Moisture profiles of wheat noodles containing hydroxypropylated tapioca starch

Wheat noodles were prepared using flour to which hydroxypropylated tapioca starch was added, and the effect of this addition on the moisture distribution within the noodles during cooking was examined using a digital image processing technique. The addition of the modified starch slightly increased the moisture content and narrowed the flat distribution near the noodle surface. The distribution features reflected the changes in the water absorption behaviour caused by the properties of the modified starch and the reduction in the gluten content. Addition of the modified starch lowered Young's modulus and the energy for 99% strain of the noodles in the texture analysis to, at maximum 35% and 65%, and decreased the breakability of the noodles. These changes in the moisture distribution and textural properties have been ascribed to changes in both the state of the starch granules near the surface and the structure of the gluten network.     

Low-Temperature Processing of PZT Thick Film by Seeding and High-Energy Ball Milling and Studies on Electrical Properties

Lead zirconate titanate thick film with molecular formula PbZr_0.52Ti_0.42O₃ (PZT) was prepared by a modified conventional sol–gel method through seeding and high-energy ball milling, resulting in perovskite phase formation at lower temperatures. The ball-milling time was optimized by keeping the seed particle loading (5 wt.%) constant in the sol–gel solution. This methodology helped in reduction of the crystalline phase formation temperature to 300°C, which is much lower than that reported in the literature (450°C). The well-established perovskite phase was confirmed by x-ray diffraction (XRD) analysis. Scanning electron microscopy (SEM) of PZT films revealed uniform and crystalline microstructure. Film prepared by this methodology showed higher spontaneous polarization (2.22 μC/cm²), higher capacitance (1.17 nF), and low leakage current density (18 μA/cm²). The results obtained from ferroelectric characterization showed a strong correlation with the XRD and SEM results.     

Effect of Cooling Rate on Microstructure and Mechanical Properties of Eutectoid Steel Under Cyclic Heat Treatment

A systematic study has been carried out to ascertain the effect of cooling rate on structure and mechanical properties of eutectoid steel subjected to a novel incomplete austenitization-based cyclic heat treatment process up to 4 cycles. Each cycle consists of a short-duration holding (6 min) at 775 °C (above A₁) followed by cooling at different rates (furnace cooling, forced air cooling and ice-brine quenching). Microstructure and properties are found to be strongly dependent on cooling rate. In pearlitic transformation regime, lamellar disintegration completes in 61 h and 48 min for cyclic furnace cooling. This leads to a spheroidized structure possessing a lower hardness and strength than that obtained in as-received annealed condition. On contrary, lamellar disintegration does not occur for cyclic forced air cooling with high air flow rate (78 m³ h^?1). Rather, a novel microstructure consisting of submicroscopic cementite particles in a ‘interweaved pearlite’ matrix is developed after 4 cycles. This provides an enhancement in hardness (395 HV), yield strength (473 MPa) and UTS (830 MPa) along with retention of a reasonable ductility (%Elongation = 19) as compared to as-received annealed condition (hardness = 222 HV, YS = 358 MPa, UTS = 740 MPa, %Elongation = 21).     

Identification and characterization of metabolic properties of bacterial populations recovered from arsenic contaminated ground water of North East India (Assam)

Diversity of culturable bacterial populations within the Arsenic (As) contaminated groundwater of North Eastern state (Assam) of India is studied. From nine As contaminated samples 89 bacterial strains are isolated. 16S rRNA gene sequence analysis reveals predominance of Brevundimonas (35%) and Acidovorax (23%) along with Acinetobacter (10%), Pseudomonas (9%) and relatively less abundant (<5%) Undibacterium, Herbaspirillum, Rhodococcus, Staphylococcus, Bosea, Bacillus, Ralstonia, Caulobacter and Rhizobiales members. High As(III) resistance (MTC 10–50 mM) is observed for the isolates obtained from As(III) enrichment, particularly for 3 isolates of genus Brevundimonas   (MTC 50 mM). In contrast, high resistance to As(V) (MTC as high as 550 mM) is present as a ubiquitous property, irrespective of isolates' enrichment condition. Bacterial genera affiliated to other groups showed relatively lower degree of As resistance [MTCs of 15–20 mM As(III) and 250–350 mM As(V)]. As(V) reductase activity is detected in strains with high As(V) as well as As(III) resistance. A strong correlation could be established among isolates capable of reductase activity and siderophore production as well as As(III) tolerance. A large number of isolates (nearly 50%) is capable of anaerobic respiration using alternate inorganic electron acceptors [As(V), Se(VI), Fe(III), ₃NO²⁻${{\text{NO}}_3}^{2\mathrm{-}}$, ₄SO²⁻${{\text{SO}}_4}^{2\mathrm{-}}$, S₂O₃²⁻${{\text{S}}_2{\text{O}}_3}^{2\mathrm{-}}$]. Ability to utilize different carbon sources ranging from C2–C6 compounds along with some complex sugars is also observed. Particularly, a number of strains is found to possess ability to grow chemolithotrophically using As(III) as the electron donor. The study reports for the first time the identity and metabolic abilities of bacteria in As contaminated ground water of North East India, useful to elucidate the microbial role in influencing mobilization of As in the region.     

