Application of conducting poly(aniline‐co‐pyrrole) film to cholesterol biosensor

Cholesterol oxidase (ChOx) has been covalently immobilized onto poly(aniline‐co‐pyrrole), electrochemically deposited onto indium‐tin‐oxide (ITO) glass plates, using glutaraldehyde as a crosslinker. These poly (An‐co‐Py)/ChOx films have been characterized using UV–visible spectroscopy fourier transform infrared spectroscopy, scanning electron microscopy, and photometric and amperometric techniques, respectively. The poly(An‐co‐Py)/ChOx bioelectrodes have been utilized for cholesterol estimation in the range of 1–10 mM. The ChOx activity in poly(An‐co‐Py)/ChOx bioelectrode has been found to be the highest at pH 7.0 at 25°C. The sensitivity and stability of poly(An‐co‐Py)/ChOx bioelectrode have been experimentally determined as 93.35 μA/mM and 10 weeks at 4°C, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Semi‐specific biosensors for measuring BOD in dairy wastewater

BACKGROUND: Semi‐specific microbial biochemical oxygen demand (BOD) biosensors were constructed using living cells of Escherichia coli R17.1.3 (E. coli) and Raoultella terrigena P74.3 (R. terrigena) immobilized in agarose gel matrix. The research involved comparison with the Pseudomonas fluorescens P75 (P. fluorescens) biosensor that had no specificity in decomposing lactose and milk derivates. The constructed BOD biosensors were calibrated with OECD synthetic wastewater and tested with different wastewater samples. RESULTS: The linear range of the calibration curve was 5–200 mg L^?1 BOD₇ for R. terrigena and P. fluorescens based biosensors and 150 mg L^?1 BOD₇ for the E. coli based biosensor. Service life was 60 days for E. coli and P. fluorescens based biosensors and 40 days for R. terrigena based biosensors. BOD values for dairy industry wastewater obtained with current semi‐specific biosensors considerably overestimate BOD₇, while universal biosensors underestimate BOD₇ obtained by the conventional 7‐day BOD test. CONCLUSION: In spite of extensive overestimation of BOD₇ the semi‐specific biosensors enabled better estimation of BOD in dairy industry wastewater than a reference P. fluorescens biosensor. The best result, in terms of service life, stability, sensitivity and reproducibility was accomplished with semi‐specific E.coli biosensor. Copyright © 2010 Society of Chemical Industry     

Polypyrrole–multiwalled carbon nanotubes composites as immobilizing matrices of ascorbate oxidase for the facile fabrication of an amperometric vitamin C biosensor

An amperometric vitamin C biosensor was facilely fabricated by the immobilization of ascorbate oxidase (AO) on polypyrrole (PPy)–multiwalled carbon nanotubes (MWCNTs) composites with a one‐step electrodeposition technique in a 0.05M phosphate buffer solution (pH 6.5). The cyclic voltammetry, IR spectral analysis, electrochemical impedance spectroscopy, and scanning electron microscopy measurements indicated that AO was successfully immobilized on the PPy–MWCNT composites. The optimization of the biosensor parameters, including the working potential, pH, and temperature, was investigated in detail. The proposed biosensor showed a linear range of 5 × 10^?5 to 2 × 10^?2 M with a detection limit of 0.3 μM, a sensitivity of 25.9 mA mM^?1 cm^?2, and a current response time less than 20 s under the optimized conditions. The apparent Michaelis–Menten constant together with the apparent activation energy indicated that the proposed biosensor exhibited a high bioaffinity and a good enzyme activity. In addition, the biosensor also showed good operational and storage stabilities. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thioether‐Functionalized Corn Oil Biosorbents for the Removal of Mercury and Silver Ions from Aqueous Solutions

Heavy‐metal contamination is one of the most important environmental problems faced in the world, particularly in developing countries. Metals such as silver and mercury from drinking water, food, and air sources can accumulate in living organisms and present significant health concerns. Meanwhile, the demand for these metals in many industries continues to increase. In the present study, thioether‐functionalized corn oil (TFCO) from a photoinitiated thiol‐ene synthesis was utilized to remove Ag⁺ and Hg²⁺ ions from an aqueous solution. An aqueous solution containing AgNO₃ and Hg[NO₃]₂ was prepared and contacted directly with TFCO. After vortex mixing for 60 s, the experiment ran for 351 min with the aqueous phase being periodically sampled for the analysis of metal ions (M ⁿ⁺). Results showed that 88.9% of Ag⁺ and 99.6% of Hg²⁺ ions were removed from the aqueous phase by the TFCO. Mass balances indicated that the total M ⁿ⁺ concentration in the oil phase was 13.890 g kg^?1 under the conditions studied. TFCO exhibited higher selectivity for removing Hg²⁺ than for Ag⁺ ions. Analysis of the adsorption kinetics showed that a pseudosecond‐order model may be used to determine the rate of Ag⁺ ion sorption by the oil phase. The presence of the Hg²⁺ ions interfered with the adsorption of Ag⁺ ions from the aqueous solution.     

