Alginic acid-imidazole composite material as anhydrous proton conducting membrane

Recently, membranes with high anhydrous proton conducting have been attracted remarkable interest for the application to the polymer electrolyte membrane fuel cell (PEFC). In this paper, we have investigated the anhydrous proton conductor consisting of alginic acid (AA), one of the acidic biopolymers, and imidazole (Im). This AA-Im composite material showed the proton conductivity of 2×10⁻³ S cm⁻¹ at 130 °C under anhydrous conditions. Additionally, these AA-Im composite materials have the highly mechanical property and thermal stability. Furthermore, the biological products, such as biopolymer, are cheap, non-hazardous, and environmentally benign. The proton conductive biopolymer composite material may have the potential for its superior ion conducting properties, in particular, under anhydrous (water-free) or extremely low humidity conditions.     

Phosphonic acid functionalized siloxane crosslinked with 3‐glycidoxyproyltrimethoxysilane grafted polybenzimidazole high temperature proton exchange membranes

Phosphonic acid functionalized siloxane crosslinked with 3‐glycidoxypropyltrimethoxysilane (GPTMS) grafted polybenzimidazole (PBI) membranes are prepared by sol–gel process. The structure of the membranes is characterized by Fourier‐transform infrared spectroscopy and X‐ray diffraction spectroscopy. SEM images of the membranes show that the membranes are homogeneous and compact. The crosslinked membranes exhibit excellent thermal stability, chemical stability and mechanical property. The proton conductivity of the crosslinked membranes increases by an order of magnitude over range of 20 °C to 160 °C under anhydrous condition, which can reach 3.15 × 10^?2 S cm^?1 at 160 °C under anhydrous condition. The activation energy of proton conductivity for membranes decreases with increase of PBI, because the formation of hydrogen bond network between the phosphonic acid and the imidazole ring can enhance the continuity of hydrogen bond in the membrane. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44818.     

Anhydrous proton conducting polymer electrolytes based on poly(vinylphosphonic acid)-heterocycle composite material

The development of anhydrous proton conducting membrane is important for the operation of polymer electrolyte membrane fuel cell (PEMFC) at intermediate temperature (100-200 °C). In this study, we have investigated the acid-base hybrid materials by mixing of strong phosphonic acid polymer of poly(vinylphosphonic acid) (PVPA) with the high proton-exchange capacity and organic base of heterocycle, such as imidazole (Im), pyrazole (Py), or 1-methylimidazole (MeIm). As a result, PVPA-heterocycle composite material showed the high proton conductivity of approximately 10⁻³ S cm⁻¹ at 150 °C under anhydrous condition. In particular, PVPA-89 mol% Im composite material showed the highest proton conductivity of 7×10⁻³ S cm⁻¹ at 150 °C under anhydrous condition. Additionally, the fuel cell test of PVPA-89 mol% Im composite material using a dry H₂/O₂ showed the power density of approximately 10 mW cm⁻² at 80 °C under anhydrous conditions. These acid-base anhydrous proton conducting materials without the existence of water molecules might be possibly used for a polymer electrolyte membrane at intermediate temperature operations under anhydrous or extremely low humidity conditions.     

Proton Conducting Membranes Based on Poly(2,2′‐imidazole‐5,5′‐bibenzimidazole)

Poly(2,2′‐imidazole‐5,5′‐bibenzimidazole) (PBI‐imi) was synthesized via the polycondensation between 3,3′,4,4′‐tetraaminobiphenyl and 4,5‐imidazole‐dicarboxylic acid. Effects of the reaction conditions on the intrinsic viscosity of the synthesized polymers were studied. The results show that the molecular weight of the polymers increases with increasing monomer concentration and reaction time, and then levels off. With higher reaction temperature, the molecular weight of the polymer is higher. With the additional imidazole group in the backbone, PBI‐imi shows improved phosphoric acid doping ability, as well as a little higher proton conductivity when compared with widely used poly[2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole] (PBI‐ph).Whereas, PBI‐imi and PBI‐ph have the similar chemical oxidation stability. PBI‐imi/3.0 H₃PO₄ composite membranes exhibit a proton conductivity as high as 10^–4 S cm^–1 at 150 °C under anhydrous condition. The temperature dependence of proton conductivity of acid doped PBI‐imi can be modeled by an Arrhenius equation.     

