液相合成甲醇催化剂活性的研究

The effects of reduction procedure, reaction temperature and composition of feed gas on the activity of a CuO-ZnO-Al2O3 catalyst for liquid phase methanol synthesis were studied. An optimized procedure different from conventional ones was developed to obtain higher activity and better stability of the catalyst. Both CO and CO2 in the feed gas were found to be necessary to maintain the activity of catalyst in the synthesis process. Reaction temperature was limited up to 523K, otherwise the catalyst will be deactivated rapidly. Experimental results show that the catalyst deactivation is caused by sintering and fouling, and the effects of CO and CO2 on the catalyst activity are also investigated. The experimental results indicate that the formation of water in the methanol synthesis is negligible when the feed gas contains both CO and CO2. The mechanism for liquid-phase methanol synthesis was discussed and it differed slightly from that for gas-phase synthesis.     

Cobalt Schiff base complexes: Synthesis characterization and catalytic application in Suzuki–Miyaura reaction

3-Methoxysalicylaldehyde was condensed with the amines 4-aminoacetophenone and 2-amino-5-bromopyridine to obtain Schiff base ligands, 1 and 2, which were coordinated to cobalt salts as complex 1 and complex 2, respectively. The synthesized ligands and complexes were characterized by spectroscopic (FT-IR, UV-Vis, ¹H-NMR and mass spectrometry), thermal (TGA) and elemental analysis. The structures of the complexes were verified by evaluating their magnetic susceptibility and spectroscopic evidences. Synthesized complexes were studied for their catalytic activity in the Suzuki-Miyaura cross-coupling of aryl halides with phenylboronic acid. Optimized reaction yields 90% of the cyanobiphenyl for complex 1 and 91% for complex 2 with 0.1 mmol of catalyst loading thereby substantiating the C-C coupling efficiency of the synthesized complexes, 1 and 2.     

Reaction mechanism of methyl nitrite dissociation during co catalytic coupling to dimethyl oxalate: A density functional theory study

Dissociation of methyl nitrite is the first step during CO catalytic coupling to dimethyl oxalate followed by hydrogenation to ethyl glycol in a typical coal to liquid process. In this work, the first-principle calculations based on density functional theory were performed to explore the reaction mechanism for the non-catalytic dissociation of methyl nitrite in the gas phase and the catalytic dissociation of methyl nitrite on Pd(111) surface since palladium supported on alpha-alumina is the most effective catalyst for the coupling. For the non-catalytic case, the calculated results show that the CH_3O–NO bond will break with a bond energy of 1.91 eV, and the produced CH_3O radicals easily decompose to formaldehyde, while the further dissociation of formaldehyde in the gas phase is difficult due to the strong C–H bond. On the other hand, the catalytic dissociation of methyl nitrite on Pd(111) to the adsorbed CH_3O and NO takes place with a small energy barrier of 0.03 eV. The calculated activation energies along the proposed reaction pathways indicate that(i) at low coverage, a successive dehydrogenation of the adsorbed CH_3O to CO and H is favored while(ii) at high coverage, hydrogenation of CH_3O to methanol and carbonylation of CH_3O to methyl formate are more preferred. On the basis of the proposed reaction mechanism,two meaningful ways are proposed to suppress the dissociation of methyl nitrate during the CO catalytic coupling to dimethyl oxalate.     

