深部沿空切顶成巷围岩稳定性控制对策

基于沿空切顶成巷技术原理,以城郊煤矿深部工作面无煤柱开采为背景,综合运用力学分析﹑模拟计算和现场试验等方法,对深部切顶成巷围岩控制关键对策进行深入研究。结果显示：切顶留巷顶板在侧向形成短臂梁结构,降低了巷旁支护体所受压力,切缝范围内岩层垮落后碎胀充填采空区,使留巷顶板下沉量降低了约50%。采空区侧顶板为切顶巷道围岩变形的关键部位,需进行加强支护;深部切顶巷道实体煤帮塑性区范围大,通过煤帮锚索支护技术可将浅部锚杆承载层锚固在弹性区稳定煤体中;深部切顶成巷来压速度快、强度大,巷内单体支柱易造成冲击破断,采用高阻力液压支架巷内临时支护时可较好地抵抗深部强动压;巷旁刚性挡矸装置因无法适应深部围岩大变形而受压弯曲破坏,深部切顶巷道巷旁挡矸结构需实现一定的竖向让位卸压方可与顶底板协调变形。在研究的基础上提出恒阻锚索关键部位支护+可缩性U型钢柔性让位挡矸+巷内液压支架临时支护+实体煤帮锚索补强的深部切顶成巷联合支护技术,并进行现场工业性试验。现场监测结果表明：留巷围岩在滞后工作面约290 m时基本稳定,且稳定后各项指标满足下一工作面使用要求。     

Cable-truss supporting system for gob-side entry driving in deep mine and its application

In order to solve the large deformation controlling problem for surrounding rock of gob-side entry driving under common cable anchor support in deep mine, site survey, physical modeling experiment, numerical simulation and field measurement were synthetically used to analyze the deformation and failure characteristics of surrounding rock. Besides, applicability analysis, prestress field distribution characteristics of surrounding rock and the control effect on large deformation of surrounding rock were also further studied for the gob-side entry driving in deep mine using the cable-truss supporting system. The results show that, first, compared with no support and traditional bolt anchor support, roof cable-truss system can effectively restrain the initiation and propagation of tensile cracks in the roof surrounding rock and arc shear cracks in the two sides, moreover, the broken development of surrounding rock, roof separation and extrusion deformation between the two sides of the roadway are all controlled; second, a prestressed belt of trapezoidal shape is generated in the surrounding rock by the cable-truss supporting system, and the prestress field range is wide. Especially, the prestress concentration belt in the shallow surrounding rock can greatly improve the anchoring strength and deformation resisting capability of the rock stratum;third, an optimized support system of ‘‘roof and side anchor net beam, roof cable-truss supporting system and anchor cable of the narrow coal pillar" was put forward, and the support optimization design and field industrial test were conducted for the gob-side entry driving of the working face 5302 in Tangkou Mine, from which a good supporting effect was obtained.     

Surrounding rock control of gob-side entry driving with narrow coal pillar and roadway side sealing technology in Yangliu Coal Mine

Gob-side entry driving can increase coal recovery ratio, and it is implied in many coal mines. Based on geological condition of 10416 working face tailentry in Yangliu Coal Mine, the surrounding rock deformation characteristics of gob-side entry driving with narrow coal pillar is analysed, reasonable size of coal pillar and reasonable roadway excavation time after mining are achieved. Surrounding rock control technology and effective roadway side sealing technology are proposed and are taken into field practice. The results showed that a safer and more efficient mining of working face can be achieved. In addition, results of this paper also have important theoretical significance and valuable reference for surrounding rock control technology of gob-side entry driving with narrow coal pillar under special geological condition.     

