Orthophosphates and Diphosphates Containing Zinc and Copper and Zinc and Cobalt

Solid solutions of diphosphates of zinc and copper and of zinc and cobalt were synthesized from mixtures of pure diphosphates at temperatures up to 1000°C. Their X-ray diffractometry patterns varied continuously from one end member to the other. Solid solutions of orthophosphates of composition Zn_3−xCox(PO₄)2, with x = 0.4–1.6, were formed at temperatures up to 950°C; all exhibited the structure of γ-Zn₃(PO₄)2. Solid solutions of orthophosphates of composition Zn_3−xCu_x(PO₄)2 exhibited more-complex behavior. At 1000°C and copper contents of 20–80 mol%, a phase that is related to Cu₃(PO₄)2, termed here the "ε-phase," predominated. At 850°–950°C and in the region from 20 mol% to ∼33 mol% of copper, the solid solutions (the "η-phase") adopted the structure of graftonite. At 800°–900°C and 10–15 mol% of copper, the solid solutions exhibited a new structure (the "δ-phase"), which we found to be related to the mineral sarcopside. At temperatures 950°C, the solutions that contained 5–15 mol% of copper (the "β-phase") had the structure of β-Zn₃(PO₄)2, whereas at 800°–850°C, solutions with 5 mol% of copper (the "-phase") exhibited the structure of γ-Zn₃(PO₄)2. Attempts to synthesize Cu⁺ZnPO₄ and Cu⁺Cu²⁺Zn₃(PO₄)3 were unsuccessful.     

Gemini型表面活性剂结构性能与应用

Gemini型表面活性剂的结构和性质与传统的表面活性剂有很大的不同,例如Gemini型表面活性剂可以视为两个普通表面活性剂在亲水基或者靠近亲水基处由连接基团通过化学键连接而成;Gemini表面活性剂的C20值和cmc值都比传统表面活性剂的值要低很多。着重介绍了Gemini型表面活性剂的特性,结构与表面活性的关系以及应用。     

科技创新与钢铁科技进步

建设创新型国家是我们中华民族的历史责任。“自主创新、重点突破、支撑发展、引领未来”的16字方针应当成为我们未来创新活动的指南。建设创新型国家把自主创新放在首位,并提出了引领未来的高标准要求。钢铁科技创新必须突出重点,抓住创新成果产业化这个关键,支撑起行业和国民经济的发展。     

油气管道及储运设施安全保障技术发展现状及展望

相比已经完善丰富的开采和勘探技术,油气的运输以及储存却仍然存在不足之处。我国对能源安全提出更加严格要求的同时,对区域经济的发展规划也有足够重视。因此,保障油气管道的安全则成为了我国能源安全战略的重中之重。在阐释油气管道现阶段在储运安全保障技术发展状况的基础上,分析了现存的问题及解决问题的手段,并指出未来可能使用的目标策略,为今后研究者提供一定程度上的借鉴经验。     

膜的污染和劣化及其防治对策

较为系统地介绍了膜污染和劣化的定义和特点,因膜污染和劣化而造成的膜性能变化,以及如何预防、减少或清除膜污染和劣化的一些通用方法。     

油气储运系统中油气的回收及腐蚀与防护问题

油气储运系统已经与保障国家经济的发展息息相关,介绍了油气储运系统中油气回收问题及腐蚀与防护问题,并提出了相应的解决措施。     

Gel permeation and thin-layer chromatographic characterization and solution properties of butadiene and styrene homopolymers and copolymers

Gel permeation chromatographic (GPC) and thin-layer chromatographic (TLC) studies of polystyrene, polybutadienes (BR), and their copolymers (SBR) have been carried out. GPC primarily separates them on the basis of molecular size, and TLC, on the basis of composition. Methods of obtaining absolute molecular weight distributions for BR and SBR based upon variations of the Strasbourg Universal Calibration procedure are described. In particular, [η]–M relationships in both the GPC solvent (THF) and in a second solvent (toluene) were used; in addition, results of statistical mechanical calculations for \documentclass{article}\pagestyle{empty}\begin{document}$\overline {s^2 }$\end{document} (based on the assumption of negligible steric hindrance and freely rotating bonds) were applied. An experimental comparison of these methods was carried out, and use of the [η]–M relationships for both solvents was found to give satisfactory results. The predictions of the statistical theory were too low. A detailed study of polymer–solvent–gel interaction in the GPC unit was made through investigation of ternary phase equilibrium in the (polystyrene)–THF–(polymer) system. The polymers studied included BR and SBR with varying styrene contents. Experimental techniques for TLC separations of BR, SBR, and polystyrene according to the composition are described.     