WP/γ-Al2O3催化剂的制备、表征及加氢脱硫和加氢脱氮活性

Two series of WP/Al2O3 catalyst precursors with WP mass loading in the range 18.5%-37.1% were prepared using the impregnation method and mixing method, respectively, and the catalysts were then obtained by temperature-programmed reduction of supported tungsten phosphate (precursor of WP/Al2O3 catatlysts) in H2 at 650℃ for 4h. The catalysts were characterized by XRD, BET, TG/DTA, XPS and 31p MAS-NMR. The activities of these catalysts were tested in the hydrodenitrogenation (HDN) of pyridine and hydrodesulfurization (HDS) of thiophene at 340℃ and 3.0MPa. The results showed that owing to the stronger interaction of the support with the active species, the precursor of WP/Al2O3 catalyst was more difficultly phosphided and a greater amount of W species was in a high valence state W6 on the surface of the catalyst prepared by the impregnation method than that by the mixing method. 31p MAS-NMR results indicated that 31p shift from 85% H3PO4 of 2.55 × 10-4 for WP and 2.57 × 10-4 for WP/γ-Al2O3 catalysts prepared by mixing method. Such WP/Al2O3 catalysts showed higher HDN activities and lower HDS activities than those prepared by the impregnation method under the same loading of WP.WP/γ-Al2O3 catalysts with weak interaction between support and active species were favorable for HDN reaction while the WP/γ-Al2O3 catalysts with strong interaction were favorable for HDS reaction.     

对苯二甲酸-丁二醇催化单酯化反应动力学(英文)

The chemical kinetics of the monoesterification between terephthalic acid (TPA) and 1,4-butanediol (BDO) catalyzed by a metallo-organic compound was studied using the initial rate method. The experiments were carried out in the temperature range of 463-483 K, and butylhydroxyoxo-stannane (BuSnOOH) and tetrabutyl titanate [Ti(OBu)4] were used as catalyst respectively. The initial rates of the reaction catalyzed by BuSnOOH or Ti(OBu)4 were measured at a series of initial concentrations of BDO (or TPA) with the concentration of TPA (or BDO) kept constant. The reaction orders of reagents were determined by the initial rate method. The results indicate that the reaction order for TPA is related with the species of catalyst and it is 2 and 0.7 for BuSnOOH and Ti(OBu)4 respectively. However, the order for BDO is the same 0.9 for the two catalysts. Furthermore, the effects of temperature and catalyst concentration are investigated, and the activation energies and the reaction rate constants for the two catalysts were deter-mined.     

纸浆黑液和钙混合催化剂进行高变质无烟煤水蒸气气化的研究

The catalytic effects of single and mixed catalysts, i.e. single 3%Ca and 5%Na-BL（black liquor） catalysts and mixed 3%Ca＋5%Na-BL catalyst, on carbon conversion, gasification reaction rate constant and activation energy, relative amount of harmful pollutant like sulphur containing gases have been investigated by thermogravimetry in steam gasification under temperature 750℃ to 950℃ at ambient pressure for three high-metarnorphous anthracites （Longyan, Fenghai and Youxia coals in Fujian Province）. The mixed catalyst of 3%Ca＋5%Na-BL increases greatly the carbon conversion and gasification rate constant by accelerating the gasification reaction C＋H2O→CO＋H2 due to presence of alkali surfacecompounds [COM], [CO2M] and exchanged calcium phenolate and calcium carboxylate （-COO）2. By adding CaCO3 into BL catalyst in gasification, in addition to improving the catalyst function and enhancing the carbon conversion, the effective desulphurization is also achieved, but the better operating temperature should be below 900℃. The homogenous and shrinking core models can be successfully employed to correlate the relations between the conversion and the gasification .time .and to estimate the reaction rate constant, The reaction acUvaUon energy and pre-exponential factor are estimated and the activation energy for mixed catalyst is in a range of 98.72-166.92 kJ·mol^-1, much less than 177.50-196.46 kJ·mol^-1 for non-catalytic steam gasification for three experimental coals.     

