Toward High-Performance Dihydrophenazine-Based Conjugated Microporous Polymer Cathodes for Dual-Ion Batteries through Donor–Acceptor Structural Design

Recent studies have demonstrated that dihydrophenazine (Pz) with high redox-reversibility and high theoretical capacity is an attractive building block to construct p-type polymer cathodes for dual-ion batteries. However, most reported Pz-based polymer cathodes to date still suffer from low redox activity, slow kinetics, and short cycling life. Herein, a donor–acceptor (D–A) Pz-based conjugated microporous polymer (TzPz) cathode is constructed by integrating the electron-donating Pz unit and the electron-withdrawing 2,4,6-triphenyl-1,3,5-triazine (Tz) unit into a polymer chain. The D–A type structure enhances the polymer conjugation degree and decreases the band gap of TzPz, facilitating electron transportation along the polymer skeletons. Therefore the TzPz cathode for dual-ion battery shows a high reversible capacity of 192 mAh g⁻¹ at 0.2 A g⁻¹ with excellent rate performance (108 mAh g⁻¹ at 30 A g⁻¹), which is much higher than that of its counterpart polymer BzPz produced from 1,3,5-triphenylbenzene (Bz) and Pz (148 and 44 mAh g⁻¹ at 0.2 and 10 A g⁻¹, respectively). More importantly, the TzPz cathode also shows a long and stable cyclability of more than 10 000 cycles. These results demonstrate that the D–A structural design is an efficient strategy for developing high-performance polymer cathodes for dual-ion batteries.     

Lithiophilic MXene-Guided Lithium Metal Nucleation and Growth Behavior

The positive effects of a lithiophilic substrate on the electrochemical performance of lithium metal anodes are confirmed in several reports, while the understanding of lithiophilic substrate-guided lithium metal nucleation and growth behavior is still insufficient. In this study, the effect of a lithiophilic surface on lithium metal nucleation and growth behaviors is investigated using a large-area Ti₃C₂T_x MXene substrate with a large number of oxygen and fluorine dual heteroatoms. The use of the MXene substrate results in a high lithium-ion concentration as well as the formation of uniform solid–electrolyte-interface (SEI) layers on the lithiophilic surface. The solid–solid interface (MXene-SEI layer) significantly affects the surface tension of the deposited lithium metal nuclei as well as the nucleation overpotential, resulting in the formation of uniformly dispersed lithium nanoparticles ( ≈ 10–20 nm in diameter) over the entire MXene surface. The primary lithium nanoparticles preferentially coalesce and agglomerate into larger secondary particles while retaining their primary particle shapes. Subsequently, they form close-packed structures, resulting in a dense metal layer composed of particle-by-particle microstructures. This distinctive lithium metal deposition behavior leads to highly reversible cycling performance with high Columbic efficiencies >  99.0% and long cycle lives of over 1000 cycles.     

Nitrate Additives Coordinated with Crown Ether Stabilize Lithium Metal Anodes in Carbonate Electrolyte

Lithium metal anodes (LMAs) are promising for next-generation batteries but have poor compatibility with the widely used carbonate-based electrolytes, which is a major reason for their severe dendrite growth and low Coulombic efficiency (CE). A nitrate additive to the electrolyte is an effective solution, but its low solubility in carbonates is a problem that can be solved using a crown ether, as reported. A rubidium nitrate additive coordinated with 18-crown-6 crown ether stabilizes the LMA in a carbonate electrolyte. The coordination promotes the dissolution of NO₃⁻ ions and helps form a dense solid electrolyte interface that is Li₃N-rich which guides uniform Li deposition. In addition, the Rb (18-crown-6)⁺ complexes are adsorbed on the dendrite tips, shielding them from Li deposition on the dendrite tips. A high CE of 97.1% is achieved with a capacity of 1 mAh cm⁻² in a half cell, much higher than when using the additive-free electrolyte (92.2%). Such an additive is very compatible with a nickel-rich ternary cathode at a high voltage, and the assembled full battery with a cathode material loading up to 10 mg cm⁻² shows an average CE of 99.8% over 200 cycles, indicating a potential for practical use.     

