.e.t. amplifiers

Internal-matching techniques, using lumped-element capacitors fabricated on high dielectric ceramics, have been developed for high power GaAs f.e.t.s in Ku- and K-bands. The developed internally matched high-power f.e.t. amplifier modules have exhibited 1.9 W power output with 4 dB associated gain at 14 GHz and 1.25 W power output with 3 dB associated gain at 18 GHz.     

Performance comparison of wide bandgap semiconductor rf power devices

Impressive radio frequency power performance has been demonstrated by three radically different wide bandgap semiconductor power devices, SiC metal semiconductor field effect transistors (MESFETs), SiC static induction transistors (SITs), and AlGaN heterojunction field effect transistors (HFETs). AlGaN HFETs have achieved the highest f_max of 97 GHz. 4H-SiC MESFETs have achieved the highest power densities, 3.3 W/mm at 850 MHz (CW) and at 10 GHz (pulsed). 4H-SiC SITs have achieved the highest output power, 450 W (pulsed) at 600 MHz and 38 W (pulsed) at 3 GHz. Moreover, a one kilowatt, 600 MHz SiC power module containing four multi-cell SITs with a total source periphery of 94.5 cm has been demonstrated.     

MOCVD制备GaAs/AlGaAs异质结和异质结双极晶体管(HBT)的研究

本文应用MOCVD技术制备出高质量的GaAs,AlGaAs外延材料以及GaAs/AlGaAs异质结和多量子阱结构.首次成功地用该技术生长了微波HBT全结构材料,并获得了较高性能的器件结果:300K时直流增益(β)为15～40,77K时为60,截止频率大于10GHz,最高振荡频率为5.5GHz.     

High-power GaAs FET's prepared by ion implantation

High-power GaAs FET's have been developed by using ion implantation to form channel layers and n⁺ohmic contact regions. The burn-out characteristics have been improved by introducing n⁺regions with high surface carrier concentration. The source-drain burnout voltage has been found to be more than 40 V. The distributions of saturated source-drain current (Idss) and RF output power of the devices have been found much more uniform than those of power GaAs FET's prepared by metalorganic chemical vapor deposition (MOCVD). Multichip operation of the FET's has demonstrated an excellent power combining efficiency due to the good uniformity among the chips. The two-chip device (total gate width WG= 14.4 mm) has delivered 5 W at 10 GHz with 4-dB gain and 23-percent power added efficiency (ηadd). The four-chip device (WG= 28.8 mm) has given 10 W at 8 GHz (gain = 4.5 dB, ηadd= 23 percent). The four-chip device (WG= 48 mm) has developed 15 W at 5 GHz (gain = 8 dB, ηadd= 30 percent).     

GaAs自对准高温栅全离子注入运放差分输入电路研究

本文主要从事GaAs自对准高温栅全离子注入技术(SAG)的研究,并以此工艺为基础,制作了WSi_xN_y/GaAs SBD,栅长分别是0.8μm和0.5μm的MESFET和GaAs.高速运算放大器差分输入电路.其中制造的耗尽型MESFET,栅长0.8μm,栅宽25μm,夹断电压V_P=-2.5V,跨导gm达170mS/mm栅宽,饱和压降V_(dss)仅0.7V,漏源击穿电压BV_(dx)达6V.制造的GaAs运放差分输入电路,最大直流增益30dB,在1GHz下仍有29dB的增益,平均直流增益22dB,输入失偏较小,电源8～12V可调,其性能达国外1985年实验室研制水平.在电路设计中,采用SPICE3a7程序,成功地进行了GaAs差分输入电路模拟和设计.     

Silicon carbide high-power devices

In recent years, silicon carbide has received increased attention because of its potential for high-power devices. The unique material properties of SiC, high electric breakdown field, high saturated electron drift velocity, and high thermal conductivity are what give this material its tremendous potential in the power device arena. 4H-SiC Schottky barrier diodes (1400 V) with forward current densities over 700 A/cm² at 2 V have been demonstrated. Packaged SITs have produced 57 W of output power at 500 MHz, SiC UMOSFETs (1200 V) are projected to have 15 times the current density of Si IGBTs (1200 V). Submicron gate length 4H-SiC MESFETs have achieved f_max=32 GHz, f_T=14.0 GHz, and power density=2.8 W/mm @ 1.8 GHz. The performances of a wide variety of SiC devices are compared to that of similar Si and GaAs devices and to theoretically expected results     

Effects of neutral buried p-layer on high-frequency performance ofGaAs MESFETs

Fully ion-implanted n⁺ self-aligned GaAs MESFETs with Au/WSiN refractory metal gates have been fabricated by adopting neutral buried p-layers formed by 50-keV Be-implantation. S-parameter measurements and equivalent circuit fittings are discussed. When the Be dose is increased from 2×10¹² cm^-2 to 4×10¹² cm^-2, the maximum value of the cutoff frequency with a 0.2-μm gate falls off from 108 to 78 GHz. This is because a neutral buried player makes the intrinsic gate-source capacitance increase markedly, while its influence on gate-drain capacitance and gate-source fringing capacitance is negligible. The maximum oscillation frequency recovers, however, due primarily to the drain conductance suppression by the higher-concentration buried p-layer. An equivalent value of over 130 GHz has been obtained for both 0.2-μm-gate GaAs MESFETs     

S波段脉冲大功率SiC MESFET

采用自主开发的3英寸(75mm)SiC外延技术和SiC MESFET的设计及工艺加工技术,成功地实现了S波段中长脉宽条件下(脉宽300μs,占空比10%),输出功率大于200W,功率增益大于11dB,功率附加效率大于30%的性能样管,脉冲顶降小于0.5dB,实现了大功率输出条件下的较高功率增益和功率附加效率及较小的脉冲顶降,初步显示了SiC功率器件的优势。器件设计采用多胞合成技术,为减小引线电感对功率增益的影响,采用了源引线双边接地技术;为提高器件的工作频率,采用了电子束写栅技术;为提高栅的可靠性,采用了加厚栅金属和国家授权的栅平坦化发明专利技术;同时采用了以金为主体的多层难熔金属化系统,提高了器件的抗电迁徙能力。