Au/Ni/Al/Ti/AlxGa1-xN/GaN和Au/Pt/Al/Ti/AlxGa1-xN/GaN欧姆接触研究

研究并对比了Ti/Al/Ni/Au和Ti/Al/Pt/Au多层金属膜与未掺杂的Al0 .2 2 Ga0 .78N/GaN(i AlGaN/GaN)异质结构之间的欧姆接触性质。在退火温度低于 70 0℃时 ,两种接触样品上都不能得到欧姆接触。随着退火温度的升高 ,85 0℃快速退火后 ,在Ti/Al/Ni/Au接触上获得了 1.2 6×10 - 6 Ω·cm2 的比接触电阻率 ,在Ti/Al/Pt/Au接触上获得了 1.97× 10 - 5Ω·cm2 的比接触电阻率。研究结果表明 ,金属与半导体接触界面和Al0 .2 2 Ga0 .78N异质结构界面载流子沟道之间适当的势垒的存在对高质量欧姆接触的形成起重要作用 ,势垒的宽度取决于退火温度以及退火的具体进程。对Ti/Al/Ni/Au和Ti/Al/Pt/Au欧姆接触比接触电阻率的差异进行了解释。     

Effect of metal doping into Ce0.5Zr0.5O2 on catalytic activity of MnOx/Ce0.5–xZr0.5–xM0.2xOy/Al2O3 for benzene combustion

The research investigated the effect of doping two metals separately or together into Ce0.5Zr0.5O2 on the catalytic activity of MnOx/Ce0.5-xZr0.5-xM0.2xOy/Al2O3 （M=Y, Mn, Y and Mn） for catalytic combustion of benzene. The prepared catalysts were characterized by X-ray diffraction （XRD）, surface area analysis, oxygen storage capacity （OSC）, and H2-temperature programmed reduction （H2-TPR）. Catalytic test was performed on a conventional fixed bed flow reactor. The characterization results revealed that Y and Mn ions entered into the ceria-zirconia mixed oxides framework, which improved the textural properties and greatly promoted the MnOx dispersion on the support surface. The complete conversion temperature of benzene on MnOx/Ce0.4Zr0.4Y0.1Mn0.1Oy/Al2O3 was 563 K, and the selectivity of carbon dioxides was 99%. This catalyst could be applied in a wide range of GHSV and wide concentration condition, showing great potential for application.     

Superconducting Transition Temperature in YBa2Cu4O8/La2/3 Ca1/3 MnO3 / YBa2 Cu4O8 Heterostructure

YBa2Cu4O8/La2/3 Ca1/3 MnO3/YBa2Cu4O8 （ Y-124/LCMO/Y- 124） heterostructure was prepared by facing-target sputtering technique. The oscillatory superconducting transition temperature was observed when the thickness of LCMO d L is larger than critical thickness d L^CR. The metal-insulator transition temperature can only be detected at d L 〉 d L^CR. The dependence on the spacer layer in LCMO/Y-124 systems suggests strongly the interplay of ferromagnetic and superconducting couplings.     

锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2研究进展

介绍了比容量高、循环性能优异、成本较低的LiNil/3Co1/3Mnl/3O2正极材料近年来在合成技术及其掺杂改性、表面修饰等方面所取得的成果和进展,并对其未来的发展趋势进行了展望。     

Effect of Zn Doping on Transport Properties of La2/3 Sr1/3 Mn1 - x Znx O3 Films

La2/3 Sr1/3 Mn1-x ZnxO3films （x =0.05, 0.1,0.3, and 0.5） were prepared using magnetron sputtering method, and the effect of Zn doping on transport properties of the films was studied. An analysis of X-ray diffraction showed that the main phase of the bulk target was orthorhombic and the films had better epitaxial character. It was found that the films with x =0.05 and x =0.1 exhibited typical insulator-metal transition. No transition of the films with x≥0.3 was observed and the dominant transport was variable-range hopping due to observable secondary phase ZnO. These could be attributed to the Zn doping effect on manganites.     

热压烧结制备Li3/8Sr7/16Ta3/4Hf1/4O3钙钛矿型固体电解质

采用热压烧结制备了Li_3/8Sr_7/16Ta_3/4Hf_1/4O₃钙钛矿型固体电解质, 研究了不同烧结方式对样品性能的影响。通过X射线衍射仪表征材料的晶体结构, 扫描电子显微镜观察组织形貌, 交流阻抗仪测试电化学性能。结果表明:样品为立方KTaO₃相, 热压烧结成功合成了钙钛矿结构固体电解质, 相对于常压烧结, 热压烧结制备的样品孔隙更少, 晶粒之间结合更加紧密, 致密度高达94.0%, 离子电导率为4.33×10-4S·cm(T=298K).      

