首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
B4C是一种重要的工业材料,被广泛应用于零件加工、航空航天、装甲防护和核工业领域。放电等离子烧结是一种通过多场耦合作用来实现材料低温快速烧结的技术。本文综述了近几年来放电等离子烧结制备B4C陶瓷的研究现状,阐述了放电等离子烧结的基本原理和特点,着重分析了不同原料粉末和不同烧结工艺参数对B4C结构和性能的影响,最后对放电等离子烧结B4C陶瓷的发展做出了展望。  相似文献   

2.
金属多孔材料是一种新兴功能材料,具有良好的渗透性、规则的孔道结构、独特的力学、吸附及光电性能等诸多优点。利用放电等离子烧结技术(spark plasma sintering,SPS)制备金属多孔材料具有升温速度快,高效干洁等优点。本文简述了放电等离子烧结技术在材料制备中的应用,讨论了放电等离子烧结参数对金属多孔材料的影响,并对放电等离子烧结制备金属多孔材料的应用现状及前景做出了展望。  相似文献   

3.
烧结方法对WC-Co硬质合金性能的影响   总被引:1,自引:0,他引:1  
以原位还原碳化反应法制备的超细WC-Co复合粉为原料,分别采用放电等离子烧结、低压烧结和真空烧结工艺获得块体硬质合金,系统研究烧结方法对合金的显微组织、密度及力学性能的影响。结果表明:放电等离子烧结的合金中,主相为WC和Co,有少量η相(Co6W6C),低压烧结和真空烧结获得的合金中物相为WC和Co;所用3种不同的烧结方法均能获得细晶块体硬质合金,其中放电等离子烧结的晶粒最细为0.35μm;低压烧结合金具有优异的综合性能,HV30为15 121 MPa,断裂韧性为13.6 MPa.m1/2,横向断裂强度为4 210 MPa。  相似文献   

4.
以平均粒径约150μm的球形钛粉为原料,采用高能球磨结合放电等离子烧结技术制备由双尺度晶粒组成的高致密纯钛块体材料,研究高能球磨过程中钛粉的形貌、尺寸及显微组织的变化,分析球磨钛粉放电等离子烧结时的致密化行为和显微组织的演变规律,测试烧结钛块体材料的室温压缩性能。结果表明:钛粉在球磨初期发生剧烈的塑性变形并相互焊合,形成层片状团聚粉末。球磨10 h时,钛粉的部分晶粒细化至40~100 nm。放电等离子烧结过程中,随烧结温度升高和烧结时间延长,烧结钛的密度逐渐增大。在烧结温度为800℃、保温时间为4 min、烧结压力为50 MPa的条件下,烧结钛的密度达到4.489 g/cm3,接近全致密,其显微组织由双尺度的等轴晶组成,细晶区晶粒尺寸为1~2μm,粗晶区晶粒尺寸为5~20μm,二者呈层状交替分布;该试样在室温压缩条件下的综合力学性能与铸锻Ti-6Al-4V合金相当。  相似文献   

5.
本文研究了放电等离子烧结的温度、压力、保温时间对Mn_3O_4的结构、致密度和介电性能的影响。借助X射线衍射仪、扫描电子显微镜、阻抗仪等对放电等离子烧结后的Mn_3O_4的结构和性能进行了表征,利用阿基米德原理测量了样品的密度。结果表明,保温时间对Mn_3O_4的物相、结构和性能影响最大,其次依次是烧结温度和烧结压力。实验结果表明,烧结温度700℃、烧结压力70 MPa、保温时间5 min获得的材料的致密度最高,可达95%,而且样品的介电性能最好,相对介电常数可达252。  相似文献   

6.
采用不同的烧结温度和烧结压力对Ti-6Al-4V-0.5In钛合金汽车零件试样进行放电等离子烧结处理,研究了烧结工艺对试样耐磨损性能和冲击性能的影响。结果表明:随烧结温度的提高和烧结压力的增大,试样的耐磨损性能和冲击性能均先提高后下降。钛合金汽车零件材料的烧结温度优选为875℃,烧结压力优选为45 MPa。  相似文献   

