Study of poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) hydrogels made using gamma radiation initiation

Poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) hydrogels were synthesized using gamma‐radiation‐initiated polymerization. The progress of copolymerization and crosslinking was observed by viscosity measurement on reaction mixtures subjected to varying radiation doses. The copolymer gels were characterized by differential scanning calorimetry, X‐ray diffraction, scanning electron microscopy, infrared spectroscopy, and elemental analysis. The swelling behavior and other properties of the gels were found to be very similar to those of poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) hydrogels synthesized using conventional free‐radical initiation in the presence of crosslinkers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1322–1330, 2003     

A novel approach for synthesis of poly(norbornene)‐co‐poly(styrene) block copolymers via metathesis polymerization and free‐radical polymerization

It is successfully realized that block copolymers are synthesized via metathesis polymerization followed by free‐radical polymerization. This method is performed using styrene (St) and norbornene, one block is synthesized using the Grubbs second generation catalyst in the presence of chain transfer agents, and the subsequent polymerization of St is initiated by azo compounds to complete the additional blocks in the copolymers. The use of free‐radical polymerization instead of controlled radical polymerization or ionic polymerization can be potentially superior for industrialization. As a result, the molecular weights of the block copolymers ranging from 10.4 to 54.3 kDa and polydispersity indices ranging from 1.30 to 1.91 are obtained. In principle, this new method can be potentially useful to prepare a broad range of block copolymers with cyclic olefin groups in the main chains, which may be used in some particular applications.     

Simultaneous interpenetrating network silicone hydrogels prepared by free radical/cationic hybrid polymerization

Simultaneous interpenetrating polymer network silicone hydrogels have been prepared by UV‐initiated polymerization of a mixture of methacrylate monomer 2‐methacryloyloxyethyl phosphorylcholine (MPC) and vinyl ether terminated polydimethylsiloxane (VESi) macromonomer. The consumption of each (macro)monomer upon UV‐irradiation was monitored in situ by real‐time infrared spectroscopy. The methacrylate monomer MPC was shown to polymerize faster and more extensively than the vinyl ether terminated macromonomer VESi. Curing experiments performed in the presence of air and under air diffusion‐free conditions indicated that the free radical polymerization of MPC was affected by the oxygen inhibition effect, while the cationic polymerization of VESi was influenced by the atmosphere humidity. The results of the transmission electron microscope studies indicated that the silicone hydrogels were heterogeneous with phase domain sizes less than 10 nm. The physicochemical properties of the silicone hydrogels, such as water content, ion permeability, oxygen permeability, and contact angle were also investigated. The results showed that water content and ion permeability increased with the MPC content in the formulation, and the silicone hydrogels exhibited excellent oxygen permeability with the highest Dk of 255 barrer. The contact angle measurements indicated that the silicone hydrogels possessed hydrophilic surfaces with the lowest water contact angle of 20°. The result of the protein resistance revealed that the amount of protein adsorbed was significantly reduced with the MPC content in the formulation. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and antidehydration of interpenetrating polymer network hydrogels based on 2‐hydroxyethyl methacrylate and N‐vinyl‐2‐pyrrolidone

This work reports the preparation of 2‐hydroxyethyl methacrylate (HEMA)/N‐vinyl‐2‐pyrrolidone (NVP) interpenetrating polymer network (IPN) hydrogels by UV‐initiated polymerization in the presence of free radical photoinitiator Darocur 1173 and cationic photoinitiator 4,4′‐dimethyl diphenyl iodonium hexafluorophosphate. The polymerization mechanism was investigated by the formation of gel network. The structure and morphology of the HEMA/NVP IPN hydrogels were characterized by fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). The results showed that the IPN gels exhibited homogeneous morphology. The dehydration rates of HEMA/NVP IPN hydrogels were examined by the gravimetric method. The results revealed that the hydrogels had a significant improvement of antidehydration ability in comparison with poly(2‐hydroxyethyl methacrylate)(PHEMA) hydrogel embedded physically with poly(N‐vinyl‐2‐pyrrolidone)(PVP). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fast responsive poly(acrylic acid‐co‐N‐isopropyl acrylamide) hydrogels based on new crosslinker