Failure laws of narrow pillar and asymmetric control technique of gob-side entry driving in island coal face

In allusion to the problems of complex stress distribution in the surrounding rock and deformation failure laws, as well as the difficulty in roadway supporting of the gob-side entry driving in the island coal face, 2107 face in Chengjiao Colliery is researched as an engineering case. Through physical mechanical test of rock, theoretical and numerical simulation analyses of rock, the analysis model of the roadway overlying strata structure was established, and its parameters quantified. To reveal the deformation law of the surrounding rock, the stability of the overlying strata structure was studied before, during and after the roadway driving. According to the field conditions, the stress distribution in coal pillar was quantified, and the surrounding rock deformation feature studied with different widths of the pillars in gob-side entry driving. Finally, the pillar width of 4 m was considered as the most reasonable. The research results show that there is great difference in support conditions among roadway roof, entity coal side and narrow pillar side. Besides, the asymmetric control technique for support of the surrounding rock was proposed. The asymmetric control technique was proved to be reasonable by field monitoring, support by bolt-net, steel ladder and steel wire truss used in narrow pillar side.     

Soft–strong supporting mechanism of gob-side entry retaining in deep coal seams threatened by rockburst

When gob-side entry retaining is implemented in deep coal seams threatened by rockburst, the cement-based supporting body beside roadway will bear greater roof pressure and strong impact load. Then the supporting body may easily deform and fail because of its low strength in the early stage. This paper established the roadside support mechanical model of gob-side entry retaining. Based on this model, we proposed and used the soft–strong supporting body as roadside support in the gob-side entry retaining. In the early stage of roof movement, the soft–strong supporting body has a better compressibility, which can not only relieve roof pressure and strong impact load, but also reduce the supporting resistance and prevent the supporting body from being crushed. In the later stage, with the increase of the strength of the supporting body, it can better support the overlying roof. The numerical simulation results and industrial test show that the soft–strong supporting body as roadside support can be better applied into the gob-side entry retaining in deep coal seams threatened by rockburst.     

深部巷道围岩控制原理与应用研究

采用理论分析、数值模拟和现场试验的方法，研究深部巷道围岩稳定问题，认为深部巷道围岩控制的基本方法是提高围岩强度、转移围岩高应力以及采用合理的支护技术．提出了深部巷道围岩控制的基本技术和控制过程：1）应力转移降低巷道浅部围岩应力；2）采用高预紧力、大延伸量的高强度锚杆、锚索支护系统，强化锚固区围岩强度，提高巷道围岩自身稳定性；3）加强巷道两帮、底角支护，提高巷道最薄弱部位（两帮、底角）残余强度、提高巷道围岩的整体稳定性；4）应用高水速凝材料注浆加固破碎区，提高破碎围岩的完整性和力学参数．该研究成果已成功应用于工程实践．     

Feasibility analysis of gob-side entry retaining on a working face in a steep coal seam

Based on the decline in exploitation of coal resources, steep coal seam mining and mining face tensions continue to explore the feasibility analysis of steeply inclined faces in the gob. One of the key factors in utilizing the technology of gob-side entry retaining in steep coal seams is to safely and effectively prevent caving rock blocks from rushing into the gob-side entry by sliding downwards along levels. Using theoretical analysis and field methods, we numerically simulated the mining process on a fully-mechanized face in a steep coal seam. The stress and deformation process of roof strata has been analyzed, and the difficulty of utilizing the technology is considered and combined with practice in a steep working face in Lvshuidong mine. The feasibility of utilizing the technology of gob-side entry retaining in a steep coal seam has been recognised. We propose that roadways along the left lane offshoot body use a specially-made reinforced steel dense net to build a dense rock face at the lower head. The results show that the lane offshoot branch creates effective roof control, safe conditions for roadway construction workers, and practical application of steeply inclined gob.     

Comparative study of model tests on automatically formed roadway and gob-side entry driving in deep coal mines

