High‐speed pixel circuits for large‐sized 3‐D AMOLED displays

Abstract— Large‐sized active‐matrix organic light‐emitting diode (AMOLED) displays require high‐frame‐rate driving technology to achieve high‐quality 3‐D images. However, higher‐frame‐rate driving decreases the time available for compensating Vth in the pixel circuit. Therefore, a new method needs to be developed to compensate the pixel circuit in a shorter time interval. In this work, image quality of a 14‐in. quarter full‐high‐definition (qFHD) AMOLED driven at a frame rate of over 240 Hz was investigated. It was found that image degradation is related to the time available for compensation of the driving TFT threshold voltage. To solve this problem, novel AMOLED pixel circuits for high‐speed operation are proposed to compensate threshold‐voltage variation at frame rates above 240 Hz. When Vth is varied over ±1.0 V, conventional pixel circuits showed current deviations of 22.8 and 39.8% at 240 and 480 Hz, respectively, while the new pixel circuits showed deviations of only 2.6 and 5.4%.     

An active‐matrix organic light‐emitting‐diode pixel circuit for the compensation of I × R voltage drop in power line

Abstract— A new voltage‐driving active‐matrix organic light‐emitting diode (AMOLED) pixel circuit is proposed to improve the display image‐quality of AMOLED displays. Because OLEDs are current‐driven devices, the I × R voltage drop in the power lines is evitable. Accordingly, the I × R voltage‐drop compensation scheme should be included in the pixel‐driving method when a voltage‐compensation method is used. The proposed pixel was designed for the compensation of an I × R voltage drop in the power lines as well as for the compensation of the threshold‐voltage non‐uniformity of low‐temperature polycrystalline‐silicon thin‐film transistors (LTPS TFTs). In order to verify the compensation ability of the proposed pixel, SPICE simulation was performed and compared with those of other conventional pixels. When the Vss voltage varies from 0 to 1 V, the drain current of the proposed pixel decreased by under 1% while that of conventional Vth compensation methods without Vss compensation decreased by over 60%. 2.2‐in. QCIF⁺ full‐color AMOLED displays, which employ the proposed pixel, have been also developed. It was verified by comparison of the display image quality with a conventional panel that our proposed panel successfully overcame the voltage‐drop problems in the power lines.     

High‐visibility 2‐D/3‐D LCD with HDDP arrangement and its optical characterization methods

Abstract— A 3.1‐in.‐diagonal 2‐D/3‐D LCD with a novel pixel arrangement, called horizontally double‐density pixels (HDDP), for high‐quality 3‐D images has been developed. 3‐D visibility has been improved by broadening the qualified stereoscopic viewing space (QSVS) where high‐quality 3‐D images can be seen. In order to evaluate the QSVS, optical characterization methods, based on the ergonomics for stereoscopy, such as 3‐D crosstalk, interocular luminance difference and 3‐D moiré have been proposed. The implementation results show that these methods can correctly evaluate high‐visibility autostereoscopic displays.     

Characterization and compensation of OLED aging in a digital AMOLED system

Organic light‐emitting diode (OLED) aging is the root cause for image sticking artifact and considered as the toughest problem besides the low yield problem of active‐matrix organic light‐emitting diode (AMOLED) displays. Digital driving can eliminate Mura artifact and allow a similar yield like LCD. However, it is more prone to OLED aging than analog driving, so that the lifetime will become shorter. In this paper, we pursue the approach to measure the pixel current and compensate OLED I–V drift. Information gained from electrical measurements during the lifetime of the display may be correlated to electro‐optical drift, particularly the current efficiency. The aging model has to consider the dependence of I–V drift and efficiency loss on the operation point/voltage for each subframe. Specific compensation algorithms have been developed. Two AMOLED prototypes (1.5 and 2.8 in.) were validated. Burned‐in pattern can be compensated, so the concept has been proven as effective. With the method described in this paper, digital AMOLED may reach a similar and even significantly higher lifetime than an analog AMOLED.     