Three‐component mixed matrix organic/inorganic hybrid membranes for pervaporation separation of ethanol–water mixture

Mixed matrix membranes (MMMs) were made by incorporating vinyltrimethoxysilane (VTMS)‐modified Silicalite‐1 zeolite nanoparticles (V‐Silicalite‐1 NPs) into fluorinated polybenzoxazine (F‐PBZ) modified polydimethylsiloxane (PDMS) polymer through in situ polymerization method. The membrane morphology, surface wettability, and pervaporation performance were systematically investigated. The addition of F‐PBZ into PDMS membranes resulted in substantially improved flux and marginal increase of separation factor, which is the result of higher free volume and higher hydrophobicity caused by the addition of F‐PBZ. The modification of Silicalite‐1 NPs improved the interfacial contact between zeolite crystals and polymer phase. The incorporation of hydrophobic V‐Silicalite‐1 zeolite NPs into the PDMS membranes led to much higher separation factor but reduced flux, which is the result of increased hydrophobicity and reduced free volume. The three‐component MMMs with V‐Silicalite‐1 zeolite NPs in the F‐PBZ fluorinated PDMS exhibited separation factor of 28.7 and flux of 0.207 kg m^?2 h^?1 for 5 wt % ethanol aqueous solution at 50 °C, while the pure PDMS membranes only had separation factor of 4.8 and flux of 0.088 kg m^?2 h^?1. The substantial increase of both flux and separation factor were attributed to the higher hydrophobicity and free volume caused by the incorporation of both hydrophobic zeolite crystals and F‐PBZ polymer into the PDMS membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44753.     

Synthesis of amine‐functionalized block copolymers for nanopollutant removal from water

Polyamines are rare in literature owing to increased reactivity, sensitivity to air and moisture, low stability, and processing difficulties. Here, we report the synthesis and characterization of highly processable polyamines and use them for the removal of dissolved metallic nanoparticles from water. Three amphiphilic block polyamines such as poly(N‐aminoethyl acrylamide‐b‐styrene), poly(N‐aminopropyl acrylamide‐b‐styrene), and poly(N‐aminoxylyl acrylamide‐b‐styrene) have been synthesized using atom transfer radical polymerization of ethyl acrylate and styrene followed by aminolysis of the acrylic block. The polymerization and properties of the polymers are studied using different physicochemical techniques. Surface morphology of films prepared from these block copolymers by dissolving in different solvents such as chloroform, tetrahydrofuran and N,N‐dimethylformamide, and drop‐casting polymers on a glass substrate show interesting porous films and spherical nanostructures. In addition, the amine‐functionalized block copolymers have been used for the removal of nanoparticles from water and show high extraction efficiency toward silver (Ag) and gold (Au) nanoparticles. All three amine‐functionalized block copolymers show higher extraction capacities (Q_e) toward Au NPs (50–109 mg g^?1) and Ag NPs (99–117 mg g^?1). Our approach allows us to make amine‐functionalized block copolymers which are stable in air and can be easily processed in nonpolar solvents. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40943.     

Immobilization of invertase onto dimer acid‐co‐alkyl polyamine

Invertase was immobilized onto the dimer acid‐co‐alkyl polyamine after activation with 1,2‐diamine ethane and 1,3‐diamine propane. The effects of pH, temperature, substrate concentration, and storage stability on free and immobilized invertase were investigated. Kinetic parameters were calculated as 18.2 mM for K_m and 6.43 × 10^?5 mol dm^?3 min^?1 for V_max of free enzyme and in the range of 23.8–35.3 mM for K_m and 7.97–11.71 × 10^?5 mol dm^?3 min^?1 for V_max of immobilized enzyme. After storage at 4°C for 1 month, the enzyme activities were 21.0 and 60.0–70.0% of the initial activity for free and immobilized enzyme, respectively. The optimum pH values for free and immobilized enzymes were determined as 4.5. The optimum temperatures for free and immobilized enzymes were 45 and 50°C, respectively. After using immobilized enzyme in 3 days for 43 times, it showed 76–80% of its original activity. As a result of immobilization, thermal and storage stabilities were increased. The aim of this study was to increase the storage stability and reuse number of the immobilized enzyme and also to compare this immobilization method with others with respect to storage stability and reuse number. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1526–1530, 2004     

