共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
影响电子设备运行环境可靠性的因素由内因和外因组成,这些因素直接或间接地影响着电子设备的使用寿命并能导致一些事故的发生。介绍了目前国内带电清洗的现状和如何选择适宜的带电清洗技术,并分析了带电清洗技术的市场应用前景。 相似文献
12.
湿式氧化法脱硫过程副反应的形成及其影响 总被引:1,自引:0,他引:1
分析了湿式氧化法脱硫过程副反应形成的原因,除内因外,碱度、温度、压力、催化剂性能等均为外因;当脱硫过程形成的副盐达到一定浓度时,将对脱硫过程造成脱硫效率下降等不利影响。实践证明,可通过选用性能良好的脱硫剂等措施来降低脱硫过程的副反应。 相似文献
13.
研究载重轮胎胎面脱层故障的分析方法。造成载重轮胎胎面脱层故障的原因分为外因和内因。外因主要包括轮胎使用时的充气压力、负荷、车速和路面情况,内因主要包括轮胎产品设计和制造工艺。轮胎故障分析应从外因和内因两方面着手,进行轮胎的使用条件调查及轮胎解剖分析,从而正确判断胎面脱层轮胎的故障原因,为赔偿方确定及产品改进提供依据。 相似文献
14.
15.
油品计量不仅是企业内部自身经济核算的基础,又是对外购销的财务计算依据,是石油化工企业生产和经营管理的重要内容之一。但是,油品计量从生产到储运、销售等环节不可避免的会出现误差。分析了油罐静态计量系统的准确度影响因素,对干气制乙苯车间罐区的计量交接误差原因进行了探讨。所有影响计量交接准确性的因素都会产生微小的误差,因此就需要了解这些因素,有效的解决和制定控制措施,使整个测量过程的误差减至最小,进一步提高计量准确度。 相似文献
16.
分析影响聚氯乙烯(PVC)塑窗耐候性的内因和外因,指出内因是PVC分子结构中出现的不规则连接、不饱和双键、支链等,外因主要是环境因素,即光、热、氧产生的老化,以及湿度的影响,并从冲击改性剂、稳定剂、着色剂、紫外线吸收剂及抗氧剂的选择方面提出了防止PVC塑窗老化的措施。 相似文献
17.
18.
材料测试技术是人们在长期材料测试实践过程中的经验总结,它不仅具有具有系统的理论,还有很强的实用性,但目前教学中存在着理论与实验相脱节的问题,为了提高教学质量,本文分析了问题存在的原因并提出重视实验教学环节、利用综合性实验调动学生的学习积极性,在教学中精练理论,注重其在实践和实验中的应用,改革教学内容并及时补充测试软件应用方面的知识,利用现代化技术手段辅助理论教学等解决问题的途径。 相似文献
19.
The relationships among internal stress, lattice deformation, and the moduli of polymers, such as poly(ethylene terephthalate) (PET), polypropylene (PP), polyethylene (PE), polyacryonitrile (PAN), and poly(p-phenylene terephthalamide) (PPTA), have been studied systematically. Compared to small molecule crystals, polymer crystals have many more defects and their parameters of the crystal unit cells and the density of the crystalline region are easy to vary to a certain extent. During the processing, external stresses were put on the polymer fibers and polymer molecules were drastically deformed, which induced polymer crystallization and preferred orientation. After processing, there are many macromolecules frozen in the nonequilibrium status, which is the cause of internal stress. Heat treatment could give energy to the macromolecules to release the internal stress and to approach thermodynamic equilibrium. For polymer crystals, the higher the annealing temperature, the shorter the lengths of the unit cell axes, the more integral and regular the crystal lattice, and the smaller the unit cell volume. Crystalline modulus changes not only with different kinds of polymer materials, but also with measurement temperature and processing history. Polymer processing, mainly drawing, causes orientation and internal stress which causes lattice deformation and raises tensile modulus of polymer materials. 相似文献
20.
分析了硫酸法钛白生产中产生残余固相物的内部和外部因素。提出了控制反应温度,从消除产生残余固相物的内部因素入手来提高酸解率。 相似文献