Synthesis and characterization of fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels

BACKGROUND: A considerable amount of research has been focused on smart hydrogels that can respond to external environmental stimuli, especially temperature and pH. In this study, fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels were prepared by free radical copolymerization in aqueous solution using poly(ethylene glycol) (PEG) as a pore‐forming agent. RESULTS: Swelling studies showed that the hydrogels produced had both temperature and pH sensitivity. The deswelling kinetics at high temperature demonstrated that the shrinking rates were influenced by the addition of the pore‐forming agent and the amount of acrylic acid in the initial total monomers. The deswelling curves in low‐buffer solutions had two stages. Pulsatile swelling studies indicated that the PEG‐modified hydrogels were superior to the normal ones. These different swelling properties were further confirmed by the results of scanning electron microscopy. CONCLUSION: Such fast responsive thermo‐ and pH‐sensitive hydrogels are expected to be useful in biomedical fields for stimuli‐responsive drug delivery systems. Copyright © 2008 Society of Chemical Industry     

Preparation and application in drug controlled delivery of pH‐sensitive P(CE‐co‐DMAEMA‐co‐MEG) hydrogel

A pH‐sensitive hydrogel [P(CE‐co‐DMAEMA‐co‐MEG)] was synthesized by the free‐radical crosslinking polymerization of N,N‐dimethylaminoethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether methacrylate(MPEG‐Mac) and methoxyl poly(ethylene glycol)‐poly(caprolactone)‐methacryloyl methchloride (PCE‐Mac). The effects of pH and monomer content on swelling property, swelling and deswelling kinetics of the hydrogels were examined and hydrogel microstructures were investigated by SEM. Sodium salicylate was chosen as a model drug and the controlled‐release properties of hydrogels were pilot studied. The results indicated that the swelling ratios of the gels in stimulated gastric fluids (SGF, pH = 1.4) were higher than those in stimulated intestinal fluids (SIF, pH = 7.4), and followed a non‐Fickian and a Fickian diffusion mechanism, respectively. In vitro release studies showed that its release rate depends on different swelling of the network as a function of the environmental pH and DMAEMA content. SEM micrographs showed homogenous pore structure of the hydrogel with open pores at pH 1.4. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40737.     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of drug loading on the properties of temperature‐responsive polyester–poly(ethylene glycol)–polyester hydrogels

Hydrogels that can undergo gelation upon injection in vivo are promising systems for the site‐specific delivery of drugs. In particular, some thermo‐responsive gels require no chemical additives but simply gel in response to a change from a lower temperature to physiological temperature (37 °C). The gelation mechanism does not involve covalent bonds, and it is possible that incorporation of drugs into the hydrogel could disrupt gelation. We investigated the incorporation of drugs into thermo‐responsive hydrogels based on poly(?‐caprolactone‐co‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(?‐caprolactone‐co‐lactide) (PCLA–PEG–PCLA). Significant differences in properties and in the response to incorporation of the anti‐inflammatory drug celecoxib (CXB) were observed as the PEG block length was varied from 1500 to 3000 g mol^?1. Linear viscoelastic moduli of a PCLA–PEG–PCLA hydrogel containing a 2000 g mol^?1 PEG block were least affected by the incorporation of CXB and this gel also exhibited the slowest release of CXB, so the incorporation of phenylbutazone, methotrexate, ibuprofen, diclofenac and etodolac was also investigated for this hydrogel. Different drugs resulted in varying degrees of syneresis of the hydrogels, suggesting that they interact with the polymer networks in different ways. In addition, the drugs had varying effects on the viscoelastic and compressive moduli of the gels. The results showed that the effects of drug loading on the properties of thermo‐responsive hydrogels can be substantial and depend on the drug. For applications such as intra‐articular drug delivery, in which the mechanical properties of the hydrogel are important, these effects should thus be studied on a case‐by‐case basis. © 2019 Society of Chemical Industry     

Dual pH‐ and thermal‐responsive nanocomposite hydrogels for controllable delivery of hydrophobic drug baicalein