The preparation,characterization, and properties of silver nanoparticle reinforced reduced graphene oxide–poly(amidoamine) nanocomposites

A simple approach was employed to synthesize silver nanoparticle (Ag NP) reinforced reduced graphene oxide–poly(amidoamine) (Ag‐r‐RGO–PAMAM) nanocomposites. The structural changes of the nanocomposites with the PAMAM and Ag NPs were confirmed by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, Raman spectroscopy, and scanning electron microscopy. In addition, the performance was characterized with thermogravimetric and electrical conductivity instruments. The results indicate that the Ag NPs are well dispersed in fine size on the surface of the RGO–PAMAM composites, which results in an increase of at least 38% in thermostability and a certain enhancement in electrical conductivity. It is worth noting that the electrical conductivity of the nanocomposites was approximately 5.88 S cm^?1, which was higher than that of RGO–PAMAM, and increases with the rising content of silver nanoparticles. Meanwhile, the Ag‐r‐RGO–PAMAM nanocomposites still maintain a favorable dispersion in organic solvents. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45172.     

Adsorption of iodine on hydrogen‐reduced silver‐exchanged mordenite: Experiments and modeling

The adsorption process of iodine, a major volatile radionuclide in the off‐gas streams of spent nuclear fuel reprocessing, on hydrogen‐reduced silver‐exchanged mordenite (Ag⁰Z) was studied at the micro‐scale. The gas‐solid mass transfer and reaction involved in the adsorption process were investigated and evaluated with appropriate models. Optimal conditions for reducing the silver‐exchanged mordenite (AgZ) in a hydrogen stream were determined. Kinetic and equilibrium data of iodine adsorption on Ag⁰Z were obtained by performing single‐layer adsorption experiments with experimental systems of high precision at 373–473 K over various iodine concentrations. Results indicate approximately 91% to 97% of the iodine adsorption was through the silver‐iodine reaction. The effect of temperature on the iodine loading capacity of Ag⁰Z was discussed. The Shrinking Core model describes the data well, and the primary rate controlling mechanisms were macro‐pore diffusion and silver‐iodine reaction. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1024–1035, 2017     

Enhanced mechanical properties and bactericidal activity of polypropylene nanocomposite with dual‐function silica–silver core‐shell nanoparticles

Dual‐function silica–silver core‐shell (SiO₂@Ag) nanoparticles (NPs) with the core diameter of 17 ± 2 nm and the shell thickness of about 1.5 nm were produced using a green chemistry. The SiO₂@Ag NPs were tested in vitro against gram‐positive Staphylococcus aureus (S. aureus) and gram‐negative Escherichia coli (E. coli), both of which are human pathogens. Minimal inhibitory concentrations of the SiO₂@Ag NPs based on Ag content are 4 and 10 μg mL^?1 against S. aureus and E. coli, respectively. These values are similar to those of Ag NPs. SiO₂@Ag NPs were for the first time incorporated to a commodity polypropylene (PP) polymer. This yielded an advanced multifunctional polymer using current compounding technologies i.e., melt blending by twin‐screw extruder and solvent (toluene) blending. The composite containing 5 wt % SiO₂@Ag NPs (0.05 wt % Ag) exhibited efficient bactericidal activity with over 99.99% reduction in bacterial cell viability and significantly improved the flexural modulus of the PP. Anodic stripping voltammetry, used to investigate the antibacterial mechanism of the composite, indicated that a bactericidal Ag⁺ agent was released from the composite in an aqueous environment. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electropreparation of (±)‐10‐camphorsulfonate‐doped poly(o‐phenylenediamine) in acetonitrile and its use in determination of glucose

Poly(o‐phenylenediamine) (PoPD) film has been electrochemically prepared on Pt electrode in an acetonitrile–water medium containing o‐phenylenediamine (oPD) monomer and (±)‐10‐camphorsulfonic acid (HCSA) by using the cyclic voltammetry (CV). The PoPD film (PoPD–CSA) has been characterized by FTIR, CV, EIS, FESEM, and conductivity measurement. The glucose biosensor (Pt/PoPD–CSA/GOx) has been prepared from the PoPD coated electrode by immobilizing glucose oxidase (GOx) enzyme using glutaraldehyde. The biosensor shows a low detection limit and wide linear working range, a good reusability, long‐term stability, and anti‐interference ability. The Pt/PoPD–CSA/GOx has possesses higher sensitivity (2.05 μA/mmol L^?1) and affinity to glucose due to the use of CSA ion as dopant. The linear concentration ranges of Pt/PoPD–CSA/GOx have been found to be 9.6 × 10^?3 to 8.2 mmol L^?1 from calibration curve and 4.6 × 10^?2 to 100 mmol L^?1 from the relationship between the (1/glucose concentration) and (1/current difference). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39864.     