Novel dual temperature‐ and pH‐sensitive poly(acrylic acid‐co‐N‐isopropylacrylamide), AA/NIPAAm, hydrogels were successfully prepared by chemical crosslinking with crosslinkers. Copolymers of AA/NIPAAm were crosslinked in the presence of different mol % of N,N‐methylene bisacrylamide (MBA) and melamine triacrylamide (MAAm) as crosslinkers by bulk radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Lower critical solution transition temperatures (LCST) were measured by DSC. The properties of crosslinked AA/NIPAAm series are evaluated in terms of compositional drift of polymerization, heterogeneous crosslinking, and chemical structure of the relevant components. Soluble fractions of the crosslinked networks were reduced by varying the MAAm and MBA concentrations. The influence of environmental conditions such as temperature and pH on the swelling behavior of these polymeric gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity. The prepared MAAm type AA/NIPAAm hydrogels exhibited a more rapid deswelling rate than MBA type AA/NIPAAm hydrogels in ultra pure water in response to abrupt changes from 20°C to 50°C. The results of this study provide valuable information regarding the development of dual stimuli‐sensitive hydrogels with fast responsiveness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Radical/Addition polymerization silicone hydrogels with simultaneous interpenetrating hydrophilic/hydrophobic networks

Transparent silicone hydrogels with interpenetrating hydrophilic/hydrophobic networks were simultaneously synthesized on the basis of the radical polymerization of the methacrylic monomer of 3‐methacryloxypropyl tris(trimethylsiloxy) silane (TRIS)/N,N‐dimethylacrylamide (DMA) and the addition polymerization of hydroxyl‐grafted polysiloxane (HPSO)/isophorone diisocyanate. The curing temperature was set at 80°C by a differential scanning calorimetry study. The polymerization process was studied by in situ Fourier transform infrared spectroscopy. The results indicate that the curing time was about 4.5 min, and the addition polymerization had a faster rate than radical polymerization. Then, the radical polymerization rate increased rapidly, and this led to instant curing. The interpenetrating polymer network (IPN) silicone hydrogels were characterized by swelling kinetics and dynamic mechanical thermal analysis. The results show that all of the hydrogels reached swelling equilibrium at about 4 h in water, and the IPN silicone hydrogels with a hydrophobic network of HPSO indicated a slower water transport than that of the copolymerization hydrogel of DMA and TRIS. The hydrophobic network was finely dispersed in the hydrophilic network, and the increasing hydrophobic network of HPSO decreased the glass‐transition temperature of the IPN silicone hydrogels. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41399.     

Temperature‐responsive characteristics of poly(N‐isopropylacrylamide) hydrogels with macroporous structure

Macroporous poly(N‐isopropylacrylamide) (PNIPA) hydrogels were synthesized by free‐radical crosslinking polymerization in aqueous solution from N‐isopropylacrylamide monomer and N,N‐methylenebis (acrylamide) crosslinker using poly(ethylene glycol) (PEG) with three different number‐average molecular weights of 300, 600 and 1000 g mol^?1 as the pore‐forming agent. The influence of the molecular weight and amount of PEG pore‐forming agent on the swelling ratio and network parameters such as polymer–solvent interaction parameter (χ) and crosslinking density (ν_E) of the hydrogels is reported and discussed. Scanning electron micrographs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights and compositions of PEG during polymerization. At a temperature below the volume phase transition temperature, the macroporous hydrogels absorbed larger amounts of water compared to that of conventional PNIPA hydrogels, and showed higher equilibrated swelling ratios in aqueous medium. Particularly, the unique macroporous structure provides numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to external temperature changes during the swelling and deswelling process. These macroporous PNIPA hydrogels may be useful for potential applications in controlled release of macromolecular active agents. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of novel polyglycerol hydrogels containing L‐lactic acid groups as pendant acidic substituents: pH‐Responsive polyglycerol‐based hydrogels

