Modified Sulfonated Poly(ether ether ketone) Based Mixed Matrix Membranes for Direct Methanol Fuel Cells

Mixed matrix membranes based on zeolite 4A‐methane sulfonic acid (MSA)‐sulfonated poly(ether ether ketone) (SPEEK) are evaluated as a potential polymer electrolyte membrane (PEM) for direct methanol fuel cells (DMFCs). Ion‐exchange capacity, sorption of water, and water–methanol mixture, proton conductivity, and methanol permeability for the mixed‐matrix membranes have been extensively investigated. The mixed‐matrix membranes are also characterized for their cross‐sectional morphology, mechanical, and thermal properties. DMFCs employing SPEEK‐MSA (20 wt.%) blend, zeolite 4A (4 wt.%)‐SPEEK‐MSA (20 wt.%) mixed matrix membranes deliver peak power densities of 130 and 159 mW cm^–2, respectively; while a peak power density of only 95 mW cm^–2 is obtained for the DMFC employing pristine SPEEK membrane at 70 °C. The results showed that these SPEEK based mixed matrix membranes exhibit higher DMFC performance and lower methanol permeability in comparison to Nafion‐117 membrane.     

Sulfonated poly(ether ether ketone)/epoxy/phenol novolac blend proton‐exchange membranes with low methanol permeability

A crosslinked epoxy [4,4′‐diglycidyl‐(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP)], cured by phenol novolac (PN), was introduced into a sulfonated poly(ether ether ketone) (SPEEK) membrane (ion‐exchange capacity = 2.0 mequiv/g) with a casting‐solution, evaporation, and heating crosslinking method to improve the mechanical properties, dimensional stability, water retention, and methanol resistance. By Fourier transform infrared analysis, the interactions between the sulfonic acid groups and hydroxyl groups in the blend membranes were confirmed. The microstructure and morphology of the blend membranes were investigated with atomic force microscopy. As expected, the blend membranes showed excellent mechanical properties, good thermal properties (thermal stability above 200°C), lower swelling ratios (1.4% at 25°C and 7.0% at 80°C), higher water retention (water diffusion coefficient = 9.8 × 10^?6 cm²/s), and a lower methanol permeability coefficient (3.6 × 10^?8 cm²/s) than the pristine SPEEK membrane. Although the proton conductivity of the blend membranes decreased, a higher selectivity (ratio of the proton conductivity to the methanol permeability) was obtained than that of the pristine SPEEK membrane. The results showed that the SPEEK/TMBP/PN blend membranes could have potential use as proton‐exchange membranes in direct methanol fuel cells. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Hydrophilic TiO2 decorated carbon nanotubes/sulfonated poly(ether ether ketone) composite proton exchange membranes for fuel cells

Sulfonated poly(ether ether ketone) (SPEEK) is currently considered to be one of the most potential candidates of commercial perfluorinated sulfonic acid proton exchange membranes. To balance the proton conductivity and mechanical properties of SPEEK, nano TiO₂ coated carbon nanotubes (TiO₂@CNTs) were prepared using a benzyl alcohol-assisted sol-gel method and then used as a new nanofiller to modify SPEEK to prepare SPEEK/TiO₂@CNTs composite membranes. The thick insulated TiO₂ coating layer can effectively avoid the risk of electronic short-circuiting formed by CNTs, while the hydrophilicity of TiO₂ can also reduce the polar difference between CNTs and SPEEK matrix, thus promoting the homogeneous dispersion of CNTs in the composites. As a result, the composite membranes demonstrated simultaneously improved strength and proton conductivity. Incorporating 5 wt% of TiO₂@CNTs exhibited 31% growth in mechanical strength when compared with pure SPEEK. Moreover, the maximum conductivity was 0.104 S cm⁻¹ (80°C) for the composite membrane with 5 wt% of TiO₂@CNTs, which was nearly twice as high as that of SPEEK membrane (0.052 S cm⁻¹).     

