Novel AMoO4:Eu3+ (A = Ca and Ba) optical thermometer: Investigation of effect of local ionic coordination environment on optical performance and temperature measurement sensitivity

A range of Eu³⁺-doped AMoO₄ (A = Ca and Ba) phosphors were successfully synthetized, and their crystal structures, optical performance, and temperature measurement sensitivities were investigated in detail. Peak doping concentration of CaMoO₄:Eu³⁺ phosphor was 0.18, while peak doping concentration of BaMoO₄:Eu³⁺ phosphor may be greater than 0.18. Then, temperature-dependent photoluminescence emission spectra of representative CaMoO₄:0.09Eu³⁺ and BaMoO₄:0.03Eu³⁺ phosphors were recorded. CaMoO₄:0.09Eu³⁺ phosphor exhibited abnormal thermal quenching, which was attributed to defects caused by heterovalent substitution of ions and increase in the temperature, and good thermal stability. Finally, the possibility of using both phosphors as optical thermometers was discussed, which exhibited good temperature sensitivity. However, CaMoO₄:0.09Eu³⁺ phosphor exhibited two peak absolute (Sa, 1.28 %K⁻¹ and 1.39 %K⁻¹) and relative sensitivities (Sr, 1.21 %K⁻¹ and 1.20 %K⁻¹). In addition, variation trend of Sr value with temperature was considerably peculiar. Two optimum Sa and Sr values were attributed to abnormal thermal quenching of CaMoO₄:0.09Eu³⁺ phosphor. Peak Sa and Sr values of BaMoO₄:0.03Eu³⁺ phosphor was 12.39 %K⁻¹ and 0.89 %K⁻¹, respectively. In addition, Sa of AMoO₄:Eu³⁺ phosphor was negatively related to Eu³⁺ central asymmetry, while peak Sr value was more inclined to appropriate ionic central asymmetry.     

Luminescence and optical thermometry strategy based on emission and excitation spectra of Pr3+ doped SrMoO4 phosphors

Recent developments of luminescence ratiometric thermometry have attracted much attention owing to its merits of fast response, non-invasiveness and high spatial resolution. In this work, the synthesis, crystal structure and luminescence properties has been carried out for Pr³⁺-activated SrMoO₄ phosphors as optical thermometry. The XRD results show that all the phosphors possess the scheelite type tetragonal structure with space group I4₁/a. The efficient luminescence of Pr³⁺ can be observed under intra-configurational (4f-4f) and charge transfer band (Mo–O) excitations, respectively. Upon different excitations, the quenching concentration of Pr³⁺ is diverse due to the multi-phonon relaxation and cross-relaxation processes occurring in different excited states of Pr³⁺ ions. The fluorescence intensity ratio (FIR) techniques based on emissions of ³P₀ and ¹D₂ excited states of Pr³⁺, and the FIR in the excitations of the charge transfer band (Mo–O) and 4f-4f transitions of Pr³⁺ were employed for the thermometric characterizations in the 298–498 K range. Both results show remarkable performance in temperature sensing with the maximum relative sensitivity of 0.45%K^?1@489 K and 0.98 %K^?1@298 K, respectively. Our study demonstrates that Pr³⁺-activated SrMoO₄ phosphors have a promising potential application in non-contact optical thermometry.     

A novel red-emitting Na5W3O9F5:Eu3+ phosphor with high color purity for blue-based WLEDs