LiNi1/3Co1/3Mn1/3O2正极材料的合成与性能

采用共沉淀-高温固相法制备LiNi_1/3Mn_1/3Co_1/3O₂正极材料,利用XRD和SEM对所制试样的晶体结构和形貌进行表征,研究了烧结温度对材料电化学性能的影响.结果表明,焙烧温度为850 ℃制备的材料具有较好电化学性能,在25 ℃,电压范围为2.75~4.2 V,1 C充电6 C放电下首次放电比容量为124.2 mAh/g,50次循环后容量保持率为95.2 %.      

Catalytic combustion of diesel soot over K2NiF4-type oxides La2-xKxCuO4

Nanostructure K2NiF4 type oxides La2-xKxCuO4 complex oxides were prepared using the Sol-Gel method, characterized by X-Ray Diffraction （XRD）, Fourier Transform Infrared （FT-IR）, and Scanning Electron Microscopy （SEM）. The catalytic activity for soot combustion was evaluated by the Temperature-Programmed Reaction （TPO） technique. The results demonstrated that the substitution quality of K^＋ for La^3＋ at the A-site would increase the catalytic activities of La2-xKxCuO4 for soot combustion greatly; the substitution quality affected the structure and catalytic activity obviously. The La1.8K0.2CuO4 complex oxides with tetrahedral structures had the best catalytic activity for soot combustion, and the ignition temperature of soot combustion was lowered from 490 to 320 ℃.     

Crystal Structures and Thermoelectric Properties of Sm-Filled Skutterudite Compounds Smy Fex Co4 - x Sb12

Polycrystalline samples of Sm partially filled skutterudites SmyFexCo4-xSb12 were prepared by melting and Spark Plasma Sintering technique. The results of Rietveld refinement showed that the obtained SmyFexCo4-xSb12 samples possessed filled skutterudite structures. The thermal parameter （B） of Sm is larger than that of Sb, Fe, and Co, indicating that Sm ＂rattled＂ in Sb-icosahedron voids. The effects of filling atom Sm on thermoelectric properties of these compounds were investigated. With the increase of Sm filling fraction （y）, electrical conductivity decreased, Seebeck coefficient increased and had a maximum value when y was 0.38; thermal conductivity reduced and had a minimum value when y was 0. 32. At 750 K, the highest figure of merit of 0.68 was obtained for Sm0.32Fe1.47Co2.53Sb12.     

锂过量对钙钛矿型Li3/8Sr7/16Ta3/4Hf1/4O3固体电解质性能的影响

固相烧结法合成钙钛矿型Li_3/8Sr_7/16Ta_3/4Hf_1/4O₃(LSTH) 固体电解质材料,制备过程中分别加入过量的碳酸锂,质量分数分别为(0~30 %).通过XRD、SEM、ICP-OES以及EIS测试,表征不同锂过量LSTH固体电解质材料成相、显微形貌以及室温电导率的影响.实验结果表明,配料时,过量一定质量百分数的碳酸锂,能够有效减少烧结过程中因锂挥发而生成的SrTa₂O₆杂相,提高样品密度和室温电导率.样品最佳锂过量质量百分数为20 %,20 %锂过量样品1 300 ℃烧结10 h为钙钛矿纯相,密度6.5 g/cm3,室温电导率达到3.12×10-4 S/cm.      

Low-field magnetic entropy changes in （Gd1-xYx）3Al2 alloys

The effects of Y substitution on the magnetic properties and magnetocaloric effect of(Gd1-xYx)3Al2(x=0-0.3) alloys were investigated by X-ray diffraction and magnetization measurements.All samples crystallized in single phase with Zr3Al2-type tetragonal structure.The lattice parameters and magnetic transition temperature decreased obviously with increasing Y content.The magnetic entropy change and refrigerant capacity of these alloys were calculated.The adjustable transition temperature and favorable proper...     

