Poly(acrylic acid) modifying bentonite with in-situ polymerization for removing lead ions

In this paper, a new kind of poly(acrylic acid) modified clay adsorbent, the poly(acrylic acid)/bentonite composite (PAA/HB) was prepared by in-situ polymerization, and utilized to remove lead(II) ions from solutions. The maximum adsorption of adsorbent is at pH 5 for metal ions, whereas the adsorption starts at pH 2. The effects of contact time (5-60 min), initial concentration of metal ions (200-1,000 mg/L) and adsorbent dosage (0.04-0.12 g/100 mL) have been reported in this article. The experimental data were investigated by means of kinetic and equilibrium adsorption isotherms. The kinetic data were analyzed by the pseudo-first-order and pseudo-second-order equation. The experimental data fitted the pseudo-second-order kinetic model very well. Langmuir and Freundlich isotherms were tried for the system to better understand the adsorption isotherm process. The maximal adsorption capacity of the lead(II) ions on the PAA/HB, as calculated from the Langmuir model, was 769.2 mg/g. The results in this study indicated that PAA/HB was an attractive candidate for removing lead(II) (99%).     

Characterization of cobalt ferrite-supported activated carbon for removal of chromium and lead ions from tannery wastewater via adsorption equilibrium

In this experiment, cobalt ferrite-supported activated carbon (CF-AC) was developed and characterized via the wet impregnation method for the removal of Cr and Pb(II) ions from tannery wastewater. Batch adsorption was carried out to evaluate the effect of experimental operating conditions (pH of solution, contact time, adsorbent dose, and temperature), and the removal efficiencies of Cr and Pb(II) ions by the developed adsorbents were calculated and recorded for all experimental conditions. These variables were estimated and reported as removal efficiencies of 98.2% for Cr and 96.4% for Pb(II) ions at the optimal conditions of 5, 0.8 g, 80 min, and 333 K for pH, adsorbent dose, contact time, and temperature, respectively. The equilibrium for the sorption of Cr and Pb(II) ions was studied using four widely used isotherm models (the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherm models). It was found that the Freundlich isotherm model fit better with the coefficient of determination (R²) of 0.948 4 and a small sum of square error of 0.000 6. The maximum adsorption capacities (Q_m) of Pb(II) and Cr adsorbed onto CF-AC were determined to be 6.27 and 23.6 mg/g, respectively. The adsorption process conformed well to pseudo-second order kinetics as revealed by the high R² values obtained for both metals. The thermodynamic parameters showed that adsorption of Cr and Pb(II) ions onto CF-AC was spontaneous, feasible, and endothermic under the studied conditions. The mean adsorption energy (E) values revealed that the adsorption mechanism of Cr and Pb(II) by CF-AC is physical in nature. The results of the study showed that adsorbent developed from CF-AC can be efficiently used as an environmentally friendly alternative adsorbent, for removal of Cr and Pb(II) ions in tannery wastewater.     

The sorption of lead, cadmium, copper and zinc ions from aqueous solutions on a raw diatomite from Algeria

The adsorption of Cu(2+), Zn(2+), Cd(2+) and Pb(2+) ions from aqueous solution by Algerian raw diatomite was studied. The influences of different sorption parameters such as contact pH solution, contact time and initial metal ions concentration were studied to optimize the reaction conditions. The metals ions adsorption was strictly pH dependent. The maximum adsorption capacities towards Cu(2+), Zn(2+), Cd(2+) and Pb(2+) were 0.319, 0.311, 0.18 and 0.096 mmol g(-1), respectively. The kinetic data were modelled using the pseudo-first-order and pseudo-second-order kinetic equations. Among the kinetic models studied, the pseudo-second-order equation was the best applicable model to describe the sorption process. Equilibrium isotherm data were analysed using the Langmuir and the Freundlich isotherms; the results showed that the adsorption equilibrium was well described by both model isotherms. The negative value of free energy change ΔG indicates feasible and spontaneous adsorption of four metal ions on raw diatomite. According to these results, the high exchange capacities of different metal ions at high and low concentration levels, and given the low cost of the investigated adsorbent in this work, Algerian diatomite was considered to be an excellent adsorbent.     