Hydrogels have been widely used as mild biomaterials due to their bio‐affinity, high drug loading capability and controllable release profiles. However, hydrogel‐based carriers are greatly limited for the delivery of hydrophobic payloads due to the lack of hydrophobic binding sites. Herein, nano‐liposome micelles were embedded in semi‐interpenetrating poly[(N‐isopropylacrylamide)‐co‐chitosan] (PNIPAAm‐co‐CS) and poly[(N‐isopropylacrylamide)‐co‐(sodium alginate)] (PNIPAAm‐co‐SA) hydrogels which were responsive to both temperature and pH, thereby establishing tunable nanocomposite hydrogel delivery systems. Nano‐micelles formed via the self‐assembly of phospholipid could serve as the link between hydrophobic drug and hydrophilic hydrogel due to their special amphiphilic structure. The results of transmission and scanning electron microscopies and infrared spectroscopy showed that the porous hydrogels were successfully fabricated and the liposomes encapsulated with baicalein could be well contained in the network. In addition, the experimental results of response release in vitro revealed that the smart hydrogels showed different degree of sensitiveness under different pH and temperature stimuli. The results of the study demonstrate that combining PNIPAAm‐co‐SA and PNIPAAm‐co‐CS hydrogels with liposomes encapsulated with hydrophobic drugs is a feasible method for hydrophobic drug delivery and have potential application prospects in the medical field. © 2018 Society of Chemical Industry     

Synthesis and characterization of cholic acid‐containing biodegradable hydrogels by photoinduced copolymerization

A cholic acid (CA)‐containing biodegradable hydrogel (PLA‐PEG‐PLA‐co‐MACAH) was synthesized from the photoinduced copolymerization of a CA‐modified methacrylate monomer (MACAH), bearing a spacer of hexane‐1,6‐diol spacer between the methacryloyl and the cholanoate moieties, and a macromonomer (PLA‐PEG‐PLA‐DA), bearing two acryloyl end groups derived from a poly(lactic acid)‐b‐poly(ethylene glycol)‐b‐poly(lactic acid) triblock copolymer. The structure of MACAH was confirmed by FTIR, ¹H‐NMR, and MS. The hydrogel PLA‐PEG‐PLA‐co‐MACAH was characterized by scanning electron microscopy and X‐ray diffraction. The experiment results showed that the swelling ratios of the hydrogels decreased with the increase of the CA fraction. The investigation on the in vitro degradation of the hydrogel showed that the CA‐containing hydrogels degraded much slower than the hydrogels without CA component. The bioactivity of the synthesized hydrogels was assessed by the simulated body fluid method. The observed formation of hydroxyapatite on the scaffold of the hydrogels indicated that the hydrogels possess good bioactivity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Highly efficient adsorbent for organic dyes based on a temperature‐ and pH‐responsive multiblock polymer

The self‐assembly behavior of amphiphilic block copolymers in selective solutions has many applications in environmentally responsive polymer materials. In this article, we report on a new amphiphilic, temperature and pH dual‐responsive poly[2‐dimethylaminoethyl methacrylate‐co‐(methyl methacrylate)]‐b‐poly[poly(ethylene glycol) methacrylate] [P(DMAEMA‐co‐MMA)‐b‐PPEGMA], which was synthesized via reversible addition–fragmentation chain‐transfer polymerization. The structure, self‐assembly behaviors, and process of organic dye adsorption were characterized by ¹H‐NMR, ultraviolet–visible absorbance spectroscopy, and DLS measurements. P(DMAEMA‐co‐MMA)‐b‐PPEGMA was proven to be an outstanding adsorbent with excellent reversibility. Methyl red was released from the micelles as the pH value of the solution was adjusted to 4, and it could also be encapsulated again when the pH value was adjusted to 7.4 because of the sensitive pH‐responsive ability. It is promising that the triblock polymer had a positive effect on dye adsorption for environmental protection. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46626.     

Preparation of quadruple responsive polymeric micelles combining temperature‐, pH‐, redox‐, and UV‐responsive behaviors and its application in controlled release system

A novel series of quadruple responsive copolymers, poly(ethylene glycol)‐ss‐[poly(dimethylaminoethyl methacrylate)‐co‐poly(2‐nitrobenzyl methacrylate)] [PEG‐ss‐(PDMAEMA‐co‐PNBM)], were synthesized via atom transfer radical polymerization mediated by home‐made PEG‐based macro‐initiator labeled with disulfides. The obtained copolymers could self‐assemble in aqueous solution forming micelles with the disulfide bridge linking the hydrophilic coronas (PEG) and the hydrophobic cores (PDMAEMA‐co‐PNBM). Investigation on the resulted micelles indicated that the micelles could respond to various stimuli, that is, temperature, pH, the presence of dithiothreitol (DTT), and UV irradiation. Moreover, the responsive behavior of the micelles depends on the type of stimuli, that is, temperature change causes size change of the micelles, while UV irradiation leads to dissolution of the self‐assembled structures. Such stimulus‐dependent responsive behavior could be applied in smart materials that deal with multi‐tasks or in the construction of complex logic gate. The potential application of the multi‐responsive micelles in cargo release system was also evaluated using Nile Red (NR) as model molecule. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46675.     

