Improving the interlaminar shear strength and thermal conductivity of carbon fiber/epoxy laminates by utilizing the graphene-coated carbon fiber

The poor interlaminar properties restrict the application of carbon fiber reinforced polymer (CFRP) composites. In this work, a novel method for fabricating a graded interface structure is developed to improve the through-thickness thermal conductivity of CFRP composites. High-strength graphene nano-plates (GnP) and phenolic resin (PF) were selected to deposit on the surface of carbon fiber to design a novel CF/Epoxy laminates, where a simultaneous improvement of interlaminar shear strength (ILSS) and through-thickness thermal conductivity was observed. With addition of 1 wt % of GnP-PF in CF, 37.04% increase of the ILSS, and 16.67% enhancement of thermal conductivity compared to the original CFRP. The mechanism for improvement of both ILSS and thermal conductivity was studied by scanning electron microscopy and nano-indentation, where a better interface formed by GnP-PF has been clearly observed. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47061.     

Enhanced mechanical and electrical properties of carbon fiber/poly(ether ether ketone) laminates via inserting carbon nanotubes interleaves

The carbon fiber/(carbon nanotubes/polyetherimide)/poly ether ether ketone (CF/(CNTs/PEI)/PEEK) laminates are prepared by inserting carbon nanotubes/polyetherimide (CNTs/PEI) interleaves into interlaminar region. The mechanical properties and electrical conductivities of the developed laminates are evaluated. The results indicate that the interlaminar shear strength and flexural strength of CF/(CNTs/PEI)/PEEK laminates are increased by 42.9% and 24.7%, after inserting CNTs2.91/PEI interleaves, respectively. The cross-sectional images of laminates after mechanical tests verify strong fiber-resin adhesion by scanning electron microscope observation. The pertinent mechanism responsible for the improvement of mechanical properties is mechanical interlocking effect of CNTs. After incorporating CNTs/PEI interleaves, the electrical conductivity of laminates is markedly improved due to the formation of conductive pathway. This work suggests that this method is compatible with the preparation process of thermoplastic composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48658.     

Influence of multiwalled carbon nanotubes on the processing behavior of epoxy powder compositions and on the mechanical properties of their fiber reinforced composites

This study reports the preparation of advanced carbon fiber composites with a nanocomposite matrix prepared by dispersing multiwall carbon nanotubes (CNTs) in a powder type epoxy oligomer with two different processing techniques (1) master batch dilution technique and (2) direct mixing (with the help of twin‐screw extruder in both cases). The master batch technique shows a better efficiency for the dispersion of the CNTs aggregates. The rheological results demonstrate that the incorporation of the CNTs into the epoxy oligomer leads, as expected, to a marked increase in the viscosity and of the presence of a yield stress point that also depends on the processing technique adopted. Carbon fiber (CFRP) and glass fiber (GFRP) composite materials were produced by electrostatic spraying of the epoxy matrix formulations on the carbon and glass fabric, respectively, followed by calendering and mold pressing. The mechanical properties of the obtained epoxy/CNT‐matrix composite materials, such as interlaminar fracture toughness, flexural strength, shear storage and loss moduli are discussed in terms of the processing techniques and fabric material. The incorporation of 1 wt% CNTs in the epoxy matrix results in a relevant increase of the fracture toughness, flexural strength and modulus of both CFRP and GFRP. POLYM. COMPOS., 37:2377–2383, 2016. © 2015 Society of Plastics Engineers     

Mechanical and electrical properties of aligned carbon nanotube/carbon matrix composites

To synthesize carbon nanotube/carbon matrix (CNT/C) composites rivaling or exceeding the mechanical and electrical properties of current carbon fiber/carbon matrix composites, it is essential to align carbon nanotubes in the composite. In this work, we fabricated CNT/polyacrylonitrile (PAN) precursor composites with high degree of CNT alignment, and carbonized and graphitized them at high temperatures. Carbonizing the precursor composites significantly improved their elastic modulus, strength, and electrical conductivity. The matrix was uniformly carbonized and highly graphitized. The excellent mechanical and electrical properties make the CNT/C composites promising for many high temperature aerospace applications.     