Novel pH‐responsive polyglycerol (PG)‐based hydrogels were successfully synthesized through the reaction of epichlorohydrin with L ‐lactic acid (LLA) in the presence of sodium hydroxide (NaOH), and cetyltrimethylammonium bromide as a phase transfer catalyst at room temperature, followed by hydrolysis, polymerization, and crosslinking reactions. The resultant gel was characterized by carbon nuclear magnetic resonance spectroscopy, X‐ray photoelectron spectroscopy, and Fourier transform infrared measurement, and it was found that incorporated LLA was bound to PG network as a pendant acidic substituent by the hydroxyl group of LLA (PGL gel). The PGL hydrogels with different LLA contents and equilibrium swelling ratios (ESRs) were prepared by changing the feed ratios of materials. The results determined by chemical titration showed that under the applied conditions the efficiency of introducing the carboxyl group into PG network was about 86% and the amount of LLA in the hydrogel reached to about 17 wt %. The swelling behavior of the hydrogels in different environmental mediums was investigated, and the results showed that the hydrogels are pH‐, ionic strength‐, and cationic charge‐responsive. The hydrogels also have the reversible swelling/deswelling properties. These pH‐responsive PG‐based hydrogels will have potential applications in biomedical and related areas. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The structure characterization of thermosensitive poly(N‐isopropylacrylamide‐co‐2‐hydroxypropyl methacrylate) hydrogel

The goal of this work was to investigate a possible way of crosslinking polymer chains and the potential formation of intramolecular hydrogen bonds in thermosensitive poly(N‐isopropylacrylamide‐co‐2‐hydroxypropyl methacrylate) (p(NIPAM‐HPMet)) hydrogels obtained by radical polymerization. The chemical structure of the synthesized hydrogels was investigated by Fourier transform infrared (FTIR) spectroscopy and XRD. The FTIR spectrum confirmed the presence of hydrogen bonds formed between the chains in the copolymer. XRD analysis confirmed the amorphous ? crystalline structure of the copolymer. A three‐glass transition and two melting temperatures were detected by DSC. It was found that the addition of HPMet increased the glass transition and melting temperatures of the p(NIPAM‐HPMet) copolymer. The swelling transport mechanism of p(NIPAM‐HPMet) changed from non‐Fickian at 20 °C to case III or zero‐order time‐independent kinetics characterized by a linear mass uptake with time with increasing temperature at 40 °C. © 2013 Society of Chemical Industry     

Real‐time monitoring by proton relaxometry of radical polymerization reactions of acrylamide in aqueous solution

The potential of time‐domain nuclear magnetic resonance (TD‐NMR) for the real‐time monitoring of solution radical polymerizations is demonstrated. A model system composed of a redox‐pair initiator system, acrylamide as monomer and water as solvent was investigated. A second‐generation continuous wave free precession technique was employed to measure the longitudinal relaxation time constant (T₁) of the samples throughout the polymerization reactions. This parameter was shown to be sensitive to the reactant feed free‐radical enhancement of the water molecule relaxation time, making it a good probe to monitor monomer conversion in real time in an automated, non‐destructive fashion. It was found that the T₁ value was better than the transverse relaxation time constant (T₂) for describing the evolution of the polymerization reactions, due to its greater sensitivity to paramagnetic effects. The TD‐NMR signal variation observed was linked to the formation, propagation and termination steps of the radical polymerization kinetics scheme. These first results may contribute to the application of real‐time monitoring of radical polymerization reactions employing low‐cost and robust TD‐NMR spectrometers. © 2018 Society of Chemical Industry     

Degradation and initiation polymerization mechanism of α‐methylstyrene‐containing macroinitiators

