Novel composite polymer electrolyte membranes based on poly(vinyl phosphonic acid) and poly (5‐(methacrylamido)tetrazole)

Heterocyclic molecules are generally used in the proton conducting membranes as dopant or polymer side group due to their high proton transfer ability. Composite proton conducting membranes based on poly(vinylphosphonic acid) (PVPA) and poly(5‐(methacrylamido)tetrazole) (PMTet) were produced. The homopolymers, prepared from their corresponding monomers, were blended at several mol ratios to obtain the polymer electrolyte membranes. All samples were characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), differantial scanning calorimetry (DSC), cyclic voltammetry (CV), and impedance analysis. Besides, the morphology of the membranes was studied by X‐ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). FTIR spectra confirmed the formation of hydrogen bonding network between PVPA and PMTet units. TGA showed that the polymer electrolyte membranes were thermally stable up to ～210°C. CV curves demonstrated the oxidative stability of the samples in 3 V region. In anhydrous conditions, the maximum proton conductivity was determined as 0.06 Scm^?1 at 150°C for PMTetP(VPA)₄. POLYM. ENG. SCI., 55:260–269, 2015. © 2014 Society of Plastics Engineers     

Montmorillonite‐reinforced sulfonated poly(phthalazinone ether sulfone ketone) nanocomposite proton exchange membranes for direct methanol fuel cells

To produce a composite membrane with high conductivity and low permeability, SPPESK with a degree of sulfonation of 101% was carefully selected for the preparation of montmorillonite (MMT)‐reinforced SPPESK using solution intercalation. The fundamental characteristics such as water uptake, swelling ratio, proton conductivity, methanol permeability, and mechanical properties of the composite membranes were studied. Water uptake is improved when organic MMT (OMMT) loading increase. The composite membranes with CTAB‐MMT loading of 4–0.5% show 0.143–0.150 S cm^?1 proton conductivity at 80°C, which approaches the value of Nafion112. In addition, methanol permeability was decreased to 6.29 × 10^?8 cm² s^?1 by the addition of 6 wt % OMMT. As a result, the SPPESK‐MMT composite membrane is a good candidate for use in direct methanol fuel cells. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39852.     

Sulfonated polysulfone as promising membranes for polymer electrolyte fuel cells

A new, milder sulfonation process was used to produce ion‐exchange polymers from a commercial polysulfone (PSU). Membranes obtained from the sulfonated polysulfone are potential substitutes for perfluorosulfonic acid membranes used now in polymer electrolyte fuel cells. Sulfonation levels from 20 to 50% were easily achieved by varying the content of the sulfonating agent and the reaction time. Ion‐exchange capacities from 0.5 to 1.2 mmol SO₃H/g polymer were found via elemental analysis and titration. Proton conductivities between 10⁻⁶ and 10⁻² S cm⁻¹ were measured at room temperature. An increase in intrinsic viscosity with increasing sulfonation degree confirms that the sulfonation process helps to preserve the polymer chain from degradation. Thermal analysis of the sulfonated polysulfone (SPSU) samples reveals higher glass transition temperatures and lower decomposition temperatures with respect to the unsulfonated sample (PSU). Amorphous structures for both PSU and SPSU membranes were detected by X‐ray diffraction analysis and differential scanning calorimetry. Preliminary tests in fuel cells have shown encouraging results in terms of cell performance. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1250–1257, 2000     

Polyacrylonitrile‐based proton conducting membranes containing sulfonic acid and tetrazole moieties