Red phosphor plays a key role in improving the lighting and display quality of phosphor-converted white light-emitting diodes (pc-WLEDs). Meanwhile, developing new luminescent matrix materials can positively contribute to the acquisition of ideal and efficient phosphors. In this work, we propose a novel red-emitting Na₅W₃O₉F₅:Eu³⁺ (NWOF:Eu³⁺) phosphor. The phase composition, morphology, electronic structure and photoluminescence properties of the NWOF:Eu³⁺ phosphor were systematically investigated. The EXAFS results prove that the Eu³⁺ dopants occupy the Na2 and Na3 sites in the NWOF host. Under 466 nm blue light excitation, NWOF:xEu³⁺ (0.05 ≤ x ≤ 0.25) phosphors display a dominant red emission at 607 nm and achieves a high color purity (97.44%) due to the dominant electric dipole transition (⁵D₀→⁷F₂) of Eu³⁺ ions. Impressively, this red-emitting NWOF:0.25Eu³⁺ phosphor exhibits relatively superior thermal stability (450 K, >50%) and excellent chromaticity stability (2.32 × 10^?4 ≤ ΔE ≤ 6.23 × 10^?3) from 298 K to 498 K. The activation energy for thermal quenching effect is determined to be 0.22 eV. Moreover, the pc-WLED was fabricated by coupling a 460 nm blue chip with the as-synthesized NWOF:0.25Eu³⁺ red phosphor and commercial YAG:Ce³⁺ phosphor. The optical parameters of the as-fabricated pc-WLED are also measured, and the CIE coordinates remain almost constant as the drive current increases from 20 mA to 120 mA. These results indicate that the NWOF:0.25Eu³⁺ red phosphors should be a suitable candidate as a red component for the preparation of pc-WLEDs.     

A high quantum yield red phosphor NaGdSiO4: Eu3+ with intense emissions from the 5D0→7F1,2 transition

Red phosphors with a high quantum yield and a lower thermal quenching are needed to improve the luminescence efficiency and the stability of phosphor-converted white light-emitting diodes (pc-WLEDs). We have designed a high quantum yield NaGdSiO₄ (NGSO) based phosphor with enhanced Eu³⁺ emissions of the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions. This design is based on the Eu³⁺ at both the inversion and non-inversion symmetry sites. In detail, we have studied the structure, morphology, and luminescence properties of NGSO: Eu³⁺ phosphors. Using a 394 nm UV excitation, a series of Eu³⁺ emissions of ⁵D₀→⁷F_J (0–4) transitions has been observed. The internal quantum efficiency (IQE) is 83.42% and the red color purity is 91.4%. These values are much higher than some reported results. The higher IQE and double intense ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ emissions might originate from an unusual structure disorder around Eu³⁺ ions in the NGSO lattice. The lifetime of the optimal phosphor NGSO: 0.5Eu³⁺ is about 2 ms, suitable for solid-state lighting. The intensities of the strong emissions at 595 and 624 nm of NGSO: 0.5Eu³⁺ at 150 °C is about 85% of that at 30 °C, demonstrating its excellent thermal stability. Furthermore, this red NGSO: 0.5Eu³⁺ phosphor was packaged into a warm pc-WLED, exhibiting a lower correlated color temperature (CCT) of 4222 K and a comparable color rendering index (CRI) of 86.7. These results show that this red phosphor could act as a red component of pc-WLEDs excited by the n-UV LED chip.     

Dual-mode optical thermometry based on Bi3+/Eu3+ co-activated BaGd2O4 phosphor with high sensitivity and signal discriminability

A series of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors with dual-emitting centers were prepared by high-temperature solid-state method. X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), fluorescence spectroscopy, lifetime decay curve and variable temperature emission spectroscopy were used to systematically study the structure, luminescence performance and temperature characteristics. Under ultraviolet (UV) excitation, the BaGd₂O₄:Bi³⁺,Eu³⁺ phosphor showed a broad-band emission in the blue region corresponding to transitions of Bi³⁺ ions and the sharp red light emission corresponding to Eu³⁺ ions. The Bi³⁺ and Eu³⁺ ion emission peaks were well-separated, which meets a prerequisite for efficient temperature signal resolution measurement. The fluorescence intensity ratio (FIR) technique was used to measure the different temperature response characteristics between Bi³⁺ blue emission and Eu³⁺ red emission. When the temperature varies from 293 K to 473 K, the relative temperature sensitivity (S_r) of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors is obtained, was determined as 1.0182%K⁻¹. In addition to calculating the relative sensitivity by FIR technology, we can also obtain the value of S_r through experiments and formulas related to the decay life, and found to be 1.0651%K⁻¹. Therefore, BaGd₂O₄: Bi³⁺,Eu³⁺ phosphor is an excellent non-contact optical temperature measurement material.     