Copolymers obtained from radical copolymerization of α‐methylstyrene (AMS) and glycidyl methacrylate (GMA) behave as macroinitiators, when heated in the presence of a second monomer, giving rise to block copolymers. The relevant degradation and initiation polymerization mechanism of the macroinitiators were studied. Thermal depropagation of the macroinitiators generated monomers, identified by ¹H‐NMR, photoionization mass spectroscopy and FT‐IR. According to the results of structure analysis by GPC, ESR and NMR spectroscopy, the AMS‐GMA (head‐head) and AMS‐AMS (head‐head) bonds in the macroinitiators are easily scissored providing free radicals when the temperature is above 80°C. The radicals lead to subsequent polymerization of the second monomer, and thereby block copolymers are formed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Rapid swelling and deswelling of semi‐interpenetrating network poly(acrylic acid)/poly(aspartic acid) hydrogels prepared by freezing polymerization

Hydrogels with semi‐interpenetrating networks composed of poly(acrylic acid) (PAAc) and poly(aspartic acid) (PASP) have great potential for pharmaceutical and biomedical applications. In this study, we aimed to synthesize semi‐interpenetrating PAAc/PASP hydrogels with improved swelling–deswelling properties via two‐step polymerization, in which the first step of polymerization was performed at 37 °C for 15 min and the second step, the freezing polymerization, was performed at ?20 °C for 24 h. The synthesized hydrogels were characterized with field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The swelling and deswelling behaviors of the hydrogels in response to the ionic strength of the buffer solution were investigated. The Schott's swelling kinetic model was used to elucidate the swelling behavior of the hydrogels. The swelling and deswelling rates of the hydrogels prepared via freezing polymerization were faster than those of the hydrogels prepared via conventional polymerization. This was attributed to the large mean pore size of the freeze‐polymerized hydrogels. The PAAc/PASP hydrogels that underwent freezing polymerization had better swelling–deswelling characteristics than the PAAc hydrogels. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43515.     

Behavior of quaternary ammonium salt photobase generators on initiating free radical photo‐polymerization

Series of quaternary ammonium tetraphenyl borates salt photobase generators (PBGs) were synthesized using p‐methoxyphenacylmethylene and 2‐naphthoymethylene as chromophores, and triethylene diamine, pyridine or 3‐methyl pyridine as tertiary amine. The kinetics for polymerization of trimethylolpropane triacrylate (TMPTA) monomer using PBGs as free radical photo‐initiator was monitored by differential photo‐calorimeter (DPC). It was found that all the quaternary ammonium tetraphenyl borate salt photobase generators synthesized could initiate free radical polymerization of the acrylate monomer TMPTA by exposure to UV irradiation, but the activity was relatively low. Addition of a small amount of polar solvent to the system could largely increase the polymerization rate and final conversion. Photo‐polymerization was also improved by increasing light intensity or raising reaction temperature. PBGs with p‐methoxyphenacylmethylene as chromophore had higher absorbance at around 280 nm and showed higher activity in initiating photo‐polymerization than those with N‐(2‐naphthoylmethyl) as chromophore. Copyright © 2006 Society of Chemical Industry     

Effect of hydrophobic monomer on the synthesis and swelling behaviour of a collagen‐graft‐poly[(acrylic acid)‐co‐(sodium acrylate)] hydrogel

BACKGROUND: Graft polymerization of vinylic monomers onto natural backbones is an efficient approach for the synthesis of natural‐based superabsorbents. The nature of the monomers will affect the swelling behaviour of the superabsorbents. Here, a novel superabsorbent was synthesized through grafting of acrylic acid onto collagen in the presence of hydrophobic styrene as co‐monomer. Subsequently, the effect of styrene on the swelling behaviour of the superabsorbent was studied. RESULTS: The highly swelling superabsorbent was prepared by introducing styrene into a collagen‐graft‐poly(acrylic acid) hydrogel. By inclusion of styrene monomer, the swelling capacity of the hydrogel was increased; this is discussed according to the network composition. The effect of swelling media (salt solutions and various pH values) was investigated. The results of absorbency under load showed that hydrogels containing phenyl groups exhibit better behaviour; however, by introducing styrene, the rate of water uptake and resistance to water holding under heating was reduced. Scanning electron micrographs of hydrogels revealed a decrease in porosity on using styrene. CONCLUSION: Inclusion of styrene monomer in the ionic superabsorbent caused high swelling capacity with better absorbency under load. This can be used to prepare highly swelling superabsorbents with good mechanical properties. The pH reversibility of the synthesized superabsorbent makes it a candidate for use in the controlled release of drugs and in agrochemicals. Copyright © 2008 Society of Chemical Industry     