7.
详细介绍了放电等离子烧结技术的烧结机理和工艺特点,重点阐述了各个工艺参数对其烧结性能的影响。  相似文献   

8.
配碳量对放电等离子烧结无粘结剂纳米WC硬质合金的影响   总被引:3,自引:0,他引:3  
研究了配碳量对放电等离子烧结制备无粘结剂纳米WC硬质合金的烧结行为、相组成、致密度、硬度及晶粒大小的影响。结果表明:纯纳米WC粉直接烧结,样品的晶粒度为300~400nm,致密度及硬度均较高,但主相变为缺碳相WC1-x和W2C配碳量为0.05%~0.25%时,样品中有少量缺碳相;配碳量为0.40%时,可以正确成相;配碳量为0.50%时,则出现游离碳;粉末配碳球磨后,因烧结过程提前到较低温度下完成,1800℃烧结时晶粒急剧长大且不均匀。  相似文献   

9.
放电等离子烧结制备铁基大块非晶材料   总被引:2,自引:1,他引:1  
以惰性气体雾化的非晶铁基粉末为原料,采用放电等离子烧结技术(SPS)制备大块非晶材料.探索了SPS烧结温度对烧结体的物相、相对密度、微观结构和性能的影响.试验表明,采用优化的SPS烧结工艺,用粉末冶金的方法,可以获得致密的大块非晶材料,部分性能与铸态相当.  相似文献   

10.
以AlN和W粉为原料,采用放电等离子烧结技术,在1 400~1 700℃、30MPa的工艺条件下制备了AlN-W复合陶瓷.采用扫描电镜、能谱分析仪、安捷伦精密阻抗分析仪4284A等对复合陶瓷的微观组织、介电常数、微波损耗进行了表征,研究了影响复合陶瓷微波损耗性能的因素.结果表明,AlN粉末颗粒细小、烧结保温时间增加,有...  相似文献   

11.
Some theories of personality hold that an individual's perception of others is influenced by his own personality characteristics; more specifically, that a trait of low social value will be projected more into others, and that insight into the possession of these characteristics reduces this distortion. These 2 hypotheses were tested by having a group of college students rate each other (including themselves) on degree of friendliness or hostility. Agreement with group rating about self yielded the insight score. In general, the hypotheses were supported; the "friendly" Ss were most accurate in their perception of others, and insight was positively associated with accurate perception. From Psyc Abstracts 36:04:4HL16M. (PsycINFO Database Record (c) 2010 APA, all rights reserved)  相似文献   

12.
The rates of infection of two methods of external ventricular drainage in use at Atkinson Morley's Hospital--namely, (a) percutaneous drainage with Rickham reservoirs and (b) tunnelled ventriculostomies--were compared in this retrospective review. Percutaneous drainage of CSF with Rickham reservoirs was associated with a 27% rate of infection as identified by positive microbiological cultures; tunnelled ventriculostomy catheters had a 10% infection rate. The difference in the infection rate between the two methods was statistically significant (P < 0.015). Other variables examined, including the age and sex of the patients and the reasons for ventricular drainage, were not associated with an increased rate of infection. Most infections from either method were caused by a coagulase negative staphylococcus. The average duration of ventricular drainage before identification of positive cultures was 5.7 days for Rickham reservoirs and 6.0 days for ventriculostomies.  相似文献   

13.
鲁迅先生一生热爱美术作品,对版画中木刻兴趣尤甚.<野草>作为其"写心之作",亦呈现出一些与木刻版画一致的审美特征:一是具有木刻版画的色彩特征,多对比、多冷色,有阴郁的美感;二是具有木刻版画的力度特征,环境描写、人物刻画处处刀锋毕现,遒劲有力,有一种"力之美".  相似文献   