Design of hemocompatible poly(DMAEMA‐co‐PEGMA) hydrogels for controlled release of insulin

This works aims at (i) studying the antiadhesive properties and the hemocompatibility of poly[2‐(dimethylamino)ethyl methacrylate]‐co‐poly[(ethylene glycol)methacrylate] [poly(DMAEMA‐co‐PEGMA)] copolymers and (ii) investigating the insulin delivery kinetics through hydrogels at physiological pH. A series of poly(DMAEMA‐co‐PEGMA) hydrogels have been synthesized, and their controlled composition was confirmed by X‐ray photoelectron spectroscopy. Then, antibiofouling properties of hydrogels—fibrinogen, erythrocytes, and thrombocytes adhesion—are correlated to their molecular compositions through their hydrophilic properties. As DMAEMA/PEGMA ratio of 70/30 (D70) offers the best compromise between pH sensitivity and hemocompatibility, it is selected for investigating the kinetic rate of insulin release at physiological pH, and the diffusion coefficient of insulin in gel is found to be 0.64 × 10^?7 cm² s^?1. Overall, this study unveils that poly(DMAEMA‐co‐PEGMA) copolymers are promising hemocompatible materials for drug delivery systems. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42365.     

A novel temperature and pH dual‐responsive hybrid hydrogel with polyhedral oligomeric silsesquioxane as crosslinker: synthesis,characterization and drug release properties

Octavinyl polyhedral oligomeric silsesquioxane (OVPS) is used as the crosslinker instead of N,N′‐methylenebisacrylamide (BIS) to copolymerize with 2‐(dimethylamino)ethyl methacrylate (DMAEMA) or DMAEMA and N‐isopropylacrylamide (NIPAM) to prepare hybrid hydrogels: P(OVPS‐co‐DMAEMA) and P(OVPS‐co‐DMAEMA‐co‐NIPAM). The prepared hydrogels are transparent and show dual response to temperature and pH. The hydrogels were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis and tensile tests. Their mechanical properties, swelling ratio, deswelling and reswelling behaviors as well as drug release properties were investigated. The results indicate that OVPS can be incorporated into polymer networks in proportion to feed ratios. The P(OVPS‐co‐DMAEMA) hydrogel exhibits more homogeneous interior structure, higher swelling ratio and faster response than the conventional hydrogel prepared with BIS. Moreover, the incorporation of OVPS enhances the compression and tensile properties of the hydrogels. The feed ratios of OVPS and NIPAM have a great effect on volume phase transition temperature, thermal sensitivity, swelling behavior, mechanical properties and drug release properties of the hybrid hydrogels. The prepared dual‐responsive OVPS‐containing hydrogels are expected to be used as biomedical materials in drug release and tissue engineering. © 2014 Society of Chemical Industry     

Temperature and pH responsive hydrogels based on polyethylene glycol analogues and poly(methacrylic acid) via click chemistry

A novel temperature responsive copolymer, poly[2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol)methacrylate‐co‐N‐hydroxymethyl acrylamide] [P(MEO₂MA‐co‐OEGMA‐co‐HMAM)], was synthesized by atom transfer radical polymerization. pH responsive poly(methacrylic acid) (PMAA) was synthesized by reversible addition‐fragmentation chain transfer polymerization. After the hydroxyl groups on P(MEO₂MA‐co‐OEGMA‐co‐HMAM) were transformed into azide groups and the carboxyl groups on PMAA were transformed into alkyne groups respectively, a novel temperature and pH responsive hydrogel was fabricated by click chemistry between the azide‐P(MEO₂MA‐co‐OEGMA‐co‐HMAM) and alkyne‐PMAA in the presence of CuSO₄ and sodium ascorbate in aqueous solution. The rheological kinetics of gel formation demonstrated that gelation had commenced within 5 min at 25 °C, since then the storage modulus (G′) was higher than the loss modulus (G″). SEM images of hydrogel morphology and the swelling ratios of hydrogel at different temperatures and pH proved that the formed hydrogel had temperature and pH sensitivities. Bovine serum albumin was used as a model to evaluate the sustained release of the hydrogel; the results indicated that the hydrogel was a promising candidate for controlling protein drug delivery. © 2015 Society of Chemical Industry     