Preparation of inorganic–organic hybrid proton exchange membrane with chemically bound hydroxyethane diphosphonic acid

Proton‐conductive inorganic–organic hybrid intermediate‐temperature membranes were prepared from 3‐glycidoxypropyltrimethoxysilane (GPTMS) and 1‐hydroxyethane‐1,1‐diphosphonic acid (HEDPA) by sol–gel process. To prevent the leaching out of phosphonic acid, triethylamine was used as catalyst to promote the reaction of HEDPA and GPTMS to immobilize phosphonic acid groups. Fourier transform infrared spectra revealed that phosphonic acid groups of HEDPA were chemically bounded to organosiloxane network as a result of the reaction of P? OH of HEDPA and epoxy ring of GPTMS. TG‐DSC results indicated that the hybrid membranes were thermally stable up to 250°C. The proton conductivity of the hybrid membranes increased with temperature from 30 to 130°C. The proton conductivity of hybrid membrane with the molar ratio of GPTMS/HEDPA = 2/1 can reach up to 1.0 × 10^?3 S/cm under anhydrous condition at 130°C, which reveals that this membrane is a promising proton exchange membrane for intermediate‐temperature proton exchange membrane fuel cell. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Anhydrous proton conductive membrane consisting of chitosan

We have investigated a low production cost anhydrous proton conductor consisting of a composite of chitosan, one of the world's discarded materials, and methanediphosphonic acid (MP) having a high proton exchange capacity. This chitosan-200 wt.% MP composite material showed the high proton conductivity of 5 × 10⁻³ S cm⁻¹ at 150 °C under anhydrous conditions. Additionally, the proton conducting mechanism of the chitosan-MP composite material was due to proton transfer to the proton defect site without the assistance of diffusible vehicle molecules. The utilization of a biopolymer, such as chitosan, for PEMFC technologies is novel and challenging where biological products are usually considered as waste, non-hazardous, and environmentally benign. Especially, the low production cost of the biopolymer is an attractive feature. Anhydrous proton conducting biopolymer composite membranes may have potential not only for PEMFCs operated under anhydrous conditions, but also for bio-electrochemical devices including an implantable battery, bio-sensors, etc.     

Imidazole/(HPO3)3‐doped sulfonated poly (ether ether ketone) composite membrane for fuel cells

A novel gel of imidazole/(HPO₃)₃ was synthesized and incorporated into sulfonated poly (ether ether ketone) (SPEEK) to fabricate composite proton exchange membranes. The composite membranes were characterized by alternating current impedance (AC), thermogravimetry (TG), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), scanning electron microscope (SEM) and mechanical property test. Based on the electrochemical performance investigation, the proton conductivity of the membrane is intimately correlated with the temperature and the mass ratio of imidazole/(HPO₃)₃ in the composite. The SPEEK/imidazole/(HPO₃)₃?4 composite membrane (with 44.4 wt % of imidazole/(HPO₃)₃) has the optimized performance at 135°C. Mover, the strength of the composite membranes is almost comparable to that of Nafion membrane. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41946.     

Proton‐conducting blend membranes of crosslinked poly(vinyl alcohol)–sulfosuccinic acid ester and poly(1‐vinyl‐1,2,4‐triazole) for high temperature fuel cells

New type of composite membranes were synthesized by crosslinking of poly(vinyl alcohol) (PVA) with sulfosuccinic acid (SSA) and intercalating poly(1‐vinyl‐1,2,4‐triazole) (PVTri) into the resulting matrix. The complexed structure of the membranes was confirmed by Fourier transform infrared (FTIR) spectroscopy. The resulting hybrid membranes were transparent, flexible, and showed good thermal stability up to ～200°C. The proton conductivities of the membranes were investigated as a function of PVTri and SSA and operating temperature. The water/methanol uptake was measured and the results showed that solvent absorption of the materials increased with increasing PVTri content in the matrix. The proton conductivity of the membranes continuously increased with increasing SO₃H content, PVTri content, and the temperature. In the anhydrous state, the maximum proton conductivity is 7.7 × 10^?5 S/cm for PVA–SSA–PVTri‐1 and for PVA–SSA–PVTri‐3 is 1.6 × 10^?5 S/cm at 150°C. After humidification (RH = 100%), PVA–SSA–PVTri‐4 showed a maximum proton conductivity of 0.0028 S/cm at 60°C. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Synthesis and characterization of polybenzimidazole/α‐zirconium phosphate composites as proton exchange membrane

