基于观测器的网络化多智能体预测控制

研究含模型不确定性的刚性航天器输入受限时的姿态跟踪控制设计问题.针对修改的罗德里格斯姿态参数描述的航天器姿态跟踪动力学模型,基于一种有界非线性连续函数和修改的罗德里格斯姿态参数自身有界性,设计鲁棒自适应状态反馈受限控制器,不确定参数的自适应更新律可保证在线估计参数的有界性.通过所提出的输入受限控制设计方法给出输入受限幅值、期望轨迹上界、模型不确定性上界与控制器增益之间的定量关系,并采用李亚普诺夫方法证明通过选择合适的控制器参数可以保证闭环系统角速度误差渐近收敛到零,且姿态跟踪误差收敛到原点小邻域,同时保证控制量始终在预先给定的受限范围内.仿真结果验证了所设计的控制器可在输入受限的情况下完成控制目标并有效抑制模型的不确定性影响.     

一类离散不确定系统的Tube不变集离线鲁棒模型预测控制

针对一类输入和状态受限的离散线性不确定系统,提出了一种基于Tube不变集的离线鲁棒模型预测控制方法.首先针对输入和状态约束线性时不变标准系统,设计了改进的基于多面体不变集的离线模型预测控制算法,并证明了稳定性.其次对于存在未知有界干扰的实际不确定系统,引入了Tube不变集策略,通过设计对应标准模型的最优控制序列和状态轨迹,给出了实际不确定系统的离线Tube不变集控制策略,保证系统状态鲁棒渐近稳定,并收敛于终端干扰不变集.仿真结果验证了该控制方法的有效性.     

基于容许集的变终端约束MPC控制

针对一类输入和状态受约束的离散线性系统,提出一种基于Ⅳ步容许集的变终端约束集模型预测控制方法.首先给出多面体不变集序列作为终端约束集的离线模型预测控制算法,扩大了终端约束集.为进一步扩大初始状态可镇定区域,引入N步容许集,设计了基于容许集的变终端约束集模型预测控制方法.该算法采用离线设计、在线优化方法,实现了系统渐近稳定,不仅降低了在线运算量,而且扩大了初始状态可镇定区域.仿真结果表明了算法的有效性.     

挠性卫星姿态跟踪自适应L2增益控制

针对在轨挠性卫星姿态跟踪时存在参数不确定、外部干扰以及控制输入受限等问题,提出了一种自适应L2增益控制方法.首先利用神经网络来逼近系统中的未知非线性动态特性,设计自适应控制律来处理系统中的不确定参数:其次设计了一鲁棒控制器使得干扰力矩对系统性能输出具有L2增益,从而实现对干扰的抑制控制.最后通过引入附加的输入误差系统,...     

应用于力矩受限自由漂浮空间机器人的神经网络自适应控制

在控制力矩受限情况下,为实现具有模型不确定性自由漂浮空间机器人的轨迹跟踪控制,文章设计了一种新的神经网络自适应控制策略;首先,用双曲函数对控制力矩输入进行限制;其次,设计一种神经网络自适应控制律,对输入力矩受限条件下的非线性系统模型进行在线逼近,同时,利用鲁棒项对神经网络逼近误差和外界干扰进行消除;最后,根据李雅普诺夫理论,证明了所设计控制策略能够使自由漂浮空间机器人系统渐进稳定;仿真实验表明,该控制策略在无需建立复杂系统模型的情况下,便能够对控制力矩进行有效限制,从而使自由漂浮空间机器人在控制力矩受限情况下得到较好的控制.     

一类状态/输入受限的不确定非仿射非线性系统 鲁棒自适应backstepping控制

针对一类状态/输入受限的不确定严格反馈非仿射非线性系统跟踪控制问题,提出一种鲁棒自适应backstepping控制策略.在保证系统精度的前提下,对状态/输入受限的非仿射系统进行Taylor级数在线展开,得到其仿射形式;为保证系统复合扰动在线准确逼近,提出基于投影算子的递归扰动模糊神经网络干扰观测器(RPFNNDO);在考虑不确定系统存在状态受限和输入饱和等因素下,结合障碍Lyapunov函数、tanh函数及Nussbaum函数,利用backstepping方法设计控制器,并采用Lyapunov稳定理论分析闭环系统稳定性.应用于无人机航迹控制的仿真结果验证了所提方法的有效性.     