A novel scheelite-type LiCaGd(WO4)3:Eu3+ red phosphors with prominent thermal stability and high quantum efficiency

A series of LiCaGd(WO4)3 : xEu³⁺ (0 ≤ x ≤ 1.0) red phosphors with tetragonal scheelite structure were synthesized via the conventional solid-state reaction. Their crystal structure, photoluminescence excitation (PLE), and photoluminescence (PL) spectra, thermal stability and quantum efficiency were investigated. The phosphors exhibit a typical red light upon 395 nm near ultraviolet excitation, and the strongest emission peak at 617 nm is dominated by the ⁵D₀→⁷F₂ transition of Eu³⁺ ions. The PL intensity of the phosphors gradually increases with the increase of Eu³⁺ doping concentration, and the concentration quenching phenomenon is hardly observed. The quantum efficiency and the color purity of the phosphor reach maximum values of about 94.2 and 96.6% at x = 1.0, respectively. More importantly, LiCaGd(WO₄)₃:xEu³⁺ phosphors have prominent thermal stability. The temperature-dependent PL intensity of the phosphors at 423 K is only reduced to 89.1% of the PL intensity at 303 K, which is superior to that of commercial red phosphors Y₂O₃:Eu³⁺. Finally, LiCaGd(WO₄)₃:Eu³⁺ phosphor is packaged with near ultraviolet InGaN chips to fabricate white light emitting diodes, which has a low color temperature (CCT = 4622 K) and a high color rendering index (CRI= 89.6).     

Structure and Luminescence of New Red‐Emitting Materials‐Eu3+‐Doped Triple Orthovanadates NaALa(VO4)2 (A = Ca,Sr, Ba)

The new red‐emitting phosphors of Eu³⁺‐doped triple orthovanadates NaALa(VO₄)₂ (A = Ca, Sr, Ba) were prepared by the high‐temperature solid‐state reaction. The formation of single phase compound with isostructural structure of Ba₃(VO₄)₂ was verified through X‐ray diffraction (XRD) studies. The photoluminescence excitation and emission spectra, the fluorescence decay curves and the dependence of luminescence intensity on doping level were investigated. The phosphor can be efficiently excited by near UV and blue light to realize an intense red luminescence (613 nm) corresponding to the electric dipole transition ⁵D₀→⁷F₂ of Eu³⁺ ions. Their potential applications as red‐emitting phosphors for solid‐state lighting were evaluated in comparison with the Eu³⁺‐doped lanthanum orthovanadate LaVO₄ and other reported references. The luminescence was discussed in detail on the base of the crystal structures. The luminescence thermal stability on temperature was investigated and the thermal activated energy was calculated. The phosphors can be suggested to be a potential red‐emitting phosphor for the application on white LEDs under irradiation of near‐UV or blue chips.     

Synthesis and luminescence properties of single‐component Ca5(PO4)3F:Dy3+, Eu3+ white‐emitting phosphors

A series of Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors was synthesized by a solid‐state reaction method. The XRD results show that all as‐prepared Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ samples match well with the standard Ca₅(PO₄)₃F structure and the doped Dy³⁺ and Eu³⁺ ions have no effect on the crystal structure. Under near‐ultraviolet excitation, Dy³⁺ doped Ca₅(PO₄)₃F phosphor shows blue (486 nm) and yellow (579 nm) emissions, which correspond to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions respectively. Eu³⁺ co‐doped Ca₅(PO₄)₃F:Dy³⁺ phosphor shows the additional red emission of Eu³⁺ at 631 nm, and an improved color rendering index. The chromaticity coordinates of Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors also indicate the excellent warm white emission characteristics and low correlated color temperature. Overall, these results suggest that the Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors have potential applications in warm white light‐emitting diodes as single‐component phosphor.     

