Study on Fabrication Process of Anisotropic Injection Bonded Nd-Fe-B Magnets

This study is on the injection molding process for the fabricating anisotropic Nd-Fe-B bonded magnets. The effects of powder loading, particle size of the magnetic powder, polymer binder and the fabricating process on the magnetic and the mechanical properties of anisotropic Nd-Fe-B magnets were investigated. The proper powder loading, particle size and binder are 60%(vol%), 75–106 μm and PA 1010, respectively. The optimum condition for good magnetic properties of anisotropic injection bonded Nd-Fe-B magnets is mixing the binder and the chemicals in the temperature between 205–215 °C, injection temperature of 265 °C, the injection pressure of 5–6 MPa, the press time of 5 second, and molding temperature of 80 °C. The magnetic properties of anisotropic bonded Nd-Fe-B magnets made in above conditions from d-HDDR powder were: B_r=0.72 T, _iH_c=983 kA/m, (BH)_max=75 kJ/m^c.     

Progress of Sm-Fe-N Anisotropic Magnets

A reduction and diffusion method (R/D) is used to make a mother alloy of Sm-Fe-N anisotropic magnets. Reduction of 0.5wt% of samarium content compared to the conventional powder increases magnetization. Milling condition and surface treatment improve the squareness of demagnetization curve, the aging property and the heat resistance. The maximum energy product of 292 kJ/m³ is obtained with the powder. High coercive force is maintainable even if the powder is exposed for 300h in 80 °C 90%RH. The maximum energy product of 141 kJ/m³ is obtained with an injection molded anisotropic magnet. The aging property estimated by irreversible flux loss is comparable to the conventional MQP-B magnets. The heat resistance temperature (T_−5%) at which die initial irreversible flux loss becomes −5% is 125-more than 150 °C for Sm-Fe-N magnets and 150–170 °C for hybrid magnets. The magnetic properties of bonded HDDR Nd-Fe-B magnet were improved by substituting for Nd-Fe-B powder with Sm-Fe-N powder. A new technology to make anisotropic bonded Sm-Fe-N thin cylinder magnets by an injection molding using unsaturated polyester (UP) resin was developed.     

Progress of Research on Bonded Nd-Fe-B Magnets

Some progress of research on bonded Nd-Fe-B magnets in National University of Defense Technology(NUDT) is presented in this paper. The contents include B-rich R₂Fe₁₄B-based nano composite with good performance; a model to determine of the least amount of binder; resin for high temperature application; resin encapsulating magnetic powders for long-term storage; thermoplastic polymer used for mold-pressing magnets; hybrid bonded Nd-Fe-B/Sm₂Co₁₇ magnet with a potentially useful improvements in remanence and magnetic energy product.     

Anisotropic NdFeB/SmCoCuFeZr composite bonded magnet prepared by warm compaction process

Anisotropic NdFeB/SmCoCuFeZr composite bonded magnets were prepared by warm compaction process. The effects of adding SmCoCuFeZr magnetic powder on the properties of anisotropic bonded NdFeB magnet were investigated in this work. The results show that, both magnetic properties and temperature stability of the bonded magnet can be improved by adding fine SmCoCuFeZr magnetic powder. In the present study, the optimal content of SmCoCuFeZr magnetic powder was about 20 wt.%, in this case, the Br, Hcj, and(BH)maxof the NdFeB/SmCoCuFeZr composite magnet achieved 0.943 T, 1250 kA/m, and168 kJ/m~3, respectively.     

Preparation and magnetic properties of anisotropic Nd_2Fe_(14)B/Sm_2Co_(17) hybrid-bonded magnets

In the present work, anisotropic Nd_2 Fe_(14) B/Sm_2 Co_(17) hybrid-bonded magnets were prepared with different Nd-Fe-B contents. It is found that the particle distributions and ratios between the two magnetic phases have important roles in the magnetic properties, microstructures and thermal stability of the magnets. With increase of Nd-Fe-B content, the saturation magnetization of the anisotropic hybrid magnet increases significantly, however, coercivity decreases, and the demagnetization curves show magnetically single-phase behavior. The anisotropic Nd_2 Fe_(14) B/Sm_2 Co_(17) hybrid-bonded magnets exhibit a maximum energy product and remanence of 14.15 MGOe and 99.53 A·m~2/kg, respectively, when the NdFe-B content is 70 wt% at room temperature. Furthermore, the hybrid magnets also have better thermal stability at elevated temperatures due to the interaction between the two magnetic particles.     

