共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
水性高分子纳米微球和纳米胶囊——水性树脂的研究及其在工业上的应用 总被引:3,自引:0,他引:3
水性高分子纳米微球和纳米胶囊是利用高分子材料制备的一种纳米微粒,是在中国-日本合作项目,中国-加拿大合作项目,天津市重大攻关项目,国家基金项目和国家高技术航天领域863-2的研究基础上建立的技术平台。它是将荷电高分子经纳米化技术处理制备的超微分散体或超微乳液。其粒径尺寸小、分布窄,一般在20-80纳米(如下图所示)。 相似文献
3.
纳米级CaCO3填充LDPE复合材料的研究 总被引:3,自引:0,他引:3
研究了高分子表面处理剂处理纳米CaCO3填充LDPE复合膜的力学性能。结果表明,由于纳米粒子的表面效应以及高分子表面处理剂的作用,加入少量的纳米粒子,复合体系的拉伸强度、断裂伸长率和直角撕裂强度均有不同程度的增加。 相似文献
4.
5.
综述了高分子纳米复合材料的发展研究现状,将高分子纳米复合材料的制备方法分为四类:纳米单元与高分子直接共混;在高分子基体中原位生成纳米单元;在纳米单元存在下单体分子原位聚合生成高分子及纳米单元和高分子同时生成。介绍了高分子纳米复合材料的表征技术及应用前景。 相似文献
6.
纳米碳管(Carbon Nanotube)是1991年日本的Ijima首先发现的一种直径在小于100nm,长度可达到微米量级的具有单层壁或多层壁的空心、管状的碳的存在形式。这一发现将纳米结构的研究推向了一个高潮。在高分子中,纳米碳管及具有类似结构的纳米碳纤维因其纳米、纤维状的结构而具有了潜在的增强、增韧等特性,因而成为最近几年来高分子研究领域中的一个热点。--译者 相似文献
7.
8.
9.
10.
11.
高分子合金技术及其理论研究进展 总被引:5,自引:0,他引:5
高分子合金是高分子材料科学与工程中十分活跃的研究领域。讨论了在高分子合金研究中倍受人们关注的制备技术,增容剂和增韧机理等问题,了这一领域中近年来的进展。 相似文献
12.
聚合物增韧机理研究进展 总被引:5,自引:1,他引:4
吕坤 《现代塑料加工应用》2000,12(4):50-53,64
聚合物增韧是高分子材料科学与工程加十分活跃的研究领域。本文介绍了橡胶增韧机理的发展以及研究进展,同时讨论了刚性有机粒子(ROF)增韧机理和刚性无机粒子(RIF)增韧的机理。 相似文献
13.
14.
15.
In previous papers, interpenetrating polymer networks were shown to display a cellular structure. The phase domain size of polymer II was shown to depend inversely on the crosslink density of polymer I. The present paper presents a semiempirical derivation of equations which show quantitatively the dependence of the phase domain size of polymer II on the crosslinking density of polymer I, and also on the interfacial energy and the overall composition. If polymer II is linear, the dependence on the molecular weight of polymer II is also included. The values of the phase domain sizes so estimated are compared with experimental results. While theory and experiment yield good agreement, the semiempirical nature of the equations must be borne in mind. 相似文献
16.
原子力显微镜(AFM)作为一种新型纳米显微技术,具有分辨率高、样本制作方便等优点,在高分子研究中获得广泛的应用,本文综述了其在高分子研究领域中的一些应用进展。 相似文献
17.
The contribution of neutron scattering to polymer science is reviewed. A summary is given of the theory of neutron scattering followed by a review of the literature. Particular emphasis is placed on the use of small angle neutron scattering to observe the conformation of polymer chains in bulk polymers and concentrated polymer solutions and on quasi elastic neutron scattering to measure the dynamics of polymer chains. 相似文献
18.
The influence of shear induced coalescence on the origination of morphologies in polymer blending processes is investigated both theoretically and experimentally. In the theoretical part a route is proposed to estimate the fraction of collisions between disperse phase domains in simple shear flow that result in an actual coalescence. It was shown that under polymer blending conditions this “coalescence probability” is only substantial if the polymer/polymer interfaces exhibit a high degree of mobility. In the experimental part, the phenomenon of gravity induced droplet/planar interface coalescence is utilized to show the high degree of mobility of molten polymer interfaces. Seoul experiments on the relation between domain size and disperse phase concentration in polymer blends prepared on a single screw extruder were carried out. For extremely low concentration (<½ %) the domain size could be predicted satisfactorily by means of Taylor's classical criterion for Newtonian liquids, while at higher concentration coalescence increased the average domain size manifold. 相似文献
19.
20.
简要介绍了超临界二氧化碳的性质及其在聚合物科学中的应用优势,结合目前国内外超临界流体技术在聚合物加工中应用的最新进展,重点介绍了超临界流体技术在聚合物结晶,发泡聚合物的制备,共混聚合物的加工和共混聚合物膜的相分离中的应用。 相似文献