Homogeneous Precipitation Synthesis and Low‐Voltage Cathodoluminescence of SnO2:Eu3+ Phosphors for Field Emission Displays

A reddish‐orange‐emitting SnO₂:Eu³⁺ phosphor for field emission displays (FEDs) was successfully synthesized via a homogeneous precipitation route using urea as a precipitant. The influences of the dopant concentration of Eu³⁺ and calcination temperature on optical properties were investigated. The low‐voltage field emission properties of the FED device prepared using the synthesized SnO₂:Eu³⁺ phosphors were reported. Under the UV light, SnO₂:Eu³⁺ phosphors display the strong orange–red emission peaked at 587, 591, and 597 nm due to the ⁵D₀→⁷F₁ magnetic dipole transition of Eu³⁺. The phosphor doped with 1.0 mol% Eu³⁺ possesses the highest photoluminescent (PL) intensity. Under the low‐voltage excitation of 300 V, the fabricated FED device exhibits the bright orange–red emission, high‐voltage brightness saturation, and high color purity, which has a potential application in low‐voltage full color FEDs.     

Effect of energy transfer and local crystal field perturbation on the thermometric sensitivity of Ga-Tb-Eu ternary emission system

A series of optical thermometers based on Eu³⁺/Tb³⁺ doped Y₃Ga₅O₁₂ with self-excited GaO₆ group phosphors were designed through controllable energy transfer and local crystal field perturbation simulated using the density-functional theory approach and related structures. Color-tunable properties of the phosphors could be achieved through controllable energy transfer. In addition, the thermometers exhibited superb temperature sensitive properties. Over the entire temperature range (298.15–598.15 K), maximum values of the absolute sensitivity and relative sensitivity are 0.028 K^?1 and 7.03 %K^?1, respectively. Meanwhile, the thermometer has outstanding resolution (ΔT = 0.0043 K) and repeatability (98.37%).     

Luminescence properties of Ca2GdNbO6: Sm3+, Eu3+ red phosphors with high quantum yield and excellent thermal stability for WLEDs

A series of Ca₂GdNbO₆: xSm³⁺ (0.01 ≤ x ≤ 0.15) and Ca₂GdNbO₆: 0.03Sm³⁺, yEu³⁺ (0.05 ≤ y ≤ 0.3) phosphors were synthesized by the traditional solid-state sintering process. XRD and the corresponding refinement results indicate that both Sm³⁺ and Eu³⁺ ions are doped successfully into the lattice of Ca₂GdNbO₆. The micro-morphology shows that the elements of Ca₂GdNbO₆: 0.03Sm³⁺, 0.2Eu³⁺ phosphor are evenly distributed in the sample, and the particle size is about 2 μm. The optical properties and fluorescence lifetime of Ca₂GdNbO₆: 0.03Sm³⁺, Eu³⁺ phosphors were detailedly studied. The emission peak at ⁵D₀→⁷F₂ (614 nm) is the strongest and emits red light under 406 nm excitation. The increase of Eu³⁺ concentration causes the energy transfers from Sm³⁺ to Eu³⁺ ions, and the transfer efficiency reaches 28.6%. Ca₂GdNbO₆: 0.03Sm³⁺, 0.2Eu³⁺ phosphor has a quantum yield of about 82.7%, and thermal quenching activation energy is of 0.312 eV. The color coordinate (0.646, 0.352) of Ca₂GdNbO₆: 0.03Sm³⁺, 0.2Eu³⁺ phosphors is located in the red area. The LED device fabricated based on the above phosphor emit bright white light, and CCT = 5400 K, Ra = 92.8. The results present that Ca₂GdNbO₆: 0.03Sm³⁺, Eu³⁺ phosphors potentially find use in the future.     

Eu2+ activated novel eulytite Na3Bi5(PO4)6: Eu3+ phosphors: Enhanced luminescence and thermal stability for photonics application