Proton conducting membranes based on polymers containing sulfonic acid and tetrazole moieties were developed. Successful syntheses of poly(acrylonitrile‐co ‐styrene sulfonic acid) (PAN‐co ‐PSSA), poly(acrylonitrile‐co ‐5‐vinyl tetrazole) (PAN‐co ‐PVTz), and poly(acrylonitrile‐co ‐5‐vinyl tetrazole‐co ‐styrene sulfonic acid) (PAN‐co ‐PVTz‐co ‐PSSA) were confirmed by ¹H‐nuclear magnetic resonance spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy. Two approaches were performed to study the effects of molar ratio of sulfonic acid to tetrazole and tetrazole content on membrane properties. In the first approach, PAN‐co ‐PSSA was blended with PAN‐co ‐PVTz at three molar ratios. The second approach focused on PAN‐co ‐PVTz‐co ‐PSSA membranes with various tetrazole contents. PAN‐co ‐PSSA membrane was also prepared. All solution‐cast membranes were hydrolytically stable, except for PAN‐co ‐PVTz‐co ‐PSSA with 71% tetrazole. Surface morphologies of blend membranes were studied using scanning electron microscopy, and no phase separation was observed. Water uptake was shown to increase with increasing tetrazole. All membranes exhibited high thermal stability (up to 250 °C) and high storage moduli. Proton conductivity was found to depend significantly on relative humidity. The influences of sulfonic acid to tetrazole ratio and tetrazole content on proton conduction were observed and discussed. A maximum proton conductivity of 7.1 × 10^?3 S/cm at 26 °C was obtained from PAN‐co ‐PSSA membrane. In addition, all tested membranes showed relatively good oxidative stability after treatment in Fenton's reagent. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45411.     

Proton‐conducting blend membranes of crosslinked poly(vinyl alcohol)–sulfosuccinic acid ester and poly(1‐vinyl‐1,2,4‐triazole) for high temperature fuel cells

New type of composite membranes were synthesized by crosslinking of poly(vinyl alcohol) (PVA) with sulfosuccinic acid (SSA) and intercalating poly(1‐vinyl‐1,2,4‐triazole) (PVTri) into the resulting matrix. The complexed structure of the membranes was confirmed by Fourier transform infrared (FTIR) spectroscopy. The resulting hybrid membranes were transparent, flexible, and showed good thermal stability up to ～200°C. The proton conductivities of the membranes were investigated as a function of PVTri and SSA and operating temperature. The water/methanol uptake was measured and the results showed that solvent absorption of the materials increased with increasing PVTri content in the matrix. The proton conductivity of the membranes continuously increased with increasing SO₃H content, PVTri content, and the temperature. In the anhydrous state, the maximum proton conductivity is 7.7 × 10^?5 S/cm for PVA–SSA–PVTri‐1 and for PVA–SSA–PVTri‐3 is 1.6 × 10^?5 S/cm at 150°C. After humidification (RH = 100%), PVA–SSA–PVTri‐4 showed a maximum proton conductivity of 0.0028 S/cm at 60°C. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Sulfonated graphene oxide‐doped proton conductive membranes based on polymer blends of highly sulfonated poly(ether ether ketone) and sulfonated polybenzimidazole

Simultaneously improving the proton conductivity and mechanical properties of a polymer electrolyte membrane is a considerable challenge in commercializing proton exchange membrane fuel cells. In response, we prepared a new series of miscible polymer blends and thus the corresponding crosslinked membranes based on highly sulfonated poly(ether ether ketone) and sulfonated polybenzimidazole. The blended membranes showed more compact structures, due to the acid‐base interactions between the two constituents, and improved mechanical and morphological properties. Further efforts by doping sulfonated graphene oxide (s‐GO) forming composite membranes led to not only significantly elevated proton conductivity and electrochemical performance, but also better mechanical properties. Notably, the composite membrane with the filler content of 15 wt % exhibited a proton conductivity of 0.217 S cm^?1 at 80 °C, and its maximum power density tested by the H₂/air single PEMFC cell at room temperature reached 171 mW cm^?2, almost two and half folds compared with that of the native membrane. As a result, these polymeric membranes provided new options as proton exchange membranes for fuel‐cell applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46547.     

Sulfonated poly(bis‐A)‐sulfones as proton exchange membranes for direct methanol fuel cell application