Removal of lead(II) and copper(II) from aqueous solution using foitite from Linshou mine in Hebei, China

Foitite from Linshou mine in China's Hebei province was investigated as an adsorbent to remove Pb(II) and Cu(II) from aqueous solution. The results showed that foitite can readily remove heavy metal ions from aqueous solution. The data shows that the metal uptake for Pb(II) increases rapidly, accounting for 74.47% when contact time was 2 min. In contrast to Pb(ll), there was a worse capability for adsorption of Cu(II). In the first 4 min, the metal uptake accounted for 34.7%. According to the analytical results obtained from X-ray diffraction, laser Raman spectrum, X-ray energy dispersive spectrometer, and Zeta potential, the removal mechanism of Pb(II) and Cu(II) by using foitite can be explained as following: firstly, the existence of an electrostatic field around foitite particles can attract heavy metal ions and consequently combine heavy metal ions with OH; secondly, heavy metal ions in the solution are exchanged with the Fe3+ and Al3+ in the foitite.     

Adsorption of Cr(VI) in wastewater using magnetic multi-wall carbon nanotubes

Magnetic multi-wall carbon nanotubes were prepared with wet chemical treatments and characterized by a transmission electron microscope (TEM) and X-ray diffraction (XRD). They were used as adsorbents for the removal of Cr(VI) in aqueous solutions. The effects of adsorbent dosage, the concentration of Cr(VI) in aqueous solution, temperature, and pH value on the removal efficiency were studied. Results showed that the adsorption capacity of the magnetic multi-wall carbon nanotubes increased with the initial Cr(VI) concentration, but decreased with the increase of adsorbent dosage. The adsorption amount increased with contact time. The adsorption kinetics were best represented by the pseudo second-order kinetic model, and the adsorption isotherms indicated that the Langmuir model better reflected the adsorption process. The obtained calculation results for the Gibbs free energy revealed that the adsorption was a spontaneous and endothermic process. The enthalpy deviation was 3.835 kJ·mol⁻¹. The magnetic multi-wall carbon nanotubes showed significant potential for application in adsorption of heavy metal ions.     

Removal of toxic heavy metals by iron-coated starfish.

In this study, the applicability of calcined starfish (SF) and iron-coated SF (ICSF) as potential adsorbents for the treatment of wastewater containing heavy metal ions was evaluated. ICSF was prepared by mixing FeCl(3) solution previously adjusted to pH 7 approximately 9 with SF at 105 degrees C. From the dissolution test at pH 2, ICSF showed strong acid-proof properties. In the batch adsorption, Cu(II) adsorption onto ICSF was completed within 150 minutes, while 47% Cu(II) was removed with SF alone. This result clearly suggests that the coated Fe(III) serves additional adsorption sites, resulting in the enhanced removal of heavy metal ions. The removed fraction of both Cu(II) and Pb(II) increased with increasing solution pH and nearly complete removals of Pb(II) and Cu(II) were observed at around pH 6 and 8, respectively. From the adsorption isotherm of Cu(II) onto SF and ICSF at pH 3.0, the removed amount of Cu(II) by ICSF was greater than that by SF over the entire concentration range studied. In the column test, the breakthrough of Cu(II) in the ICSF column was greatly retarded compared to that in the SF column. Based on the drinking water regulations for Cu(II), SF and ICSF were able to remove 3400 and 8600 mg/kg of Cu(II) from the wastewater, respectively.     

Removal of Cu(II) ions from aqueous solutions using N-carboxymethyl chitosan

N-carboxymethyl chitosan (NCMC) was synthesized by reacting chitosan with chloroacetic acid in water under triethylamine (Et(3)N) as catalyst. The chemical structures of NCMC were characterized by Fourier transform infrared (FT-IR) and hydrogen-1 nuclear magnetic resonance ((1)H-NMR) spectroscopy and confirmed that carboxymethylation occurred on the amino groups. Samples of NCMC were used for removal of Cu(II) from aqueous solution. The effects of degree of substitution of NCMC, initial pH value and adsorption kinetics on the adsorption were studied. Adsorption experiments showed that NCMC has a high adsorption speed and high adsorption capacity for remove Cu(II) from aqueous solution. The adsorption kinetics data were best fitted with the pseudo-second-order model. The experimental equilibrium data of Cu(II) on the NCMC were both fitted to the Langmuir model and Freundlich model, which revealed that the maximum capacity for monolayer saturation was 147.93 mg/g.     