Automatically formed roadway(AFR) by roof cutting with bolt grouting(RCBG) is a new deep coal mining technology. By using this technology, the broken roadway roof is strengthened, and roof cutting is applied to cut off stress transfer between the roadway and gob to ensure the collapse of the overlying strata. The roadway is automatically formed owing to the broken expansion characteristics of the collapsed strata and mining pressure. Taking the Suncun Coal Mine as the engineering background, the control effect of this new technology on roadways was studied. To compare the law of stress evolution and the surrounding rock control mechanisms between AFR and traditional gob-side entry driving, a comparative study of geomechanical model tests on the above methods was carried out. The results showed that the new technology of AFR by RCBG effectively reduced the stress concentration of the roadway compared with gob-side entry driving. The side abutment pressure peak of the solid coal side was reduced by 24.3%, which showed an obvious pressure-releasing effect. Moreover, the position of the side abutment pressure peak was far from the solid coal side, making it more beneficial for roadway stability. The deformation of AFR surrounding rock was also smaller than the deformation of the gob-side entry driving by the overload test. The former was more beneficial for roadway stability than the latter under higher stress conditions. Field application tests showed that the new technology can effectively control roadway deformation. Moreover, the technology reduced roadway excavation and avoided resource waste caused by reserved coal pillars.     

Influence of dynamic pressure on deep underground soft rock roadway support and its application

Due to high ground stress and mining disturbance, the deformation and failure of deep soft rock roadway is serious, and invalidation of the anchor net-anchor cable supporting structure occurs. The failure characteristics of roadways revealed with the help of the ground pressure monitoring. Theoretical analysis was adopted to analyze the influence of mining disturbance on stress distribution in surrounding rock,and the change of stress was also calculated. Considering the change of stress in surrounding rock of bottom extraction roadway, the displacement, plastic zone and distribution law of principal stress difference under different support schemes were studied by means of FLAC3D. The supporting scheme of U-shaped steel was proposed for bottom extraction roadway that underwent mining disturbance. We carried out a similarity model test to verify the effect of support in dynamic pressure. Monitoring results demonstrated the change rules of deformation and stress of surrounding rock in different supporting schemes. The supporting scheme of U-shaped steel had an effective control on deformation of surrounding rock. The scheme was successfully applied in underground engineering practice, and achieved good technical and economic benefits.     

Rock burst mechanism analysis in an advanced segment of gob-side entry under different dip angles of the seam and prevention technology

In order to investigate the frequent occurrences of rock burst in gob-side entry during the mining process of the mining zone No. 7, the mechanical model of main roof of fully-mechanized caving mining before breaking was established by the Winkler foundation beam theory, and the stress evolution law of surrounding rock with different dip angles of the seam during the mining process was analyzed by using FLAC3 D. The results show that: with the dip angle changing from 45° to 0°, the solid-coal side of gobside entry begins to form an L-shaped stress concentration zone at a dip angle of 30°, and the stress concentration degree goes to higher and higher levels. However, the stress concentration degree of the coalpillar side goes to lower and lower levels; the influence range and peak stress of the abutment at the lateral strata of adjacent gob increase with dip angle decreasing and reach a maximum value at a dip angle of 0°, but the tailgate is not affected; the abutment pressure superposition of two adjacent gobs leads to stress concentration further enhancing in both sides of gob-side entry. With the influence of strong mining disturbance, rock burst is easily induced by dynamic and static combined load in the advanced segment of gob-side entry. To achieve stability control similar to that in the roadway, the key control strategy is to reinforce surrounding rock and unload both sides. Accordingly, the large-diameter drilling and high-pressure water injection combined unloading and reinforced support cooperative control technology was proposed and applied in field test. The results of Electromagnetic Emission(EME) and field observation showed that unloading and surrounding rock control effect was obvious.     

三软综放沿空锚网索支护巷道回采期间围岩变形特征

针对三软综放沿空巷道围岩大变形、难支护的特点,提出采用锚网索支护新技术,通过对试验巷道数值模拟以及表面位移、围岩深部位移和围岩应力的现场监测,分析了试验巷道矿压显现活动规律,掌握了试验巷道在锚网索支护下的围岩变形规律,这为锚网索支护在三软煤层巷道的推广应用和支护参数设计提供了科学依据.     