Mechanical properties of carbon nanotube/carbon fiber reinforced thermoplastic polymer composite

Carbon nanotube (CNT)/carbon fiber (CF) hybrid fiber was fabricated by sizing unsized CF tow with a sizing agent containing CNT. The hybrid fiber was used to reinforce a thermoplastic polymer to prepare multiscale composite. The mechanical properties of the multiscale composite were characterized. Compared with the base composite (traditional commercial CF), the multiscale composite reinforced by the CNT/CF hybrid fiber shows increases in interlaminar shear strength (ILSS) and impact toughness. Laminate containing CNTs showed a 115.4% increase in ILSS and 27.0% increase in impact toughness. The reinforcing mechanism was also discussed by observing the impact fracture morphology. POLYM. COMPOS., 38:2001–2008, 2017. © 2015 Society of Plastics Engineers     

Enhancing the thermal conductivity and compressive modulus of carbon fiber polymer-matrix composites in the through-thickness direction by nanostructuring the interlaminar interface with carbon black

Heat dissipation from aircraft is important. Carbon fiber polymer-matrix structural composites have high in-plane thermal conductivity, but low through-thickness conductivity. A nanostructuring method involving carbon black at the interlaminar interface was developed to improve the through-thickness conductivity. Ethylene glycol monoethyl ether (EGME) was used for dispersing the carbon black and to partially dissolution of the epoxy resin on the fiber-epoxy prepreg surface. EGME evaporated from the prepreg surface prior to composite fabrication. The optimum carbon black content in EGME for attaining high through-thickness conductivity was 0.8 wt.% for both unidirectional and crossply configurations. Applying EGME without carbon black improved the conductivity by up to 36%, but in the case with carbon black, the improvement was up to 210%. For the same interlaminar interface modification (except for EGME with 1.2 wt.% carbon black), the conductivity and its fractional increase were higher for the crossply configuration than the corresponding unidirectional configuration. The through-thickness compressive modulus and the flexural modulus were increased by up to 14% and 11%, respectively by using EGME with carbon black. The average thickness of the interlaminar interface increased with increasing carbon black content, but it was decreased by the use of EGME alone.     

Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber‐reinforced epoxy composites using a developed spraying processing

Carbon fiber‐reinforced epoxy composites, with incorporated carboxylic multiwall carbon nanotubes (CNTs), were prepared using vacuum‐assisted resin infusion (VARI) molding, and the in‐plane and out‐of‐plane properties, including mode‐I (G_Ic) and mode‐II (G_IIc) interlaminar fracture toughness, interlaminar shear strength (ILSS), tensile, and flexural properties were measured. A novel spraying technique, which sprays a kind of epoxy resin E20 with high viscosity after spraying the CNTs, was adopted to deposit the CNTs on the surface of carbon fiber fabric. The E20 was used to anchor CNTs on the fabric surface, avoiding that the deposited CNTs were removed by the infusing resin during VARI process. The spraying processing, including spraying amount and spraying sequence, was optimized based on the distribution of CNTs on the fibers. After that, three composite specimen groups were fabricated using different carbon fiber fabrics, including as‐received, CNT‐deposited with E20, and CNT‐deposited without E20. The effects of CNTs on the processing quality and mechanical properties of carbon fiber‐reinforced polymer composites were studied. The experimental results show that all studied laminates have uniform thickness with designed values and no obvious defects form inside the laminates. Compared with the composite without CNTs, depositing CNTs with E20 increases by 24% in the average propagation G_Ic, by 11% in the propagation G_IIc and by 12% in the ILSS, while it preserves the in‐plane mechanical properties, However, depositing CNTs without E20 reduces interlaminar fracture toughness. These phenomena are attributed to the differences in the distribution of CNTs and the fiber/matrix interfacial bonding for different spraying processing. POLYM. COMPOS., 2013. © 2012 Society of Plastics Engineers     

Improving delamination resistance of carbon fiber reinforced polymeric composite by interface engineering using carbonaceous nanofillers through electrophoretic deposition: An assessment at different in-service temperatures

In this article, modification of carbon fiber surface by carbon based nanofillers (multi-walled carbon nanotubes [CNT], carbon nanofibers, and multi-layered graphene) has been achieved by electrophoretic deposition technique to improve its interfacial bonding with epoxy matrix, with a target to improve the mechanical performance of carbon fiber reinforced polymer composites. Flexural and short beam shear properties of the composites were studied at extreme temperature conditions; in-situ cryo, room and elevated temperature (−196, 30, and 120°C respectively). Laminate reinforced with CNT grafted carbon fibers exhibited highest delamination resistance with maximum improvement in flexural strength as well as in inter-laminar shear strength (ILSS) among all the carbon fiber reinforced epoxy (CE) composites at all in-situ temperatures. CNT modified CE composite showed increment of 9% in flexural strength and 17.43% in ILSS when compared to that of unmodified CE composite at room temperature (30°C). Thermomechanical properties were investigated using dynamic mechanical analysis. Fractography was also carried out to study different modes of failure of the composites.     

