共查询到19条相似文献,搜索用时 125 毫秒
1.
2.
陈红雷 《中国石油和化工标准与质量》2014,(7):32+29
紫外氧化技术原理在石化废水中处理中的应用范围广,可以处理诸如:化工电镀废水、化工制药废水、化工染料废水、石油开采废水等含有机污染物废水。通过这一技术的运用可以有效提高石化废水中污染物的清除率,减少处理时化工试剂的投放量,降低运营成本。适合污水量处理量不大,但污染严重的石油、化工废水的分布式处理系统,具有良好的经济效益和发展前景。 相似文献
3.
4.
5.
采用新型的两级循环曝气生物滤池工艺,对稀释中和后的炼油碱渣废水进行生物处理工业试验。研究了溶解氧质量浓度、水力停留时间、营养物质、pH值、温度和反冲洗周期等因素对碱渣废水生物处理效果的影响。在适宜的操作条件下,炼油碱渣废水经两级生物处理后,COD、硫化物、挥发酚和石油类平均去除率分别达到89.3 %、99.8 %、93.6 %和85.7 %,其中COD和硫化物的平均去除负荷分别达到8.37 kg·m-3·d-1和4.44 kg·m-3·d-1。循环曝气生物滤池是一种高负荷、高效率、反冲洗周期长和低成本的炼油碱渣废水处理方法,具有良好的应用前景。 相似文献
6.
7.
8.
9.
10.
11.
12.
13.
针对聚甲基丙烯酸酯类石油添加剂生产废水具有高浓度、高盐度、高毒性和难于微生物降解的特征,提出了采用聚合氯化铝(PAC)和聚丙烯酰胺(PAM)复合处理技术作为其生物处理的预处理工艺。通过正交试验的方法对影响石油添加剂生产废水混凝效果的各因素进行了研究。试验表明:常温下,pH值为7.5,PAC和PAM投加量分别为1500mg/L和6mg/L,搅拌时间为15min时,对石油添加剂生产废水处理得到较为满意的效果,COD的去除率为27.3%。采用该预处理工艺,能有效减缓生物处理的有机冲击负荷,有利于后续生物处理的顺利运行。 相似文献
14.
15.
随着我国社会经济的不断发展,衍生出很多严峻的环境问题,尤其是煤化行业,其所产生的大量工业废水由于处理不当,导致的环境污染,已经严重制约了行业的健康发展。因此,必须要深入研究煤化工业废水处理技术,以此来缓解煤化工企业的发展困境,提高企业废水处理质量,助力行业可持续发展。 相似文献
16.
难降解高含盐化工污水处理技术研究 总被引:2,自引:0,他引:2
探讨了物理法、电化学法、生物法处理高盐化工污水的效果及问题。水解酸化处理方法是一种介于好氧和厌氧处理法之间的方法,本文重点论述了水解酸化工艺处理难降解高盐化工污水的国内外现状及发展趋势、工艺方式的类型及研究现状。指出水解酸化工艺与其它工艺组合可以降低处理成本,提高处理效率,认为其将是今后化工污水治理的重要生物预处理方法。 相似文献
17.
G. N. McDermott 《Journal of the American Oil Chemists' Society》1976,53(6):449-458
Wastewaters from vegetable oil processing in the U.S. are in many cases discharged to publicly owned wastewater systems for
treatment with community wastewaters. Nine plants provide treatment for direct discharge to rivers or streams. The major treatment
process utilized in either case is biological treatment. Both research studies and full-scale treatment have demonstrated
the effectiveness of biological treatment in degradation of vegetable oil to an extent equal to or superior to removal of
organic material from domestic sewage. Limitations of the concentration of oil accepted in discharges to publicly owned treatment
works were prevalent in earlier years; however, during the last few years, the compatibility of vegetable oil in municipal
wastewater treatment systems has been acknowledged. Real problems with oil are more likely from petroleum type oil which can
be associated with process and effluent quality problems. The train of treatment processes for direct discharge typically
includes pH adjustment to acidic state, gravity separation, pH adjustment to near neutral, chemical coagulation plus dissolved
air flotation, biological treatment, and in some cases filtration through granular media. Effluent qualities as good as 7.5
mg/1 of biochemical oxygen demand and 1 mg/1 of oil have been reported. 相似文献
18.