Reentrant phase transition and fast responsive behaviors of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels prepared in poly(ethylene glycol) solutions

Macroporous temperature‐sensitive poly {N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels were synthesized by free‐radical crosslinking polymerization of the monomer N‐[3‐(dimethylaminopropyl)] methacrylamide and the crosslinker N,N′‐methylenebisacrylamide in aqueous solutions at 22°C. Poly(ethylene glycol) (PEG) with a molecular weight of 1000 g/mol was used as the pore‐forming agent during the polymerization reaction. The concentration of PEG in the polymerization solutions was varied between 0 and 18 wt %, whereas the crosslinker (N,N′‐methylenebisacrylamide) concentration was fixed at 2 wt % (with respect to the monomer). The effects of the PEG concentration on the thermo‐induced phase‐transition behavior and the chemical structure, interior morphology, and swelling/deswelling kinetics were investigated. Normal‐type hydrogels were also prepared under the same conditions without PEG. An interesting feature of the swelling behavior of both the normal‐type and macroporous hydrogels was the reentrant phase transition, in which the hydrogels collapsed once and reswelled as the temperature was continuously increased. Scanning electron micrographs revealed that the interior network structure of the hydrogels prepared in PEG solutions became more porous with an increase in the PEG concentration in the polymerization solution. This more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved responsive rate to external temperature changes during the deswelling and swelling processes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of nicotine‐selective hydrogels

In this study, P(NIPAAm‐MAm)/A, which is a new smart polymer on which the temperature sensitivity of N‐isopropyl acrylamide monomer and pH sensitivities of methacrylic acid (MA) and itaconic acid (IA) monomers unite, were prepared by free radical polymerization. The influence of crosslinkers on the properties of polymer and adsorption was studied using two different crosslinkers. These new environmentally multistimuli responsive hydrogels were characterized by FTIR, TG, and DSC. In order to determine the swelling behaviors of polymers, the equilibrium swelling studies were carried out at different temperatures and pHs. With the aim of studying the usability of the prepared polymers in the adsorption of nicotine and its pharmaceutical derivatives, the effects of temperature, pH, and adsorbent mass on adsorption equilibrium were studied. POLYM. ENG. SCI. 56:1004–1011, 2016. © 2016 Society of Plastics Engineers     

Synthesis of hydrogels by polymerization of itaconic acid–choline chloride deep eutectic solvent

Itaconic acid (IA)–choline chloride (CC) deep eutectic solvents (DES) were prepared and characterized by NMR, TGA, and DSC. Poly(itaconic acid–co–bisacrylamide) hydrogels were synthesized by in situ polymerization‐crosslinking of the DES. For comparison, the hydrogels were also prepared in water under the same process conditions, that is, temperature, time, initial concentration of the monomer, the initiator, and N,N′‐methylenebisacrylamide (BAA) as the cross‐linking agent. Chemical structure of the polymers was proved by elemental analysis and FTIR. The values of insoluble gel fraction and water swelling of obtained hydrogels suggest that polymers prepared in DES have higher cross‐link density. Preliminary comparative studies of polymerization of IA in water and in DES medium indicated higher polymerization rate resulting from the presence of the choline salt, what might explain properties of the hydrogels prepared in DES. This study shows that DES can be used both as a solvent and catalyst in free‐radical polymerization processes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40608.     

