Eu3+-doped BaLiZn3(BO3)3: A novel red-emitting phosphor for blue chips excited white LEDs

A series of novel red-emitting BaLiZn₃(BO₃)₃:Eu³⁺ phosphors were synthesized through the high temperature solid state reaction method. The phase composition, crystal structure, morphology and photoluminescence property of the BaLiZn₃(BO₃)₃:Eu³⁺ samples were systematically investigated. The phosphor can be efficiently excited by the near ultraviolet light (NUV) of 396 nm and blue light of 466 nm, and give out red light emission at 618 nm corresponding to the electric dipole transition (⁵D₀→⁷F₂). The optimal doping concentration of Eu³⁺ ions in BaLiZn₃(BO₃)₃ is determined to be about 3 mol%, and the concentration-quenching phenomenon arise from the electric dipole–dipole interaction. The temperature dependent luminescence behavior of BaLiZn₃(BO₃)₃:0.03Eu³⁺ phosphor exhibits its good thermal stability, and the activation energy for thermal quenching characteristics is calculated to be 0.1844 eV. The decay lifetime of the BaLiZn₃(BO₃)₃:0.03Eu³⁺ is measured to be 1.88 ms. These results suggest that the BaLiZn₃(BO₃)₃:Eu³⁺ phosphors have the potential application as a red component in white light emitting diodes (WLEDs) with NUV or blue chips.     

Fabrication and luminescent properties of red phosphor M3BO6:Eu3+(M=La,Y)

A series of red phosphors M₃BO₆:Eu³⁺ (M=La, Y) were synthesized at 1150 °C by conventional solid state reaction method and their luminescent properties were investigated. Structural characterization of the luminescent materials was carried out with X-ray powder diffraction (XRD) analysis. Photoluminescence measurements indicated that the La₃BO₆:Eu³⁺ phosphor exhibited bright red emission centered at about 612 nm 626 nm under UV excited. La₃BO₆:Eu³⁺ phosphor had better luminescent intensity than Y₃BO₆:Eu³⁺ phosphors under the same excitation and measuring conditions. It was shown that the 0.08 mol.% Eu³⁺ ions in La₃BO₆:Eu³⁺ phosphors was optimal. The color parameter indicated that La₃BO₆:Eu³⁺ phosphor was a preferable red phosphor for white LED.     

Site occupation and energy transfer in full color emitting phosphor Ba2Ca(BO3)2:Ce3+(K+),Eu2+,Mn2+

White light-emitting diodes (WLEDs) fabricated by single-phase full color emitting phosphor are an emerging solution for health lighting. The crystallographic site occupation of activators in a proper host lattice is crucial for sophisticated design of such phosphor. Here, we report a high quality white light-emitting phosphor Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ with spectral distribution covering whole visible region. Blue light emission originates from Ce³⁺ ions occupying preferentially Ba²⁺ site by controlling synthesis conditions. Green and red lights are obtained from Eu²⁺ occupying Ba²⁺ (and Ca²⁺) site and Mn²⁺ occupying Ca²⁺ site, respectively. In this triple-doped phosphor, strong red emission with a low concentration of Mn²⁺ is realized by the efficient energy transfer from Ce³⁺ and Eu²⁺ to Mn²⁺. Furthermore, high quality white light is accomplished by properly tuning the relative doping amount of Ce³⁺(K⁺)/Eu²⁺/Mn²⁺ based on efficient simultaneous energy transfer. The results indicate that Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ is a promising white light-emitting phosphor in WLEDs application.     

Combustion synthesis and luminescence properties of Ca4Y6（SiO4）60：Eu3＋ red phosphor for white LEDs

Eu3＋ activated Ca4Yt（SiO4）60 phosphors were prepared by combustion synthesis method, and their morphologies and lu- minescent properties were investigated. Field scanning electron microscopy （FSEM） confirmed that the crystallite sizes of nanoparti- cles with narrow diameter ranging from 30 to 60 rim. The excitation spectra of CaaY6（SiO4）60：Etl3＋ showed that there existed two strong excitation bands at around 399 nm （TFo----~SL6） and 469 nm （TF0---＊SD2）, which were consistent with the output wavelengths of near-UV and blue LEDs, respectively. The emission spectra of Ca4Y6（SiO4）60：Eu3＋ were dominant by a red peak located at 614 nm due to the 5Do→7TF2 transition of Eu3＋. With the increase of Eu3＋concentration, the luminescence intensity of the red phosphor reached maximum and then decreased. The optimum concentration for Eug＋in Ca4Y6（SiO4）60 was 21 mol.%.     