For the first time, novel eulytite-like Eu²⁺/Eu³⁺: Na₃Bi₅(PO₄)₆ phosphor was synthesized via high temperature solid-state reaction method in reduction environment, and the structure, luminescence performances and thermal stability were investigated and discussed using various techniques. X-ray refinement diffraction and Raman spectra revealed the around 200 nm well-crystallized eulytite-type (I43d space group) phosphors were synthesized, and a diagram of crystal structure of Na₃Bi₅(PO₄)₆ was proposed. X-ray photoelectron spectroscopy analysis confirmed the co-existence of Eu²⁺ and Eu³⁺ ions which exhibited characteristic 4f⁶5d→⁸S_7/2 transition of Eu²⁺ and ⁷F₀→⁵D_0,1,2,3,4 transitions of Eu³⁺ ions. On the other hand, due to the activation of Eu²⁺, samples displayed good tunability on excited and emission behaviors under different excited laser. The JO parameters, emission cross-section, branching ratio and asymmetric ratio indicated that the Eu doping increased the covalency and asymmetry of host. Thermal quenching was studied and the reasons were discussed. Through the comparison of phosphors prepared in different conditions, the thermal stability& repeatability, radiative lifetime, color purity and activation energy were remarkably superior due to the Eu doping and in particularly Eu²⁺ activation. Finally, the energy level and CIE chromaticity diagrams were plotted to explain the mechanism of Eu²⁺ activation and energy transfer between Eu²⁺ and Eu³⁺ ions. The 0.5%Eu doped Na₃Bi₅(PO₄)₆ exhibited promising tunable red-emission performance with quantum efficiency of 92%, activation energy of 0.24 eV, red color purity of 93.74% and very low non-radiative transfer ratio 44.20 s^?1 with smaller CCT (<2200 K).     

Synthesis,structure and luminescence of a high-purity and thermal-stable Sr9LiMg(PO4)7: Eu3+ red phosphor

Eu³⁺-activated Sr₉LiMg(PO₄)₇ phosphors, which presented bright red emissions mainly from the ⁵D₀→⁷F₂ transition of Eu³⁺ ions upon the near-ultraviolet excitation, were successfully synthesized in ambient atmosphere. The crystal structure, phase constitution, photoluminescent behaviors, decay time, internal quantum efficiency and thermal stability of the resultant phosphors were investigated in detail. Eu³⁺ ions are found to tend to occupy multiple Sr²⁺ sites, which are 7, 8 and 10-coordinated. The optimal doping concentration is 7 mol% and the electrical multipolar interaction contributed to the non-radiative energy transfer between Eu³⁺ ions in Sr₉LiMg(PO₄)₇ host lattices. Temperature-dependent PL spectra indicated Sr₉LiMg(PO₄)₇: Eu³⁺ possess excellent emission and color stability at elevated temperature. Fabricated single-chromatic LED prototype emit bright red light under 20 mA bias current, which demonstrates that Sr₉LiMg(PO₄)₇: Eu³⁺ phosphor is of great potential as converted phosphor in NUV LED application.     

Synthesis and luminescence enhancement of red-emitting Sr9Y(PO4)7:Eu3+ phosphor through Gd3+ co-doping for white light-emitting diodes

A series of Sr₉Y(PO₄)₇:Eu³⁺ and Sr₉Y(PO₄)₇:Eu³⁺, Gd³⁺ red-emitting phosphors were prepared via a high-temperature solid-state method, Gd³⁺ ion was co-doped in Sr₉Y(PO₄)₇:Eu³⁺ as sensitizer to enhance the luminescence property. The X-ray diffraction results verify that the structure of the as-prepared samples is consistent with the standard Sr₉Y(PO₄)₇ phase. All the Sr₉Y(PO₄)₇:Eu³⁺ samples show both characteristic emission peaks at 594 nm and 614 nm under near-ultraviolet excitation of 394 nm. The co-doping of Gd³⁺ significantly improves the luminescence intensity of the Sr₉Y(PO₄)₇:Eu³⁺ phosphors due to the crystal field environment effect and energy transfer of Gd³⁺→Eu³⁺ caused by the introduction of Gd³⁺, especially Sr₉Y(PO₄)₇:0.11Eu³⁺, 0.05Gd³⁺, which emission intensity is higher than that of Sr₉Y(PO₄)₇:0.11Eu³⁺ by 1.21 times. The color purity and lifetime of Sr₉Y(PO₄)₇:0.11Eu³⁺, 0.05Gd³⁺ phosphor are 88.26% and 3.7615 ms, respectively. A w-LED device was packaged via coating the as-prepared phosphor on n-UV chip of 395 nm with commercial phosphors. These results exhibit that the Sr₉Y(PO₄)₇:Eu³⁺, Gd³⁺ red-emitting phosphor can be used as a red component in the w-LEDs application.     