Manufacturing of Injection-Molded NdFeB Magnet with (BH)max111 kJ · m-3

The bonded NdFeB magnets prepared by injection molding meet with the development tendency of the magnet in small volume, light weight and high performance ,and have a good prospect.In this paper, a modified nylonbased binder was developed for powder injection molding of NdFeB bonded magnets.The effects of pretreatment of NdFeB anisotropic magnetic powder produced with HDDR processing on the anti-oxidation behaviors of powder and the final magnetic properties of the molded bonded magnets were studied.The optimal powder loading of 65 vol% was achieved with the modified binder.It was found that the properties of the bonded magnets were mainly affected by the powder surface pretreatment and the intensity of the applied alignment magnetic field during injection molding for a certain powder.Bonded magnets with remanence of 0.820 T, intrinsic coercivity of 1140.3 kA· m-1 and maximum energy product of 111 kJ · m-3 were produced with the optimal processing.     

Effects of grain boundary diffusion process on magnetic properties enhancement and microstructure evolution of hot-deformed Nd-Fe-B magnets

Grain boundary diffusion(GBD) process is an important approach for producing Nd-Fe-B magnets with high coercivity and high thermal stability.The GBD for hot-deformed Nd-Fe-B magnets with nanocrystalline micro structure is more complicated compared to sintered magnets.Here,we investigated the effects of different GBD methods,i.e.,intergranular addition(in-situ GBD 1#),in-situ GBD from magnet surface during hot pressing and hot deformation(in-situ GBD 2#),and conventional GBD,on the magnetic prope...     

Improvement of coercivity and thermal stability of Nd-Fe-B sintered magnets by intergranular addition of Tb80Fe20 alloy

To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications, the eutectic Tb₈₀Fe₂₀ (wt%) alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity (H_cj) and thermal stability. The microstructure, magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb₈₀Fe₂₀ contents were studied. The experimental results demonstrate that the coercivity (H_cj) of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe, and the remanence (B_r) decreases not obviously by introducing 4 wt% Tb₈₀Fe₂₀ alloy. Meanwhile, the reversible temperature coefficients of coercivity (β) and remanence (α) of the Nd-Fe-B magnets are increased from ?0.5634%/℃ to ?0.4506%/℃ and ?0.1276%/℃ to ?0.1199%/℃ at 20–170 ℃, respectively. The Curie temperature (T_C) of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb₈₀Fe₂₀ content. Moreover, the irreversible flux magnetic loss (h_irr) is obviously reduced as Tb₈₀Fe₂₀ addition increases. Further analysis of the microstructure reveals that a modified microstructure, i.e. clear and continuous RE-rich grain boundary layer, is acquired in the sintered magnets by introducing Tb₈₀Fe₂₀ alloy. The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.     

Model for Calculating J(H) Curves of Ni Coated Nd-Fe-B Magnets

An analytical model to describe the influence of surface degradation and the Ni layer itself on the magnetic properties of Ni coated Nd-Fe-B magnets is presented. Starting from the bulk magnetic properties, the dimensions, the thickness of Ni coating and the affected surface layer, J(H) demagnetization curve is calculated. Subsequently the expected values of (BH)_max, and the reversible permeability are deduced from the calculated J(H) curves. For flat magnets the surface effects lead to a decrease of B_r and an increase of the permeability which lowers (BH)_max. For strait magnets a step in the J(H) curve appears at H = 0. The deteriorating effect of Ni coating and the surface layer scale with the dimensions of magnet and the thickness of these layers, which depend on the processing and the grain size of magnet. These effects can not be neglected if one or more dimensions of a Ni coated magnet are less than about 5 mm. SmCo₅ magnets show similar effects but the coercivity of the damaged surface layer is higher. Pinning type Sm₂Co₁₇ magnets show almost no deterioration on surface due to machining. As a result, Sm-Co magnets are better suited for applications with dimensions smaller than about 2 mm.     