Determination of hydroquinone using poly(3‐methylthiophene) synthesized electrochemically on pt electrode in methylene chloride

Poly(3‐methylthiophene) (P3MT) film was synthesized by potentiodynamic method on Pt electrode in methylene chloride solution containing 0.10M tetrabuthlammonium perchlorate supporting electrolyte and used for the determination of hydroquinone (HQ) with amperometric I–t method in solution consisting of NaHSO₄/Na₂SO₄ (SBS; pH 2.0). This modified electrode has a lower working potential and good operational stability due to reducing electrode fouling when compared with the direct oxidation of HQ at the bare Pt electrode. Limit of detection, limit of quantification, and the linear response range were found to be 1.32 × 10^?5 mM, 4.41 × 10^?5 mM, and between 4.41 × 10^?5 – 50.0 mM (R² = 0.997), at 0.50 V versus saturated calomel electrode, respectively. HQ determination in complex matrix was checked using real samples to demonstrate the applicability of modified electrode. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40859.     

Development of an amperometric biosensor based on a redox‐mediator‐doped polypyrrole film

An amperometric biosensor was developed for the quantitative estimation of phenolic compounds in aqueous media. The enzyme tyrosinase [poly(phenol oxidase) (PPO)] was adsorbed onto a hexacyanoferrate(II)‐ion‐doped conducting polypyrrole (PPY) film deposited on an indium tin oxide (ITO) coated glass‐plate support. The PPO activity in the PPO/Fe²⁺‐PPY/ITO film was assayed as a function of the concentration of phenolic compounds. Cyclic voltammetric studies were carried out on this enzyme electrode, and the surface morphology of the enzyme‐immobilized polymer film was studied with scanning electron microscopy. The results of the amperometric response of the PPO/Fe²⁺‐PPY/ITO film showed sensitivities of 0.14, 0.21, and 0.36 A M^?1cm^?2 and linear response ranges of 9.9–84.7, 6.7–72.6, and 3.9–48.8 μM for phenol, catechol, and p‐chlorophenol, respectively. The PPO/Fe²⁺‐PPY/ITO electrode exhibited a response time of about 50 s and was stable for about 12 weeks at 4°C. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 927–933, 2004     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Conducting composites prepared by the reduction of silver ions with poly(p‐phenylenediamine)

Poly(p‐phenylenediamine) (PPDA) and also its ladder‐like analogue were prepared by oxidation of p‐phenylenediamine with ammonium peroxydisulfate in an aqueous solution of 0.4 mol L^?1 hydrochloric acid and converted to PPDA bases. These were used as reductants of silver nitrate to silver nanoparticles in 1 mol L^?1 methanesulfonic acid or in water at various mole ratios of silver nitrate to p‐phenylenediamine units from 0 to 1.8. The original conductivity of the PPDA, 10^?12 S cm^?1, increased to the order of 100 S cm^?1 for the PPDA–silver composites containing 27–40 wt% (i.e. 4.5–6.6 vol%) silver. Fourier transform infrared spectra indicated a practically unchanged molecular structure of PPDA in the composites. In contrast, Raman spectroscopy showed the existence of regions with unchanged molecular structure of PPDA as well as the presence of regions containing silver particles and oxidized PPDA moieties. © 2014 Society of Chemical Industry     

Synthesis and characterization of novel silver/L‐phenylalanine‐based optically active polyacrylate nanocomposite

Novel bioactive and optically active poly(N‐acryloyl‐L ‐phenylalanine) (PAPA) was synthesized by atom transfer radical polymerization. PAPA‐silver (Ag) nanocomposites have been successfully prepared via in situ reducing Ag⁺ ions anchored in the polymer chain using hydrazine hydrate as reducing agent in an aqueous medium. By controlling of the amount of Ag⁺ ions introduced, we have produced an organic/inorganic nanocomposite containing Ag nanoparticles with well controlled size. Nanocomposites were characterized by X‐ray diffraction (XRD), UV–Vis spectrophotometry, transmission electron microscopy, and Fourier transform infrared. XRD pattern showed presence of Ag nanoparticles. The PAPA/Ag nanocomposites with 1 : 10 silver nitrate (AgNO₃) : PAPA ratio revealed the presence of well‐dispersed Ag nanoparticles in the polymer matrix. All of these Ag nanoparticles formed are spherical and more than 80% of them are in the range of 15–25 nm. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Dielectric properties of silver-doped nanoporous silicate glasses in the temperature range between –50 and +250°C

The results of measuring dielectric parameters of nanoporous silicate glasses with a nanopore size of 3.5 and 25.7 nm, either doped with silver or not, in the temperature range between–50 and +250°C and the frequency range of 0.1–10⁶ Hz are reported. It is demonstrated that when silver nanoparticles are formed in glass pores, some silver remains in the form of subnanosized molecular clusters Ag _n and molecular complexes Ag _n –(OH) _m . The key dielectric properties of the relaxation centers are determined for different temperature ranges.     