Synthesis,crystal structure and temperature dependent luminescence of Eu3+ doped SrGd2O4 host: An approach towards tunable red emissions for display applications

In the present paper, an investigation on the structural and photoluminescence (PL) properties of SrGd₂O₄:Eu³⁺ ceramic phosphors synthesized by homogeneous precipitation method followed by combustion process has been reported. The samples, annealed at 1200 °C, were crystallized into orthorhombic phase without any impurities. Microscopic studies revealed the irregular morphology of the obtained ceramic phosphor particles having sizes in the range of 0.3–3 µm. The characteristic photoluminescence properties and decay curves were studied in detail as a function of Eu³⁺ concentration and temperature. The Eu³⁺ doped ceramic samples illuminated with UV light revealed the characteristic red luminescence corresponding to ⁵D₀→⁷F_J transitions of Eu³⁺. The concentration quenching phenomenon of Eu³⁺ ions in the present host, analyzed in the light of ion-ion interaction, indicated multipolar interaction between Eu³⁺ ions. Finally, the intensity parameters (Ω₂, Ω₄) and various radiative properties such as stimulated emission cross-section (σ_e), gain band-width (σ_e×Δλ_eff) and optical gain (σ_e×τ_exp) of Eu³⁺ in the SrGd₂O₄ ceramic phosphors have been calculated by using Judd-Ofelt theory. The present phosphor system exhibited efficient red emission with high red color purity (95%) and adequate thermal stability even at 200 °C. Present research broadly indicated the suitability of SrGd₂O₄:Eu³⁺ ceramic phosphor for display applications.     

Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Y(PO4)3 red phosphors

A series of red-emitting phosphors Eu³⁺-doped Sr₃Y(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Y(PO₄)₃:Eu³⁺ phosphors exhibit peaks associated with the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The integral intensity of the emission spectra of Sr₃Y_0.94(PO₄)₃:0.06Eu³⁺ phosphors excited at 392 nm is about 3.4 times higher than that of Y₂O₃:Eu³⁺ commercial red phosphor. The Commission Internationale de l’Eclairage chromaticity coordinates, the quantum efficiencies and decay times of the phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Y(PO₄)₃ phosphors are promising red-emitting phosphors pumped by near-UV light.     

Improving the luminescence properties and powder morphologies of red-emitting Sr0.8Ca0.19AlSiN3:0.01Eu2+ phosphors for high CRIs white LEDs by adding fluxes

Red-emitting Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphor with halide fluxes for use in the production of white light-emitting diodes (white LEDs) with high-colour rendering indices (CRIs) was prepared through the high-temperature solid-state method. Fluoride (NaF, SrF₂, BaF₂, CaF₂, AlF₃·3H₂O and CeF₃), chloride (NH₄Cl, BaCl₂, MgCl₂, NaCl and LiCl) and composite fluxes (NaF + SrF₂, SrF₂+NH₄Cl and NaF + NH₄Cl) were applied in the phosphors. NaF, SrF₂, NH₄Cl and NaF + SrF₂ fluxes had prominent effects on the characteristics of Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphors. Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphors with various powder morphologies can be obtained through the addition of fluxes, which are conducive for phosphor formation. The powder morphologies of phosphors incorporated with NaF + SrF₂ were preferable to those of powders incorporated with other fluxes. This result indicated that the incorporation of NaF + SrF₂ into Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ yielded phosphors with high luminescent intensity and quantum efficiency, excellent thermal stability, narrow full widths at half-maximum (FWHM, 75.2 nm), uniform rod-like morphologies with large particle sizes (D₅₀ = 16.99 μm) and good particle dispersion. White LEDs with high CRIs were obtained by combining prepared phosphors (NaF + SrF₂ additive) with the commercial green-emitting phosphors Y₃(Al,Ga)₅O₁₂:Ce³⁺ and (Sr,Ba)₂SiO₄:Eu²⁺. White LEDs with Y₃(Al,Ga)₅O₁₂:Ce³⁺ and (Sr,Ba)₂SiO₄:Eu²⁺ phosphors had correlated colour temperatures (CCTs) of 3064 and 3023 K, respectively, and CRIs of 81.8 and 92.4, respectively. Therefore, NaF + SrF₂ can be used as a favourable flux for the production of Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺.     