Enhanced luminescence efficiency and thermal stability via introduction of non-rare earth Bi3+ in Gd5Si2BO13:Eu3+

A series of Gd₅Si₂BO₁₃:Eu³⁺ and non-rare earth Bi³⁺ ions doped Gd₅Si₂BO₁₃:Eu³⁺ phosphors was successfully synthesized via high-temperature solid-state method,and the as-obtained phosphors were studied on their phase structures,luminescence characteristics,thermal stability and luminescence lifetime.Transient fluorescence spectroscopy data show that the addition of Bi³⁺ can obviously enha...     

Luminescence properties of red phosphors Ca_（10）Li（PO_4）_7：Eu~（3＋）

A series of red phosphors Ca10Li (PO4)7:Eu3+ were synthesized by high temperature solid-state reaction method. Their luminescence properties were characterized by means of photoluminescence excitation and emission spectra,CIE chromaticity and quantum efficiency. Results indicated that the phosphors could be effectively excited by the near ultraviolet (NUV) light (393 nm). The main emission peaks of the phosphor were ascribed to the transition 5D0-7F2 (613 and 617 nm) of Eu3+ ion when samples were excited by...     

Luminescence properties of YAl3（BO3）4 phosphors doped with Eu^3＋ ions

YAl3 （BO3）4： Eu^3＋ phosphors were prepared by the conventional solid state reaction. The phase structure and morphology were investigated by X-ray diffraction （XRD） and scanning electron microscope （SEM）. Doping YAl3（BO3）4： Eu^3＋ phosphors with concentration of Eu^3＋ ions of 0, 2, 5, 8 and 10 mol% were studied and their luminescent properties at room temperature were discussed. The excitation spectrum of Y0.95Eu0.05Al3（BO3）4 was composed of a broad band centered at about 252 nm and a group of lines in the longer wavelength region. In the emission spectra, the peak wavelength was about 614 nm under a 252 nm UV excitation. The optimal doping concentration of Eu^3＋ ions in YAl3（BO3）4： Eu^3＋ phosphors was 8 mol%.     

Synthesis and enhanced photoluminescence properties of red emitting divalent ion (Ca2+) doped Eu:Y2O3 nanophosphors for optoelectronic applications

This work presents the synthesis of Y₂O₃:Eu³⁺,xCa²⁺ (x = 0 mol%, 1 mol%, 3 mol%, 5 mol%, 7 mol%, 9 mol%, 11 mol%) nanophosphors with enhanced photoluminescence properties through a facile solution combustion method for optoelectronic, display, and lighting applications. The X-ray diffraction (XRD) patterns of the proposed nanophosphor reveal its structural properties and crystalline nature. The transmission electron microscope (TEM) results confirm the change in the shape of the particle and aggregation of particles after co-doping with Ca²⁺. Fourier transform infrared spectroscopy (FTIR) and Raman vibrations also confirm the presence of Y–O vibration and subsequently explain the crystalline nature, structural properties, and purity of the samples. All the synthesized nanophosphors samples emit intense red emission at 613 nm (⁵D₀→⁷F₂) under excitation with 235, 394 and 466 nm wavelengths of Eu³⁺ ions. The photoluminescence (PL) emission spectra excited with 235 nm illustrate the highest emission peak with two other emission peaks excited with 466 and 394 nm that is 1.4 times higher than 466 nm and 1.9 times enhanced by 394 nm wavelength, respectively. The emission intensity of Y₂O₃:Eu³⁺,xCa²⁺ (5 mol%) is increased 8-fold as compared to Eu:Y₂O₃. Doping with Ca²⁺ ions enhances the emission intensity of Eu:Y₂O₃ nanophosphors due to an increase in energy transfer in Ca²⁺→Eu³⁺ through asymmetry in the crystal field and by introduction of radiative defect centers through oxygen vacancies in the yttria matrix. It is also observed that the optical band gap and the lifetime of the ⁵D₀ level of Eu³⁺ ions in Y₂O₃:Eu³⁺,xCa²⁺ nanophosphor sample gets changed with a doping concentration of Ca²⁺ ions. Nanophosphor also reveals high thermal stability and quantum yield as estimating activation energy of 0.25 eV and 81%, respectively. CIE, CCT, and color purity values (>98%) show an improved red-emitting nanophosphor in the warm region of light, which makes this material superior with a specific potential application for UV-based white LEDs with security ink, display devices, and various other optoelectronics devices.     