Sulfonated poly(bis‐A)‐sulfone (SPSF) samples were prepared by a mild postsulfonation method using trimethylsilyl chlorosulfonate as sulfonation agent, and their thermal and mechanical properties were evaluated. The serials of SPSF membranes are thermally stable up to 450°C in air. When compared with the poly(bis‐A)‐sulfone membrane, the hydrophilicity and water uptake of the SPSF membranes are enhanced. A microphase‐separated structure comprised of hydrophilic and hydrophobic polymer backbone was observed from atomic force microscopy phase images. The hydrophilic ionic clusters become continuous to form channels when ion exchange capacity (IEC) reached 1.47 mequiv/g. Moreover, the membranes showed very good proton conductivities (20°C, 0.01–0.11 S/cm) and low‐methanol permeability (0.09–3.06 × 10^?6 cm²/s), and the methanol diffusion coefficients were lower than that of Nafion112 (1.35 × 10^?6 cm²/s) with IEC values from 0.70 to 1.47 mequiv/g. However, the Fenton's reagent test revealed that the membranes exhibited very poor oxidation stability, which is the main defect limiting the application of SPSF for proton exchange membranes. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Preparation and properties of bisphenol A‐based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

Novel bisphenol A‐based sulfonated poly(arylene ether sulfone) (bi A‐SPAES) copolymers were successfully synthesized via direct copolymerization of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenylsulfone, 4,4′‐dichlorodiphenylsulfone, and bisphenol A. The copolymer structure was confirmed by Fourier transform infrared spectra and ¹H NMR analysis. The series of sulfonated copolymers based membranes were prepared and evaluated for proton exchange membranes (PEM). The membranes showed good thermal stability and mechanical property. Transmission electron microscopy was used to obtain the microstructures of the synthesized polymers. The membranes exhibit increased water uptake from 8% to 66%, ion exchange capacities from 0.41 to 2.18 meq/g and proton conductivities (25°C) from 0.012 to 0.102 S/cm with the degree of sulfonation increasing. The proton conductivities of bi A‐SPAES‐6 membrane (0.10–0.15 S/cm) with high‐sulfonated degree are higher than that of Nafion 117 membrane (0.095–0.117 S/cm) at all temperatures (20–100°C). Especially, the methanol diffusion coefficients of membranes (1.7 × 10^?8 cm²/s–8.5 × 10^?7 cm²/s) are much lower than that of Nafion 117 membrane (2.1 × 10^?6 cm²/s). The new synthesized copolymer was therefore proposed as a candidate of material for PEM in direct methanol fuel cell. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(arylene ether)s carrying pendant (3‐sulfonated) phenylsulfonyl groups

A series of poly(arylene ether)s with biphenyl units and pendant sulfonated phenylsulfonyl groups was prepared via nucleophilic aromatic substitution reactions of varying ratios of 3,5‐difluoro‐3′‐sulfonated diphenylsulfone and 4,4′‐difluorodiphenylsulfone with 4,4′‐biphenol. As such, the sulfonic acid moieties reside in the meta position of a pendant, electron‐poor phenylsulfonyl group. Mechanically robust proton‐exchange membranes with ion‐exchange capacities (IEC) ranging from 0.91 to 2.05 meq g^?1 were cast from dimethylacetamide. The thermal stability of the membranes was evaluated via thermogravimetric analysis and the 5% weight losses were found to be in excess of 330 °C in air. The glass transition temperatures were determined, via differential scanning calorimetry, to range from a low of 148 to a high of 209 °C at IEC values of 0.91 and 1.79 meq g^?1, respectively. The copolymer membranes reached proton conductivities as high as 142 mS cm^?1 under 100% relative humidity, with relatively low water uptake values (8–32 wt%). Copyright © 2012 Society of Chemical Industry     

Modification of SPPESK proton exchange membranes through layer‐by‐layer self‐assembly

Sulfonated poly(phthalazinone ether sulfone ketone) (SPPESK) composite membranes are fabricated through electrostatic layer‐by‐layer (LbL) self‐assembly method with chitosan (CS) and phosphotungstic acid (PWA) to enhance the proton conductivity and stability. The results demonstrate that LbL self‐assembly has different effects on the SPPESK membrane substrates with different sulfonation degrees (DSs). It elevates proton conductivity of the SPPESK membrane of lower DS and enhances swelling stability of the SPPESK membrane of higher DS. For instance, at 80°C, proton conductivity of the SPPESK0.74/(CS/PWA)₁ membrane (lower DS) increases by 16%–96.49 mS cm^?1, and swelling ratio of the SPPESK1.01/(CS/PWA)₃ membrane (higher DS) decreases from 58 to 29%. Attribute to the electrostatic interaction and ion cross‐linking networks, permeability of the SPPESK0.74/(CS/PWA)₃ membrane and the SPPESK1.01/(CS/PWA)₅ membrane are reduced by 45 and 30%, respectively. The results indicate that the LbL self‐assembly has broadened the available DS range for fuel cell applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42867.     