Incorporating sepiolite and kaolinite to improve the performance of SPEEK composite membranes for proton exchange membrane fuel cells

SPEEK polymer based thermally crosslinked polymer membranes are prepared by sol-gel synthesis using kaolinite and sepiolite clays as additives. Characterization tests, ie, mechanical stability, thermal gravimetric analysis, ion exchange capability, swelling properties, water uptake capacities, electrochemical impedance spectroscopy analysis, and Fourier transform infrared spectroscopy (FTIR) analysis of the membranes were conducted. The sepiolite and kaolinite addition enhanced the thermal stability and the thermal crosslinking reduced the swelling capacity of the synthesized membranes. Proton conductivity results were increased from 0.172 to 0.268 S cm⁻¹ by adding 9% of kaolinite, and to 0.329 S cm⁻¹ at 80°C by adding 9% of sepiolite to the SPEEK membrane's polymer structure. The fuel cell current density and potential measurements of 141 mA cm⁻² and 84.6 mW cm⁻² were found respectively at 0.6 V for the SPEEK/S9 membrane, whereas values of 600 mA cm⁻² and 348 mW cm⁻² were found for the Nafion commercial membrane.     

Sulfonated poly(ether ether ketone)/s–TiO2 composite membrane for a vanadium redox flow battery

The SPEEK/s-TiO₂ composite membrane was prepared by blending sulfonated poly(ether ether ketone) (SPEEK) and sulfonated titanium dioxide (s-TiO₂) nanoparticles. The important physiochemical parameters such as proton conductivity, water uptake, swelling degree and ion exchange capacity of the composite membrane were measured. The thermal stability and chemical stability were also tested. It was observed that the SPEEK/s-TiO₂ composite membrane exhibited the best selectivity (7.13 × 10⁴ S·min·cm⁻³) accompanying high proton conductivity (0.061 S·cm⁻¹) and low tetravalent vanadium ion (VO²⁺) permeability (8.55 × 10⁻⁷ cm²·min⁻¹) compared with Nafion117, SPEEK and SPEEK/TiO₂ membranes. The battery performance with these membranes was characterized by charge–discharge cycling tests and it was found that the SPEEK/s-TiO₂ composite membrane showed the highest energy efficiency (EE) up to 82.3%, indicating the SPEEK/s-TiO₂ composite membrane is a candidate for vanadium redox flow battery (VRFB) application. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48830.     

Study of high-temperature proton exchange membrane through one-step encapsulation of ionic liquid in sulfonated poly(ether ether ketone)

The proton exchange membrane (PEM) is the core component of a high-performance proton exchange membrane fuel cell (PEMFC). Since the traditional PEM has the disadvantages of poor cell performance and high cost, a new kind of PEM with good proton conductivity, low cost and simple preparation should be explored. In this paper, several different binary hybrid membranes were successfully prepared through one-step encapsulation of different ionic liquids (ILs) in sulfonated poly(ether ether ketone) (SPEEK). The prepared membranes were characterized by scanning electron microscope (SEM), thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), proton conductivity measurements and dynamic mechanical analysis (DMA). SEM images showed that ILs were fully doped into SPEEK. FT-IR and XPS proved that SPEEK and IL formed a new chemical bond combined with intermolecular hydrogen bonds. The TG results showed that the binary hybrid membranes could maintain stability even at 300°C. The water uptake and swelling ratio showed that the water absorption capacity of the binary composite membrane played a vital role in improving proton conductivity. The proton conductivity study showed that ILs doping also helped to improve the proton conductivity of the SPEEK membrane. When the doping amount of IL was maintained at 30 wt.%, it has the highest proton conductivity, 25 mS cm⁻¹ at 120°C. It was proved that anhydrous hybrid membrane tetraphenyl imidazole sulfate/SPEEK ([IM2][H₂PO₄]/SPEEK) could be used in PEMFC at medium temperature.     

Sulphonated Poly(ether ether ketone) Proton Exchange Membranes for Fuel Cell Applications

Polymer electrolyte membrane fuel cells (PEMFCs) are promising new power sources for automotive and portable devices. Nafion® is the currently used membrane in PEMFCs. Although these membranes show high proton conductivity and excellent chemical stability, their high cost makes them unpractical for commercial purposes. Sulphonated poly(ether ether ketone) (SPEEK) ionomers were synthesized using chlorosulphonic acid as the sulphonating agent in dichloromethane medium. Homogeneous proton-conducting membranes were developed from the obtained SPEEK by solvent casting method. Membranes were assessed for their suitability in fuel cell applications. The extent of sulphonation was controlled by varying the reaction time, concentration of polymer, and concentration of sulphonating agent. The SPEEK membranes exhibit degree of sulphonation from 10 to 66%, ion exchange capacity from 0.29 to 1.92 meq/g and maximum water and methanol uptake up to 54 and 22%, respectively, at 25°C. The membranes were characterized by FTIR to confirm sulphonation, and DSC and TGA to investigate the thermal stability. The proton conductivities of such membranes were found to be excellent in the order of 10^?2 S/cm in the fully hydrated condition at room temperature as measured by impedance spectroscopy. The durability of the membranes was also tested. The study revealed the possibility of a cheaper alternative membrane for use in PEMFC.     