Relaxational behavior and swelling‐pH master curves of poly[(diethylaminoethyl methacrylate)‐graft‐(ethylene glycol)] hydrogels

Poly[(diethylaminoethyl methacrylate)‐graft‐(ethylene glycol)] hydrogels were prepared with a molar ratio of 10:1 of diethylaminoethyl methacrylate to poly(ethylene glycol) of number‐average molecular weights (M_n) 200, 400 and 1000 g mol^?1 using tetra(ethylene glycol) dimethacrylate to give a crosslinking ratio between 0.5 and 4.0 %. Glucose oxidase and catalase were immobilized in the matrix during polymerization. The maximum enzyme loading used was 6.6 × 10^?4 g of glucose oxidase per g of polymer. The equilibrium and dynamic swelling properties of these hydrogels were investigated. The pH‐dependent equilibrium swelling characteristics showed a sharp transition between the swollen and the collapsed state at pH 7.0. The dynamic response of the hydrogel discs to pH was analyzed in pulsatile pH conditions. The effects of particle size, crosslinking and molecular weight of poly(ethylene glycol) (PEG) on the dynamic swelling response were investigated. The pulsatile nature of the response was analyzed using Boltzmann superposition. Swelling–pH master curves were obtained. Copyright © 2004 Society of Chemical Industry     

The adsorption behaviors of the multiple stimulus‐responsive poly(ethylene glycol)‐based hydrogels for removal of RhB dye

In this article, the multiple stimulus‐responsive organic/inorganic hybrid hydrogels by combining poly(2‐(2‐methoxyethoxy) ethyl methacrylate‐co‐oligo (ethylene glycol) methacrylate‐co‐acrylic acid) (PMOA) hydrogel with magnetic attapulgite/Fe₃O₄ (AT‐Fe₃O₄) nanoparticles were applied to the removal of Rhodamine B (RhB) dye from wastewater. The adsorption of RhB by the hydrogels was carried out under different external environmental, such as pH, temperature and magnetic‐field. The results showed that the hydrogels still possessed temperature, pH and magnetic‐field sensitivity during the adsorption process, which indicated that the adsorption could be controlled by the hydrogels responsive. The dye adsorption had a significant increment at 30°C and the removal of RhB could reach to over 95%. Besides, the low pH values were also favorable for the RhB adsorption, the removal was over 90% at pH = 4.56. Kinetic studies showed that the pseudo‐second order kinetic model well fitted the experimental data. The rate constant of adsorption was 0.0379 g/mg min. Langmuir and Freundlich isotherm models were applied to the equilibrium adsorption for describing the interaction between sorbent and adsorbate. The maximum K_L and K_F were 2.23 (L/g) and 0.87 (mg/g) at 30°C, respectively. Under the external magnetic‐field, the adsorption rate significantly increased within 250 min and the hydrogels could be separated easily from wastewater. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42244.     

Fluconazole release through semi‐interpenetrating polymer network hydrogels based on chitosan,acrylic acid,and citraconic acid

Semi‐interpenetrating polymer network hydrogels with different compositions of chitosan (Cs), acrylic acid, and citraconic acid were synthesized via free‐radical polymerization with ethylene glycol dimethacrylate as a crosslinker. The variations of the swelling percentages of the hydrogels with time, temperature, and pH were determined, and Cs–poly(acrylic acid) (PAA) hydrogels were found to be most swollen at pH 7.4 and 37°C. Scanning electron micrographs of Cs–PAA and Cs–P(AA‐co‐CA)‐1 (Cs‐poly(acrylicacid‐co‐citraconir acid)^?1) were taken to observe the morphological differences in the hydrogels. Although the less swollen hydrogel, Cs–P(AA‐co‐CA)‐1, had a sponge‐type structure, the most swollen hydrogel, Cs–PAA, displayed a uniform porous appearance. Fluconazole was entrapped in Cs–P(AA‐co‐CA)‐1 and Cs–PAA hydrogels, and the release was investigated at pH 4.0 and 37°C. The kinetic release parameters of the hydrogels (the gel characteristic constant and the swelling exponent) were calculated, and non‐Fickian diffusion was established for Cs–PAA, which released fluconazole much more slowly than the Cs–P(AA‐co‐CA)‐1 hydrogel. A therapeutic range was reached at close to 1 h for both hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

pH‐sensitive swelling and release behaviors of anionic hydrogels for intelligent drug delivery system