Spatiotemporal evolution rule of rocks fracture surrounding gob-side roadway with model experiments

A series of plane-strain physical model experiments are carried out to study the spatiotemporal evolution rule of rocks fracture surrounding gob-side roadway, which is subjected to the pressure induced by the mining process. The digital photogrammetry technology and large deformation analysis method are applied to measure the deformation and fracture of surrounding rocks. The experimental results indicate that the deformation and fracture of coal pillars are the cause to the instability and failure of the surrounding rocks. The spatiotemporal evolution rule of the rock deformation and fracture surrounding gob-side roadway is obtained. The coal pillar and the roof near coal pillar should be strengthened in support design. The engineering application results also can provide a useful guide that the combined support with wire meshes, beam, anchor bolt and cable is an effective method.     

无煤柱分阶段沿空留巷煤与瓦斯共采方法与应用

针对深井高瓦斯低透气性煤层群的典型赋存特征,结合淮南矿区千米深井无煤柱煤与瓦斯工程实践,提出了改进Y型通风模式,即分阶段沿空留巷方法,完善了对共采工程的维控预应力锚固技术.工程实践表明:预应力锚固技术可以实现深井强动压开采过程中对沿空留巷和回风巷道围岩稳定的有效维控,至第1阶段结束,留巷顶板下沉量为144mm,两帮移近量为351mm,分阶段沿空留巷对共采巷道的维护时间缩短了4/5.减少了留巷变形速度稳定后累计变形的不利影响.超前工作面布置的瓦斯抽采工程中,单孔抽采瓦斯浓度(体积分数)达到40%,实现了煤与瓦斯共采.     

Top-coal deformation control of gob-side entry with narrow pillars and its application for fully mechanized mining face

A mechanical model to control the top-coal deformation is established in accordance with the structural characters of the gob-side entry surrounding rock for the fully-mechanic top-coal caving; the analytical solution of top coal roof-sag curve is deduced with Winkler elastic foundation beam model. By means of a calculating and analytic program, the top coal roof-sag values are calculated under the conditions of different supporting intensities, widths of narrow pillars and stiffness of top coal; meanwhile, the relationship between the roof-sag values and supporting intensity, width of narrow pillars and stiffness of top coal is analyzed as well. With the actual situation of the gob-side entry taken into consideration, the parameters of top-coal control are determined and a supporting plan is proposed for the top-coal control,which is proved to be reliable and effective by on-site verification. Some theoretical guidance and advice are put forward for the top-coal deformation control in gob-side entry for fully mechanized top-coal caving face.     

Layout and support technology of entry for pillar face

In order to improve the recovery rate of coal, some mines have begun to recover the residual protective pillars in the form of short wall faces. However, it is difficult to control stability of the haulage entry and the ventilating entry under the mining influences of the pillar face and the two side faces. Thus the 4311 face, which was designed to recover the 57 m wide residual protective pillar in Guojiashan Coal Mine,was taken as engineering background. Distribution law of stress and plastic zone in the residual protective pillar was analyzed using the numerical simulation. Then the gob-side entry driving technology was proposed to layout the entries for the pillar face. Based on the analysis of stress distribution and deformation characteristics of surrounding rocks in gob-side entry driving with different width of narrow pillars, the width of the narrow pillar of the entries in the 4311 face was decided to be 4 m. In order to control stability of the gob-side entry driving, the mechanical model of the main roof was established and deformation characteristic of surrounding rock was analyzed. Then the bolt support technology with high strength and high pre-tightening force was proposed for entry support. Especially, the hydraulic expansion bolts were used to support the narrow pillar rib. The engineering results show that the width of the narrow pillar is reasonable and the entry support technology is effective. The research achievement can provide some references to pillar recovery for other coal mines.     

晋城矿区9号煤沿空留巷试验研究

结合具体条件进行了巷旁充填支护参数设计 ,在矿压观测基础上 ,分析了留巷围岩变形及充填体载荷特征 ,把高水速凝充填材料沿空留巷与炮掘及综掘成巷方法进行经济对比 ,结果表明 ,该留巷方法有明显技术和经济优势 ,在晋城矿区 9号煤中有很好推广应用价值 .     