一种新γ相氧化铝负载的铁铝双金属催化剂用于反向水煤气转化反应(英文)

In reverse water gas shift (RWGS) reaction CO₂ is converted to CO which in turn can be used to produce beneficial chemicals such as methanol. In the present study, Mo/Al₂O₃, Fe/Al₂O₃ and Fe-Mo/Al₂O₃ catalysts were synthesised using impregnation method. The structures of catalysts were studied using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) method, inductively coupled plasma atomic emission spectrometer (ICP-AES), temperature programmed reduction (H₂-TPR), CO chemisorption, energy dispersive X-ray (EDX) and scanning electron microscopy (SEM) techniques. Kinetic properties of all catalysts were investigated in a batch reactor for RWGS reaction. The results indicated that Mo existence in structure of Fe-Mo/Al₂O₃ catalyst enhances its activity as compared to Fe/Al₂O₃. This enhancement is probably due to better Fe dispersion and smaller particle size of Fe species. Stability test of Fe-Mo/Al₂O₃ catalyst was carried out in a fixed bed reactor and a high CO yield for 60 h of time on stream was demonstrated. Fe₂(MoO₄)₃ phase was found in the structures of fresh and used catalysts. TPR results also indicate that Fe₂(MoO₄)₃ phase has low reducibility, therefore the Fe₂(MoO₄)₃ phase signifificantly inhibits the reduction of the remaining Fe oxides in the catalyst, resulted in high stability of Fe-Mo/Al₂O₃ catalyst. Overall, this study introduces Fe-Mo/Al₂O₃ as a novel catalyst with high CO yield, almost no by-products and fairly stable for RWGS reaction.     

Catalytic kinetics of dimethyl ether one-step synthesis over CeO_2–CaO–Pd/HZSM-5 catalyst in sulfur-containing syngas process

CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of CeO_2–CaO–Pd/HZSM-5 was investigated to ensure that the kinetics experimental results were not significantly influenced by induction period and catalytic deactivation. A large number of kinetic data points(40 sets) were obtained over a range of temperature(240–300 °C), pressure(3–4 MPa), gas hourly space velocity(GHSV)(2000–3000 L·kg~(-1)·h~(-1)) and H_2/CO mole ratio(2–3). Kinetic model for the methanol synthesis reaction and the dehydration of methanol were obtained separately according to reaction mechanism and Langmuir–Hinshelwood mechanism. Regression parameters were investigated by the method combining the simplex method and Runge–Kutta method. The model calculations were in appropriate accordance with the experimental data.     

An efficient green route for hexamethylene-1,6-diisocyanate synthesis by thermal decomposition of hexamethylene-1,6-dicarbamate over Co3O4/ZSM-5 catalyst:An indirect utilization of CO2

The utilization of CO2 as rawmaterial for chemical synthesis has the potential for substantial economic and green benefits. Thermal decomposition of hexamethylene-1,6-dicarbamate (HDC) is a promising approach for indirect utilization of CO2 to produce hexamethylene-1,6-diisocyanate (HDI). In this work, a green route was developed for the synthesis of HDI by thermal decomposition of HDC over Co3O4/ZSM-5 catalyst, using chlorobenzene as lowboiling point solvent. Different metal oxide supported catalysts were prepared by incipientwetness impregnation (IWI), PEG-additive (PEG) and deposition precipitation with ammonia evaporation (DP) methods. Their catalytic performances for the thermal decomposition of HDC were tested. The catalyst screening results showed that Co3O4/ZSM-525 catalysts prepared by different methods showed different performances in the order of Co3O4/ZSM-525(PEG) N Co3O4/ZSM-525(IWI) N Co3O4/ZSM-525(DP). The physicochemical properties of Co3O4/ZSM- 525 catalyst were characterized by XRD, FTIR, N2 adsorption-desorption measurements, NH3-TPD and XPS. The superior catalytic performance of Co3O4/ZSM-525(PEG) catalyst was attributed to its relative surface content of Co3+, surface lattice oxygen content and total acidity. Under the optimized reaction conditions: 6.5% HDC concentration in chlorobenzene, 1 wt% Co3O4/ZSM-525(PEG) catalyst, 250 °C temperature, 2.5 h time, 800 ml·min?1 nitrogen flow rate and 1.0 MPa pressure, the HDC conversion and HDI yield could reach 100% and 92.8% respectively. The Co3O4/ZSM-525(PEG) catalyst could be facilely separated from the reaction mixture, and reused without degradation in catalytic performance. Furthermore, a possible reaction mechanism was proposed based on the physicochemical properties of the Co3O4/ZSM-525 catalysts.     

