乙烯酮(双乙烯酮)下游产品废水的治理技术

乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。     

A study of miscibility of blends of polybutadienes of varying microstructure

The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure.     

几种乙炔加压设备性能的比较

阐述并比较了几种加压设备在乙炔加压清净过程中的性能和特点。     

粉煤灰中烧失量检测的不确定度分析

以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。     

生物油的成分分析及物性测定

以添加FeCl2的ZnCl2-KCl混合熔盐裂解纤维素和秸秆,制得生物油。采用傅立叶变换红外光谱法和气相色谱-质谱法分析生物油的成分。结果表明,生物油中成分复杂,含有氧元素、多种有机化合物,主要包括酮类、醛类、酚类及羧酸类等。测定了20～80℃生物油的密度和粘度,发现生物油的密度与温度呈较好线性关系,而生物油的粘度均大于水的粘度,且不同熔盐体系对秸秆生物油的粘度无较大影响。     

分解炉扩径的技术改造

我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉     

Process of acceleration of filtration of viscose

Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969.     

Effect of degree of deacetylation of chitosan on the kinetics of ultrasonic degradation of chitosan

The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003     

水泥水化热测定方法综述

水泥水化热是中、低热水泥和核电工程用水泥的一项关键的技术指标。全球范围内测定水泥水化热的方法有溶解法、直接法/半绝热法、等温传导量热法三种。本文总结了中、美、欧相关方法标准,对其测试原理、仪器设备、试验过程等方面进行了比对,并对其在领域的应用做了简单的概括。     

Approximation of temperature dependence of the modulus of elasticity of glass

A refined nonlinear value of the main parameter of a material, i.e., the elongation modulus versus the instant temperature value, was suggested for introduction into the computational algorithm of tempering stresses.     

基于组件技术的化工原理实验课件的设计

利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。     

Interpretation of DSC measurements of the degree of fusion of rigid PVC

Differential scanning calorimetric (DSC) measurements can be used to infer the degree of fusion of rigid PVC articles. The preferred method involves annealing of the specimen at 260°C for 5 minutes, to erase all crystalline structures, followed by a 2 day storage at room temperature. New crystalline entities that are formed give use to an endotherm in the DSC heating mode. The magnitude of this endotherm divided by the total endotherm observed to 220°C can be used to estimate the degree of fusion of the specimen. Data from various processes and different cross-sections of extruded pipe are consistent with solvent resistance estimations.     

塔设备改造选型的分析

就当前扩产增容中塔设备设计和改造时板式塔和填料塔的选型问题加以分析。在评述目前国内常用的几种塔板和新型填料之后，着重介绍一种新型塔板（导向梯形浮阀塔板）和一种新型填料（波环填料——乾隆帕克）。     

Determination of the extent of oxidation of fats

Summary The amount of secondary oxidation products in refined and unrefined fats has been determined by reaction with benzidine acetate in iso-octane absolute alcohol solution, and measurement of the absorption at 350 mμ of the yellow color has been made. An “aldehyde value” has been calculated from this absorption intensity, using cinnamaldehyde as a reference substance. Determination of the aldehyde value and peroxide number of oils before and during refining has given information on the effect of the different refining processes on the state of oxidation of the oils. The effect of hardening on the content of oxidation products of an oil has been investigated. The effect of the amount of oxidation products in the unrefined material on the flavor stability of the refined material and of the margarine made from it has also been studied.     

中国化工勘察设计协会第三届理事会工作报告

中国化工勘察设计协会于1985年11月成立，至今已经历了三届。第三届理事会已期满，现召开中国化工勘察设计协会第四届会员代表大会，进行换届改选。我代表第三届理事会向大会做工作报告，请各位代表审议。     

我国聚碳酸酯工业发展概况

介绍我国聚碳酸酯生产能力和消费需求,对聚碳酸酯在信息工业中的应用作了简短介绍