Antimicrobial properties of silver nanoparticles synthesized by bioaffinity adsorption coupled with TiO2 photocatalysis

BACKGROUND: On the basis of effective bioaffinity adsorption of Ag⁺, silver nanoparticles (Ag NPs) were synthesized on the surface of chitosan‐TiO₂ adsorbent (CTA) by TiO₂ photocatalysis for crystal growth. RESULTS: Among the microstructure characterizations of the resulting silver nanoparticles‐ loaded chitosan‐TiO₂ adsorbent (Ag‐CTA), X‐ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy dispersive X‐ray (EDX) revealed the formation of metallic Ag on the CTA, which was further confirmed by the surface plasmon resonance of Ag NPs in the UV‐visible absorption spectrum. The underlying mechanism behind the formation of Ag NPs on the CTA by TiO₂ photoreduction was studied by Fourier transform infrared (FTIR) spectroscopy. The distinctive feature of Ag‐CTA after adsorption was the highly efficient antimicrobial activity in inactivating different test strains. In the case of Escherichia coli, 1.50 mg 1.67 wt% Ag‐CTA could totally inhibit 1.0–1.2 × 10⁷ colony forming units (CFU) in 100 mL nutrient medium, which was superior to that previously reported. CONCLUSIONS: CTA effectively adsorbed the precious metal ion Ag⁺ onto active imprinting sites on the adsorbent and then exerted efficient antimicrobial effects against diverse microbes. This research will be useful for designing a novel CTA‐based wastewater treatment for multi‐functional performance. Copyright © 2010 Society of Chemical Industry     

Rigid polyurethane foams derived from cork liquefied at atmospheric pressure

The aim of this study was to evaluate the possibility of using polyols derived from liquefied cork in the production of novel bio‐based polyurethane foams (PUFs). For that purpose, different liquefaction conditions were used at atmospheric pressure and moderate temperature where poly(ethylene glycol) and glycerol were used as solvents and sulfuric acid as catalyst. The ensuing polyols were used to produce foams which were characterized using structural, morphological, thermal and mechanical analyses to demonstrate that liquefaction conditions play a crucial role in the properties of the foams. The resulting foams exhibited the typical cellular structure of PUFs with low densities (57.4–70.7 kg m^?3) and low thermal conductivities (0.038–0.040 W m^?1 K^?1). However, the mechanical properties differed significantly depending on the liquefaction conditions. The best stress–strain results were obtained for PUFs prepared using the polyol with lowest I_OH and water content (Young's modulus of 475.0 kPa, compressive stress (σ_10%) of 34.6 kPa and toughness of 7397.1 J m^?3). This PUF was thermally stable up to 200 °C and presented a glass transition temperature of around 27 °C. The results obtained demonstrate that these polyols from liquefied cork yield PUFs that are adequate materials for insulation applications. © 2014 Society of Chemical Industry     

Sub‐Tg enthalpy relaxation in a milling‐derived chalcogenide glass

In this work we succeeded in synthesizing a chalcogenide glass, that is, the Ag₃PS₄ glass, by milling the mixture of the crystalline Ag₂S and P₂S₅ powder. In terms of potential energy, the glass was excited by the milling process. The evidence for the energy excitation was the occurrence of the sub‐T_g relaxation recorded by a differential scanning calorimeter (DSC). The relaxation behavior in the milling‐derived Ag₃PS₄ glass was found to significantly differ from that of a hyperquenched oxide glass. We observed two decoupled peaks of the energy release during a DSC scan, which are in contrast to the single asymmetric peak of the hyperquenched glass. The low‐temperature peak could be attributed to the β‐relaxation of the Ag–S ionic bonds, whereas the high‐temperature peak could arise from the α‐relaxation of the distorted rigid [PS₄] units involving covalent bonds. The decoupling between the two peaks implies the fragile nature of the Ag₃PS₄ glass. Upon the dynamic heating and the sub‐T_g annealing we found that the relaxation of the Ag₃PS₄ glass is of high nonexponentiallity, and hence, of high structural heterogeneity.