Preparation of dibasic acid-containing soy phospholipids by chemical and enzyme-catalyzed transesterification and evaluation of their surface-active properties

The preparation of dibasic acid-containing soy phospholipid was made by transesterification reaction with alkyl ester of diabasic acid with both lipase and alkoxide as a catalyst. The extent of incorporation of a dibasic acid varied with the molecular size of the dibasic acid. The extent of incorporation in soy phospholipids was 4–13% in the case of adipic acid and 9–20% in the case of sebacic acid. The surface-active properties of these modified soy phospholipids were examined and were found to be different from those of the original (unmodified) soy phospholipid. The interfacial properties such as critical micelle concentration (CMC), γ_CMC, surface excess concentration Γ_max, and minimum area per molecule (Å), and thermodynamic parameters such as standard free energy of micellization, were found to depend on the hydrophobic part of the dibasic acids.     

Influence of crystal morphology of 1H-1,2,4-triazole on anhydrous state proton conductivity of sulfonated bisphenol A polyetherimide based polyelectrolytes

In this study, new anhydrous proton conducting polyelectrolytes were prepared based on sulfonated bisphenol A polyetherimide (SPEI) and 1H-1,2,4-triazole (Taz) as a solid state proton solvent. The effect of degree of sulfonation and triazole concentration on size, shape and dispersibility (crystal morphology) of triazole crystals in sulfonated polyetherimide were examined and correlated with proton conduction. At a constant triazole weight percent, increased sulfonation level caused enhanced nucleation density, reduction of crystallite size and their uniform distribution throughout SPEI matrix. The decrease in size was responsible for the depression of triazole melting temperature. Proton conduction through structure diffusion occurred effectively within the smaller size crystals due to the improved molecular mobility.     

Thermal and electronic properties of Bi1 − xSbx alloys

Polycrystalline Bi_1 ? xSb_x (x = 0.10, 0.12 and 0.15) semiconducting alloys were synthesized by mechanical alloying in order to achieve homogeneous thermoelectric materials with improved mechanical strength. The homogeneity of the powder samples were repeatedly checked by X-ray diffraction and scanning electron microscopy to standardize the milling conditions. The best possible homogenized material was developed with the milling conditions of BPR 30:1, ball diameter 30 mm, 400 rpm and milling time of 15 h. The electrical resistivity, thermoelectric power and thermal conductivity were measured in the temperature range 300–500 K. It was found through these experiments that the composition with x = 0.12 behaved in a normal semiconducting way, whereas the other two compositions (x = 0.10 and 0.15) showed degenerate semiconductor behaviour. These features have been qualitatively explained from the band structure and interband scattering mechanisms.     

Membranoproliferative glomerulonephritis induced by portosystemic shunt surgery for non-cirrhotic portal hypertension

The liver and spleen both have important phagocytic functions and contain monocytes/macrophages which clear immune complexes. We describe here three patients who presented proteinuria and hematuria 7 to 13 years after portosystemic shunt surgery, which diverted portal venous blood to the systemic circulation. They had hematemesis and/or melena and underwent mesocaval shunt surgery and splenectomy in childhood because of non-cirrhotic portal hypertension with esophageal varices. Renal biopsy specimens revealed findings characteristic of membranoproliferative glomerulonephritis (MPGN) type I. Immunohistologically, these three cases were accompanied by a distinct IgA deposition along with a marked C3 deposition. The IgA observed in these three cases contained not only IgA1 but also IgA2, which is the predominant form of mucosal IgA. On the other hand, of 20 patients with idiopathic MPGN type I with IgA deposition (n = 20), only two were positive for IgA2, and the distribution was focal and segmental. Our study shows that MPGN type I may have developed secondary to portosystemic shunt. This secondary form of MPGN type I may be caused by a reduced clearance of immune complexes in the liver and their deposition in the glomerulus, since a portosystemic shunt routes portal venous blood from the intestinal tract directly to the systemic circulation.