一种离-在线混合数据驱动控制方法及其在直流电动机中的应用

针对离线和在线数据驱动控制方法各自存在的不足,提出一种离-在线混合数据驱动控制方法。首先给出一种基于最小二乘支持向量机和虚拟目标值反馈整定的离线数据驱动控制方法;其次在二自由度控制系统框架下,结合无模型自适应控制,给出一种离-在线混合数据驱动控制方法的结构和设计步骤。该方法跳过被控对象建模过程,大大降低了控制器设计成本,且可避免引入模型误差。将该方法应用于直流电动机离-在线数据驱动控制中,并进行了仿真实验,结果表明,离-在线混合数据驱动控制方法可以有效地实现目标信号跟踪和电动机系统的不确定(外部扰动)抑制。     

基于容许集的多胞不确定系统三模RMPC

针对输入和状态受约束的多胞不确定线性系统,提出了基于容许集的扩大吸引域三模鲁棒模型预测控制方法.在多面体不变集离线模型预测控制算法的基础上引入容许集,以多面体不变集序列的并集作为模态1,基于N步容许集的控制容许集作为模态2,并利用离线设计和在线优化的控制策略,设计了三模变终端约束鲁棒模型预测控制算法,以实现系统渐近稳定.该算法不仅降低了在线运算量,而且扩大了吸引域.最后的仿真结果验证了所提出算法的有效性.     

双足机器人跨越动态障碍物在线控制系统设计

在双足机器人跨越动态障碍物的在线控制问题中,脚步规划和步态控制的学习时间是关键问题;提出了一种将机器人的步态控制和脚步规划分别独立设计的控制策略;步态控制目的是产生关节点轨迹并控制对理想轨迹的跟踪,考虑到双足机器人关节点轨迹的不连续性,应用小脑模型连接控制CMAC记忆特征步态的关节点轨迹;脚步规划的控制目标是通过对环境的视觉感知预测机器人的运动路径,算法是基于无需对动态环境精确建模的模糊Q学习算法;仿真结果表明该控制策略的可行性,并且可以有效缩短在线学习时间。     

一类输入受限的不确定非仿射非线性系统二阶动态terminal 滑模控制

针对一类输入受限的不确定非仿射非线性系统跟踪控制问题, 提出一种二阶动态terminal 滑模控制策略. 在不损失模型精度, 并考虑系统输入饱和受限的前提下, 给出一种适用于全局的不确定非仿射非线性系统近似方法. 提出小波小脑模型干扰观测器设计方法, 实现复合扰动的有效逼近. 构造辅助系统分析输入饱和对跟踪误差的影响. 通过构造基于PI 滑模面的terminal 二阶滑模面, 给出二阶动态terminal 滑模控制器设计过程, 克服了传统滑模的抖振问题. 仿真结果验证了所提出方法的有效性.

     

Stochastic Iterative Learning Control With Faded Signals

Stochastic iterative learning control (ILC) is designed for solving the tracking problem of stochastic linear systems through fading channels. Consequently, the signals used in learning control algorithms are faded in the sense that a random variable is multiplied by the original signal. To achieve the tracking objective, a two-dimensional Kalman filtering method is used in this study to derive a learning gain matrix varying along both time and iteration axes. The learning gain matrix minimizes the trace of input error covariance. The asymptotic convergence of the generated input sequence to the desired input value is strictly proved in the mean-square sense. Both output and input fading are accounted for separately in turn, followed by a general formulation that both input and output fading coexists. Illustrative examples are provided to verify the effectiveness of the proposed schemes.      

Robotic Knee Tracking Control to Mimic the Intact Human Knee Profile Based on Actor-Critic Reinforcement Learning

We address a state-of-the-art reinforcement learning (RL) control approach to automatically configure robotic prosthesis impedance parameters to enable end-to-end, continuous locomotion intended for transfemoral amputee subjects. Specifically, our actor-critic based RL provides tracking control of a robotic knee prosthesis to mimic the intact knee profile. This is a significant advance from our previous RL based automatic tuning of prosthesis control parameters which have centered on regulation control with a designer prescribed robotic knee profile as the target. In addition to presenting the tracking control algorithm based on direct heuristic dynamic programming (dHDP), we provide a control performance guarantee including the case of constrained inputs. We show that our proposed tracking control possesses several important properties, such as weight convergence of the learning networks, Bellman (sub) optimality of the cost-to-go value function and control input, and practical stability of the human-robot system. We further provide a systematic simulation of the proposed tracking control using a realistic human-robot system simulator, the OpenSim, to emulate how the dHDP enables level ground walking, walking on different terrains and at different paces. These results show that our proposed dHDP based tracking control is not only theoretically suitable, but also practically useful.      