Equilibrium, kinetic and thermodynamic studies of mercury adsorption on almond shell

The application of almond shell as a low cost natural adsorbent to remove Hg(2+) from aqueous solution was investigated. Batch experiments were carried out to evaluate the adsorption capacity of the material. The chemical and physical parameters such as pH, sorbent amount, initial ion concentration, and contact time were optimized for the maximum uptake of mercury onto the solid surface. Adsorption isotherms were expressed by Langmuir and Freundlich adsorption models, and the experimental data were found to fit the Langmuir model rather than the Freundlich. The maximum adsorption capacity obtained from the Langmuir isotherm was 135.13 mg/g. A kinetic study was carried out with pseudo-first-order and pseudo-second-order reaction equations and it was found that the Hg(2+) uptake process followed the pseudo-second-order rate expression. The thermodynamic values, ΔG(0), ΔH(0) and ΔS(0), indicated that adsorption was an endothermic and spontaneous process. The potential of this material for mercury elimination was demonstrated by efficient Hg(2+) removal from a synthetic effluent.     

Adsorption of Cd(II), Zn(II) by extracellular polymeric substances extracted from waste activated sludge

Adsorption of Cd(II) and Zn(II) ions in single solutions using extracellular polymeric substances (EPS) from activated sludge was investigated. Langmuir and Freundlich models were applied to describe metal adsorption. The results showed that EPS was an effective adsorbent for the zinc and cadmium ions from aqueous solution. The equilibrium metal uptake was increased with increasing the initial concentration of metal ion. Constants calculated from isotherms model showed that the maximum uptake capacity of cadmium was estimated to be 45 mg/g of Cd(II) and 80 mg/g of Zn(II). Both Langmuir and Freundlich isotherms were suitable for describing adsorption of Cd(II) by EPS, while the Langmuir isotherm equation fit the date of Zn(II) adsorption better, indicating that EPS adsorb Cd(II) and Zn(II) by different mechanisms.Analysis of FTIR spectra demonstrated that C-O-C of polysaccharides at 1,150-1,030 cm(-1), group of the amide(I), CH(2) group of the lipids, carboxyl and -OH groups of proteins and polysaccharides were involved in cadmium and zinc binding, of which the -OH groups and the C-O-C group of polysaccharides.     

Camellia oleifera Abel shells as a new biosorbent to remove methylene blue from aqueous solutions

This study aimed at investigating the feasibility of using Camellia oleifera Abel shell (COAS), an agriculture product in middle-west region in China, for the adsorption of methylene blue (MB), a cationic dye. Batch adsorption experiments were carried out to evaluate the effects of contact time, pH, adsorbent dosage, temperature and initial concentration on the adsorption of MB. Adsorption equilibrium studies showed that MB adsorption followed Langmuir model with a maximum adsorption capacity of 454.54 mg/g. The results demonstrated that the COAS is a promising adsorbent in the removal of MB from aqueous solutions.     

Modification of granular activated carbon using low molecular weight polymer for enhanced removal of Cu(2+) from aqueous solution.

Palm shell activated carbon was modified via surface impregnation with polyethyleneimine (PEI) to enhance removal of Cu(2+) from aqueous solution in this study. The effect of PEI modification on batch adsorption of Cu(2+) as well as the equilibrium behavior of adsorption of metal ions on activated carbon were investigated. PEI modification clearly increased the Cu(2+) adsorption capacities by 68% and 75.86% for initial solution pH of 3 and 5 respectively. The adsorption data of Cu(2+) on both virgin and PEI-modified AC for both initial solution pH of 3 and 5 fitted the Langmuir and Redlich-Peterson isotherms considerably better than the Freundlich isotherm.     

Use of sesame stalk biomass for the removal of Ni(II) and Zn(II) from aqueous solutions

In this study an agricultural residue, sesame stalk, was evaluated for the removal of Ni(II) and Zn(II) metal ions from aqueous solutions. Biosorption studies were carried out at different pH, biosorbent dosage, initial metal ion concentrations, contact time, and solution temperature to determine the optimum conditions. The experimental data were modeled by Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin isotherm models. Langmuir model resulted in the best fit of the biosorption data. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetic data and to evaluate rate constants. The best correlation was provided by the second-order kinetic model. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated for predicting the nature of adsorption. The experimental results showed that sesame stalk can be used as an effective and low-cost biosorbent precursor for the removal of heavy metal ions from aqueous solutions.     