DMFCs用磺化聚醚醚酮/磺化酚酞型聚醚砜共混质子交换膜

A sulfonated poly(ether ether ketone) (SPEEK) membrane with fairly high degree of sulfonation (DS) swells excessively and even dissolves at high temperature. To solve these problems, sulfonated phenolphthalein poly(ether sulfone) (SPES-C, DS 53.7%) is blended with the SPEEK matrix (DS 55.1%, 61.7%) to prepare SPEEK/SPES-C blend membrane. The decrease in swelling degree and methanol permeability of the membrane is dose-dependent. Pure SPEEK (DS 61.7%) membrane dissolves completely in water at 70ºC, whereas the swelling degree of the SPEEK (DS 61.7%)/SPES-C (40%, by mass) membrane is 29.7% at 80ºC. From room temperature to 80ºC, the methanol permeability of all SPEEK (DS 55.1%)/SPES-C blend membranes is about one order of magnitude lower than that of Nafion®115. At higher temperature, the addition of SPES-C polymer increases the dimensional stability and greater proton conductivity can be achieved. The SPEEK (DS 55.1%)/SPES-C (40%, by mass) membrane can withstand temperatures up to 150ºC. The proton conductivity of SPEEK (DS 55.1%)/SPES-C (30%, by mass) membrane approaches 0.16 S•cm－1, matching that of Nafion115 at 140ºC and 100% RH, while pure SPEEK (DS 55.1%) membrane dissolves at 90ºC. The SPEEK/SPES-C blend membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.     

Preparation of highly H+ permeable sulfonated poly(ether ether ketone) cation exchange membranes and their applications in electro‐generation of thioglycolic acid

BACKGROUND: Sulfonated poly(ether ether ketone) (SPEEK) was successfully synthesized from sulfonated 4,4′‐difluorobenzophenone, 4,4′‐difluorobenzophenone and bisphenol A. SPEEK cation exchange membranes were prepared by the casting method. The composition and morphology of SPEEK were characterized using Fourier transform infrared and ¹H NMR spectroscopies, respectively. The ion exchange capacity (IEC), water uptake and degree of swelling of the membranes were also investigated. SPEEK120 was used as a separator in an electrolysis cell to produce thioglycolic acid (TGA). RESULTS: SPEEK polymerization was carried out at 145 and 175 °C for 10 h. The IEC of the SPEEK membranes was measured as 0.24–2.02 meq g^?1 and the water uptake as 2.26–26.45%. The degree of swelling of the membranes was 1.71–15.28%. TGA was effectively prepared by electro‐reduction of dithioglycolic acid. The current efficiency peaked at 58.31% at room temperature with a current density of 15 mA cm^?2. CONCLUSION: SPEEK120 membrane shows good dimensional stability and H⁺ permeability. Compared to the traditional metal‐reduction method, the current electro‐reduction technique avoids the use of zinc powder and so reduces environmental pollution. Copyright © 2009 Society of Chemical Industry     

Preparation and investigation of acid–base composite membranes with modified graphitic carbon nanosheets for direct methanol fuel cells

The ethylenediamine-modified graphite oxide (EGO)-doped sulfonated poly (arylene ether ketone) (SPEEK) composite membranes have been prepared and developed for fuel cell applications in the present work. The base-modified EGO improves the dispersion of inorganic nanosheet in the polymer matrix and enhances proton conductivity by creating continuous conduction pathways. Furthermore, the methanol barrier property also be enhanced due to the nanosheet block the methanol-transport channels. EGO-filled membranes display improved dimensional stability, proton conductivity, and ethanol permeability than those using SPEEK control and graphite oxide (GO)-filled membranes. In the direct methanol fuel cells (DMFCs), the SPEEK/EGO-1.5 membrane displays the highest current density of 395.9 mA/cm² at 60°C, which is 1.6- and 1.4-fold higher than that of SPEEK (254.0 mA/cm²) and SPEEK/GO membrane (292.6 mA/cm²).     