The pH‐sensitive swelling and release behaviors of the anionic P(MAA‐co‐EGMA) hydrogels were investigated as a biological on–off switch for the design of an intelligent drug delivery system triggered by external pH changes. There was a drastic change of the equilibrium weight swelling ratio of P(MAA‐co‐EGMA) hydrogels at a pH of around 5, which is the pK_a of poly (methacrylic acid) (PMAA). At a pH below 5, the hydrogels were in a relatively collapsed state but at a pH higher than 5, the hydrogels swelled to a high degree. When the molecular weight of the pendent poly(ethylene glycol) (PEG) of the P(MAA‐co‐EGMA) increased, the swelling ratio decreased at a pH higher than 5. The pK_a values of the P(MAA‐co‐EGMA) hydrogels moved to a higher pH range as the pendent PEG molecular weight increased. When the feed concentration of the crosslinker of the hydrogel increased the swelling ratio of the P(MAA‐co‐EGMA) hydrogels decreased at a pH higher than 5. In release experiments using Rhodamine B (Rh‐B) as a model solute, the P(MAA‐co‐EGMA) hydrogels showed a pH‐sensitive release behavior. At low pH (pH 4.0) a small amount of Rh‐B was released while at high pH (pH 6.0) a relatively large amount of Rh‐B was released from the hydrogels. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

pH and thermo‐responsive poly(N‐isopropylacrylamide) copolymer grafted to poly(ethylene glycol)

pH and thermo‐responsive graft copolymers are reported where thermo‐responsive poly(N‐isopropylacrylamide) [poly(NIPAAm), poly A ], poly(N‐isopropylacrylamide‐co‐2‐(diethylamino) ethyl methacrylate) [poly(NIPAAm‐co‐DEA), poly B ], and poly(N‐isopropylacrylamide‐co‐methacrylic acid) [poly(NIPAAm‐co‐MAA), poly C ] have been installed to benzaldehyde grafted polyethylene glycol (PEG) back bone following introducing a pH responsive benzoic‐imine bond. All the prepared graft copolymers for PEG‐g‐poly(NIPAAm) [ P‐N1 ], PEG‐g‐poly(NIPAAm‐co‐DEA) [ P‐N2 ], and PEG‐g‐poly(NIPAAm‐co‐MAA) [ P‐N3 ] were characterized by ¹H‐NMR to assure the successful synthesis of the expected polymers. Molecular weight of all synthesized polymers was evaluated following gel permeation chromatography. The lower critical solution temperature of graft copolymers varied significantly when grafted to benzaldehyde containing PEG and after further functionalization of copolymer based poly(NIPAAm). The contact angle experiment showed the changes in hydrophilic/hydrophobic behavior when the polymers were exposed to different pH and temperature. Particle size measurement investigation by dynamic light scattering was performed to rectify thermo and pH responsiveness of all prepared polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of novel pH‐responsive poly(2‐hydroxylethyl methacrylate‐co‐N‐allylsuccinamic acid) hydrogels for drug delivery

In this study, N‐allylsuccinamic acid (NASA) was synthesized in a single step with a yield of 85%. Carboxylic acid containing NASA was characterized through Fourier transform infrared (FTIR) radiation and ¹H‐NMR and ¹³C‐NMR analysis, and then it was used for synthesis of poly(2‐hydroxylethyl methacrylate‐co‐N‐allylsuccinamic acid) [p(HEMA‐co‐NASA)] hydrogels. The structure of the obtained pH‐responsive p(HEMA‐co‐NASA) hydrogels were characterized with FTIR spectroscopy and scanning electron microscopy analysis, and their swelling characterization was carried out under different drug‐release conditions. In the application step of the study, the hydrogels were used for the in vitro release of vitamin B12 and Rhodamine 6G, which were selected as model drugs. We determined that the hydrogels used as a drug‐delivery matrix could release the drug they had absorbed under different release conditions (phosphate‐buffered saline, 0.9% NaCl, and pH 1.2) at high rates for time periods of up to 24 h. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39660.     