Removal of hexavalent chromium in aquatic solutions by pomelo peel

This study investigated the removal of hexavalent chromium(Cr(VI)) in aqueous solutions using pomelo peel(PP) and FeCl_3-modified pomelo peel(FPP) as novel biomass adsorbents.Batch adsorption experiments were performed to evaluate the effects of pH,time,temperature,initial concentration,and adsorbent dose on Cr(VI) removal by PP and FPP.The results show that the maximum adsorption capacity of Cr(VI)was 21.55 mg/g for FPP and 0.57 mg/g for PP at a pH of 2.0 and a temperature of 40℃.The surface shape,microstructure,and chemical composition of FPP were analyzed with scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),and energy dispersive spectroscopy(EDS),and compared with those of PP.The results show that the adsorption performance of FPP was much better than that of PP,indicating that FPP can be an alternative high-efficiency adsorbent for Cr(VI) removal.     

甘蔗渣对中性红的吸附性能的实验研究

对甘蔗渣进行了吸附去除印染废水中的中性红模拟实验研究。考察了甘蔗粉用量、pH、吸附时间、中性红初始浓度和温度等因素对吸附效果的影响,探究了其吸附动力学及吸附规律。结果表明,甘蔗粉用量、pH、吸附时间和中性红初始浓度、温度等因素对甘蔗粉吸附水中中性红有显著影响。适宜的吸附条件为:甘蔗粉用量0.6g/100mL,pH6.0～7.0,吸附时间60min,初始浓度100mg/L,温度30℃。在该条件下,中性红的去除率达91%以上。甘蔗粉对中性红的吸附过程可以用Langmuir、Temkin等温吸附方程和二级吸附速率方程进行很好的描述,主要表现为物理吸附。     

Adsorption kinetics, isotherms and thermodynamics of atrazine removal using a banana peel based sorbent

Atrazine removal from water by treated banana peels was studied. The effect of pH, contact time, initial atrazine concentration, and temperature were investigated. Batch experiments demonstrated that 15 g L(-1) adsorbent dosage removed 90-99% of atrazine from 1-150 ppm aqueous solutions. The removal was both pH and temperature dependent with the most atrazine removed between pH 7 and 8.2 and increased with increasing temperature. Equilibrium data fitted well to the Langmuir and Redlich-Peterson models in the concentration and temperature ranges investigated, with a maximum adsorption capacity of 14 mg g(-1). Simple mass transfer models were applied to the experimental data to examine the adsorption mechanism and it was found that both external mass transfer and intraparticle diffusion played important roles in the adsorption mechanisms. The enthalpy of atrazine adsorption was evaluated to be 67.8 ± 6.3 kJ mol(-l) with a Gibbs free energy of -5.7 ± 1.2 kJ mol(-1).     

Comparison of surface functional groups and metal uptake efficiency of rice husk harvested from different climatic zones

Rice husk (RH) is a very effective natural adsorbent for fast removal of heavy metal cations from water solutions. Application of RH for removal of some heavy metal ions, such as Ni, Zn, Mn, Co, Cu, Pb and Cd from water solutions has been studied and different maximum adsorption capacities and a variety of optimized conditions were reported in the literature. In this work, the efficiency of RH harvested from different climatic regions was studied. For this proposal, different RH samples were collected from three different climatic regions of Iran (nominated as RH1 to RH3); their removal efficiencies of heavy metal cations of Ni(2+), Cu(2+) and Cd(2+) were investigated and compared. The adsorption data at optimum conditions could be assessed well by both Langmuir and Freundlich models. Statistical analysis of the results of adsorption isotherms showed that different RH samples have different efficiencies in uptake of these heavy metal ions. The RH samples were characterized using Fourier transform infrared spectroscopy and Boehm titration, which indicated that amounts of functional groups differed between RHs that are grown in different climatic conditions.     

氨基功能化CaCO3粉末材料吸附重金属离子的研究

用直接沉淀法和包覆法相结合,制得氨基功能化CaCO3粉末材料,并对其作为某些重金属离子(Pb2+、Cu2+和Mn2+)的有效吸附剂进行表征及测定。X射线衍射(XRD)、能谱分析和扫描电子显微镜(SEM)证明该材料含有CaCO3,通过红外测定可知,功能性基团(-NH2)已成功包覆于CaCO3粉末材料上。氨基对重金属离子的吸附起主要作用,考察了吸附时间、重金属离子的初始浓度和溶液的pH值对吸附的影响。     

Pollutant removal efficiency of alternative filtration media in stormwater treatment.