油气田开发建设与环境影响

油气田的开发建设一直是我国石油行业中的重中之重。随着我国石油行业的快速发展,各项领域对石油与天然气的需求也越来越大。但是,随着石油与天然气的大力开采,对环境产生了不良的影响。对此,通过对油气田的开发、油气田开发建设对环境的影响以及环境的保护对策等方面进行了简略的说明,希望对我国以后油气田开发建设有一定的指导作用。     

Sunflower and safflower seeds and oils

Summary Chemical analyses of sunflower and safflower seeds, the hulled seed, and the hulls and oils have been made. The 28 samples of sunflower seed, representing four varieties grown at seven locations, contained an average of 29% oil which was composed chiefly (51 to 68%) of linoleic acid glycerides. The eight varieties of safflower seeds grown at Huntley, Montana, contained an average of 33% oil, with an average content of 78% linoleic glycerides. Data on the amounts of ash, nitrogen, sugar, as well as oil, are presented for the whole seeds and their fractions. Paper presented at the 19th fall meeting of the American Oil Chemists’ Society, Chicago, Nov. 7–9, 1945. This is one of the laboratories of the Bureau of Agricultural and Industrial Chemistry, Agricultural Research Administration, U. S. Department of Agriculture.     

Soaps and detergents and the environment

For more than a quarter of a century there has been a constantly growing awareness of, and interest in, the effects of the detergent industry, by the nature and use of its products on the environment. This interest has largely been in terms of the aquatic environment, but also, as with other industries, in terms of other socioecological issues. This paper concentrates on a review of detergents and their components, both organic and inorganic, and their impact on the aquatic environment in different parts of the world. It deals in particular with sodium tripolyphosphate, a major inorganic component in detergents, and presents an up-to-date and critical review of technical, environmental, sociological and legislative aspects of this product on a worldwide basis and a comparison of it with some of its proposed partial substitutes. Presented at the ISF/AOCS meeting, April 1980, New York.     

水解酸化+生物接触氧化法处理印染废水

对几种印染废水处理工艺方案作了比较,结合水质条件,处理工艺等,最终选择了水解酸化+生物接触氧化法工艺处理印染废水。然后对其进行初步设计,并对重要的构筑物进行设计计算,最终出水水质达到国家排放标准。     

绿色火炸药及相关技术的发展与应用

综述了绿色火炸药及其生产工艺、销毁以及回收利用方面具有“绿色”特征的改进和应用研究成果。绿色火炸药包括洁净固体推进剂、无铅双基推进剂、TPE发射药、无毒发射药、无铅点火药和起爆药。绿色制造技术包括N2O5作硝化剂的含能硝基化合物化学合成，过硝酸盐作硝化剂、微生物作催化剂的生物合成技术，连续化柔性制造技术，基于双螺杆混合成型火炸药生产技术，火炸药生产中挥发性污染物的安全消除技术和纳米复合含能材料的Sol-Gel制备技术。绿色销毁和回收利用技术包括销毁产品的熔盐氧化技术、摧毁含含能化合物废水的光催化技术以及火炸药的回收再利用（R^3）技术。评述了上述火炸药及相关技术的最新状况和发展方向，附参考文献25篇。     

防水透气聚氨酯薄膜及涂层的研究和应用

综述几种防水透气聚氨酯薄膜及涂层的结构、防水透气原理及其成型加工工艺。阐述防水透气聚氨酯薄膜及涂层在衣物及医用制品如高档服装、运动服、手术服、伤口敷料及手术巾等方面的应用。指出防水透气聚氨酯薄膜及涂层具有广阔的应用前景。     

Characteristics and composition of melon and grape seed oils and cakes

Watermelon (Citrullus vulgaris) and grape (Vitis vinifera) seeds were investigated for their nutritional quality and oil characteristics. The yields of seeds on an as is basis (edible portion) were 1.6 and 1.8% for grape and melon, respectively. The melonseed on a dry weight basis consisted of 53.6% testa and 46.4% kernel. The crude protein, fat and fiber content were 16.4, 23.1 and 47.7% for melon and 8.2, 14.0 and 38.6% for grape (dry weight basis). Both seeds were found to contain significant levels of Ca, Mg, P and K. The fatty acid profiles showed an unsaturated fatty acid content of 76.1% for melonseed oil and 88.6% for grapeseed oil. The predominant fatty acid in both seeds was linoleic acid. The iodine value, saponification number and acid value were 116, 248 and 0.97 for melonseed oil and 132, 194 and 1.59 for grapeseed oil. The amino acid profiles of both seed cake proteins were determined and compared with hen’s egg protein.     