福建无烟煤CO2气化过程纸浆黑液和钙混合物的催化活性

CO2 gasification of Fuijian high-metamorphous anthracite with black liquor （BL） and/or mixture of BL and calcium stuff （BL＋Ca） as catalyst was studied by using a thermogravimetry under 750-950℃ at ambient pressure. When the coal was impregnated with an appropriate quantity of Ca and BL mixture, the catalytic activity of CO2 gasification was enhanced obviously. With a loading of 8%Na-BL＋2%Ca, the carbon conversion of three coal samples tested reaches up to 92.9%-99.3% at 950℃ within 30min. The continuous formation of alkali surface compounds such as （[-COM], [-CO2M]） and the presence of exchanged Ca, such as calcium phenolate and calcium carboxylates （COO）2Ca, contribute to the increase in catalytic efficiency, and using BL＋Ca is more efficient than that adding BL only, The homogeneous model and shrinking-core model were applied to correlate the data of conversion with time and to estimate the reaction rate constants under different temperature. The corresponding reaction activation energy （Ea） and pre-exponential factor of three anthracites were estimated. It is found that Ea is in the range from 73.6 to 121.4kJ·mol^-1 in the case of BL＋Ca, and 74.3 to 104.2kJ·mol^-1 when only BL was used as the catalyst, both of which are much less than that from 143.5 to 181.4kJ·mol^-1 if no catalyst used. It is clearly demonstrated that both of BL＋Ca mixture and BL could be the source of cheap and effective catalyst for coal gasification.     

25℃下Na+,K+,Mg2+//Cl-,NO-3-H2O五元体系液固相平衡

The solubilities of the quinary system Na + ,K + ,Mg 2+ //Cl ,NO 3 -H2O and its two quaternary subsystems, Na + ,K + ,Mg 2+ //NO 3 -H2O and K + ,Mg 2+ //Cl ,NO 3 -H2O,were studied by isothermal method at 25°C and their phase diagrams were plotted.In the equilibrium phase diagram of quaternary system Na + ,K + ,Mg 2+ //NO 3 -H2O, there are one invariant point,three univariant curves and three regions of crystallization with one salt:NaNO3, KNO3 and Mg(NO3)2·6H2O.In the equilibrium phase diagram of quaternary system K + ,Mg 2+ //Cl ,NO 3 -H2O,there are three invariant points,seven univariant curves and five regions of crystallization with one salt:KNO3,KCl, Mg(NO3)2·6H2O,MgCl2·6H2O and KCl·MgCl2·6H2O.In the equilibrium phase diagram of the quinary system Na + , K + ,Mg 2+ //Cl ,NO 3 -H2O,there are four invariant points,and seven regions of crystallization with one salt:NaCl, KCl,NaNO3,KCl·MgCl2·6H2O,KNO3,MgCl2·6H2O and Mg(NO3)2·6H2O.     

重组尿苷磷酸化酶的诱导及其在嘧啶核苷生物合成中的应用

Recombinant Escherichia coli pUDP,which overexpressed uridine phosphorylase(UPase),was constructed.0.5 mmol·L 1lactose had a similar induction effect as the commonly used inducer IPTG during 2.5-5.5 h of cell growth.The lactose-induced UPase was stable at 50°C.Wet cells of pUDP was used as catalyst to biosynthesize 5-fluorouridine from 30 mmol·L 1uridine and 5-fluorouracil in phosphate buffer(pH 7.0)catalyzed at 50°C for 1.5 h and the yield of 5-fluorouridine was higher than 68%.Under the optimum reaction conditions for production of 5-fluorouridine,5-methyluridine and azauridine were synthesized from uridine by pUDP,the yield was 61.7%and 47.2%respectively.Deoxynucleosides were also synthesized by pUDP,but the yield was only about 20%.     