Effect of Eu3+ doping on luminescence properties of a KAlSiO4:Sm3+ phosphor

This study presents the photoluminescence characteristic analysis of a series of red phosphors of KAlSiO₄:1.5 mol%Sm³⁺,x mol%Eu³⁺ (x = 2, 3, 4, 5, 6, 7) prepared via high-temperature solid-phase reaction. The results show that the X-ray diffraction (XRD) refinement results are reliable. The unit cell parameters and volume gradually decrease as the Eu³⁺ concentration increases, resulting in a grain size reduction of 10.22%. When x = 6, the emission peaks of Sm³⁺ at 564, 601, and 651 nm disappear completely, and the corresponding full width at half maximum becomes 0. At 610 nm, the emission peak intensity of Eu³⁺ is increased by a factor of 4.8. The resonant non-radiative energy transfer effect is greater than the co-excitation effect. A maximum energy transfer efficiency of 97.8% is achieved. The integral area at 610 nm is as high as 85%. The color purity of the phosphor is as high as 92.97%, and the internal quantum yield gradually changes from 32% to 51%. Ultimately, these results confirm that the silicate phosphor is suitable for the red component in the three primary color phosphors of white light-emitting diodes.     

Single-phase white-emitting and tunable color phosphor Na3Sc2(PO4)3:Eu2+,Dy3+: Synthesis,luminescence and energy transfer

A series of Eu²⁺/Dy³⁺ single doped and co-doped Na₃Sc₂(PO₄)₃ phosphors were synthesized by the high-temperature solid-state method, and their phase, morphology, and luminescence properties were characterized. Under the excitation of 370 nm, the Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor can emit white light whose spectrum is composed of a broad emission band centered at 460 nm and the other three peaks at 483, 577, and 672 nm, respectively. There is energy transfer from Eu²⁺ to Dy³⁺ ion in Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor due to the good overlap between the emission spectrum of Na₃Sc₂(PO₄)₃:Eu²⁺ and the excitation spectrum of Na₃Sc₂(PO₄)₃:Dy³⁺, which is further confirmed by the fluorescence lifetime decrease of Eu²⁺ ion with the increase of Dy³⁺ concentration. The process of energy transfer is via dipole–quadruple interaction which is confirmed by applying Dexter's theory. By increasing the Dy³⁺ concentration, the color coordinates of the Na₃Sc₂(PO₄)₃:0.01Eu²⁺,xDy³⁺ phosphors can be adjusted from blue to white, and then to yellow. The optimized concentration of Dy³⁺ ions is 4.0 mol%, beyond which the concentration quenching will take place. The Na₃Sc₂(PO₄)₃:Eu²⁺,Dy³⁺ phosphor shows fairly good resistance to thermal quenching behavior, of which the emission intensity at 423 K can maintain 90.3% of the initial value (298 K). These results suggest that the Na₃Sc₂(PO₄)₃:0.01Eu²⁺,xDy³⁺ phosphors have potential applications as the color-tunable or a single-phase white emitting phosphor in white LEDs.     

A green-yellow emitting β-SreSiO4：Eu^2＋ phosphor for near ultraviolet chip white-light-emitting diode

Sr2SiO4：xEu^2＋ phosphors were synthesized through the solid-state reaction technique. The crystal phase of Sr2SiO4：xEu^2＋ phosphor manipulated by Eu^2＋ concentration was studied. The phase transited from β to α＇ in Sr2SiO4：xEu^2＋ phosphor with increasing europium concentration. The single β phase was formed as x≤005 and changed α＇ phase when x〉0.01. The emission spectrum of the β-Sr2SiO4：Eu^2＋ phosphor consisted of a green-yellow broadband peaking at around 540 nm and a blue band at 470 nm under near ultraviolet excitation. The white LEDs by combining near ultraviolet chips with β-Sr2SiO4：Eu^2＋ phosphors were fabricated. The luminous efficiency （15.7lm/W） was higher than α＇-Sr2SiO4：Eu^2＋ phosphor white LED.     

Samarium doped apatite-type orange-red emitting phosphor Ca_5(PO_4)_2SiO_4 with satisfactory thermal properties for n-UV w-LEDs