Red-shift and improved afterglow of Sr3Al2-xBxO5Cl2:Eu2+, Dy3+ phosphors via a cation substitution strategy

Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ (x = 0, 0.2, 0.4) long persistent phosphors were prepared via solid-state process. The pristine Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺ phosphor exhibits orange/red broad band emission around 609 nm, which can be attributed to the electric radiation transitions 4f⁶5 d¹→4f⁷ of Eu²⁺. Upon the same excitation, the B³⁺-doped Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphors display red-shift from 609 nm to 625 nm with increasing B³⁺ concentrations. The XRD patterns show that Al³⁺ can be replaced by B³⁺ in the host lattice at the tetrahedral site, which causes lattice contraction and crystal field enhancement, and thereafter achieves the red-shift on the emission spectrum. The XPS investigation provides direct evidence of the dominant 2-valent europium in the phosphor, which can be ascribed for the broad band emission of the prepared phosphors. The afterglow of all phosphors show standard double exponential decay behavior, and the afterglow of Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺is rather weak, while the sample co-doped with B³⁺shows longer and stronger afterglow, as confirmed after the curve simulation. The analysis of thermally stimulated luminescence showed that, when B³⁺ is introduced, a much deeper trap is created, and the density of the electron trap is also significantly increased. As a result, B³⁺ ions caused redshift and enhanced afterglow for the Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphor.     

Preparation and luminescent modulation of KGaSiO4:Eu3+ phosphors using for multiple anti-counterfeiting

Anti-counterfeiting technology is of great significance to information security. To obtain high-quality anti-counterfeiting materials, the developments of inorganic materials are crucial. In this paper, a series KGaSiO₄:xEu³⁺ phosphors with persistent luminescence, photoluminescence, and thermochromic have been successfully prepared and the application of quadruple anti-counterfeiting is realized. The X-ray diffraction and Rietveld refinement indicate that the phosphors are pure phase. With Eu³⁺ ions doping, the structure change, site occupancies, and color-tunable phenomenon are carefully investigated. Different from another Eu³⁺ doping phosphor, the emission of KGaSiO₄:0.2% Eu³⁺ phosphor changes with the excitation light in the region of 240 nm–306 nm. The emission color can be modulated with the surrounding temperature. Surprisingly, this phosphor can emit green afterglow light, which is attributed to the different luminescent properties of the matrix and doping of Eu³⁺ ions. The series of phosphors exhibit abundant luminescent properties. Based on their wavelength dependence, concentration quenching, long afterglow, and thermochromic properties, the KGaSiO₄:xEu³⁺ phosphors can be effective materials for quadruple-modal anti-counterfeiting devices.     

Improved photoluminescence,thermal stability and temperature sensing performances of K+ incorporated perovskite BaTiO3:Eu3+ red emitting phosphors

K⁺ ions incorporated perovskite Ba_(1−x)TiO₃:x Eu³⁺ red emitting phosphors synthesized via facile solid -state reaction method has been investigated in the current study. The photoluminescence and decay time behavior of Ba_(1−x−y)TiO₃:x Eu³⁺,yK⁺ phosphors are investigated as a function of Eu³⁺, K⁺ concentration and temperature. An intense and sharp emission peak at 615 nm was exhibited by the phosphors upon excitation at 397 nm (⁷F₀→⁵L₆). It can be credited to the hypersensitive electric dipole transition ⁵D₀→⁷F₂, which confirms that Eu³⁺ ions are located at non-centrosymmetric site of the host. The incorporation of K⁺ ions in optimized Ba_0.95TiO₃:0.05 Eu³⁺ phosphor resulted in a remarkable enhancement of photoluminescence intensity by 2.33 times as compared to bare one. The Ba_0.89TiO₃:0.05 Eu³⁺, 0.06 K⁺ phosphors were found to observe good temperature sensing along with adequate thermal stability even at 427 K. Furthermore, the photometric parameters have been also studied which are strongly facilitate the prepared ceramic samples as suitable for potential application in lighting.