To improve the high‐temperature performance of proton exchange membranes, the polybenzimidazole (PBI)/α‐zirconium phosphate (α‐Zr(HPO₄)₂·nH₂O, α‐ZrP) proton exchange composite membranes were prepared in this study. PBI polymer containing a large amount of ether units has been synthesized from 3,3′‐ diaminobenzidine (DAB) and 4,4′‐oxybis (benzoic acid) by a direct polycondensation in polyphosphoric acid. The polymer exhibited a good solubility in most polar solvents. Inorganic proton conductor α‐ZrP nanoparticles have been obtained using a synthesis route involving separate nucleation and aging steps (SNAS). The effects of α‐ZrP doping content on the composite membrane performance were investigated. It was found that the introduction of ZrP improved the thermal stability of the composite membranes. The PBI/ZrP composite membranes exhibited excellent mechanical strength. The composite membrane with 10 wt% ZrP showed the highest proton conductivity of 0.192 S cm^?1 at 160°C under anhydrous condition. The proton conducting mechanism of the PBI/ZrP composite membranes was proposed to explain the proton transport phenomena. The experimental results suggested that the PBI/ZrP composite membranes may be a promising polymer electrolyte used in high temperature proton exchange membrane fuel cells (HT‐PEMFCs) under anhydrous condition. POLYM. ENG. SCI., 56:622–628, 2016. © 2016 Society of Plastics Engineers     

Preparation of pectin‐inorganic composite material as accumulative material of metal ions

Pectin is one of the biopolymers in the cell walls of all plant tissues, but the pectin‐containing materials have been discarded as industrial waste in food‐processing factories. We prepared a water‐insoluble pectin‐inorganic composite material by mixing pectin and a silane coupling reagent, bis(3‐trimethoxysilylpropyl)amine. The mechanical strength of the pectin‐inorganic composite material was higher than that of the pectin material without the addition of an inorganic component. In addition, the thermal stability of the composite material increased with the addition of the inorganic component. Furthermore, when the pectin‐inorganic composite materials were incubated in an aqueous solution of Cu(II), Zn(II), or In(III), these composite materials effectively accumulated not only the heavy metal ions, but also rare‐earth metal ions. Additionally, based on the infrared (IR) measurements, the metal ion accumulative mechanism into the composite material is described. As a result, the IR spectra suggested an electrostatic interaction between the metal ion and carboxy group in the pectin. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42056.     

Novel organic–inorganic composite material as a cation exchanger from a triterpenoidal system of dammar gum: synthesis,characterization and application

A pioneer study has been conducted to synthesize novel hydrogel starting from a non-cellulosic raw material, gum dammar-a triterpenoidal system, and then converting this hydrogel into an organic–inorganic composite zirconium-based ion exchanger. Gum dammar was cross-linked with polyacrylamide zirconium (IV) iodo-oxalate [Gd-cl-poly(AAm)-Zr (IV) iodo-oxalate] by incorporating inorganic precipitates into the polymeric mixture. The polymeric mixture was synthesized using gum dammar (Gd), acrylamide (AAm), N, N′-methylene-bis-acrylamide (MBA) and potassium persulphate (KPS). The reaction conditions for synthesis of hydrogel and ion exchanger such as time (120 min), temperature (70 °C), solvent (4 mL), concentration of monomer (12.97 × 10^?3 mol/L), initiator (1.48 × 10^?4 mol/L), cross-linker (4.22 × 10^?4 mol/L) and ratio of zirconium oxychloride (0.1 M), potassium iodate (0.1 M) and oxalic acid (0.1 M) in ratio 2:3:2 were optimized to obtain maximum ion exchange capacity (2.02 meq/g). The morphology and structure of hydrogel and ion exchanger were studied using FTIR, SEM, XRD and TGA/DTA/DTG. The SEM study was followed by energy dispersive spectroscopy for elemental analysis. The ion exchanger was quite stable in various acids and bases at low concentration but it completely dissolved in acids and bases at high concentrations. Distribution studies showed that the synthesized ion exchanger had high selectivity for Pb²⁺ ions. Thus, the polymeric-inorganic hybrid material showed integration of both inorganic and organic characteristics within the composite material.     

Montmorillonite‐reinforced sulfonated poly(phthalazinone ether sulfone ketone) nanocomposite proton exchange membranes for direct methanol fuel cells

To produce a composite membrane with high conductivity and low permeability, SPPESK with a degree of sulfonation of 101% was carefully selected for the preparation of montmorillonite (MMT)‐reinforced SPPESK using solution intercalation. The fundamental characteristics such as water uptake, swelling ratio, proton conductivity, methanol permeability, and mechanical properties of the composite membranes were studied. Water uptake is improved when organic MMT (OMMT) loading increase. The composite membranes with CTAB‐MMT loading of 4–0.5% show 0.143–0.150 S cm^?1 proton conductivity at 80°C, which approaches the value of Nafion112. In addition, methanol permeability was decreased to 6.29 × 10^?8 cm² s^?1 by the addition of 6 wt % OMMT. As a result, the SPPESK‐MMT composite membrane is a good candidate for use in direct methanol fuel cells. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39852.     

