充液箱位置对航天器耦合特性影响分析

分析了液体非线性晃动时充液箱位置对带弹性帆板充液航天器刚-液-弹之间耦合特性的影响.假设耦合系统绕系统质心做俯仰运动,首先采用已推导的刚-液-弹耦合系统俯仰运动非线性动力学方程组,得到系统固有频率,给出固有频率简单近似解析表达式,分析充液箱位置对系统各阶固有频率的影响.随后应用多尺度法对耦合系统液体一阶主共振进行解析分析,发现充液箱位置是决定幅频曲线软、硬特性转换点的重要参数.给定外激励力矩时,不同充液箱位置稳态解对应多解现象,并随着激励频率改变,稳态解幅值随充液箱位置的变化曲线发生分岔.     

考虑刚-柔-热耦合的板结构多体系统的动力学建模

对热载荷作用下中心刚体与大变形薄板多体系统的动力学建模问题进行研究.基于Kirchhoff假设,从格林应变和曲率与绝对位移的非线性关系式出发,推导了非线性广义弹性力阵,用绝对节点坐标法建立了大变形矩形薄板的有限元离散的动力学变分方程.为了考虑刚体姿态运动、弹性变形和温度变化的相互耦合作用,推导了热流密度与绝对节点坐标之间的关系式.引入系统的运动学约束方程,建立了中心刚体-矩形板多体系统的考虑刚-柔-热耦合的热传导方程和带拉格朗日乘子的第一类拉格朗日动力学方程.为了有效地提高计算效率,将改进的中心差分法和广义-α法相结合,求解热传导方程和动力学方程,差分后的方程通过牛顿迭代法耦合求解.对刚-柔耦合和刚-柔-热三者耦合两种模型的仿真结果进行比较表明,刚体运动对温度梯度和热变形的影响显著.此外,本文建模方法考虑了几何非线性项,因此也考虑了热膨胀引起的轴向变形对横向变形的影响.     

充液航天器姿态的自适应非线性动态逆控制

讨论了充液航天器大角度姿态机动自适应非线性动态逆控制设计.推导了航天器-液体晃动耦合系统动力学方程.采用单摆等效力学模型对液体燃料晃动进行动力学建模.由于充液航天器控制系统的强耦合非线性,故采用神经网络构造系统的自适应非线性动态逆控制器.通过实际算例对该控制器的跟综性能进行了测试,结果证明该自适应非线性动态逆控制器在包...     

考虑几何非线性和热效应的刚柔耦合系统的频域特性研究

研究温度场中旋转刚体-梁系统的刚-柔耦合动力学特性.考虑几何非线性和热效应,从精确的应变-位移关系式出发,用虚功原理和有限单元法建立了旋转刚体-梁系统的刚-柔耦合动力学方程.由于非线性刚度阵与变形的高次项有关,将非线性刚度阵的各元素表示为广义坐标阵和常值阵的乘积.数值计算表明,该方法可避免重复积分,提高计算效率.在此基础上研究了在温度递增的情况下几何非线性对系统的刚-柔耦合动力学特性的影响,用频谱分析方法研究了系统的固有频率随中心刚体转动惯量和温度的变化.     

哑铃型航天器刚-柔耦合动力学建模与仿真分析

为满足深空探测的需求,需要构建一种全新的哑铃型航天器.由于构型和质量分布的差异,传统"中心刚体+柔性附件"动力学模型将不再适用,因此必须针对该构型建立一种高效准确的动力学模型.本文基于小变形假设,利用浮动坐标法,采用多体系统动力学单向递推组集方法,建立了哑铃型航天器的刚-柔耦合动力学模型.该模型考虑了哑铃型航天器的轨道-姿态-变形之间的耦合效应,保留了全部变形高次耦合项.通过采用本文方法建立的"刚体-桁架-刚体"模型和已有的两种哑铃型航天器模型,对典型算例进行动力学仿真和比较.仿真结果表明,本文模型很好地反映了哑铃型航天器的刚-柔耦合动力学特性,末端物体的转动惯量将会影响系统的动力学响应,不能简单忽略.本研究将为哑铃型航天器的总体设计,特别是控制规律的设计,提供重要的技术支持.     

输入饱和的充液航天器抗干扰有限时间滑模控制

研究三轴稳定充液航天器姿态控制过程中存在外部未知干扰、参数不确定和输入饱和的问题,提出一种抗干扰有限时间滑模控制的姿态机动控制方法.将部分充液贮箱内液体燃料晃动等效为球摆模型,采用动量矩守恒定律推导出充液航天器耦合动力学方程.首先,设计有限时间积分滑模干扰观测器,保证控制系统中集总干扰可以在有限时间内被估计;然后,基于所设计的干扰观测器,提出一种抗干扰有限时间快速终端滑模控制策略,并且证明在该控制律的作用下闭环系统的状态是有限时间稳定的,而且收敛到指定的快速终端滑模面上.此外,通过引入辅助变量补偿控制输入超调量,克服输入饱和的约束.仿真结果验证了该控制策略的有效性和鲁棒性.     