Effects of La2O3/Li2O/TiO2- Coating on Electrochemical Performance of LiCoO2 Cathode

Conventional cathode material （LiCoO2） was modified by coating with a thin layer of La2O3/Li2O/TiO2 for improving its performance for lithium ion battery. The morphology and structure of the modified cathode material was characterized by SEM, XRD, and Auger electron spectroscopy. The performance of the cells with the modified cathode material was examined, including the cycling stability, the diffusion coefficient under different voltages, and the C-rate discharge. The results showed that the cell composed of the coated cathode material discharged at a large current density, and possesses a stable cycle performance in the range from 3.0 to 4.4 V. It was explained that the rate of Li ion diffusion increased in the cell while using La2O3/Li2O/TiO2-coated LiCoO2 as the cathode and the coating layer may act as a faster ion conductor （La2O3/Li2O/TiO2）.     

Antigenic drift between the haemagglutinin of the Hong Kong influenza strains A/Aichi/2/68 and A/Victoria/3/75

A DNA copy of the gene coding for the influenza A/Aichi/2/68 haemagglutinin protein was cloned in the plasmid pBR322 and the complete nucleotide sequence determined. Comparison of this primary structure and the deduced amino acid sequence with the haemagglutinin gene and protein of strains belonging to the same (H3) subtype and to different subtypes, of both human (H2) and avian (Hav1) origin, documents further at the molecular level the two independent modes of antigenic variation of the virus--drift and shift.     

Index/Volume 11/1972

Abstract

Samples of Magpie titaniferous iron ore – deposits totalling one billion tons – are already known and have been systematically studied by chemical analysis, X-ray diffraction and electron microprobe. The main constituents of this ore, expressed as oxides, are: FeO 26.6%, Fe₂O₃ 36.4%, TiO₂ 12%. The main minerals are magnetite, ilmenite and a spinel; their composition has been determined with an electron microprobe. Results of magnetic concentration of the ore are presented and interpreted with the help of the electron microprobe data.

Résumé

Des échantillons du minerai de Magpie dont les gisements atteignent 1 milliard de tonnes ont été étudiés de façon systématique par analyse chimique, diffraction des rayons X et microsonde électronique. Les principaux constituants de cette magnétite titanifère, exprimés sous forme d'oxydes sont: FeO 26.6%, Fe₂O₃ 36.4%, TiO₂ 12%. Les principaux minéraux présents sont la magnétite, l'ilménite et un spinelle; leur composition a été déterminée par microsonde électronique. Les résultats des études de concentration magnétique du minerai sont également présentés et interprétés grace aux résultats de l'analyse par microsonde.     

Extraordinary Transport Behaviors of La0.67Sr0.33Mn1-xCrxO3（0.00≤x ≤0.30）

M-T curves, ρ-T curves and MR-T curves of La0.67Sr0.33Mn1-xCrxO3（0.00≤ x ≤0.30） were studied. Experimental results indicate that the substitution of Cr on Mn sites is impotent in driving Tc, but with an increase of Cr content, there appear two peaks in resistivity and MR response, thus the temperature range of CMR response is significantly broadened. The extraordinary transport behavior and the abnormal CMR effect could be the results of coexistence and competition of Mn^3 ＋ -O-Mn^4 ＋ and Mn^3＋ -O-Cr^3 ＋ channels.     

Effect of Metal Oxide Doping into Ce0.5Zr0.5O2 on Catalytic Activity of MnOx/γ-Al2O3/Ce0.45Zro.45M0.1Ox （M = Y, La, Mn） Honeycomb Catalysts

This article showed that the catalytic activity of MnOx/γ-Al2O3/Ce0.5Zr0.5O2 monolithic catalyst toward the catalytic combustion of ethanol in a fixed bed reactor could be greatly improved by doping three metal oxides into Ce0.5Zr0.5O2. The catalytic activity of MnOx/γ-Al2O3/Ce0.45Zr0.45M0.1 Ox （M = Y, La, Mn） is better than that of MnOx/γ-Al2O3/Ce0.5 Zr0.5O2. The order of activity of the catalysts is as follows： MnOx/γ-Al2O3/Ce0.45Zr0.45Y0.1Ox 〉 MnOc/γ-Al2O3/Ce0.45 Zr0.45La0.1Ox 〉 MnOx/γT-Al2O3/Ce0.45Zr0.45Mn0.1Ox 〉 MnOx/y-Al2O3/Ce0.5Zr0.5O2. The influence of the loading amount of manganese oxide in enhancing the catalytic activity of MnOx/γ-Al2O3/Ce0.45Zr0.45Y0.1 Ox was investigated. The results showed that when MnO2 loading amount was 10% （mass fraction）, the MnOx/Al2O3/Ce0.45Zr0.45Y0.1Ox catalyst recorded the highest activity.