Synthesis of poly(cyclohexene oxide)‐block‐polystyrene by combination of radical‐promoted cationic polymerization,atom transfer radical polymerization and click chemistry

The combination of radical‐promoted cationic polymerization, atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of poly(cyclohexene oxide)‐block‐polystyrene (PCHO‐b‐PSt). Alkyne end‐functionalized poly(cyclohexene oxide) (PCHO‐alkyne) was prepared by radical‐promoted cationic polymerization of cyclohexene oxide monomer in the presence of 1,2‐diphenyl‐2‐(2‐propynyloxy)‐1‐ethanone (B‐alkyne) and an onium salt, namely 1‐ethoxy‐2‐methylpyridinium hexafluorophosphate, as the initiating system. The B‐alkyne compound was synthesized using benzoin photoinitiator and propargyl bromide. Well‐defined bromine‐terminated polystyrene (PSt‐Br) was prepared by ATRP using 2‐oxo‐1,2‐diphenylethyl‐2‐bromopropanoate as initiator. Subsequently, the bromine chain end of PSt‐Br was converted to an azide group to obtain PSt‐N₃ by a simple nucleophilic substitution reaction. Then the coupling reaction between the azide end group in PSt‐N₃ and PCHO‐alkyne was performed with Cu(I) catalysis in order to obtain the PCHO‐b‐PSt block copolymer. The structures of all polymers were determined. Copyright © 2010 Society of Chemical Industry     

Synthesis of amphiphilic heteroarm star‐shaped polymer via free radical polymerization using polyfunctional chain transfer agent and its self‐assembly behavior

Amphiphilic heteroarm star‐shaped polymers have important theoretical and practical significance. In this work, amphiphilic heteroarm star‐shaped polymer was synthesized by the use of polyfunctional chain transfer agent via sequential free radical polymerization in two steps. First, conventional free radical polymerization of methyl methacrylate (MMA) initiated by 2,2′‐azobis (isobutyronitrile) (AIBN) was carried out in the presence of polyfunctional chain transfer agent, pentaerythritol‐tertrakis (3‐mercaptopropinate) (PETMP). At appropriate monomer conversion, about two‐arm s‐PMMA having two residual thiol groups at the chain center was obtained. Second, the s‐PMMA obtained above was used as macro‐chain‐transfer agent for free radical polymerization of acrylic acid (AA). The heteroarm star‐shaped polymer with the hydrophobic PMMA segment and the hydrophilic PAA segment was obtained. The successful synthesis of heteroarm star‐shaped polymers, (PMMA)₂(AA)₂, was confirmed by ¹H‐NMR and its self‐assembly behavior in different solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

pH/temperature‐responsive semi‐IPN hydrogels composed of alginate and poly(N‐isopropylacrylamide)

Amino semitelechelic poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by radical polymerization with aminoethanethiol hydrochloride as a chain‐transfer agent. Semi‐interpenetrating polymer network (semi‐IPN) hydrogels, composed of alginate and amine‐terminated PNIPAAm, were prepared by crosslinking with calcium chloride. From the swelling behaviors of semi‐IPNs at various pH's and Fourier transform infrared spectra at high temperatures, the formation of a polyelectrolyte complex was confirmed from the reaction between carboxyl groups in alginate and amino groups in modified PNIPAAm. Semi‐IPN hydrogels reached an equilibrium swelling state within 24 h. The water state in hydrogels, investigated by differential scanning calorimetry, showed that sample CAN55 [alginate/PNIPAAm (w/w) = 50/50] exhibited the lowest equilibrium water content and free water content among the hydrogels tested, which was attributed to its more compact structure compared to other samples and the high content of interchain bonding within the hydrogels. Alginate/PNIPAAm semi‐IPN hydrogels exhibited a reasonable sensitivity to the temperature, pH, and ionic strength of swelling medium. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1128–1139, 2002