A novel single-phase Sm~(3+) activated Ca_5(PO_4)_2SiO_4 phosphor was successfully fabricated via a conventional solid-state method, which can be e fficie ntly excited by near ultraviolet(n-UV) light-emitting chips.The crystal structure and luminescence properties were characterized and analyzed systematically by using relevant instruments. The Ca_5(PO_4)_2SiO_4:Sm~(3+) phosphor shows an orange-red emission peaking at600 nm under the excitation of 403 nm and the optimal doping concentration of Sm~(3+) is determined to be 0.08, The critical distance of Ca_5(PO_4)_2SiO_4:0.08 Sm~(3+) is calculated to be 1.849 nm and concentration quenching mechanism of the Sm~(3+) in Ca_5(PO_4)_2SiO_4 host is ascribed to energy transfer between nearestneighbor activators. The decay time of Ca_5(PO_4)_2 SiO_4: 0,08 Sm~(3+) is determined to be 1.1957 ms. In addition, the effect of temperature on the emission intensity was also studied, 72.4% of the initial intensity is still preserved at 250 ℃, better thermal stability compared to commercial phosphor YAG:Ce~(3+) indicates that Ca_5(PO_4)_2SiO_4:0.08 Sm3+ has excellent thermal stability and active energy is deduced to be 0.130 eV.All the results demonstrate that orange-red emitting Ca_5(PO_4)_2SiO_4:0.08 Sm~(3+) phosphor exhibits good luminescent properties. Owing to the excellent thermal quenching luminescence property,Ca_5(PO4)_2SiO_4:0.08 Sm~(3+) phosphor can be applied in n-UV white light emitting diodes and serve as the warm part of white light.     

BaEMg（BOa）2：Ce^3＋,Eu^2＋,Na^＋： A potential single-phased two colour borate phosphor for white light-emitting diodes

A two colour phosphor Ba 2 Mg(BO3)2:Ce3+,Eu2+,Na+ was synthesized using solid-state reaction method.Luminescence of Ba2Mg(BO3)2:Ce3+,Eu2+,Na+ showed 416 and 618 nm emission bands attributed to Ce3+ and Eu2+ emission, respectively. Energy transfer occurred from Ce3+ to Eu2+ through a significant overlap of Eu 2+ excitation spectrum with Ce3+ emission spectrum in Ba 2 Mg(BO3)2. They also showed that under the excitation of UV radiation, bluish or yellowish white light was generated by coupling a broad blue emission band and a red emission band.By combining with green phosphor, Ba2Mg(BO3 ):Ce3+,Eu2+,Na+ phosphor showed potential application for white light-emitting diodes (LEDs).     

Physicochemical properties of Li3Ba2La3(MoO4)8:Eu,Tb red-emitting phosphor for solid state white lamps

In this work,combustion synthesis was used for the first time to fabricate a phosphor material with red emission for applications in solid-state white-light lamps.We synthesized a material with emission wavelength at λ_em=617 nm,excited under long UV-blue wavelength based on Eu³⁺,Tb³⁺-activated molybdates Li₃Ba₂(La_1-x-yEu_xTb_y)₃(MoO₄)₈ with 0 ≤ x ≤1 and 0 ≤ y ≤ 1.A series of pow...     

Gd3+ ion induced UV upconversion emission and temperature sensing in Tm3+/Yb3+:Y2O3 phosphor

Cubic phase Tm³⁺/Yb³⁺:Y₂O₃ and Tm³⁺/Yb³⁺/Gd³⁺:Y₂O₃ phosphors were prepared by low temperature combustion technique for upconversion emission in UV-visible range.The 980 nm excitation has generated UV emission at 314 nm in tridoped phosphor due to the energy transfer from Tm³⁺ to Gd³⁺ion.Characteristic emission bands from Tm³⁺ are also observed in both the phosphors....     

A single-phase full-color phosphor Sr2Ca2La(PO4)3O:Eu2+,Tb3+,Mn2+: Photoluminescence and energy transfer

A single-phase full-color emitting phosphor Sr₂Ca₂La(PO₄)₃O:Eu²⁺,Tb³⁺,Mn²⁺ was synthesized by the high temperature solid-state method. The phase formation, luminescence properties, thermal stability, and energy transfer from Eu²⁺ to Tb³⁺ and Eu²⁺ to Mn²⁺ in Sr₂Ca₂La(PO₄)₃O were investigated in details. Tunable emission color from blue to blueish green or orange can be observed under 365 nm near-ultraviolet excitation based on the energy transfer from Eu²⁺ to Tb³⁺ or Mn²⁺ ions by varying the ratio of Eu²⁺/Tb³⁺ or Eu²⁺/Mn²⁺ ions. White light was obtained with chromaticity coordinates of (0.3558, 0.3500) in the Sr₂Ca₂La(PO₄)₃O:0.04Eu²⁺,0.08Tb³⁺,0.40Mn²⁺ phosphor, suggesting their potential applications in white light emitting diodes.     