Synthesis and Characterization of Sulfonated Cardo Poly(Arylene Ether Sulfone)s for Fuel Cell Proton Exchange Membrane Application

Sulfonated cardo poly(arylene ether sulfone)s ( SPPA ‐ PES ) with various degrees of sulfonation (DS) were prepared by post‐sulfonation of synthesized phenolphthalein anilide ( PPA ; N‐phenyl‐3,3′‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrolidone) poly(arylene ether sulfone)s ( PPA ‐ PES ) by using concentrated sulfuric acid. PPA ‐ PES copolymers were synthesized by direct polycondensation of PPA with bis‐(4‐fluorophenyl)‐sulfone and 4,4′‐sulfonyldiphenol. The DS was varied with different mole ratios of PPA (24, 30, 40, 50 mol.%) in the polymer. The structure of the resulting SPPA ‐ PES copolymers and the different contents of the sulfonated unit were studied by Fourier transform infrared (FT‐IR) spectroscopy, ¹H NMR spectroscopy, and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymer with water. The ion exchange capacity (IEC) and proton conductivity of SPPA ‐ PES were evaluated according to the increase of DS. The water uptake (WU) of the resulting SPPA ‐ PES membranes was in the range of 20–72%, compared with 28% for Nafion 211®. The SPPA ‐ PES membranes showed proton conductivities of 23–82 mS cm^–1, compared with 194 mS cm^–1 for Nafion 211®, under 100% relative humidity (RH) at 80 °C.     

Lithium sulfonate promoted compatibilization in single ion conducting solid polymer electrolytes based on lithium salt of sulfonated polysulfone and polyether epoxy

Polymeric lithium salts of sulfonated polysulfone (SPSU(X)Li) were synthesized via post sulfonation route followed by ion exchange. A novel single ion conducting solid polymer electrolyte (SPE) was prepared by curing poly(ethylene glycol)diglycidyl ether (PEGDGE) with 4,4′ diaminodiphenyl sulfone (DDS) in SPSU(X)Li matrix. The ionic conductivity, thermal stability and tensile properties were investigated as a function of degree of sulfonation and PEGDGE concentration. The introduction of lithium sulfonate groups in polysulfone promoted compatibility of SPSU(X)Li and PEGDGE in SPE. AFM analysis demonstrated heterogeneous phase morphology and reduction in size of dispersed PEGDGE phase with increasing degree of sulfonation. The interactions between lithium sulfonate and polyether epoxy improved thermal stability of the epoxy network. The enhanced compatibility also caused improvement in elongation at break compared to neat SPSU(X)Li. The higher Li⁺ ion concentration and the segmental mobility of the polymer chains above T_g contributed to the high ionic conductivity at high temperature in the single ion conducting SPE.     

Preparation and characterization of proton exchange membrane based on polyphosphoric acid modified by PVDF‐HFP

A polyphosphoric acid functionalized proton exchange membrane (PEM) was prepared by a ring opening reaction using the epoxycyclohexylethyltrimethoxysilane (EHTMS) and amino trimethylene phosphonic acid (ATMP) as raw materials and was modified by poly(vinylidene fluoride)–hexafluoro propylene (PVDF‐HFP). The structure of the membranes was characterized by Fourier transform infrared and scanning electron microscopy. The X‐ray photoelectron spectroscopy explores the content of the elements in the membrane related to the ion exchange capacity value. The membranes’ properties including water uptake, swelling ratio, proton conductivity, and hydrolysis stability were studied. Performance tests show that when ATMP/EHTMS = 1/5, conductivity of the PVDF‐HFP modified PEMs increased from 0.83 × 10^?4 S cm^?1 at 20 °C to 9.53 × 10^?3 S cm^?1 at 160 °C, the swelling ratio of membranes decreased from 2.71% to 2.13%. The results indicate that the introduction of F atoms is beneficial to increase the proton conductivity and the dimensional stability. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46737.     