聚丙烯/碳纳米管复合材料的研究进展

聚丙烯（PP）作为通用型热塑性塑料,具有物理性能优异、成型加工简单、密度小以及原料来源丰富等优点,广泛应用于电器、汽车和包装等行业。但是PP具有韧性差、低温脆性突出、抗冲击性能不佳、介电常数低、制品尺寸稳定性差等诸多缺点。碳纳米管（CNT）不仅具有独特的管状结构,还具有优异的力学、导电、导热以及耐磨等性能。将CNT和PP进行复合并制备出具有导电、导热、耐磨等高性能复合材料具有广阔的应用前景。因此,本文重点综述PP和CNT复合材料的新进展,主要包括结晶行为、力学性能、电学性能、摩擦性能、导热性能以及其他性能。针对现阶段PP/CNT复合材料研究和开发过程中存在的问题提出意见和建议,并对PP/CNT复合材料的未来发展做出展望。     

Research on the mechanical properties prediction of carbon/epoxy composite laminates with different void contents

The influence of the porosity on the static mechanical strength of the carbon fiber fabric reinforced epoxy composites laminates was investigated. The tensile, compressive, bending, and interlaminar strength test on the CFRP laminates with porosity of 0.33% and 1.50% were conducted and simulated by a finite element analysis model. The article proposes the failure criterion of the static mechanical strength of the fabric fiber reinforced composites based on the improved Hashin failure criterion that is suitable for the undirectional composite laminates. The basic composite strength parameters are used to evaluate the mechanical properties of CFRP laminates with different porosities. A finite element analysis model is established by using software ABAQUS™ combined with the sudden stiffness degradation model. The experiment results show that the tensile, compressive, bending, and interlaminar strength decrease with the increasing porosities. The tensile, compressive, bending, and interlaminar strength of the fabric carbon fiber reinforced epoxy composites laminates are simulated accurately by the finite element model. POLYM. COMPOS., 14–20, 2016. © 2014 Society of Plastics Engineers     

Effect of solid state grinding on properties of PP/PET blends and their composites with carbon nanotubes

In this study, it was aimed to improve electrical conductivity and mechanical properties of conductive polymer composites, composed of polypropylene (PP), poly(ethylene terephthalate) (PET), and carbon nanotubes (CNT). Grinding, a type of solid state processing technique, was applied to PP/PET and PP/PET/CNT systems to reduce average domain size of blend phases and to improve interfacial adhesion between these phases. Surface energy measurements showed that carbon nanotubes might be selectively localized at PET phase of immiscible blend systems. Grinding technique exhibited improvement in electrical conductivity and mechanical properties of PP/PET/CNT systems at low PET compositions. Ground composites molded below the melting temperature of PET exhibited higher tensile strength and modulus values than those prepared above the melting temperature of PET. According to SEM micrographs, micron‐sized domain structures were obtained with ground composite systems in which PET was the minor phase. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effects of electrophoretic deposition process parameters on the mechanical properties of graphene carboxyl-grafted carbon fiber reinforced polymer composite

