共查询到20条相似文献,搜索用时 93 毫秒
1.
设计了一种新型的基本极于极坐标二值模糊逻辑规则的模糊逻辑二级电压控制器,该控制器有效地将模糊逻辑规则和二次电压控制相结合:将引导节点的电压偏差及其微分作为模糊逻辑控制规则的前项输入,与规则作用后,推理出相应的电压控制信号,然后引入比例积分器,得到区域无功控制信号,通过发电机的励磁控制,实现对引导节点电压的控制,该控制器通过引入控制发电机的参与因子,实现了区域内各控制发电机之间的相互协调和补充。以New England39节点系统为例进行仿真出发,结果表明:所设计的二级电压控制器在系统发生电压扰动的期间,能够从区域电压稳定的角度出发,调整各级电压控制器的电压参考值从而调整其无功出力,为系统提供所需的电压支持,使得系统的负荷电压水平维持在较好的状态,提高了系统的电压稳定性,它比常规PID二级电压控制器具有更好的控制性能。 相似文献
2.
新型模糊逻辑二级电压控制器 总被引:2,自引:0,他引:2
摘要: 设计了一种新型的基于极坐标二值模糊逻辑规则的模糊逻辑二级电压控制器。该控制器有效地将模糊逻辑规则和二次电压控制相结合:将引导节点的电压偏差及其微分作为模糊逻辑控制规则的前项输入,与规则作用后,推理出相应的电压控制信号,然后引入比例积分器,得到区域无功控制信号,通过发电机的励磁控制,实现对引导节点电压的控制。该控制器通过引入控制发电机的参与因子,实现了区域内各控制发电机之间的相互协调和补充。以New England 39节点系统为例进行仿真计算,结果表明:所设计的二级电压控制器在系统发生电压扰动的期间,能够从区域电压稳定的角度出发,调整各级电压控制器的电压参考值从而调整其无功出力,为系统提供所需的电压支持,使得系统的负荷电压水平维持在较好的状态,提高了系统的电压稳定性。它比常规PID二级电压控制器具有更好的控制性能。 相似文献
3.
基于广域测量的双模糊励磁控制 总被引:1,自引:0,他引:1
设计了一种基于广域测量的双模糊励磁控制器,其主模糊控制器采用发电机端电压和参考电压的偏差及其变化率作为输入,辅模糊控制器采用发电机角频率与惯性中心角频率的偏差及其变化率作为输入,从而使励磁控制器可以反映全局信息。基于Matlab的电力系统工具箱和模糊逻辑工具箱,对4机系统进行了数字仿真,其中励磁调节器采用的控制方法分别为PID、PID PSS和双模糊控制。仿真结果证明与常规的励磁控制方法相比,所提出的基于广域测量的双模糊励磁控制方法可以加强系统承受大扰动的能力,进一步提高系统的暂态稳定性。 相似文献
4.
为了改善发电机励磁控制系统的动态调节品质,运用模糊规则设计了一种发电机励磁系统的模糊控制器,并给出了基于西门子可编程逻辑控制器(PLC)的模糊控制器的实现方法。仿真和试验结果表明,控制器在改善发电机励磁系统的动态行为上具有突出的优势,对工程应用有实用价值。 相似文献
5.
为了改善发电机励磁控制系统的动态调节品质,运用模糊规则设计了一种发电机励磁系统的模糊控制器,并给出了基于西门子可编程逻辑控制器(PLC)的模糊控制器的实现方法。仿真和试验结果表明,控制器在改善发电机励磁系统的动态行为上具有突出的优势,对工程应用有实用价值。 相似文献
6.
双馈发电机励磁模糊控制实验研究 总被引:1,自引:0,他引:1
将模糊控制用于双馈发电机,根据其磁场定向矢量变换控制特点,得出交流励磁变速恒频控制方法。在基于TMS320LF2812的双馈发电机系统实验平台上,使用C语言编写模糊控制器程序,在有功功率控制环节中以转速偏差和转速偏差变化率作为模糊控制器输入量,转子电流分量作为输出量。根据实验调试,合理选取论域及语言变量值,确定模糊控制规则,进行模糊推理计算,得到模糊控制器输出的精确值。在此基础上,进行了双馈发电机变速恒频控制实验,实验结果表明了模糊控制器设计的正确性。 相似文献
7.
8.