Novel amphoteric ion exchange membranes by blending sulfonated poly(ether ether ketone) with ammonium polyphosphate for vanadium redox flow battery applications

A novel amphoteric ion exchange membrane for vanadium redox flow battery (VRFB) was explored by blending sulfonated poly(ether ether ketone) (SPEEK) and ammonium polyphosphate (APP). The high-stability flame retardant of cross-linked APP with a large number of NH₄⁺ groups was first introduced into SPEEK membrane. It was observed that the addition of APP with special structure could achieve a good balance between proton conductivity and vanadium ions permeability. The abundant NH₄⁺ in APP could block the penetration of vanadium ions by Donnan/Manning exclusion effect and ionic crossing networks due to the ionic bonds between cation and anion groups, and specially a small amount of APP within 5% could remarkably improve the proton conductivity of pristine SPEEK membrane might be ascribed to the unique fast proton transport channels formed by hydrogen bond networks and particular micro-phase separation as a result of interaction between SPEEK and APP. When 5% APP was blended, the SPEEK/APP-5% (S/APP-5%) amphoteric membrane showed a higher selectivity of 20.87 × 10⁴ S min/cm³ (with a good proton conductivity of 0.075 S/cm and a lower VO²⁺ permeability of 3.45 × 10⁻⁷ cm²/ min) and presented better thermal and chemical stability compared to Nafion115 and SPEEK membranes. The VRFB single cell assembled with S/APP-5% amphoteric membrane exhibited more excellent performance than that of Nafion115 and pristine SPEEK membranes, which revealed a higher coulombic efficiency of 96.3%–98.3%, comparable voltage efficiency of 88.4%–78.7% and higher energy efficiency of 85.1%–77.4% from 40 to 80 mA/cm², respectively, and showed relatively good stability of the efficiency up to 50 cycles at 60 mA/cm². The results demonstrated that the designed S/APP amphiprotic membrane of outstanding selectivity, high battery efficiency, and good durability is a prospected VRFB separator.     

Sulfonated poly(ether ether ketone)/zirconium tricarboxybutylphosphonate composite proton-exchange membranes for direct methanol fuel cells

Sulfonated poly(ether ether ketone) (SPEEK) is a very promising alternative membrane material for direct methanol fuel cells. However, with a fairly high degree of sulfonation (DS), SPEEK membranes can swell excessively and even dissolve at high temperature. This restricts membranes from working above a high tolerable temperature to get high proton conductivity. To deal with this contradictory situation, insolvable zirconium tricarboxybutylphosphonate (Zr(PBTC)) powder was employed to make a composite with SPEEK polymer in an attempt to improve temperature tolerance of the membranes. SPEEK/Zr(PBTC) composite membranes were obtained by casting a homogeneous mixture of Zr(PBTC) and SPEEK in N,N-dimethylacetamide on a glass plate and then evaporating the solvent at 60°C. Many characteristics were investigated, including thermal stability, liquid uptake, methanol permeability and proton conductivity. Results showed significant improvement not only in temperature tolerance, but also in methanol resistance of the SPEEK/Zr(PBTC) composite membranes. The membranes containing 30 wt-% ∼ 40 wt-% of Zr(PBTC) had their methanol permeability around 10⁻⁷ cm²·s⁻¹ at room temperature to 80°C, which was one order of magnitude lower than that of Nafion?115. High proton conductivity of the composite membranes, however, could also be achieved from higher temperature applied. At 100% relative humidity, above 90°C the conductivity of the composite membrane containing 40 wt-% of Zr(PBTC) exceeded that of the Nafion?115 membrane and even reached a high value of 0.36 S·cm⁻¹ at 160°C. Improved applicable temperature and high conductivity of the compositemembrane indicated its promising application inDMFC operations at high temperature. __________ Translated from Acta Polymerica Sinica, 2007, (4): 337–342 [译自:高分子学报]     

Partially Fluorinated Multiblock Poly(arylene ether sulfone) Membranes for Fuel Cell Applications