Carbon fiber (CF) modification by grafting of various graphene-based nanofillers (GBN) by electrophoretic deposition (EPD) technique was proven to be a successful technique to enhance the out-of-plane performance of carbon fiber reinforced polymer (CFRP) composites. Graphene carboxyl (G-COOH) grafting on carbon fiber by electrophoretic deposition (EPD) is a promising technique to improve the mechanical properties of CFRP composites. To our knowledge, there is a dearth of literature available on the effect of EPD process parameters on the mechanical behavior of modified CFRP composites. The aim of this study is to evaluate the effect of nanofiller concentration in the suspension, applied current, and the time of deposition during EPD on the mechanical behavior of nanophase CFRP composites, thus making it a novel work. With increasing concentration, interlaminar shear strength (ILSS) improved consistently and has shown a maximum enhancement of 24.7% than that of neat CFRP composite at 1.5 g/L nanofiller concentration, whereas flexural strength remained almost unaffected with varying concentration. On the contrary, variation of deposition current has affected the flexural strength but not ILSS. The maximum flexural strength was obtained at a deposition current of 5.0A with an improvement of 16.3% in comparison with neat CFRP samples. However, both flexural strength and ILSS of hybrid CFRP composites have shown improvement with increasing deposition time. At 60 min of deposition, ILSS and flexural strength have shown maximum improvements of 35.0 and 26.6%, respectively, when compared to control specimen. After evaluating the effect of process parameters future scope of the work involves the optimization of parameters for EPD of G-COOH. Fractographic analysis of the fractured samples was performed using scanning electron microscope (SEM) to apprehend prominent failure mechanisms. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48925.     

Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers

The effects of bucky paper interleaves made from carbon nanofibers on interlaminar shear properties of carbon fiber reinforced composites (CFRPs) are studied. The study includes fabrication of bucky papers, resin impregnation by different techniques, i.e., soaking, hot-compression and vacuum filtration, followed by β-stage curing and the integration with carbon fiber prepregs to produce CFRP composites with bucky paper interleaves. The vacuum infiltration technique results in the best quality of polymer impregnation through bucky papers. Remarkable 31% and 104% improvements in interlaminar shear strength and mode-II shear interlaminar fracture toughness of the multiscale composites, respectively, are achieved with the incorporation of interleaves at failure-prone locations. The pertinent mechanisms responsible for the ameliorating effects of interleaves include improved interfacial adhesion and matrix shear strength for the interlaminar strengthening and crack-tip bridging and meandering for the toughening. The present technique can be used to incorporate carbon nanotubes (CNTs) or carbon nanofibers (CNFs) of high contents to strengthen/toughen at selective locations in FRP composites, which has not been possible previously because of the high viscosity caused by randomly-oriented CNTs/CNFs in a polymer resin.     

PAN基高模碳纤维阳极氧化的表面处理

采用阳极氧化法对PAN基高模碳纤维进行连续表面处理,重点研究了氧化电流密度对碳纤维宏观力学性能、表面形貌、表面酸性官能团以及碳纤维增强树脂基复合材料(CFRP)层间剪切强度(ILSS)的影响。结果表明,电流密度对纤维力学性能、表面形貌影响不大;氧化后纤维表面总的酸性官能团显著提高,最大增幅达13倍左右;适当的处理条件可使CFRP的ILSS从28.4 MPa提高到80 MPa以上。     

CNT基木塑复合材料的力学性能、电磁屏蔽性能

采用碳纤维(CF)和碳纳米管(CNT)通过模压工艺制备出具有电磁屏蔽功能的丙烯酸酯木塑复合材料。借助材料试验机、动态热机械分析仪、微欧计和电磁屏蔽测量仪等详细研究CNT质量分数对丙烯酸酯木塑复合材料弯曲性能、动态力学性能、电阻率和电磁屏蔽效能的影响。结果表明,添加质量分数为2%的CNT,使得复合材料的弯曲强度和弯曲弹性模量分别增加了10%和16%。复合材料的储能模量也在CNT质量分数为2%时达到最大值,之后储能模量随着CNT的增加而逐渐下降,损耗因子在CNT质量分数多于2%时也逐渐增加。复合材料的吸水率和导电性能随着CNT含量的增加而增加。同时复合材料的电磁屏蔽效能也随着CNT含量增加而递增。在30~1 500 MHz范围内,电磁屏蔽效能从27 d B增加到40 d B。结果证明,当CNT质量分数在2%时,丙烯酸酯木塑复合材料具有较佳的力学性能和较好的电磁屏蔽效能(30 d B),能满足商业要求。     

Nanoscale toughening of carbon fiber‐reinforced epoxy composites through different surface treatments