纯三水铝石在NaOH溶液中溶出过程最可机函数和动力学参数(英文)

Determination of probable mechanism function and kinetic parameters is important to hydrometallurgical kinetics.In this work,the most probable mechanism function and kinetic parameters of gibbsite dissolution in NaOH solution are studied.The sample,the mixture of synthetic gibbsite and sodium hydroxide solution,was scanned in high-pressure differential scanning calorimetry(DSC) equipment with the heating rate of 10 K·min-1. Integral equation and differential equation of non-isothermal kinetics were solved to fit the data related to DSC curve.According to the calculation results,the most probable mechanism function for pure synthetic gibbsite dissolution in sodium hydroxide solution is presented based on the optimum procedure in the database of the mechanism function.The apparent activation energy obtained is(75±1) kJ·mol-1,the frequency factor is 10 8±1mol·s-1,and the reaction is a second order reaction.     

用自热式高温好氧消化工艺预处理肺炎杆菌生物降解动力学研究(英文)

Biodegradation parameters and kinetic characteristics for pre-treating waste strains of Klebsiella pneu-moniae were studied in laboratory scale with an insulated reactor by an innovative technique,autothermal thermo-philic aerobic digestion(ATAD) . Based on an Arrhenius-type equation,an empirical model was developed to corre-late the removal of total suspended solid(TSS) with the initial TSS concentration,influent reaction temperature,aeration rate and stirring rate. The reaction temperatures of the ATAD system could be raised from the ambient temperatures of 25 °C to a maximum temperature of 65 °C. The exponentials for the initial TSS concentration,aeration rate and stirring rate were 1.579,-0.8175 and-0.6549,respectively,and the apparent activation energy was 6.8774 kJ·mol-1. The correlation coefficient for the pre-exponential factor was 0.9223. The TSS removal effi-ciency predicted by the model was validated with an actual test,showing a maximum relative deviation of 10.79%. The new model has a good practicability.     

硼氢化物催化水解制氢作为燃料电池氢源(英文)

Borohydrides present interesting options for the electrochemical power generation acting either as hydrogen source or anodic fuel for direct borohydride fuel cells(DBFC).In this work,Mg-Ni composite synthesized by mechanically alloying method,used as the catalyst for the hydrolysis of borohydride,has been investigated.Co-doping treatment has been carried out for the purpose of improving the hydrolysis rate further.The as-prepared and Co-doped Mg-Ni composites with low cost showed high catalytic activity to the hydrolysis of borohydride for hydrogen generation.After Co-doping,the hydrogen generation rate was around 280 ml·g-1·min-1.Borohydride would be a promising hydrogen source for fuel cells.     

硫酸铁改性颗粒活性氧化铝除氟的等温线研究

The adsorption equilibrium of a fluoride solution on 1-2 mm granular activated alumina modified by Fe2(SO4)3 solution was investigated. The experiments were conducted using a wide range of initial fluoride concentrations (0.5 to 180 mg•L1 at pH ~7.0) and an adsorbent dose of 1.0 g•L1. The application of Langmuir and Freundlich adsorption isotherm models (linear and nonlinear forms) generally showed that a single Langmuir or Freundlich equation cannot fit the entire concentration gap. Experimental data on low equilibrium concentrations (0.1 to 5.0 mg•L1) was in line with both Langmuir and Freundlich isotherm models, whereas that of high equilibrium concentrations (5.0 to 150 mg•L1) was more in line with the Freundlich isotherm model. A new Langmuir- Freundlich function was used for the entire concentration gap, as well as for low and high concentrations.     