Control mechanism and technique of floor heave with reinforcing solid coal side and floor corner in gob-side coal entry retaining

Floor heave is the most common convergence in gob-side entry retaining. The paper analyzes the form, process and characteristics of gob-side entry retaining with the comprehensive methods of theoretical analysis, numerical simulation and the field trial. Research results present that bending and folding floor heave is the main factor in the stage of the first panel mining; squeezing and fluidity floor heave plays a great role in the stable stage of gob-side entry retaining; the combination of the former two factors affects mainly the stage of the second mining ahead; abutment pressure is a fundamental contribution to the serious floor heave of gob-side entry retaining, and sides corners of solid coal body are key part in the case of floor heave controlling of gob-side entry retaining. Floor heave of gob-side entry retaining can be significantly controlled by reinforcing sides and corners of solid coal body, and influence rules on the floor heave of gob side entry retaining of sides supporting strength and the bottom bolt orientation in solid coal side are obtained. Research results have been successfully applied in gob-side entry retaining of G20-F23070 face haulage roadway in #2 coal mine of Pingmei Group, and the field observation shows that the proposed technique is an effective way in controlling the floor heave of gob-side entry retaining.     

综放回采巷道围岩力学特征实测研究

通过对综放面回采巷道围岩的深部位移、表面位移、应力分布以及支架荷载的实测分析，得出综放面回采巷道围岩力学特征分布规律．研究表明，临近工作面巷道围岩处于支承压力降低区，支架荷载下降，但支架和围岩变形最剧烈，表明巷道围岩处于岩石峰后的力学状态．围岩变形主要发生支承压力影响区，合理的巷道支护应能控制采动影响剧烈阶段的围岩变形，顺槽支护设计理念应从载荷控制向变形控制转变．     

Stability of coal pillar in gob-side entry driving under unstable overlying strata and its coupling support control technique

Considering the situation that it is difficult to control the stability of narrow coal pillar in gob-side entry driving under unstable overlying strata, the finite difference numerical simulation method was adopted to analyze the inner stress distribution and its evolution regularity, as well as the deformation characteristics of narrow coal pillar in gob-side entry driving, in the whole process from entry driving of last working face to the present working face mining. A new method of narrow coal pillar control based on the triune coupling support technique (TCST), which includes that high-strength prestressed thread steel bolt is used to strain the coal on the goaf side, and that short bolt to control the integrity of global displacement zone in coal pillar on the entry side, and that long grouting cable to fix anchor point to constrain the bed separation between global displacement zone and fixed zone, is thereby generated and applied to the field production. The result indicates that after entry excavating along the gob under unstable overlying strata, the supporting structure left on the gob side of narrow coal pillar is basically invalid to maintain the coal-pillar stability, and the large deformation of the pillar on the gob side is evident. Except for the significant dynamic pressure appearing in the coal mining of last working face and overlying strata stabilizing process, the stress variation inside the coal pillar in other stages are rather steady, however, the stress expansion is obvious and the coal pillar continues to deform. Once the gob-side entry driving is completed, a global displacement zone on the entry side appears in the shallow part of the pillar, whereas, a relatively steady fixed zone staying almost still in gob-side entry driving and present working face mining is found in the deep part of the pillar. The application of TCST can not only avoid the failure of pillar supporting structure, but exert the supporting capacity of the bolting structure left in the pillar of last sublevel entry, thus to jointly maintain the stability of coal pillar.     

软岩巷道破裂特征与分阶段分区域控制研究

解决软岩巷道维护问题的关键在于准确把握该类巷道围岩内部裂隙发展演化规律和破裂特征.以某矿典型的软岩巷道为研究对象,实验研究了巷道围岩组份及微结构的特征;现场测试了巷道围岩内部破裂发展过程和规律,得到了典型软岩巷道围岩内部裂隙扩展贯通具有阶段性和非均匀性的破裂特征;根据巷道破裂发展的时间效应和区域特征,提出了分阶段、分区域控制的关键技术,包括:分阶段喷射混凝土、锚杆(索)强力支护、围岩注浆加固的过程控制和重点部位的加强支护技术.现场工程实践表明,针对软岩巷道破裂特征的分阶段控制技术可以有效控制软岩巷道的围岩变形破裂的发展,实现该类巷道的围岩稳定.