Nanostructured membranes based on sulfonated poly(aryl ether sulfone) and silica for fuel‐cell applications

Nanostructured sulfonated poly(aryl ether sulfone) (SPSU) membranes were made from SPSU/silica composites through the addition of amorphous, precipitated, and micronized silica particles (Tixosil 333) and short or segmented linear structures. Linear and branched segments of silica were obtained from the in situ reaction of tetraethoxysilane (TEOS) in an SPSU solution through a sol–gel acid‐catalyzed process. Different amounts of silica in the SPSU composites were prepared to evaluate their influence on the ionic conductivity, the water and alcohol solution sorption capacities, and the stability in an ethanol medium. The effect of silica (Tixosil) on the conductivity was higher than that of the silica made from TEOS in SPSU composites. The conductivities of the membranes containing 10% Tixosil and 6.6% silica prepared from TEOS were measured at 80°C; their values were 60 and 33 mS/cm, respectively. Furthermore, a membrane made of a silica blend (5% Tixosil and 3% TEOS) in SPSU attained a value of 92 mS/cm, whereas the commercial membrane Nafion 117, used as a reference, had a conductivity of 54 mS/cm measured under the same conditions. All those composites membranes could be used as components in hydrogen fuel cell. However, only the SPSU/2% Tixosil composite could be used in both hydrogen and ethanol direct fuel cells. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Physical and electrochemical behaviors of directly polymerized sulfonated poly(arylene ether ketone sulfone)s proton exchange membranes with different backbone structures

Sulfonated poly(ether ether ketone sulfone) (SPEEKS) and sulfonated poly(ether ether ketone ketone sulfone) (SPEEKKS) copolymers with different degree of sulfonation (DS) were synthesized by aromatic nucleophilic polycondensation of disodium 3,3′‐disulfonate‐4,4′‐dichloro‐diphenylsulfone (SDCDPS), tertbutylhydroquione, and 4,4′‐difluorobenzophenone or 1,4′‐bi(4‐fluorobenzoyl) benzene. Prepared sulfonated copolymers were characterized by Fourier transform infrared spectra, thermogravimetric analysis, and differential scanning calorimetry. The transmission electron microscope was used to investigate the microstructure of membranes. The different distance between two adjacent sulfonic groups in two series of membranes resulted in different physical and electrochemical properties between two kinds of membranes with the same DS. The proton conductivity, ionic exchange capacity and water uptake of SPEEKS membranes were higher than those of SPEEKKS membranes while the mechanical strength of SPEEKS membranes was lower than that of SPEEKKS membranes at the same DS. Moreover, the SPEEKKS membranes with DS equals to 0.8 showed a good combination of a high proton conductivity (0.046 S/cm at 25°C, 0.061 S/cm at 80°C), acceptable water uptake (33–65 wt %), excellent mechanical strength (tensile strength reached 49.7 MPa), and good thermal properties (T_g above 250°C, T_d5% above 300°C). It suggested that this could be a promising membrane for proton exchange membrane fuel cell application. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Development and characterization of homogeneous membranes prepared from sulfonated poly(phenylene oxide)

This article investigates the comprehensive properties of sulfonated poly(phenylene oxide) (SPPO) membranes with different sulfonation degrees and presents the completion of previous work necessary for the application of SPPO membranes to proton‐exchange membrane fuel cells. The sulfonation level has been accurately determined by conductometric titration and ¹H‐NMR, and the glass‐transition temperature has been obtained with both differential scanning calorimetry and dynamic mechanical thermal analysis. Sulfonic groups attached to the aromatic ring in the poly(phenylene oxide) backbone split at 220–340°C, but the main‐chain splitting temperature of SPPO is similar to that of the pure polymer. In addition, the effects of sulfonic groups and water on the tensile strength of these membranes have been studied. An increase in the sulfonate groups in the polymer results in an increase in the water uptake. Atomic force microscopy phase images of the acid‐form membranes clearly show the hydrophilic domains, and the ionic regions of the membranes with a low sulfonation degree are isolated and become connected to produce a cocontinuous morphology as the degree of sulfonation increases. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1244–1250, 2005     