Preparation and characterization of sodium silicate/epoxy resin composite bonded Nd-Fe-B magnets with high performance

As an organic binder for bonded Nd-Fe-B magnets, epoxy resin(EP) has poor heat resistance but good moisture resistance, while sodium silicate(SS) has poor moisture absorption but better heat resistance and corrosion resistance. In order to improve high temperature stability and decrease moisture absorption of bonded Nd-Fe-B magnets, EP/SS composites were applied as the binder to prepare bonded Nd-Fe-B magnets. The magnetic properties, moisture absorption, corrosion resistance, compressive strength and microstructure of composite bonded magnets were investigated. The results show that EP/SS bonded magnets can obtain excellent magnetic properties at room temperature, and even useable magnetic properties a thigh temperature environments at 200°C. EP/SS composite binder effectively improves heat resistance and corrosion resistance of bonded Nd-Fe-B magnets, and reduces the hygroscopic properties. The molecule of sodium silicateis rigid and keeps it original shape at high temperature environments. In addition, SS in composite binder improves the mobility of the magnetic powders during the pre-pressing process, which makes the magnetic powders attain a more regular structure. These two factors will increase the mechanical properties. Moreover, sodium silicate in the composite binder can also cover the surfaces protecting the magnetic powders from oxidation and corrosion. EP in composite binder can cover SS surface to reduce the water absorption of SS as epoxy is a hydrophobic material. The EDX analysis shows that the composite binder has accumulated in the gaps of the magnet powders, which not only improves heat resistance and corrosion resistance, but also increases the mechanical properties. Therefore, EP/SS composite binder endows bonded Nd-Fe-B magnets excellent comprehensive properties.     

注射成形粘结钕铁硼/铁氧体复合磁体的研究

对注射成形粘结Nd-Fe-B/铁氧体复合磁体进行了深入的研究。实验结果表明：随着铁氧体磁粉的加入，复合磁体的磁性能虽略有降低，但其力学性能及热稳定性均有大幅度改善，特别是在铁氧体含量为87%（质量分数时），复合磁体内禀矫顽力温度系数为零，不同磁粉间静磁场的存在，使得复合磁体在铁氧体含量低于70%（质量分数）时，其磁性能大于平均值，而大于70%（质量分数）时则小于平均值。     

Effect of yttrium substitution on magnetic properties and service performances of Nd-Fe-B sintered magnets

We successfully fabricated partial Y substituted NdY-Fe-B magnets with nominal compositions of(Nd_1-xY_x)_13.80Fe_ba1Al_0.24Cu_0.1B_6.04(at%,x=0,0.1,0.2,0.3,0.4) by powder metallurgy process and the magnetic properties as well as service performances of the magnets were also systematically investigated.The phase constituents of the magnets have no obvious variation within the whole range of Y content,while the main phase grain...     

Structure and magnetic properties of bulk nanocrystalline Nd-Fe-B permanent magnets prepared by hot pressing and hot deformation

Structure and magnetic properties were studied for bulk nanocrystalline Nd-Fe-B permanent magnets that were prepared at 650 °C for 3 min under 300 MPa using the SPS-3.20-MK-V sintering machine and the hot pressed magnets were then submitted to hot deformation with height reduction of 50%,60%,70%,80%,and 85%.Effects of height reduction(HR) and deformation temperature on the structure and magnetic properties of the magnets were investigated.The crystal structure was evaluated by means of X-ray diffraction(XRD) and the microstructure was observed by transmission electron microscopy(TEM).The magnetic properties of the magnets were investigated by vibrating sample magnetometer(VSM).As the height reduction increased,the remanence(B r) of the magnets increased first,peaks at 1.3 T with HR=60%,then decreased again,and the coercivity(H ci) of the magnets decreased monotonically.On the other hand,as the deformation temperature increased,the B r of the magnets increased first,peaks at 1.36 T with HR=60%,then decreased again,and the H ci of the magnets decreased monotonically.Under optimal conditions,the hot deformed magnet possessed excellent magnetic properties as B r =1.36 T,H ci =1143 kA/m,and(BH) max =370 kJ/m 3,suggesting the good potential of the magnets in practical applications.     

Multilayer Magnets

After experimental evidence of intergrain exchange coupling was reported, nanocomposite magnets with high remanence and large energy products were predicted. However, the experimental values of the maximum magnetic energy product of nanocomposite bulk magnets have been much less than the theoretically predicted ones. We gave a brief review on advances in multilayer magnets. The exchange coupling and remanence enhancement were realized in nanocomposite (Nd,Dy)(Fe,Co,Nb,B)_5,5/α-Fe thin films prepared by sputtering and heat treatments. Well-designed multilayer films consist of magnetically hard Nd₂Fe₁₄B-type phase with the grain size of 40 nm and magnetically soft α-Fe phase existing in the form of the continuous layers. Furthermore, we reported the structural and magnetic properties of anisotropic Nd-Fe-B thin films. The effects of thickness, deposition rates, substrate temperature, annealing temperature were studied. A high maximum energy product of (BH)_max = 270 kJ/m³ was obtained for anisotropic Nd-Fe-B thin films.     