14.
张兴强  叶运福 《冶金设备》2005,(6):71-72,47
针对四辊破碎机车刀架车削中存在的几个问题,详细介绍了电动车刀架的结构和工作原理,建立主要设计参数的数学表达式,并进行适当的分析。改造后,这种电动车刀架运行平稳、可靠、方便、省力,取得了预期的效果。  相似文献   

15.
转炉炉壳热应力分析   总被引:5,自引:1,他引:4  
任学平  郭志强  邹家祥 《炼钢》2001,17(6):47-49
根据实际转炉建立实体模型。以有限元为手段,考虑了炉衬和炉壳材料的物性参数随温度变化的特点和炉衬与炉壳之间膨胀间隙,计算了转炉炉壳在温度载荷和炉衬膨胀压力同时作用下的热应力。所得结果可为转炉炉壳设计提供依据。  相似文献   

16.
In this paper is treated the fundamental problematic of the fracture of the diaphysis of the tibia and the therapeutic results after the conservative and operative treatment are confronted. Among 518 patients with 433 open fractures and 35 with closed fractures of the diaphysis of the tibia, successful treatment of more 2/3 was obtained in the period from 1968 to 1972. Following our casuistics and literature, whose results are similar, we find out that the average total treatment of the osteosynthesis of the fracture of the diaphysis was shortened for 2,5 months depending upon the type and the localisation of the fracture. Apolied methods of the operative and conservative and conservative treatment in relation to the velocity of the medical cure as well as to the extreme anatomical-functional results are analised. We noticed that osteosynthesis, made by the intermedullary nail and the extension of the canals or by a small AO table, by the achieved stability makes conditions of immediate motions and an early rehabilitation. Because of that it gives the best functional results.  相似文献   

17.
18.
通过对焦炭在高炉内的历程及其变化规律的剖析,阐述焦炭热性能指标的意义,形象地把焦炭在高炉内的损耗分为三部分(M1,M2,M3)。指出M2对焦比及焦炭价格有一定的指导作用。  相似文献   

19.
Cancer of the cardia is traditionally discussed with cardiac cancer of the lower portion of the esophagus and upper gastric cancer invading the esophagus, and the specific characteristics of cancer of the cardia have never been clearly defined. We reviewed the outcome of 172 patients with adenocarcinoma of the cardia who had undergone radical surgery between 1949 and 1994 in the Division of Gastrointestinal Surgery of the Cancer Institute Hospital. The centers of the tumors were located within 2 cm above and below the boundary between the esophagus and the stomach, and their longitudinal diameter was less than 8 cm. We divided the patients into an early period (1949-1979; n = 79) and a late period (1980-1994; n = 93), and focused on the historical transition. There were no differences in patient gender or histology between the two periods. However, the late period was associated with fewer cases of esophageal invasion and shorter longitudinal diameter, as the age of the population advanced. The number of advanced cancers such as the localized and infiltrative type had decreased, and early cancer and early clinical stage had become more common, but despite the fact that the number of early cancers had increased, extended dissection, such as thoracic and paraaortic lymph node dissection, was performed more frequently. By clinical stage, the long-term outcome markedly improved in Stage I patient in the late period, and tended to improve in Stage II and III patients. This appears to have been attributable to the prevention of micrometastasis by extended dissection, although the number of early cancers is another major potential cause. There were no differences in the outcome of Stage IV patients between the two periods, and further advances in multimodality therapy must be awaited. The range of resection is basically proximal gastrectomy, and if there are adequate indications, the prognosis is favorable. In view of the status of lymphatic flow and lymph node metastasis, and long-term results, lateroaortic lymph node dissection is important. Since the number of early cancer patients has been increasing, if intraabdominal recurrence is prevented, intrathoracic lymph node dissection will contribute greatly to the outcome of such patients.  相似文献   

20.
为了编制实用性强的基地建设行动方案,首先,确定参与式发展的主体,搭建一个"决策框架";其次,针对行动目标,提出不同参与主体,如管理者、农民、消费者等团队与个人的目标及行动内容;最后,工作应向重塑伙伴式合作关系,挖掘农民自我发展潜力,完成三大角色的转换,打造农业基地文化等方向推进.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号