共查询到20条相似文献,搜索用时 250 毫秒
1.
2.
结合尼日尔Agadem油田一体化项目炼厂部分全厂总配电所无扰动快切装置(无扰动备用电源替续控制系统)的调试工作,简单介绍了快切装置的工作原理和调试方法,并将无扰动快切装置与传统备自投装置作了简单的比较. 相似文献
3.
日本川崎重工业株式会社的名为Kawacs的高压水冲切系统由高压水发生装置分别配以平面冲切装置、机械手冲切装置或流水线冲切装置组成。上述高压水发生装置主要使用能产生3500个大气压的高压水泵,高压水供给量为2.6~9.21/min(取决于 相似文献
4.
5.
介绍SID-8BT型多微机同期快切复用装置,对其可靠性,快速性,同期合闸的优点进行了对比。 相似文献
6.
马宝义 《精细与专用化学品》2021,29(9):23-27
35kV变电站双电源供电无自动切换装置不能满足装置运行要求.对35kV厂用快切装置回路改造方案设计、选择及回路构成以及功能等进行了介绍.通过改造,提高厂用电切换的成功率,保证了供电的稳定性. 相似文献
7.
一、引言胶鞋海绵中底的制备,我国过去一直沿用由马尔他间歇运动机构实现的冷冲切方法。这种方法机器噪音大、磨损快,更换模具麻烦,辅助时间长;由于冲切有空程,回胶率高,生产效率也较低。我厂于1986年设计制造了1台海绵中底冷却滚切装置,该装置的滚刀由电热管加热,采 相似文献
8.
9.
本文介绍了切胶边装置的技术改造情况,包括切胶边装置的主要结构和工作原理、技术特点和技术要求。经实际使用证明,技改后的切胶边装置结构简单,性能良好,能完整切掉胶边,不损伤胶帘布;降低胶料消耗,提高压延帘布质量;工人操作简单,使用方便。 相似文献
10.
11.
研究一类系统状态不可测的不确定性网络切换模糊系统的鲁棒镇定问题。考虑单包传输且没有数据包丢失的情况,建立网络切换模糊系统的离散模型,使用切换技术及多Lyapunov函数方法,设计模糊观测器及反馈控制器,并以矩阵不等式的形式给出使系统渐近稳定的条件。最后仿真结果表明方法的有效性。 相似文献
12.
简述了酚蒸馏生产工艺和切换制度在生产过程中的作用,对比分析了色谱分析法、结晶点法和蒸馏试验的测试原理及其优缺点,实践证明,色谱分析法在酚蒸馏切换制度中的应用,具有生产指导性强、提取率高、所切取产品质量优等特点。 相似文献
13.
通过分析香水瓶盖的结构特点和成型工艺,设计了香水瓶盖注塑模,介绍了模具结构与工作过程,重点阐述了点浇口转侧浇口浇注系统、脱模机构和斜顶侧抽芯机构的设计,最后介绍了点浇口转侧浇口浇注系统的应用实例。实践表明,点浇口转侧浇口浇注系统有利于浇口的设置和塑件的填充。 相似文献
14.
15.
PAUL D. BABA 《Journal of the American Ceramic Society》1965,48(6):305-309
A technique is described for obtaining fast switching in square-loop ferrites. Domain wall motion is inhibited by addition of nonmagnetic inclusions such as thorium oxide and palladium. The magnetization is then reversed by the faster nonuniform rotational mode of switching. Coincident current switching times as low as 0.10-μsec were measured for samples containing inclusions. A control sample of the same composition, but without inclusions, had a switching time of 0.85μsec. This technique improved the stability of ferrite properties with respect to firing time and temperature and the presence of reactive impurities. For example, the coercive force varied by no more than ±2% within a 4-hour range of firing times and only ±6% variation was noted for a 50°C range of firing temperatures. A similar stabilizing effect occurred when inclusions were added to a ferrite containing 0.03 at.% calcium, a reactive impurity. 相似文献
16.
针对合成空分分子筛吸附器采用的气动控制系统所存在的问题,提出了用PLC实现对分子筛吸附器切换控制系统的改造方案,并给出控制系统框图。 相似文献
17.
18.
针对一类含有不确定参数的非线性系统,基于其参数的不确定范围,设计多个滑模变结构控制器。在此基础上,基于一给定的指标切换函数构造切换控制器。在确保系统Lyapunov稳定性的前提下,被控对象的控制器按照预先设定好的切换条件,在多个控制器之间相互切换,从而极大地改善系统的瞬态响应。以工业机器人手臂为研究对象,针对机器人手臂运动方程构造滑模变结构控制器,并设计以输出误差为自变量的指标切换函数,基于此切换函数构造切换控制器,使机械手的控制器在多个控制器之间进行切换。针对不同的参数变化范围,研究切换控制的有效性。多个仿真实例表明切换控制能极大地改善控制品质。 相似文献
19.
对大庆石化二厂变电所倒闸操作监测系统做了总体设计,介绍了整个操作系统的构成及其功能。通过现场调试,此操作监测系统能实现在无人值守的情况下,自动地完成测量、记录和控制工作,还可以实现信息远距离传送和数据处理。 相似文献
20.
Polarization Switching of and Electron Emission from Lead Lanthanum Zirconate Titanate Ceramics 总被引:2,自引:0,他引:2
Weiming Zhang Wayne Huebner Stephen E. Sampayan Mike L. Krogh 《Journal of the American Ceramic Society》1999,82(3):591-599
This paper focuses on understanding the influence of ma-terial properties on the complicated ferroelectric (FE) emis-sion process. Three different compositions in the lead lan-thanum zirconate titanate (PLZT) system were chosen for study, based on their widely different dielectric and ferro-electric properties: antiferroelectric (AFE) 2/95/5, "nor-mal" ferroelectric 8/65/35, and nonferroelectric 15/65/35. Repeatable emission was obtained from the 2/95/5 compo-sition, which could also be modulated at high frequency (200 kHz). The fast AFE ⇆ FE phase transition is respon-sible for the FE emission properties of this material, which is supported by the relationship between the switching cur-rent and the emission current. Comparatively, FE emission from the 8/65/35 composition degraded rapidly, which was attributed to decreases in the remanent polarization. No emission signal was detected from the 15/65/35 composi-tion, because no switching activity occurs, which can be interpreted as additional evidence that electron emission from the previously mentioned two compositions was in-deed a FE emission process. 相似文献