Sorption experiments were used to assess the ability of various materials (sand, compost, packing wood, ash, zeolite, recycled glass and Enviro-media) to remove heavy metal contaminants typically found in stormwater. Compost was found to have the best physicochemical properties for sorption of metal ions (Cu, Zn and Pb) compared with sand, packing wood, ash, zeolite and Enviro-media. The compost sorption of these metal ions conformed to the linear form of the Langmuir adsorption equation with the Langmuir constants (q,) for Zn(ll) being 11.2 mg/g at pH 5. However, compost was also found to leach a high concentration of dissolved organic carbon (DOC, 4.31 mg/g), compared with the other tested materials. Various combinations of sand, compost and other materials were observed to have excellent heavy metal removal (75-96% of Zn and 90-93% of Cu), with minimal DOC leaching (0.0013-2.43 mg/g). The sorption efficiency of the different Enviro-media mixes showed that a combination of traditional (sand) and alternative materials can be used as an effective medium for the treatment of dissolved metal contaminants commonly found in stormwater. The application of using recycled organic materials and other waste materials (such as recycled glass) also provides added value to the products life cycle.     

Enhancement of removal efficiency of heavy metal ions by polyaniline deposition on electrospun polyacrylonitrile membranes

This paper describes the preparation of a membrane of polyacrylonitrile(PAN) and its corresponding membrane coated with polyaniline(PANI) for the adsorption of heavy metal ions.Scanning electron microscopy micrographs revealed that all the membranes exhibited nanofibrous morphology.The prepared membranes were characterized by Fourier transform infrared spectroscopy(FTIR).The prepared membranes were used as an adsorbent for hazardous heavy metal ions Pb~(2+) and Cr_2 O_7~(2-).The adsorption capacity and the removal efficiency of the membranes were examined as function of the initial adsorbate concentration and pH of the medium.Coated membranes with PANI showed better adsorption performance and their direct current(DC) conductivities were correlated to heavy metal ion concentrations.Adsorption isotherms were also performed,and the adsorption process was tested according to the Langmuir and Freundlich models.The regeneration and reuse of the prepared membranes to re-adsorb heavy metal ions were also investigated.The enhancement in adsorption performance and reusability of PANI-coated membranes in comparison with non-coated ones is fully discussed.The results show that the maximum adsorption capacities of lead and chromate ions on the PANI-coated membranes are 290.12 and 1 202.53 mg/g,respectively.     

Comparative MCDM Analysis for AMD Treatment Method Selection

Robule Lake, located in Eastern Serbia, near the city of Bor, is being influenced by waste materials from mining activities. For the purification of water from Robule Lake, contaminated with various metal ions (Fe, Cu, Zn, Mn, Cd, Ni, etc.), acid mine drainage (AMD) treatment methods such as: passive treatment method, sequential neutralization, ion exchange, adsorption process based on low cost adsorbents, adsorption process based on natural zeolits, electrodialysis, filtration with nanofiltration membranes, and reverse osmosis, were evaluated by the following MCDM methods: TOPSIS, VIKOR, MOOSRA, WASPAS, and CoCoSo. Criteria used for the evaluation were: efficiency in the metal ions removal and the quality of the purified water, necessity of pre-treatment and / or post-treatment of treated water, possibility of using the generated waste, capital costs, operating and maintenance costs, needed area, and sensitivity of the method. The results of the MCDM analysis showed that sequential neutralization was the most appropriate method for this wastewater, while passive treatment system and ion exchange were ranked as second and third, respectively.

After the selection of AMD treatment method, neutralization tests with lime were carried out with the water sample from Robule Lake. The results of sequential neutralization testing showed that concentration of Fe ions could be lowered to 1 mg/L at pH 4. The values of Cu, Zn, and Ni ions concentration obtained at pH 7 were 0.04, 0.65, and 0.21 mg/L, respectively, while the values of Mn and Cd ions concentration of 0.01 and 0.0001 mg/L, were obtained at pH 10.