Sulfonated poly(arylene ether sulfone) (SPAES‐F series) membranes, which are partially fluorinated multiblock polymers containing Bisphenol 6F (6F‐BPA), are synthesized. The membranes exhibit less water uptake and higher ion conductivity at similar ion exchange capacity (IEC) values compared to previous SPAES membranes containing identical hydrophilic blocks. This is attributed to the presence of 6F‐BPA in the hydrophobic block, which enhances hydrophobicity and promotes phase separation, as observed through transmission electron microscopy analysis. F4 (IEC = 2.4 meq g^?1) shows superior ion conductivity than Nafion NRE212 membrane irrespective of the humidity level. Furthermore, the SPAES electrolyte membrane of 1.5 meq g^?1 produces better performance than NRE212, yielding a current density of 488 mA cm^?2 at 80 °C, 80% RH, and 0.6 V. In 50% RH at 80 °C, SPAES with 1.5 meq g^?1 exhibits a cell resistance and fuel cell performance comparable to those of NRE212; clearly, regulating hydrophobicity and hydrophilicity is crucial for enhanced performance.     

Effect of phosphotungstic acid blending on properties of sulfonated poly(ether ether ketone)–poly(ethylene glycol) crosslinked membranes

This study shows the effect of phosphotungstic acid (PWA) blended into a sulfonated poly(ether ether ketone) (SPEEK) and poly(ethylene glycol) (PEG) crosslinked membrane on the membrane's electrochemical and mechanical properties. The PWA weight percentage was varied from 0 to 50%. All of the membranes were equilibrated with water at room temperature (27 °C) and elevated temperature (60 °C), and their properties were investigated. A scanning electron microscope with energy dispersive X‐ray was used to ascertain the tungsten concentration remaining in the membrane after water treatment. A systematic decrease in tungsten concentration was seen with the increase in the initial PWA percentage. The membrane blended with 10% PWA showed the best properties, having the highest conductivity (0.11 S cm^?1), mechanical strength, and chemical stability. Membranes with 10% PWA and without PWA were studied in a H₂/O₂ fuel cell. The membrane blended with 10% PWA gave 33% more power density than the membrane without PWA. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46667.     

Physicochemical characterization of low sulfonated polyether ether ketone/Smectite clay composite for proton exchange membrane fuel cells

Polyether ether ketone (PEEK) with a low sulfonation degree was blended using different proportions of sodium rich Smectite clay (3 and 6 wt%) to use as an electrolyte membrane for fuel cell application. The structural functionalities, surface morphologies, and the thermal stability of the resultant composite membranes were characterized using Fourier-transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscopy, atom force microscopy, and thermo-gravimetric analysis. FT-IR showed that no chemical reactions take place between the sulfonated polyether ether ketone (SPEEK) and the clay with different ratios. XRD diffractograms illustrated a lower degree of crystallinity of the blended SPEEK than pristine SPEEK. The elaborated composite membranes proved to have a higher thermal stability than SPEEK. Furthermore, the SPEEK/clay composite membranes with 3 and 6 wt% in clay loading had higher water uptake and lower methanol uptake than those in pristine SPEEK It was also shown that, the incorporation of sodium ions rich Smectite clay layers between the clusters in SPEEK improved the conductivity to 2 × 10⁻² S/cm at 140°C (for 6 wt% in clay) without compromising the dimensional stability of the composite membranes. These results propose the composite membranes as a potential candidate for methanol fuel cells at temperatures above 120°C making SPEEK composite membrane competitive to that of Nafion membrane.     

Proton exchange membranes based on poly(vinylidene fluoride) and sulfonated poly(ether ether ketone)

Blend membranes were obtained by solution casting from poly(vinylidene fluoride) (PVDF) and sulfonated poly(ether ether ketone) (SPEEK) in N,N-dimethylacetamide (DMAc). DSC and XRD were used to characterize the structure of the blend membranes. The effect of PVDF content on the membrane properties was investigated. The methanol permeability, water uptake and the swelling ratio of blend membranes decreased with the increase of PVDF content. Though the proton conductivity decreased upon the addition of PVDF, they were still comparable to that of Nafion^® 117 membrane. Higher selectivities were also found for most blend membranes in comparison with Nafion^® 117 membrane. The effect of methanol concentration on solution uptake, swelling ratio and methanol permeability of the blend membranes was also studied.     

