共查询到20条相似文献,搜索用时 93 毫秒
1.
收集了2006年7月~2007年6月世界塑料工业的相关资料,介绍了2006~2007年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍. 相似文献
2.
对国内外研究者在尿素合成反应的热力学、动力学、化学平衡及相平衡等方面的研究成果进行了总结和评价,提供了尿素合成反应的热力学、动力学数据和相图,提出了一些新理念. 相似文献
3.
4.
1 "夹层粘接"新工艺 "夹层粘接"是作者经多年研究、开发的一种新技术,在设备大修理工作中,对于严重摩擦磨损的机床导轨,采用独特的"夹层粘接"工艺,以夹布塑料为加厚层,填充F4为表面耐磨层,使机床导轨恢复了原有的精度和尺寸要求,缩短了修理时间,减轻了劳动强度,节约了修理费用,取得了显著的综合效益. 相似文献
5.
4.3 聚碳酸酯海关进出口分析 1999~2006年间PC进口量年均增长27.91%,比1998~2005年间PC进口量年均增长率31.27%下降3.36个百分点.国内产量偏低、市场需求巨大的现状进一步暴露.中国PC消费主要依靠进口,2006年中国产量仅占总消费量的10%上下.1999~2006年间PC进口量年均增长27.91%,比1998~2005年间Pc进口量年均增长率36.68%下降3.36个百分点.2006年初级形状的聚碳酸酯进口地有45个,主要进口地为泰国(占16.49%),其次为中国(12.86%)、新加坡(11.50%)、美国(10.95%)、日本(10.65%)、韩国(9.81%)、中国台湾省(9.50%)、西班牙(7.46%),八进口地进口量占总进口量的89.2%. 相似文献
6.
7.
1 对蒸骨制胶过程的认识 蒸骨制胶的过程也就是用蒸汽使骨料块在密封的锅内受热、受压,使骨质疏松,由生胶质热解转变为可溶解于热水的动物胶质(习惯上称之为"骨胶")的过程. 相似文献
8.
收集了2001年7月到2002年6月有关国外塑料工业的相关期刊资料,介绍了2001年到2002年国外塑料工业的发展情况,提供了世界各地域塑料原材料的产量及构成比,日本、美国、加拿大、德国、法国、比利时、墨西哥、芬兰、西班牙等国家的树脂产量、消费量及增长率,以及日本、西欧、北美等地区的不同品种塑料原料消费量和增长率统计.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)不同品种的顺序,对树脂的产量、消费量及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等有关技术作了详细的介绍. 相似文献
9.
10.
在我的办公桌上,放着一把<井岗山八角楼>粉彩山水壶,每当我空闲时,总喜欢拿在手中把玩,这件小小的山水壶虽不能展现气势豪雄的大写意山水画面,也不可能真正达到烟云满纸的效果,但细腻的工笔,雅静的画意给人一种清心的感觉和享受. 相似文献
11.
12.
Dinesh Singh J. K. Gehlawat Musti S. Rao 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1990,47(2):127-136
Oslefins and diolefins are important intermediates in the petrochemical industry and the future promises a further substantial increase in demand. While several catalysts have been formulated in the past for the abstraction of hydrogen from butenes and propylene, these catalysts are inefficient in the abstraction of first hydrogen from butane. Bismuth molybdates (β and γ-phases) containing iron oxide and supported on alumina are used as catalysts in the present investigation on the oxidative dehydrogenation of n-butane. Effects of catalyst content, temperature and oxygen: n-butane ratio on conversion and selectivity to butadiene and (C4H8 + C4H6) are studied in the following ranges of experimental conditions: β-bismuth molybdate/100 mol support I(K), 3–9; γ-bismuth molybdate/100 mol support I(K), 5-20; temperature, 400–500°C; O2: butane ratio, 0.6:1.7. 相似文献
13.
A viscometer used to measure the viscosity of 10 μl of a liquid, must be miniaturized down, and the liquid velocity gradient in the channel used to determine the viscosity coefficient. Two major factors that affect the liquid velocity are the mechanical forces exerted by the mechanical motors and electromagnetic forces. In this study, electrowetting on dielectric (EWOD) is adopted to drive liquids. Variously sized electrodes on a chip, and two shapes of channel are employed to measure the velocity gradient to determine the viscosity coefficient. The device is fabricated by microelectromechanical system (MEMS) technology. The dielectric layer used in EWOD has a high dielectric constant, BST (Ba0.7Sr0.3TiO3), to reduce the required applied voltage; its surface is coated with hydrophobic polymer, polytetrafluoro-ethylene (PTFE, Teflon® AF DuPont). Experimental results demonstrate that liquids can be pulled at 660 μm/s in linear channels by applying a voltage of 15 V. 相似文献
14.
考登钢作为一种高耐候结构钢,广泛应用于各个领域。在火力发电方面,考登钢主要应用在工作环境比较恶劣的烟气加热器和空气预热器中。考登钢表面涂搪的目的就是进一步提高其耐腐蚀性能,延长使用寿命。为了提高考登钢元件的使用寿命,对考登钢表面涂搪瓷的可行性、密着性能、瓷釉、工艺控制、质量保证等方面进行了研究。 相似文献
15.
16.
采用实验方法考察工艺参数对沉降斑的影响。基于一个带凸台的平板模具,采用L27(313)正交矩阵进行实验,研究了几何尺寸、熔体温度、注射时间、保压压力及保压时间对厚度突变处沉降斑形成的影响,同时还考虑了熔体温度和注射时间以及保压压力和注射时间之间的交互作用影响;通过性噪比分析和F检验优化成型工艺条件并对工艺参数的影响进行显著性分析。结果表明,对于厚度突变的平板制品,厚度突变的程度对其沉降斑形成的影响最大,其次为熔体温度,保压压力,保压时间等;采取减小厚度变化,降低熔体温度或增加保压压力和保压时间等措施,可以减小厚度突变处沉降斑,从而减少其对外观质量的影响;因素之间的交互作用对制品沉降斑的形成有一定的影响,熔体温度B和注射时间C之间的交互作用影响较为明显,而保压压力D和注射时间C之间的交互作用对该质量指标的影响最小,可以并入误差。 相似文献
17.
In reexamining medium effects on photochemical reactions, we have emphasized those on unequilibrated excited species such as the Franck-Condon species. Despite recent advances in femtochemistry, such a discussion in molecular photochemistry is uncommon, and the problem remains challenging on account of the extremely short-lived excited species. However, in such cases, a small perturbation resulting from, for example, weak guest-host interactions could turn into a determining factor in dictating the course of a photochemical channel of deactivation. Examples of medium-directed diabatic processes have been examined with this idea in mind. A modified view on rhodopsin photoisomerization is presented along with the consideration that confinement does not necessarily lead to inhibition of reactions of the trapped substrate. 相似文献
18.
研究了温度和pH值对漆酶酶活以及漆酶处理纤维压制纤维板性能的影响。结果表明,pH较低、温度较高时漆酶酶活较高,压制的纤维板强度性能较好。但温度太高(60~80℃),延长加热时间,漆酶稳定性变差,酶活明显降低,压制纤维板的强度下降。 相似文献
19.
20.
紫砂壶不仅是一种实用的泡茶工具,更是茶文化不可缺少的一部分。“爱紫砂壶的人不一定爱茶,但凡爱茶的人一定爱紫砂壶。” 相似文献