The effect of imidazolated PPO with different alkyl chains on its performance as a high temperature proton exchange membrane

ABSTRACT

Designed and synthesized a series of imidazolium-functionalized Poly (2, 6-dimethyl-1, 4-phenylene oxide) (Im-PPO) containing pendant imidazole groups, which were used to supply functional sites for acid–base interaction with the doping phosphoric acid. The imidazolium-functionalized Poly (2, 6-dimethyl-1, 4-phenylene oxide) membranes obtained by the solution-casting method were doped with phosphoric acid (PA). The PA content, swelling, and tensile strength of the different membranes doped with PA were measured. With the increase of the length of side chains on the imidazole groups, the membrane showed different properties. The proton conductivity at a level of 3.7 × 10^?2 S/cm was achieved at 160°C by the MeIm-PPO imidazolium composite membrane.     

Studies on anhydrous proton conducting membranes based on imidazole derivatives and sulfonated polyimide

Anhydrous proton conducting membranes based on sulfonated polyimide (sPI) and imidazole derivatives were prepared. The acid-base composite membranes show a good chemical oxidation stability and high thermal stability. The addition of imidazole derivatives in sPIs can improve the chemical oxidation stability of the composite membranes enormously, and even much better than that of pure sPI. The proton conductivity of a typical sPI/xUI(2-undecylimidazole) composite membrane can reach 10⁻³ S cm⁻¹ at 180 °C under the anhydrous condition. The proton conductivity of the acid-base composite membranes increases significantly with increasing content of UI. Moreover, UI in sPI/xUI composite membrane is difficult to be brought out by the vapor due to the existence of long hydrophobic moiety, which will improve the stability and lifetime of the membranes in the fuel cells.     

Anhydrous proton-conducting glass membranes doped with ionic liquid for intermediate-temperature fuel cells

Proton-conducting glass membranes based on SiO₂ monoliths and a protic ionic liquid (diethylmethylammonium trifluoromethanesulfonate, [dema][TfO]) as the anhydrous proton conductor were studied. The [dema][TfO]/SiO₂ hybrid glass membranes were prepared via a sol–gel process. The stability and ionic conductivity of the glass membrane were investigated. The [dema][TfO]/SiO₂ hybrid glass monoliths exhibit very high anhydrous ionic conductivities that exceed 10^?2 S cm^?1 at 120–220 °C.     

New organic–inorganic hybrid membranes based on sulfonated polyimide/aminopropyltriethoxysilane doping with sulfonated mesoporous silica for direct methanol fuel cells

A series of novel composite methanol‐blocking polymer electrolyte membranes based on sulfonated polyimide (SPI) and aminopropyltriethoxysilane (APTES) doping with sulfonated mesoporous silica (S‐mSiO₂) were prepared by the casting procedure. The microstructure and properties of the resulting hybrid membranes were extensively characterized. The crosslinking networks of amino silica phase together with sulfonated mesoporous silica improved the thermal stability of the hybrid membranes to a certain extent in the second decomposition temperature (250–400°C). The composite membranes doping with sulfonated mesoporous silica (SPI/APTES/S‐mSiO₂) displayed superior comprehensive performance to the SPI and SPI/APTES membranes, in which the homogeneously embedded S‐mSiO₂ provided new pathways for proton conduction, rendered more tortuous pathways as well as greater resistance for methanol crossover. The hybrid membrane with 3 wt % S‐mSiO₂ into SPI/APTES‐4 (SPI/A‐4) exhibited the methanol permeability of 4.68 × 10^?6 cm² s^?1at 25°C and proton conductivity of 0.184 S cm^?1 at 80°C and 100%RH, while SPI/A‐4 membrane had the methanol permeability of 5.16 × 10^?6 cm² s^?1 at 25°C and proton conductivity of 0.172 S cm^?1 at 80°C and 100%RH and Nafion 117 exhibited the values of 8.80 × 10^?6 cm² s^?1 and 0.176 S cm^?1 in the same test conditions, respectively. The hybrid membranes were stable up to about 80°C and demonstrated a higher ratio of proton conductivity to methanol permeability than that of Nafion117. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Novel membranes based on poly(5‐(methacrylamido)tetrazole) and sulfonated polysulfone for proton exchange membrane fuel cells