Interests in improving poor interfacial adhesion in carbon fiber‐reinforced polymer (CFRP) composites has always been a hotspot. In this work, four physicochemical surface treatments for enhancing fiber/matrix adhesion are conducted on carbon fibers (CFs) including acid oxidation, sizing coating, silane coupling, and graphene oxide (GO) deposition. The surface characteristics of CFs are investigated by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, scanning electron microscopy, interfacial shear strength, and interlaminar shear strength. The results showed that GO deposition can remarkably promote fiber/matrix bonding due to improved surface reactivity and irregularity. In comparison, epoxy sizing and acid oxidation afford enhancement of IFSS owing to effective molecular chemical contact and interlocking forces between the fiber and the matrix. Besides, limited covalent bonds between silane coupling and epoxy matrix cannot make up for the negative effects of excessive smoothness of modified CFs, endowing them inferior mechanical properties. Based on these results, three micro‐strengthening mechanisms are proposed to broadly categorize the interphase micro‐configuration of CFRP composite, namely, “Etching” “Coating”, and “Grafting” modifications, demonstrating that proper treatments should be chosen for combining optimum interfacial properties in CFRP composites. POLYM. ENG. SCI., 59:625–632, 2019. © 2018 Society of Plastics Engineers     

Mechanical, thermal and ablative properties of interply continuous/spun hybrid carbon composites

The mechanical and thermal properties of interply hybrid carbon fiber (continuous and spun fabric)/phenolic composite materials have been studied. Hybrid carbon/phenolic composites (hybrid CP) with continuous carbon fabric of high tensile, flexural strength and spun carbon fabric of better interlaminar shear strength and lower thermal conductivity are investigated in terms of mechanical properties as well as thermal properties.Through hybridization, tensile strength and modulus of spun type carbon fabric reinforced phenolic composites (spun CP) increased by approximately 28% and 20%, respectively. Hybrid CP also exhibits better interlaminar shear strength than continuous carbon fabric/phenolic composites (continuous CP).The in-plane thermal conductivity of hybrid CP is 4-8% lower than that of continuous CP. As continuous filament type carbon fiber volume fraction increases, the transversal thermal conductivity of hybrid CP decreases.The erosion rate and insulation index were examined using torch test. Spun CP has a higher insulation index than continuous CP and hybrid CP over the entire temperature range. Hybrid CP with higher content of spun fabric exhibits higher insulation index as well as lower erosion rate.     

Melt mixing of carbon fibers and carbon nanotubes incorporated polyurethanes

Polyurethane composites filled with carbon fibers (CF) and carbon nanotubes (CNT) were prepared by mixing and injection molding, and its mechanical as well as their thermal properties were investigated. Dynamic mechanical analysis (DMA), thermogravimetry analysis (TGA), and thermal conductivity tests were done, and the properties were evaluated as a function of the filler concentration. The storage modulus of the composites increased with fillers concentration, which also mean the increase of the stiffness, suggest a good adhesion between the polyurethane matrix and the fillers. Addition of more CF and CNT to the composites broadened and lowered the peak of tan δ specifies that the polyurethane composite became more elastic because there is a good adhesion between the fillers and the matrix. The addition of carbon fillers improves the thermal stability of the polyurethane. The inclusions of CNT show a better thermal stability when compared with CF. The addition of carbon fillers also increased the thermal conductivity of the polyurethane composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

电子束辐射接枝对PAN基碳纤维的表面改性

采用电子束加速器辐射接枝方法对聚丙烯腈(PAN)基碳纤维进行表面改性,研究了接枝单体种类对接枝率及其环氧树脂基复合材料力学性能的影响,分析了辐射接枝前后PAN基碳纤维的表面形貌与化学结构以及其复合材料界面断口的形貌变化。结果表明:电子束辐射接枝改性的PAN基碳纤维表面粗糙度增加,表面活性官能团增多,与树脂的机械锲合作用增强,其树脂基复合材料断口表而较为平整;乙二胺/水溶液体系是辐射接枝改性的理想溶液,在200 kGy的电子束辐射下,PAN基碳纤维表面的接枝率为6.66%,复合材料的层间剪切强度提高了45.1%。     

A sandwich structure graphite block with excellent thermal and mechanical properties reinforced by in-situ grown carbon nanotubes

A graphite block derived from natural graphite flakes (NGF) has high thermal conductivity (TC) but poor mechanical properties. An effort to overcome this shortcoming was made by introducing carbon nanotubes (CNTs) onto the NGF surface by chemical vapor deposition (CVD). A block with a CNT–NGF–CNT sandwich structure was then prepared by hot-pressing at 2973 K. The new structure improved bend strength (increasing 52.2%) of the block, while maintaining the TC in the direction perpendicular to hot-pressing.