SBS和SBS环氧化与顺酐化研究

SBS是(苯乙烯-丁二烯-苯乙烯)三嵌段共聚物，是含有聚苯乙烯玻璃化微区及聚丁二烯连续相的多相聚合物，具有热塑性橡胶的性质。它具有良好的拉伸性能、耐湿性、透气性、溶解性及抗滑性，而被大量用于橡胶制品、粘舍剂及沥青和树脂的改性剂等。其缺点是耐油性差，与极性物质不相容，不粘接等。用环氧化及顺酐化改性可改进这方面的缺点。SBS的环氧化改性多半使用过甲酸或过乙酸在溶液中进行。产物可作为压敏胶、热熔胶、密封胶等，用于粘接极性材料，也可作为耐油热塑性橡胶。SBS的顺酐化改性可在熔融态进行，也可在溶液中进行。产物可用作极性聚合物与非极性聚合物的共混增容剂、胶粘剂及进一步合成离聚体。     

填料-橡胶的化学和物理作用及补强ⅡN330,SiO2,n-SiO2和n-SiO2/KH-846与NR

研究了填料－橡胶的相互作用。发现N330－NR间的相互作用。n－SiO2（粒径：15nm）／KH－846－NR间的相互作用，都是化学作用占优势（＞80％），化学作用对补强的贡献率都大于90％；无偶联剂KH－846时，n－SiO2和SiO2（粒径：15．8nm）与NR都无化学作用，只有物理交联，由于隔离作用，都降低硫化体系与橡胶相互作用的化学交联密度，但n-SiO2的物理交联密度是SiO2的2．6倍，对补强的贡献是SiO2的1．9倍，也是n-SiO2／KH－846体系的61％。     

油气集输处理工艺及工艺流程

为了提高油田的生产效率,设计最佳的油气集输处理的工艺流程,更好地完成油气水分离处理的任务。对油气集输工艺技术进行优化,发挥高效油气水分离处理设备的优势,提高油气水处理的质量,保证油气集输工艺顺利实施,获得最佳的油田产量外输。     

Synthesis and Biological Evaluation of (−) and (+)-Spiroleucettadine and Analogues

A second-generation enantiospecific synthesis of spiroleucettadine is described. The original reported antibacterial activity was not observed when the experiment was repeated on the synthetic samples; however, significant anti-proliferative activity was uncovered for both enantiomers of spiroleucettadine. Comparison of the optical rotational data and ORD-CD spectra of both enantiomers and the reported spectrum from the natural source have not provided a definitive answer regarding the absolute stereochemistry of naturally occurring spiroleucettadine. Efforts then focussed on alteration at the C-4 and C-5 positions of the slightly more active (−)-spiroleucettadine. Ten analogues were synthesised, with three analogues found to possess similar anti-proliferative profiles to spiroleucettadine against the H522 lung cancer cell line.     

Bioactivity and osteoinductivity of glasses and glassceramics and their material determinants

Bioactive glasses and glassceramics have been used in both bone repair and tissue engineering applications. An important feature of bioactive glasses and glassceramics, which enables them to be used for desired application, is their biological activity. This activity is manifested by the ability of these materials to form a stable bond with bone tissue (bioactivity) and, in some cases, their ability to promote/initiate osteogenesis (osteoinductivity). A stable material-bone bonding (i.e. bioactivity) results from specific material surface reactions leading to hydroxyapatite (HAp) formation on the material surface. Bioactivity of materials is often evaluated in vitro and the ability of materials to form HAp-like surface layer is usually studied after immersion/incubation of materials in simulated body fluid (SBF). Biological activity of materials can be also defined as their ability to induce specific cell responses leading to faster regeneration of bone tissue. It may be manifested by materials supporting bone cell attachment, proliferation and differentiation (biocompability/osteconductivity), and/or by materials inducing/promoting the expression of multiple bone-related genes that drive osteogenesis (osteoinductivity). Osteoinductivity is often verified in vivo by the materials capability to form bone at etopic (i.e. extraskeletal) sites. However, a lot of in vitro call-based experiments are now offered to determine osteoinductive properties of biomaterials. This review focuses on the silica-based glasses and glass-ceramics, in particular, the sol-gel derived ones, and summarizes their bioactivity and osteoinductivity as major determinants of their biological activity. We highlight the chemistry of bioglasses and glassceramics that affects not only the formation of a stable implant/bone bonding by HAp layer, but also drives the cell response in vitro and in vivo.