Proton‐exchange membrane fuel cells (PEMFC)s are increasingly regarded as promising environmentally benign power sources. Heterocyclic molecules are commonly used in the proton conducting membranes as dopant or polymer side group due to their high proton transfer ability. In this study, 5‐(methacrylamido)tetrazole monomer, prepared by the reaction of methacryloyl chloride with 5‐aminotetrazole, was polymerized via conventional free radical mechanism to achieve poly(5‐(methacrylamido)tetrazole) homopolymer. Novel composite membranes, SPSU‐PMTetX, were successfully produced by incorporating sulfonated polysulfone (SPSU) into poly(5‐(methacrylamido)tetrazole) (PMTet). The sulfonation of polysulfone was performed with trimethylsilyl chlorosulfonate and high degree of sulfonation (140%) was obtained. The homopolymers and composite membranes have been characterized by NMR, FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). ¹H‐NMR and FTIR confirmed the sulfonation of PSU and the ionic interaction between sulfonic acid and poly(5‐(methacrylamido)tetrazole) units. TGA showed that the polymer electrolyte membranes are thermally stable up to ～190°C. Scanning electron microscopy analysis indicated the homogeneity of the membranes. This result was also supported by the appearance of a single T_g in the DSC curves of the blends. Water uptake and proton conductivity measurements were, as well, carried out. Methanol permeability measurements showed that the composite membranes have similar methanol permeability values with Nafion 112. The maximum proton conductivity of anhydrous SPSU‐PMTet0.5 at 150°C was determined as 2.2 × 10^?6 S cm^?1 while in humidified conditions at 20°C a value of 6 × 10^?3 S cm^?1 was found for SPSU‐PMTet2. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40107.     

Novel composite polymer electrolyte membranes based on poly(vinyl phosphonic acid) and poly (5‐(methacrylamido)tetrazole)

Heterocyclic molecules are generally used in the proton conducting membranes as dopant or polymer side group due to their high proton transfer ability. Composite proton conducting membranes based on poly(vinylphosphonic acid) (PVPA) and poly(5‐(methacrylamido)tetrazole) (PMTet) were produced. The homopolymers, prepared from their corresponding monomers, were blended at several mol ratios to obtain the polymer electrolyte membranes. All samples were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), differantial scanning calorimetry (DSC), cyclic voltammetry (CV), and impedance analysis. Besides, the morphology of the membranes was studied by X‐ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). FTIR spectra confirmed the formation of hydrogen bonding network between PVPA and PMTet units. TGA showed that the polymer electrolyte membranes were thermally stable up to ～210°C. CV curves demonstrated the oxidative stability of the samples in 3 V region. In anhydrous conditions, the maximum proton conductivity was determined as 0.06 Scm^?1 at 150°C for PMTetP(VPA)₄. POLYM. ENG. SCI., 55:260–269, 2015. © 2014 Society of Plastics Engineers     

Enhancing the Anhydrous Proton Conductivity of Sulfonated Polysulfone/Polyvinyl Phosphonic Acid Composite Membranes With Hexagonal Boron Nitride

Hexagonal boron nitride (h-BN) particles have attracted increasing interest due to mechanical properties, chemical stability, electrical features, thermal stability, and good lubrication property. In this work hexagonal boron nitride were used as inorganic fillers, which increase the mechanical and thermal stabilities of the membrane. The proton conducting polymer membranes were prepared by blending of sulfonated polysulfone, polyvinyl phosphonic acid, and boron nitride. Scanning electron microscopy indicated the homogeneous distribution of hBN nanoparticles in the polymer matrix. hBN increased the proton conductivity and in the anhydrous state the maximum proton conductivity was determined as 7.9 × 10^?3 S/cm at 150°C for PVPA-SPSU-5hBN.     

Proton conductive YSZ-phosphate composite electrolyte for H2S SOFC

A new oxide-salt composite electrolyte, YSZ–K₃PO₄–Ca₃(PO₄)₂, shows proton conductivity in the order of 10^?2 S/cm at 700 °C. The proton transport number, determined using a hydrogen concentration cell, rises from more than 93% at 550 °C to 99% at 700 °C. The composite electrolyte is chemically stable in H₂S containing atmosphere, and so is a good candidate electrolyte material for H₂S solid oxide fuel cells applications.