Proton exchange membranes prepared by simultaneous radiation grafting of styrene onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) films. II. Properties of sulfonated membranes

Proton exchange membranes were prepared by radiation‐induced grafting of styrene onto commercial poly(tetrafluoroethylene‐co‐hexafluoropropylene) films using a simultaneous irradiation technique followed by a sulfonation reaction. The resulting membranes were characterized by measuring their physicochemical properties such as water uptake, ion exchange capacity, hydration number, and proton conductivity as a function of the degree of grafting. The thermal properties (melting and glass transition temperatures) and thermal stability of the membrane were also investigated using differential scanning calorimetry and thermal gravimetric analysis, respectively. Membranes having degrees of grafting of 16% and above showed proton conductivity of the magnitude of 10⁻² Ω⁻¹ cm⁻¹ at room temperature, as well as thermal stability at up to 290°C under an oxygen atmosphere. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2443–2453, 2000     

Imidazole/(HPO3)3‐doped sulfonated poly (ether ether ketone) composite membrane for fuel cells

A novel gel of imidazole/(HPO₃)₃ was synthesized and incorporated into sulfonated poly (ether ether ketone) (SPEEK) to fabricate composite proton exchange membranes. The composite membranes were characterized by alternating current impedance (AC), thermogravimetry (TG), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), scanning electron microscope (SEM) and mechanical property test. Based on the electrochemical performance investigation, the proton conductivity of the membrane is intimately correlated with the temperature and the mass ratio of imidazole/(HPO₃)₃ in the composite. The SPEEK/imidazole/(HPO₃)₃?4 composite membrane (with 44.4 wt % of imidazole/(HPO₃)₃) has the optimized performance at 135°C. Mover, the strength of the composite membranes is almost comparable to that of Nafion membrane. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41946.     

Vinyl‐addition type norbornene copolymers containing flexible spacers and sulfonated pendant groups for proton exchange membranes

Novel sulfonated poly(2‐butoxymethylenenorbornene‐co‐2‐(6‐phenoxy‐hexyloxymethylene)‐5‐norbornene [sP(BN/PhHN)] were prepared successfully through vinyl‐addition type polymerization and then sulfonated with concentrated sulfuric acid (98%) as sulfonating agent in a component solvent. The sP(BN/PhHN)‐40 with the maximal degree of sulfonation of 40% can be obtained by controlling the sulfonating reaction time from 8 to 20 h, and a proton conductivity of 3.35 × 10^?3 S/cm was achieved at 70°C. The methanol permeabilities of these membranes were in the range from 0.26 to 6.58 × 10^?7 cm²/s, which were remarkably lower than Nafion (2.36 × 10^?6 cm²/s). TEM analysis revealed that these side‐chain type membranes have a microphase separated structure composed of hydrophilic side‐chain domains and hydrophobic polynorbornene main chain domains. Sulfonated polynorbornene containing soft spacers displayed better properties, such as lower water uptake, high thermal properties, mechanical properties, and low methanol permeability. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(ethylene glycol) crosslinked sulfonated polysulfone composite membranes for forward osmosis

Forward osmosis (FO) membranes were prepared by a coating method with poly(ethylene glycol) crosslinked sulfonated polysulfone (SPSf) as a selective layer. The poly(ether sulfone)/SPSf substrate was prepared by phase inversion. The composite membranes were characterized with respect to membrane chemistry (by attenuated total reflectance/Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy), hydrophilicity (by static contact angle measurement), and surface morphology (by scanning electron microscopy and atomic force microscopy). The FO performance was also characterized. The effects of the crosslinker concentration on the hydrophilicity and FO performance were investigated. The crosslinked membrane exhibited a high hydrophilicity with a lowest contact angle of 15.5°. Under FO tests, the membranes achieved a higher water flux of 15.2 L m^?2 h^?1 when used against deionized water as the feed solution and a 2 mol/L sodium chloride (NaCl) solution as the the draw solution. The membranes achieved a magnesium sulfate rejection of 96% and an NaCl rejection of 55% when used against a 1 g/L inorganic salt solution as the feed solution and a 2 mol/L glucose solution as the draw solution. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43941.