新型模糊逻辑励磁控制器的研究 总被引:9,自引:3,他引:6
研究了一种新型模糊逻辑励磁控制器,它有一个电压控制模块和一个阻尼控制模块,两个模块的输入信号分别为发电机端电压和电功率,采用相同的模糊逻辑控制规律。仿真研究表明,它比常规及线性最优励磁控制器具有更好的控制性能,易于实际应用。 相似文献
9.
10.
11.
12.
13.
14.
Improving the transient response of power generation systems using automation control in a precise manner is the key issue. We design a fuzzy proportional integral derivative (PID) controller using Matlab and programmable logic controllers (PLCs) for a set point voltage control problem in the automatic voltage regulator (AVR) system. The controller objective is to maintain the terminal voltage all the time under any loads and operational conditions by attaining to the desired range via the regulation of the generator exciter voltage. The main voltage control system uses PLCs to implement the AVR action. The proposed fuzzy controller combines the genetic algorithm (GA), radial-basis function network (RBF-NN) identification and fuzzy logic control to determine the optimal PID controller parameters in AVR system. The RBF tuning for various operating conditions is further employed to develop the rule base of the Sugeno fuzzy system. The fuzzy PID controller (GNFPID) is further designed to transfer in PLCs (STEP 75.5) for implementing the AVR system with improved system response. An inherent interaction between two generator terminal voltage control and excitation current is revealed. The GNFPID controller configures the control signal based on interaction and there by reduces the voltage error and the oscillation in the terminal voltage control process. We achieve an excellent voltage control performance by testing the proposed fuzzy PID controller on a practical AVR system in synchronous generator for improve the transient response. 相似文献
15.
16.
安全稳定是电力系统运行的基本条件,提高励磁系统的控制性能,对同步发电机和电力系统的安全稳定运行都有着重要意义。利用PID良好的电压调节特性,并结合线性最优励磁控制器(LOEC)良好的动态和阻尼特性,建立了PID+LOEC模糊协调励磁控制器。根据系统状态的变化,模糊控制器可以通过加权系数协调控制PID和LOEC的输出,从而提高对系统状态变化的自适应能力。通过在Simulink中建立系统仿真模型,把基于模糊控制器的PID+LOEC协调控制分别和PID、LOEC做了比较,结果显示,基于模糊控制的协调控制策略,具 相似文献
17.
提出了一种基于协同控制理论的非线性励磁控制器。首先依据同步发电机励磁控制的基本要求和特点,选择机端电压、有功功率和转子角速度三个变量的偏差的线性组合构成流形,以保证有效控制机端电压和抑制系统功率振荡。然后以同步发电机非线性模型为对象,推导出了非线性协同励磁控制器(Synergetic excitation controller,SEC)的控制律,并根据电力系统的运行特性,探讨了控制器参数的选取原则。最后,单机无穷大系统仿真结果表明,无论在大扰动还是在小扰动下,所提非线性协同励磁控制器比常规的AVR+PSS方式下的励磁控制器都能更快更精确地调节机端电压,还能够有效地抑制系统的功率振荡。 相似文献
18.
Due to the increment of penetration level of wind power generation, output power fluctuation is one of the most important issue's that can destabilize the power system operation. This article mainly deals with the smoothing of the output power fluctuations of a wind energy conversion system based permanent magnet synchronous generator and fault ride-through enhancement during a grid fault. The concerned wind energy conversion system based permanent magnet synchronous generator adopts an AC-DC-AC converter system. The proposed control method limits the wind energy conversion system output power by adjusting the pitch angle of the wind turbine blades when wind speed is above the rated wind speed. In the grid-side converter, a fuzzy logic controller is used to determine the torque reference for which the kinetic energy stored by the inertia of wind turbine can smooth the output power fluctuations of the permanent magnet synchronous generator. Also, the DC-link voltage, controlled by the grid-side inverter, is adjusted in accordance with the output power fluctuations of the permanent magnet synchronous generator using a voltage smoothing index. Moreover, in this aticle, the proposed method ensures that the wind turbine stays operational during grid faults and provides fast restoration once the fault is cleared. To show the effectiveness of the proposed method, simulations under different conditions have been performed by using MATLAB/Simulink® (The Math Works, Natick, MA, USA). 相似文献
19.
20.
本文采用最小二乘估计方法对多机电力系统的频谱进行拟合。根据不同阶次模型的拟合误差的大小即可确定对某台发电机采用几阶模型最为合适。这对多机电力系统中同步发电机的励磁控制器设计具有一定的指导意义。对一个实际电力系统的计算表明:多机电力系统中一般的同步发电机采用3阶模型是合适的;对于转动惯量相当大的机组可采用2阶模型。 相似文献