Smart carboxymethylchitosan hydrogels that have thermo‐ and pH‐responsive properties

Thermo‐responsive poly(N‐isopropylacrylamide) (poly(NIPAAm)) and pH‐responsive poly(N,N′‐diethylaminoethyl methacrylate) (poly(DEAEMA)) polymers were grafted to carboxymethylchitosan (CMC) via radical polymerization to form highly water swellable hydrogels with dual responsive properties. Ratios of CMC, NIPAAm to DEAEMA used in the reactions were finely adjusted such that the thermo and pH responsiveness of the hydrogels was retained. Scanning electron microscopy (SEM) indicated the formation of an internal porous structure for the swollen CMC hydrogels upon incorporation of poly(NIPAAm) and poly(DEAEMA). Effect of temperature and pH changes on water swelling properties of the hydrogels was investigated. It was found that the water swelling of the hydrogels was enhanced when the solution pH was under basic conditions (pH 11) or the temperature was below its lower critical solution temperature (LCST). These responsive properties can be used to regulate releasing rate of an entrapped drug from the hydrogels, a model drug, indomethacin was used to demonstrate the release. These smart and nontoxic CMC‐based hydrogels show great potential for use in controlled drug release applications with controllable on‐off switch properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41505.     

Synthesis and characterization of a novel stimuli‐responsive magnetite nanohydrogel based on poly(ethylene glycol) and poly(N‐isopropylacrylamide) as drug carrier

A novel stimuli‐responsive magnetite nanohydrogel (MNHG), namely [poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide‐co‐maleic anhydride)₂]‐graft‐poly(ethylene glycol)/Fe₃O₄ [PEG‐b‐(PNIPAAm‐co‐PMA)₂]‐g‐PEG/Fe₃O₄, was successfully developed. For this purpose, NIPAAm and MA monomers were block copolymerized onto PEG‐based macroinitiator through atom transfer radical polymerization technique to produce PEG‐b‐(PNIPAAm‐co‐PMA)₂. The synthesized Y‐shaped terpolymer was crosslinked through the esterification of maleic anhydride units using PEG chains to afford a hydrogel. Afterward, magnetite nanoparticles were incorporated into the synthesized hydrogel through the physical interactions. The chemical structures of all synthesized samples were characterized using Fourier transform infrared and proton nuclear magnetic resonance spectroscopies. Morphology, thermal stability, size, and magnetic properties of the synthesized MNHG were investigated. In addition, the doxorubicin hydrochloride loading and encapsulation efficiencies as well as stimuli‐responsive drug release ability of the synthesized MNHG were also evaluated. The drug‐loaded MNHG at physiological condition exhibited negligible drug release values. In contrast, at acidic (pH 5.3) condition and a little bit higher temperature (41 °C) the developed MNHG showed higher drug release values, which qualified it for cancer chemotherapy due to especial physiology of cancerous tissue in comparison with the surrounding normal tissue. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46657.     

Development of a thermosensitive grafted drug delivery system—synthesis and characterization of NIPAAm‐based grafts and hydrogel structure

A thermosensitive grafted hydrogel was investigated for heating‐activated drug release. The hydrogel was created by grafting oligomers of N‐isopropylacrylamide‐co‐acrylamide (AAm) to a poly(2‐hydroxyethyl methacrylate), or PHEMA, hydrogel. N‐Isopropylacrylamide‐co‐AAm oligomers were synthesized with a range of compositions to raise the lower critical solution temperature (LCST) above physiological temperature. PHEMA hydrogels with these thermosensitive grafts were synthesized by free‐radical solution polymerization, using an acrylated version of the oligomers. The oligomers were characterized for their molecular weight, LCSTs, and rate of response to a change in temperature. With the flexibility in tuning their properties by varying reaction parameters, these oligomers present possibilities in several fields, including drug delivery. The impact of cross‐linking agent type and the amount and presence of grafts on the polymer network structure was found by determining the hydrogel mesh sizes. PHEMA gels cross‐linked with methylenebisacrylamide had larger mesh sizes than those cross‐linked with ethylene glycol dimethacrylate. Increasing amounts of cross‐linking agent decreased mesh sizes. LCSTs exhibited by oligomers were slightly lower than those exhibited by polymer gels of the same composition. The grafting reaction was found to have only a slight impact on the hydrogel mesh size. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011