Photoluminescent properties of Ca2Gd8（SiO4）6O2： Dy^3＋ phosphor films prepared by sol-gel process

There are growing interests on phosphor thin films owing to their potential application in high-resolution devices such as cathode ray tubes and flat panel display devices. The solution-based sol-gel method is one of the most important techniques for the synthesis of various functional coating films. Compounds with the apatite structure are very suitable host lattices for various luminescent ions. Ca2RE8（SiO4）6O2 （ RE=Y, Gd, La ） is a kind of ternary rare-earth-metal silicate with oxyapatite structure, which has been used as host material for the luminescence of various rare earth and mercury-like ions. In this article, Ca2Gd8（SiO4）6O2：Dy^3＋phosphor films were dip-coated on quartz glass substrates through the sol-gel process. X-ray diffraction （XRD）, atomic force microscopy （AFM）, photoluminescence （PL） spectra, as well as lifetimes were used to characterize the resulting films. AFM study revealed that the phosphor films consisted of homogeneous particles. The Dy^3＋ showed its characteristic emission in crystalline phosphor films, i.e., ^4F9/2-^6H15/2 and ^4F9/2-^6H13/2.     

Multi-site occupancies and luminescence properties of cyan-emitting Ca9-xNaGd2/3(PO4)7:Eu2+phosphors for white light-emitting diodes

Cyan-emitting Ca₉NaGd_2/3(PO₄)₇:Eu²⁺phosphors were synthesized via high temperature solid-state route.X-ray powder diffraction(XRD)and scanning electron microscopy(SEM)were used to verify the phase and morphology of the Ca₉NaGd_2/3(PO₄)₇:Eu²⁺(CNGP:Eu²⁺)phosphors.The as-obtained phosphor exhibits a broad excitation band of 250-420 nm,which is near the ultraviolet region.An intense asymmetric cyan emission at 496 nm corresponds to the 5 d-4 f transition of Eu²⁺.The multiplesite luminescent properties of Eu²⁺ions in CNGP benefit from versatile structure ofβ-Ca3(PO4)2 compounds.The effective energy transfer distance is 5.46 nm(through the spectral overlap calculation),validating that the resonant energy migration type is via dipole-dipole interaction mechanism.Compared to the initial one at room temperature,the luminescent intensity of CNGP:Eu²⁺phosphor can maintain 77%as it is heated up to 420 K.A white light-emitting diode(WLED)with excellent luminesce nt properties was successfully fabricated.Moreover,the CIE chromaticity coordinates of fabricated WLED driven by changing current just change slightly.     

Eu2＋ and Dy3＋ codoped （Ca,Sr）7（SiO3）6Cl2 highly efficient yellow phosphor

Eu2+ and Dy3+ codoped(Ca,Sr)7(SiO3)6Cl2 yellow phosphors were successfully synthesized by self-flux method. The structure, morphology and photoluminescence properties were investigated by X-ray diffraction(XRD), scanning electron microscopy(SEM) and photoluminescence spectra. The as-prepared phosphor showed a broad emission spectrum centered at 550 nm for Eu2+single-doped phosphor, while located at 548–544 nm for the Eu2+, Dy3+ codoped samples under excitation at 380 nm light. The emission intensity was greatly improved when Dy3+ was doped into the(Ca,Sr)7(SiO3)6Cl2:Eu2+ system. The composition-optimized sample with 3 mol.% of Dy3+ and constant 10 mol.% of Eu2+ exhibited a 220% PL enhancement compared to the phosphor with 10 mol.% Eu2+ single-doped. Meanwhile, it was found that the quantum efficiency of phosphor namely(Ca,Sr)7(SiO3)6Cl2:3 mol.% Dy3+, 10 mol.% Eu2+ could get up to 24.6%. The synthesized yellow-emitting(Ca,Sr)7(SiO3)6Cl2:Dy3+,Eu2+ is a promising candidate as high-efficiency yellow phosphor for NUV-excited white LEDs.     

Luminescence investigation of Eu~（3＋）-Bi~（3＋） co-doped CaMoO_4 phosphor

A series of Eu³⁺-Bi³⁺ co-doped CaMoO₄ red phosphors were synthesized via the solid-sate reaction method. The crystal structures of the obtained samples were identified by X-ray powder diffraction (XRD). The photoluminescence property was investigated, and the results showed that the intensity of excitation spectra and emission spectra could be changed with different doping ratios of Bi³⁺/Eu³⁺. The proposed explanation of these changes was from the energy transfer between Bi³⁺ and Eu³⁺ and the unbalanced charge from the substitution of Eu³⁺ and Bi³⁺ for Ca²⁺ in CaMoO₄. The obtained samples are a promising red light emitting phosphor for the needs of different excitation sources with near-UV and blue GaN-based chips.