共查询到19条相似文献,搜索用时 125 毫秒
1.
BPT-1型火焰喷涂枪对零件表面的喷涂代替了原氧乙炔黄铜堆焊活塞表面。保证了表面焊层质量并提高了生产效益,为喷涂代替堆焊开辟了新的工艺途径。 相似文献
2.
3.
4.
5.
电弧喷涂金属层外加封闭涂料复合涂装技术 总被引:1,自引:0,他引:1
1 概述国外在60年代已普遍利用火焰线材喷涂锌、铝的方法对大面积钢材进行长效防腐.但喷涂过程中,存在能量利用率低、 基体温度高、工件易变形、金属丝烧损、喷涂层应力大、结合力低等缺点.同时需要消耗大量的氧气和乙炔气,使工程实施受到一定的限制.80年代,出现了新型电弧喷枪,它克服了上述缺点,在涂层结合强度、防腐(?)性能,生产效率、经济成本等方面,均优于火焰线材喷涂,在大面积防腐领域出现了电弧喷涂取代火焰喷涂趋势.总之,用电弧喷涂进行大面积防腐在国外已得到应用.目前我国每年长效防腐面积仅为捷克的1/10,主要采用国外六、七十年代使用的氧-乙炔火焰喷涂,随着技术和设备不断改进,电弧喷涂技术已在国内逐渐开发应用. 相似文献
6.
7.
8.
以超细(5~15μm)WC-10Co4Cr粉末为热喷涂粉末,采用低温超音速火焰喷涂(LT-HVOF)技术制备了WC-10Co4Cr涂层,采用SEM,XRD,3D表面轮廓仪和显微硬度仪对LT-HVOF WC涂层的显微结构和性能进行了表征,并将其与HVOF WC-10Co4Cr涂层进行了对比.结果表明:LT-HVOF制备的WC-10Co4Cr涂层的显微结构和显微硬度与HVOF制备的WC-10Co4Cr涂层的相当,其表面粗糙度为1.22μm,远低于HVOF涂层(3.18 μm),但其断裂韧度约为HVOF涂层的1/2.基体表面的激冷粒子分析表明,LT-HVOF WC-10Co4Cr涂层较低的断裂韧度与粒子在低温焰流中未熔化,并未充分铺展有关. 相似文献
9.
采用不锈钢热喷涂技术对矿用液压支架规格活柱表面进行修复,其目的是获得优良的矿井下的设备表面防护层。试验结果表明,用热喷涂技术修复矿用液压支架活柱表面是完全可行的。热喷涂层不但使用效果好,而且还具有工效高,质量稳定,无环境污染等优点。可取得较好的经济效益和社会效益。 相似文献
10.
11.
于月光 《广东有色金属学报》2005,(Z1)
Current situation and development tendency of thermal spraying materials in China@于月光$Beijing General Research Institute of Mining & Metallurgy Beijing 100044 , China 相似文献
12.
YU Yue-guang 《材料研究与应用》2005,15(2)
The current situations of thermal spraying materials in China are described in this paper.The thermal spraying technology in China has a great progress over tens of years. More than one hundred varieties of material products serve thermal spraying producing now. They belong to three kinds, powders,wires and rods. Technologies for producing alloy, ceramic and composite powders, alloy and cored wires,and oxide ceramic rods are applied to large-scale production. Many research and development works on advanced materials for thermal spraying are carrying out recent years. They show that the general tendencies of thermal spraying materials in China are composite or low-impurity component, ultrafine or nanosized microstructure, high properties, and specialized and systematized applications. Thermal spraying materials have great prospects with the development of saving society in China. 相似文献
13.
14.
热喷涂技术被广泛用于机械零件磨损表面的修复。由于修复层具有较高的硬度,普通的机械加工方法加工困难,生产效率较低,刀具磨损严重,采用电解磨削加工方法对Ni-Cr-B-Si自熔性合金粉末修复的机械零件表面进行了加工,通过试验得出了电解液的配比及电解磨削规范。 相似文献
15.
16.
17.
YU Yue-guang 《材料研究与应用》2005,(3):92-92
The current situations of thermal spraying materials in China are described in this paper.The thermal spraying technology in China has a great progress over tens of years. More than one hundred varieties of material products serve thermal spraying producing now. They belong to three kinds, powders,wires and rods. Technologies for producing alloy, ceramic and composite powders, alloy and cored wires,and oxide ceramic rods are applied to large-scale production. Many research and development works on advanced materials for thermal spraying are carrying out recent years. They show that the general tendencies of thermal spraying materials in China are composite or low-impurity component, ultrafine or nanosized microstructure, high properties, and specialized and systematized applications. Thermal spraying materials have great prospects with the development of saving society in China. 相似文献
18.
19.
锆与铪分离技术的研究现状及应用前景 总被引:2,自引:0,他引:2
锆铪分离技术大体分为火法分离和湿法分离,着重介绍了湿法分离的溶剂萃取法中甲基异丁酮-硫氰酸法,三辛胺法,磷酸三丁酯法和改进的N235-H2SO4法,锆铪主要在核能工业上应用,锆铪工业的发展与核能工业紧密关联,加强锆与铪分离工艺的研究,对发展锆铪材料的生产和促进我国核电和国防工业的发展具有重要的战略意义。 相似文献