Novel analog feedback current programming architecture compatible with 2‐transistor 1‐capacitor pixel for active matrix organic light‐emitting diode displays

A new feedback current programming architecture is described, which is compatible with active matrix organic light‐emitting diode (AMOLED) displays having the 2T1C pixel structure. The new pixel programming approach is compatible with all TFT technologies and can compensate for non‐uniformities in both threshold voltage and carrier mobility of the pixel OLED drive TFT. Based on circuit simulations, a pixel drive current of less than 10 nA can be programmed in less than 50 µ. This new approach can be implemented within an AMOLED external or integrated display data driver.     

Full‐color AMOLED with RGBW pixel pattern

Abstract— A full‐color AMOLED display with an RGBW color filter pattern has been fabricated. Displays with this format require about one‐half the power of analogous RGB displays. RGBW and RGB 2.16‐in.‐diagonal displays with average power consumptions of 180 and 340 mW, respectively, were characterized for a set of standard digital still camera images at a luminance of 100 cd/m². In both cases, a white‐emitting AMOLED was used as the light source, and standard LCD filters were used to provide the R, G, and B emission. The color gamuts of these displays were identical and the higher overall efficiency of the RGBW format results from two factors. First, a large fraction of a typical image is near neutral in color and can be reproduced using the white sub‐pixel. Second, the white sub‐pixel in an RGBW AMOLED display is highly efficient because of the absence of any color filter. The efficiency of these displays can be further enhanced by choosing a white emitter optimized to the target display white point (in this case D65). A two‐emission layer configuration based upon separate yellow and blue‐emitting regions is shown to be well suited for both the RGBW and RGB formats.     

Vt Compensated voltage‐data a‐Si TFT AMOLED pixel circuits

Abstract— Active‐matrix organic light‐emitting‐diode (AMOLED) displays are now entering the marketplace. The use of a thin‐film‐transistor (TFT) active matrix allows OLED displays to be larger in size, higher in resolutions and lower in power dissipation than is possible using a conventional passive matrix. A number of TFT active‐matrix pixel circuits have been developed for luminance control, while correcting for initial and electrically stressed TFT parameter variations. Previous circuits and driving methods are reviewed. A new driving method is presented in which the threshold‐voltage (V_t) compensation performance, along with various circuit improvements for amorphous‐silicon (a‐Si) TFT pixel circuits using voltage data, are discussed. This new driving method along with various circuit improvements is demonstrated in a state‐of‐the‐art 20‐in. a‐Si TFT AMOLED HDTV.     

Amorphous‐oxide TFT backplane for large‐sized AMOLED TVs

Abstract— Amorphous‐oxide thin‐film‐transistor (TFT) arrays have been developed as TFT backplanes for large‐sized active‐matrix organic light‐emitting‐diode (AMOLED) displays. An amorphous‐IGZO (indium gallium zinc oxide) bottom‐gate TFT with an etch‐stop layer (ESL) delivered excel lent electrical performance with a field‐effect mobility of 21 cm²/V‐sec, an on/off ratio of >10⁸, and a subthreshold slope (SS) of 0.29 V/dec. Also, a new pixel circuit for AMOLED displays based on amorphous‐oxide semiconductor TFTs is proposed. The circuit consists of four switching TFTs and one driving TFT. The circuit simulation results showed that the new pixel circuit has better performance than conventional threshold‐voltage (VTH) compensation pixel circuits, especially in the negative state. A full‐color 19‐in. AMOLED display with the new pixel circuit was fabricated, and the pixel circuit operation was verified in a 19‐in. AMOLED display. The AMOLED display with a‐IGZO TFT array is promising for large‐sized TV because a‐IGZO TFTs can provide a large‐sized backplane with excellent uniformity and device reliability.     