超疏水涂层的制备及其在金属防腐领域的应用研究进展

由于超疏水材料表面的特殊结构和高疏水性，当其应用在金属表面时，能有效阻止金属基材与腐蚀介质的接触，从而大幅度地提高金属材料的耐腐蚀性能及使用寿命。首先对固体表面浸润理论以及超疏水材料的基础理论进行阐述；然后，介绍了在金属材料表面制备超疏水涂层的常用工艺技术；最后，总结并讨论了超疏水表面涂层在钢、铝和镁等金属材料上的近期发展与应用状况。     

Subdivision based isogeometric analysis for geometric flows

We present a new isogeometric analysis (IGA) approach based on extended Loop subdivision scheme for solving various geometric flows defined on subdivision surfaces. The studied flows include the second-order, fourth-order, and sixth-order geometric flows, such as averaged mean curvature flow, constant mean curvature flow, and minimal mean-curvature-variation flow, which are generally derived by minimizing the associate energy functionals with $L^2$-gradient flow respectively. The geometric flows are discretized by means of subdivision based IGA, where the finite element space is formulated by the limit form of the extended Loop subdivision for different initial control meshes. The basis functions, consisting of quartic box-splines corresponding to each subdivided control mesh, are utilized to represent the geometry exactly. For the cases of the evolution of open surfaces with any shape boundary, high-order continuous boundary conditions derived from the mixed variational forms of the geometric flows should be implemented to be consistent with the isogeometric concept. For time discretization, we adopt an adaptive semi-implicit Euler scheme. By several numerical experiments, we study the convergence behaviors of the proposed approach for solving the geometric flows with high-order boundary conditions. Moreover, the numerical results also show the accuracy and efficiency of the proposed method.     

Nucleation and crystallization of Ba2Si3O8 spherulites in a barium aluminum silicate glass,and mechanical properties of the obtained glass-ceramics

The effect of spherulitic crystallization on the elastic moduli and fracture toughness of a barium aluminum silicate glass was investigated. The crystallization process results in Ba₂Si₃O₈ phase and is initiated from Ba rich nuclei. Nucleation is optimal in the 690-720 °C interval. Young’s modulus is increased by 12.5% when the glass-ceramic conversion is nearly complete. Nevertheless, as the size and the volume fraction of crystals are increased, some microcracking shows up upon cooling from the crystallization temperature. An optimal improvement of the fracture toughness (SEPB method) by 27 % is observed for a 49 % volume fraction of 5 to 10 μm large spherulites.     

基于柠檬酸-铕纳米配位聚合物构建荧光探针快速检测汤煲中5’-肌苷酸含量

基于柠檬酸-铕金属有机纳米配体聚合物（citrate/europium lanthanide coordination polymer nanoparticles，Cit/Eu LCP NPs）构建快速检测肉品汤煲中5’-肌苷酸（inosine-5’-monophosphate，5’-IMP）的荧光探针。研究结果表明，5’-IMP对Cit/Eu?LCP?NPs有良好的荧光猝灭作用。在最佳条件下，该荧光探针在5’-IMP?2.5～200?μg/mL的质量浓度范围内呈现出良好的线性关系，检出限为0.17?μg/mL，且具备良好的抗干扰、稳定性和重复性。为了验证方法可行性，将该方法应用于实际鸡汤样品中的5’-IMP检测，测得加标回收率为97.85%～103.95%，可为快速检测肉品汤煲中5’-IMP提供新的思路和方法。     

深圳抽水蓄能电站引水系统灌浆质量控制与分析

抽水蓄能电站引水系统灌浆质量控制,决定了水道系统渗水量的大小,关系到电站长期运行的经济指标及水道安全。详细介绍了深圳抽水蓄能电站灌浆参数的设计和灌浆中采取的管理措施与技术措施,分析了灌浆检测成果。电站投入运行以来,引水系统结构稳定,无渗漏。通过总结深圳抽水蓄能电站灌浆过程,对水道引水系统灌浆质量控制提出了几点建议,可供类似工程借鉴。     

The effect of charge on the dihydrogen storage capacity of Sc2–C6H6

The effect of charge on the dihydrogen storage capacity of Sc₂–C₆H₆ has been investigated at B3LYP-D3/6-311G(d,p) level. The neutral system Sc₂–C₆H₆ can store 8H₂ with gravimetric density of 8.76 wt %, and one H₂ dissociates and bonds atomically on the scandium atom. The adsorption of 8H₂ on Sc₂–C₆H₆ is energetically favorable below 155 K. The atom-centered density matrix propagation (ADMP) molecular dynamics simulations show that Sc₂–C₆H₆ can adsorb 3H₂ within 1000 fs at 300K. Compared with Sc₂–C₆H₆, the charged systems can adsorb more hydrogen molecules with higher gravimetric density, and all the H₂ are adsorbed in the molecular form. The gravimetric densities of Sc₂–C₆H₆⁺ and Sc₂–C₆H₆²⁺ are 9.75 and 10.71 wt%. Moreover, the maximum adsorption of charged systems are favorable in wider temperature range. Most importantly, the ADMP-MD simulations indicate that Sc₂–C₆H₆²⁺ can adsorb 6 hydrogen molecules within 1000 fs at 300K. It can be found that the gravimetric density (6.72 wt%) of Sc₂–C₆H₆²⁺ still exceeds the target of US Department of Energy (DOE) under ambient conditions.