Magnetic Alignment Study of Hybrid Magnet Consisting of R-Rich and R-Lean Nd-Fe-B Alloys

A hybrid magnet was prepared by the hot-pressing and die-upsetting of the mixture of the R-rich Nd_xFe_93.5–xGa_0.5B₆ (x= 13.5 and 11.8) alloy and the R-lean Nd_xFe_93–xNb₁B₆ (x = 6, 9) alloy melt-spun ribbons. The microstructure and magnetic properties of the hybrid magnet were investigated. In the hot-pressed or die-upset hybrid magnet the R-rich and R-lean alloy regions existed independently without alloying between them. The two alloy regions in the die-upset hybrid magnet were coupled effectively via a magnetostatic interaction. A texture was developed only in the R-rich Nd₂Fe₁₄B single phase alloy region in the die-upset hybrid magnet, and this led to an anisotropic nature in die-upset hybrid magnet. The die-upset hybrid magnets containing higher Nd-content (13.5 at%) host alloy shows consistently a better magnetic alignment with respect to the magnets with lower Nd-content (11.8 at%) host alloy.     

Magnetic Domain Structure: Analysis of Magnetic Reversal in RE-3d Permanent Magnets

The possibilities of direct magnetic domain observation on surfaces of modern permanent magnets SmCo₅, Sm-Zr-Co-Cu-Fe, Nd-Fe-B by means of the magneto-optical Kerr effect for the quantitative and qualitative testing of magnetization and magnetic reversal processes and nature of magnetic hysteresis were analyzed. For all types of investigated magnets, the angular dependences for saturation field H_S, critical field of reverse domain removal H_K, and nucleation field H_n of individual grains were found to obey the law 1/cosϕ, where ϕ is the angle between the grain easy axis and external magnetic field.     

Magnetic properties and magnetization mechanism of anisotropic NdFeB/SmFeN hybrid bonded magnets prepared with different coercivity NdFeB powders

Anisotropic NdFeB/SmFeN hybrid bonded magnets were prepared by warm compaction process under an orientation magnetic field of 22 kOe,mixing with anisotropic SmFeN powders in different addition and HDDR-NdFeB powders in different coercivity.With the addition of 20 wt% SmFeN,the density and remanence of hybrid magnets increase from 5.58 g/cm³,8.4 kGs to 6.02 g/cm³,9.0 kGs,respectively.And as the addition amount of SmFeN powders varies from 20 wt% to 40 wt%,the maximum energy ...     

Nd-Fe-B永磁材料的粉末注射成形技术

介绍了目前采用的几种粉末注射成形用Nd-Fe-B磁粉的制备方法及特点;讨论了粘结剂、改性剂及磁场取向对注射成形Nd-Fe-B粘结剂磁体和烧结磁体最终磁性能的影响;指出了注射成形Nd-Fe-B磁体的现在以及潜在的应用市场。在此基础上,指出了今后开展研究工作的方向。     

Fabrication and Maglev Properties of Large Bulk Melt－Texture－Growth YBCO Superconductor

ＦａｂｒｉｃａｔｉｏｎａｎｄＭａｇｌｅｖＰｒｏｐｅｒｔｉｅｓｏｆＬａｒｇｅＢｕｌｋＭｅｌｔ－Ｔｅｘｔｕｒｅ－ＧｒｏｗｔｈＹＢＣＯＳｕｐｅｒｃｏｎｄｕｃｔｏｒＲｅｎＨｏｎｇｔａｏ（任洪涛）；ＸｉａｏＬｉｎｇ（肖玲）；ＪｉａｏＹｕｌｅｉ（焦玉磊）；Ｗａｎ...     

Microstructure and Magnetic Properties of Anisotropic Nd-Fe-B Magnets Fabricated by Single-Stage Hot Deformation

Anisotropic Nd-Fe-B magnets were fabricated by the single stage hot deformation (SSHD) method. The magnetic properties of the anisotropic Nd-Fe-B magnets are as follows: the maximum energy product is 234.7 kJ·m-3, remanence 1.16 T and coercivity 684.3 kA·m-1. A study of the relationship between microstructure and magnetic properties for the anisotropic Nd-Fe-B magnets was carried out. The results show that the grains of Nd2Fe14B have grown up preferentially along the direction perpendicular to the pressing direction.