An AMOLED pixel circuit for high image quality of 1000 ppi mobile displays in AR and VR applications

In this paper, an active‐matrix organic light‐emitting diode pixel circuit is proposed to improve the image quality of 5.87‐in. mobile displays with 1000 ppi resolution in augmented and virtual reality applications. The proposed pixel circuit consisting of three thin‐film transistors (TFTs) and two capacitors (3T2C) employs a simultaneous emission driving method to reduce the number of TFTs and the emission current error caused by variations in threshold voltage (Vth) and subthreshold slope (SS) of the low‐temperature polycrystalline silicon TFTs. Using the simultaneous emission driving method, the compensation time is increased to 90 μs from 6.5 μs achieved in the conventional six TFTs and one capacitor (6T1C) pixel circuit. Consequently, the emission current error of the proposed 3T2C pixel circuit was reduced to ±3 least significant bit (LSB) from ±12 LSB at the 32nd gray level when the variations in both the Vth and SS are ±4σ. Moreover, both the crosstalk errors due to the parasitic capacitances between the adjacent pixel circuits and due to the leakage current were achieved to be less than ±1 LSB over the entire gray level. Therefore, the proposed pixel circuit is very suitable for active‐matrix organic light‐emitting diode displays requiring high image quality.     

A new current‐mirror pixel circuit employing poly‐Si TFTs for active‐matrix organic light‐emitting‐diode displays

Abstract— A novel active‐matrix organic light‐emitting‐diode (AMOLED) display employing a new current‐mirror pixel circuit, which requires four‐poly‐Si TFTs and one‐capacitor and no additional signal lines, has been proposed and sucessfully fabricated. The experimental results show that a new current mirror can considerably compensate luminance non‐uniformity and scale down a data current more than a conventional current‐mirror circuit in order to reduce the pixel charging time and increase the minimum data current. Compared with a conventional two‐TFT pixel, the luminance non‐uniformity induced by the grain boundaries of poly‐Si TFTs can be decreased considerably from 41% to 9.1%.     

Ultra‐high‐resolution 1058‐ppi OLED displays with 2.78‐in size using CAAC‐IGZO FETs with tandem OLED device and single OLED device

We fabricated new 2.78‐in 1058‐ppi organic light‐emitting diode (OLED) displays. The displays used OLED devices with a tandem structure and a single structure and a field effect transistor (FET) using c‐axis aligned crystalline In–Ga–Zn–O (CAAC‐IGZO) for an active layer and employing the 1.5‐µm rule over a glass substrate. Even in the displays with such high resolution exceeding 1000 ppi, crosstalk that was observed in the lower luminance region was suppressed. The displays achieved high color reproducibility and reduced viewing angle dependence.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

An integrated poly‐Si TFT current data driver with a data‐line pre‐charge function

Abstract— We have developed an integrated poly‐Si TFT current data driver with a data‐line pre‐charge function for active‐matrix organic light‐emitting diode (AMOLED) displays. The current data driver is capable of outputting highly accurate (±0.8%) current determined by 6‐bit digital input data. A novel current‐programming approach employing a data‐line pre‐charge function helps achieve accurate current programming at low brightness. A 1.9‐in. 120 × 136‐pixel AMOLED display using these circuits was demonstrated.     

High resolution photolithography for direct view active matrix organic light‐emitting diode augmented reality displays

High‐resolution RGB organic light‐emitting diode frontplane is a key enabler for direct‐view transparent augmented reality displays. In this paper, we demonstrate 1250 ppi passive displays and semi‐transparent active displays. Organic light‐emitting diode photolithography can provide pixel density above 1000 ppi while keeping effective emission area high because of high aperture ratio. Patterns with 2 μm line pitch were successfully transferred to emission layers, indicating possible further pixel density scaling. Lifetime after patterning, key parameter enabling industrialization, is above 150 h (T90 at 1000 nit).     

A pixel structure for simultaneous programming and emission method for shutter‐glasses‐type stereoscopic 3‐D AMOLED displays

Abstract— A pixel structure for shutter‐glasses‐type stereoscopic 3‐D active‐matrix organic light‐emitting‐diode (AMOLED) displays is proposed. The proposed pixel programs data to the pixel during the light‐emission time of an OLED. Because the emission time of the proposed pixel is extended, it is expected that the proposed pixel not only decreases the peak current of the OLED during the emission period but also reduces flicker. Moreover, the aperture ratio of the proposed pixel is 58.69% for a 50‐in. full‐high‐definition (FHD) condition by minimizing the number of thin‐film transistors (TFTs), capacitors, and control signal lines as seven TFTs, two capacitors, two power lines, and four control lines per unit pixel. Simulation results show that the error in the emission current of the proposed pixel is from ?0.82% to +0.90% when the threshold‐voltage variation of the driving TFT is ±1.00 V, and the maximum variation of the emission current is ?1.35% when a voltage drop in the power line is ?0.50 V on a full‐white‐image display.     