微重力环境下刚液耦合系统液体晃动混沌现象研究

微重力下,柱形贮箱内液体晃动的速度势模态和表面位移模态难以解析表达,为揭示液-刚耦合运动的非线性特性,不失一般性地用常重力下液体晃动的速度势模态和表面位移模态近似表示微重力下液体晃动的速度势模态和表面位移模态.用泰勒级数展开法分析了微重力下柱形贮箱内的液体晃动,运用Lagrange方法导出了微重力下贮箱内液体与结构耦合系统的无量纲动力学方程组,并用Matlab软件对该方程组进行数值计算,发现当系统稳定时,面内、外模态分别具有同类的稳态动力学行为,包括静止、周期运动、准周期运动和混沌运动;在不同的外激励参数下,面内、外模态的稳态动力学行为发生变化.     

Spar平台月池水晃动的等效力学模型及模型参数研究

研究深海Spar平台月池水晃动的等效力学模型,确定模型参数.基于势流理论推导了月池内水体运动的动力学方程,建立了月池内水体晃动的等效单摆模型.采用ANSYS软件建立模型并进行网格划分,采用Matlab软件进行数值计算.运用Galerkin方法求解水体晃动的固有频率、模态函数以及势函数离散解,确定等效单摆模型的模型参数.对比分析了数值模拟结果与解析解,验证了本文计算方法的正确性.建立了不同月池水高度的等效力学模型参数库,为进一步研究平台-月池内流体的耦合运动奠定了基础.     

基于拉格朗日描述的罐车内液体晃动模拟

基于拉格朗日描述的柔性多体系统动力学理论,采用绝对节点坐标有限元方法描述液体大变形运动,开展铁路液罐车内液体晃动模拟研究.本方法能够模拟液体自由表面的连续性变化,并适用于研究具有复杂外形容器的内部液体晃动问题.基于流体力学牛顿体基础理论,推导液体粘性方程和满足体积不可压缩的条件方程;采用基于绝对节点坐标方法描述的实体单元进行液体网格划分;采用罚函数方法描述液体与罐体之间的接触关系,组建液体-罐体耦合多体系统动力学方程.仿真计算液罐车内液体的横向和纵向晃动行为,发现液体自由表面形状呈非线性变化,不同断面处的高度和形状不同.     

基于SPH方法的弹性体贮箱内液体晃动特性分析

采用Abaqus中的光滑粒子流体动力学(Smoothed Particle Hydrodynamics,SPH)求解器分析贮箱液体晃动.通过理论解验证SPH算法分析液体晃动的可行性;考察贮箱模型分别为弹性体和刚体时的压力变化,可知刚体贮箱的峰值压力比弹性体的大且其峰值出现更早;考虑贮箱为弹性体,研究在各因素下充液贮箱的晃动特性,包括充液量、晃动转角、液体材料属性和周期等.当贮箱充液量为2/3左右时,贮箱受液体晃动影响最明显;随着晃动转角的增大或周期减小,贮箱结构变形显著增大;液体材料属性对贮箱的影响有限.     

Call for Papers The 6^th International Conference on Grid and Cooperative Computing

Recent years have seen rapid advances in various grid-related technologies, middleware, and applications. The GCC conference has become one of the largest scientific events worldwide in grid and cooperative computing. The 6th international conference on grid and cooperative computing (GCC2007) Sponsored by China Computer Federation (CCF),Institute of Computing Technology, Chinese Academy of Sciences (ICT) and Xinjiang University ,and in Cooperation with IEEE Computer Soceity ,is to be held from August 16 to 18, 2007 in Urumchi, Xinjiang, China.     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

法律信息库系统

本文分析了法律数据库的结构和特点，介绍了采用面向对象设计方法和超文本数据库技术开发和实现法律信息库系统将作为重要网络资源之一为不同用户进行法律咨询服务。     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

International Journal of Automation and Computing Table of Contents

正~~     

Information for authors

正SCIENCE CHINA Information Sciences(Sci China Inf Sci),cosponsored by the Chinese Academy of Sciences and the National Natural Science Foundation of China,and published by Science China Press,is committed to publishing highquality,original results of both basic and applied research in all areas of information sciences,including computer science and technology;systems science,control science and engineering(published in Issues with odd numbers);information and communication engineering;electronic science and technology(published in Issues with even numbers).Sci China Inf Sci is published monthly in both print and electronic forms.It is indexed by Academic OneFile,Astrophysics Data System(ADS),CSA,Cabells,Current Contents/Engineering,Computing and Technology,DBLP,Digital Mathematics Registry,Earthquake Engineering Abstracts,Engineering Index,Engineered Materials Abstracts,Gale,Google,INSPEC,Journal Citation Reports/Science Edition,Mathematical Reviews,OCLC,ProQuest,SCOPUS,Science Citation Index Expanded,Summon by Serial Solutions,VINITI,Zentralblatt MATH.     

Erratum to: Fast global kernel fuzzy c-means clustering algorithm for consonant/vowel segmentation of speech signal

正Erratum to:J Zhejiang Univ-Sci C(ComputElectron)2014 15(7):551-563doi:10.1631/jzus.C1300320The original version of this article unfortunately contained mistakes.Algorithm 6 should be as follows:Algorithm 6 FGKFCM-F clustering Input:(1)X={x_1,x_2,…,x_N},,x_iR~d,i=1,2,…,N,the dataset;(2)C,1C≤N,the number of clusters;(3)ε0,the stopping criterion;     

Journal of Zhejiang University-SCIENCE C (Computers & Electronics) Total contents

正~~     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.