L-半胱氨酸浓度对氧化还原电位和生物产氢过程的影响(英文)

The effects of L-cysteine concentration on biohydrogen production by Enterobacterium Bacterium M580 were investigated in batch cultivation.The experimental results showed that L-cysteine could enhance the cell growth,hydrogen production rate and hydrogen yield when its concentration was less than 500 mg·L-1,while it had negative effects when its concentration was higher than 500 mg·L-1.The hydrogen production was the highest 1.29 mol·mol-1(H2/glucose) when 300 mg·L-1L-cysteine was added into the culture,and the yield was 9.4% higher than that in the control.The oxidation-reduction potential(ORP) ,which was influenced by L-cysteine,also affected hydrogen production.The ORP values were in the range-300 mV to-150 mV when the L-cysteine concentration was higher than 500 mg·L-1.Although the ORP in this range was favorable for hydrogen production,it was not suitable for the biomass growth.Hence,less hydrogen was produced.When the L-cysteine concentration was lower than 500 mg·L-1,the ORP was more suitable for both biomass growth and hydrogen production.In addition,at least 91%glucose was consumed when L-cysteine was added to the culture media,compared to the 97.37% consumption without L-cysteine added.     

利用两级UASB消化处理实现木薯燃料乙醇的水循环型生产

Considering limited success in target-hitting discharge from alcohol industry, our attention was directed toward a recycling use of distillery spentwash (DS) in cassava bioethanol production by using a two-stage up-flow anaerobic sludge blanket bioremediation (TS-UASBB). With the TS-UASBB, , COD, N and P in the effluent from the DS degraded significantly and their concentrations were kept at 0.2 g•L1, 2.0 g•L1, 1.0 g•L1 and 15 mg•L1, respectively, in 13 batch processes for water-recycled ethanol fermentation. With the effluent used directly as dilution water, no heat-resistant bacteria were found alive. The thirteen-batch ethanol production individually achieved 10% after 48 h fermentation. The starch utilization ratio and total sugar consumption were 90% and 99.5%, respectively. The novel water-recycled bioethanol production process with ethanol fermentation and TS-UASBB has a considerable potential in other starchy and cellulosic ethanol production.     

表面活性素集成生产过程(Ⅲ)吸附柱的模型

The study is focused on modeling of separation process and optimization.An adsorption separation process is simulated.The surfactin production process by Bacillus subtilis ATCC 21332 followed by surfactin adsorption in a fixed-bed column packed with commercial active carbon is studied in laboratory.The adsorption column achieves high surfactin recovery(94%)by up-flow methanol elution at 25°C.The adsorption column is simulated with a complex one-dimensional plug flow dispersion model coupled with nonlinear adsorption equilibrium,based on the assumption that the adsorption of surfactin is monomolecular layer and no micelle is formed.The molecular diffusion coefficient of surfactin in water solution with electric neutrality is estimated to be 0.428×10 -5 cm 2 ·s -1 by molecular dynamics simulation.The model developed can describe the complex interplay of adsorption kinetics,fluid dynamics,and mass-transfer phenomena based on the assumption of no radial temperature and concentration gradients,and is of adequate precision.The work involved in this paper is valuable for the optimization of the production process of surfactin.     

水热合成二硫化钼纳米片及在锂离子电池中的应用(英文)

Molybdenum disulfide nanoflakes were synthesized by a simple hydrothermal process using sodium molybdate and thiourea as reactants at a relatively low temperature. X-ray diffraction(XRD) and transmission elec-tron microscopy(TEM) indicate that the samples have the structure of 2H-MoS2 and the morphology of nanoflakes with the average thickness around 5-10 nm. The results of electrochemical properties indicate that the morphology and size of MoS2 particles have effects on their capacity when they are used as the anode for lithium ion battery. The as-prepared MoS2 samples have high reversible discharge capacity up to 994.6 mA·h·g-1 for the MoS2-1 elec-trode and 930.1 mA·h·g-1 for the MoS2-2 electrode and show excellent cycling performances. The MoS2-1 electrode has a better cycling stability than the MoS2-2 electrode due to their difference in the uniformity of the samples.