Fluorenyl‐containing Quaternary Ammonium Poly(arylene ether sulfone)s for Anion Exchange Membrane Applications

A series of anion exchange membranes (AEM) based on block quaternary ammonium poly(arylene ether sulfone) (QA‐bPAES) were successfully synthesized from 9,9′‐bis(4‐hydroxyphenyl) fluorene, 4,4′‐(hexafluoroisopropylidene) diphenol and 4,4′‐difluorodiphenyl sulfone via block polymerization, chloromethylation, quaternization, alkalization and solution casting. Properties of the obtained QA‐bPAES membranes, including ion exchange capacity (IEC), water uptake, swelling ratios, methanol permeability and ion conductivity were investigated. The obtained QA‐bPAES membranes showed low water uptakes, high ion conductivities and good physical and chemical stability. For example, the membrane of QA‐bPAES(20/10)‐1.34 with IEC of 1.34 mmol g⁻¹ exhibited swelling ratios of 5.0% and 5.1% in in‐plane and through‐plane direction, respectively, and ion conductivity of 15.6 mS cm⁻¹ in water at 60 °C with low methanol permeability of 1.06 × 10⁻⁷ cm² s⁻¹ (25 °C). All the results indicated that this type of block membranes had good potentials for alkaline anion exchange membrane fuel cell applications.     

Sulfonated poly(arylene ether ketone)s prepared by direct copolymerization as proton exchange membranes: Synthesis and comparative investigation on transport properties

Sulfonated poly(aryl ether ketone)s (SPAEK) copolymers were synthesized by aromatic nucleophilic polycondensation from 3,3′, 5,5′‐tetramethyl‐4, 4′–biphenol, 1,4‐bis(4‐fluorobenzoyl) benzene, and disulfonated difluorobenzophenone. The SPAEK membranes did not exhibit excessive swelling in hot water and at the same time show the proton conductivities in the range of 0.030 S/cm to 0.099 S/cm at 80°C. The methanol diffusion coefficients of the SPAEK membranes were in the range of 4.7 × 10^?7 to 8.1 × 10^?7cm²/s measured at 25°C. The transport properties of this series of SPAEK copolymers were compared to poly(aryl ether ether ketone)s (SPEEK), poly(aryl ether ether ketone ketone)s (SPEEKK), and Nafion® membranes. It was found that the transport properties (including proton conductivity and methanol permeability) follows the trend of SPEEKK‐60 < SPAEK‐60 < SPEEK‐60 < Nafion® 117, the order of which is also attributed to the differences in the chemical structure of the polymers and the membrane morphology. In general, this novel series of SPAEK membranes possess various advantages, such as low cost of the initial monomers, high thermal and mechanical stability, and low methanol permeability while simultaneously possessing sufficient proton conductivity, which makes them notably promising as proton exchange membrane (PEM) materials in direct methanol fuel cell (DMFC) applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A convenient crosslinking method for sulfonated poly(ether ether ketone) membranes via friedel–crafts reaction using 1,6‐dibromohexane and aluminum trichloride

In this study, sulfonated poly(ether ether ketone) (SPEEK) was very efficiently crosslinked via a Friedel–Craft reaction using 1,6‐dibromohexane and AlCl₃. The resulting crosslinked SPEEK (c‐SPEEK) membranes exhibited improved dimensional stability, thermal and chemical stability, and mechanical strength with slight reduction in the elongation. The methanol permeability was reduced by approximately two orders of magnitude by the crosslinking reaction. The proton conductivities of c‐SPEEK membranes were greater than Nafion‐212 in the temperature range of 30–90°C. Overall, this new crosslinking method can be conveniently and efficiently applicable to most aromatic hydrocarbon polymer membranes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40695.     

Ionically Cross‐Linked Proton Conducting Membranes for Fuel Cells

For improving stability without sacrificing ionic conductivity, ionically cross‐linked proton conducting membranes are fabricated from Na⁺‐form sulfonated poly(phthalazinone ether sulfone kentone) (SPPESK) and H⁺‐formed sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO). Ionically acid‐base cross‐linking between sulfonic acid groups in SPPO and phthalazone groups in SPPESK impart the composite membranes the good miscibility and electrochemical performance. In particular, the composite membranes possess proton conductivity of 60–110 mS cm⁻¹ at 30 °C. By controlling the protonation degree of SPPO within 40–100 %, the composite membranes with favorable cross‐linking degree are qualified for application in fuel cells. The maximum power density of the composite membrane reaches approximately 1100 mW cm⁻² at the current density of 2800 mA cm⁻² at 70 °C.