Pixel structures using the negative feedback method for high‐resolution active matrix organic light‐emitting diode displays

Novel two pixel structures are proposed for high‐resolution active matrix organic light‐emitting diode displays. The proposed two pixels (pixel structures A and B) use the negative feedback method for high‐resolution displays that requires to have small‐sized storage capacitance. The proposed pixel structures A and B improve the luminance uniformity by reducing the voltage distortion in the storage capacitor. However, the proposed pixel structure A is vulnerable to the organic light‐emitting diode (OLED) degradation because the anode voltage of the OLED affects the emission current. In order to compensate the OLED degradation, the proposed pixel structure B stores the turn‐on voltage of OLEDs in the storage capacitor. The simulation results show that the emission current error of the proposed pixel structure B is improved by four times in comparison with the proposed pixel structure A when the OLED turn‐on voltage increases by 0.1 V. Also, the emission current error of the proposed pixel structure B when the threshold voltage of driving thin‐film transistors varies from ?2.2 to ?1.8 V is from ?0.69 least significant bit (LSB) to 0.13 LSB, which shows the excellent luminance uniformity. The proposed pixels are designed for 5.5‐in. full high‐definition displays.     

A 5.5‐inch full HD foldable AMOLED display based on neutral‐plane splitting concept

Splitting of the mechanical neutral plane is a promising concept for foldable displays because it reduces the folding stress in each layer of the display. We verified the splitting concept experimentally and revealed a linear relation between the relative position of the neutral plane and the logarithm of the adhesive's elastic modulus. As the modulus decreased, the position of the neutral plane approached that of perfect splitting. On the basis of the neutral‐plane splitting concept, we developed 5.5‐inch full high‐definition foldable active matrix organic light‐emitting diode (AMOLED) displays, which endured 150 k inward folding cycles and 150 k outward folding cycles with folding radii of 3 and 5 mm, respectively. This study is expected to improve the flexibility of designing foldable AMOLED displays, enabling better balance of the portability versus practicality trade‐off in mobile displays.     

Color reproduction with a various number of sub‐pixels

Monochrome reflective‐type displays are widely used for portable reading applications such as electric papers because this type does not need a back light unit and can be used outdoors for a long time. Color reflective‐type displays without back light units are desired to expand the market further. The current color reproduction is based on three sub‐pixel red, green and blue (RGB) methods, and when used in reflective type, its luminance is reduced to a third of that of monochrome type. Adding a white sub‐pixel to the current method can improve the luminance, making the sub‐pixel number four. However, in the case of a high resolution display with a four‐sub‐pixel method, the pixel structure is complex, and the luminance improvement may be limited. Instead of increasing the sub‐pixel number, two sub‐pixel methods are investigated. These methods can improve luminance with limited color gamut. The performances are compared with those of other methods quantitatively.     

Pixel circuits and drive schemes for glass and elastic AMOLED displays

Abstract— Flexible AMOLED displays pose unique opportunities and challenges for a‐Si. Leveraging the existing a‐Si process infrastructure is the fastest and lowest‐cost route to flexible AMOLEDs. However, the displays must maintain high performance, long lifetimes, and high uniformity despite low‐temperature processes and mechanical stress. New pixel circuits and drive schemes shown here demonstrate that high‐performance flexible AMOLED displays are possible using well‐established a‐Si technology.     

A crosstalk model and its application to stereoscopic and autostereoscopic displays

We propose a model to quantify the crosstalk phenomenon for stereoscopic and autostereoscopic displays, separate crosstalk contributed from co‐location image contrast (CIC) and system crosstalk (SCT), introduce gray scale dependency of CIC, modify model for gray scale dependency of SCT in active type 3D displays, and apply the model to derive the 3D luminance and SCT measurement formulas. The model might serve as a basis for the 3D metrology, and the results of this research should be of reference value to hardware makers and inspectors of stereoscopic and autostereoscopic displays.