Composite active disturbance rejection robust control for a prototype of an active damping artificial ankle prosthesis

The problem of robust control applied to adjust the configuration of an ankle prosthesis based on disturbance estimation has been addressed in this study. Active disturbance rejection control was the paradigm used for controlling the robotic prosthesis by means of a direct active estimation. Based on this active estimation, the robust controller implemented the disturbance cancellation providing a fast converge to the origin of the tracking error. The uncertainties affecting the prosthesis dynamics were identified by a high‐order extended state high gain observer. This identification was used to force the tracking between the actual position and force needed in the ankle prosthesis and some reference values obtained by a biomechanical gait cycle analysis. Therefore, the estimated states were used to implement a robust output feedback controller that was effective to reject actively the perturbations. This rejection implemented within the controller forced the trajectory tracking to a small vicinity of the origin. A strategy based on composite Lyapunov function served to prove that tracking problem for the prosthesis was successfully solved despite the switching nature of the gait cycle. The controller was implemented in numerical simulations for showing the convergence of the tracking error. The convergence of this tracking error to the region around the origin was obtained within the first second of simulation.     

A Combined Adaptive Law for Fuzzy Iterative Learning Control of Nonlinear Systems With Varying Control Tasks

To deal with the iterative control of uncertain nonlinear systems with varying control tasks, nonzero initial resetting state errors, and nonrepeatable mismatched input disturbance, a new adaptive fuzzy iterative learning controller is proposed in this paper. The main structure of this learning controller is constructed by a fuzzy learning component and a robust learning component. For the fuzzy learning component, a fuzzy system used as an approximator is designed to compensate for the plant nonlinearity. For the robust learning component, a sliding-mode-like strategy is applied to overcome the nonlinear input gain, input disturbance, and fuzzy approximation error. Both designs are based on a time-varying boundary layer which is introduced not only to solve the problem of initial state errors but also to eliminate the possible undesirable chattering behavior. A new adaptive law combining time- and iteration-domain adaptation is derived to search for suitable values of control parameters and then guarantee the closed-loop stability and error convergence. This adaptive algorithm is designed without using projection or deadzone mechanism. With a suitable choice of the weighting gain, the memory size for the storage of parameter profiles can be greatly reduced. It is shown that all the adjustable parameters as well as internal signals remain bounded for all iterations. Moreover, the norm of tracking state error vector will asymptotically converge to a tunable residual set even when the desired tracking trajectory is varying between successive iterations.     

Optimal selection of the forgetting matrix into an iterative learning control algorithm

A recursive optimal algorithm, based on minimizing the input error covariance matrix, is derived to generate the optimal forgetting matrix and the learning gain matrix of a P-type iterative learning control (ILC) for linear discrete-time varying systems with arbitrary relative degree. This note shows that a forgetting matrix is neither needed for boundedness of trajectories nor for output tracking. In particular, it is shown that, in the presence of random disturbances, the optimal forgetting matrix is zero for all learning iterations. In addition, the resultant optimal learning gain guarantees boundedness of trajectories as well as uniform output tracking in presence of measurement noise for arbitrary relative degree.     

A Learning Control for a Class of Linear Time Varying Systems Using Double Differential of Error

In this paper, a new iterative learning control based on the double differential of the error is proposed for the linear time varying system having relative degree greater than one. The convergence criterion of the proposed method is proved. Furthermore, it is shown by simulations that convergence of error can be increased considerably by using our proposed controller as compared to the iterative learning controller using error or single differential of the error for the modification of the control input without increasing the learning gain.     

基于宽度学习系统的气动波纹管驱动器无模型跟踪控制

针对一款具有波纹管外形的充气伸长型气动软体驱动器(简称“气动波纹管驱动器”),提出一种基于宽度学习系统的无模型跟踪控制方法,使该驱动器有效跟踪期望轨迹.首先,介绍气动波纹管驱动器结构,以及气动波纹管驱动器整体实验平台工作原理.根据驱动器实时位置信息提出一种基于宽度学习系统的跟踪控制方法,受PID跟踪控制方法中积分项作用的启发,所提出控制方法不仅采用系统跟踪误差作为宽度学习系统的输入之一,还将跟踪误差对时间的积分项作为另一输入以消除期望轨迹与实际轨迹间的恒定偏差.然后,采用宽度学习系统计算得到控制气压,同时,利用基于梯度下降法的学习律在线调整宽度学习系统权值,进而减小驱动器跟踪误差.最后,通过实验验证所提出方法的有效性.所提出方法无需建立驱动器模型,能够简化控制器设计步骤,且与深度神经网络控制方法相比,能在避免计算量过大的前提下实现较高的跟踪控制精度.     

An online reference governor for mobile robot to reduce the occurrence of control input saturation

This study proposed an online reference governor for a mobile robot to reduce the occurrence of control input saturation. For following the trajectory by a mobile robot, it is one of the practical subjects to provide appropriate control reference even if any disturbances occur. We proposed a methodology to regulate the control reference iteratively based on time-scaling approach. The time-scaling approach is a method to realize to regulate time development characteristic on the given trajectory. It is difficult to model the effect of the interaction with the road surface and the trajectory tracking error is appeared as the amount of accumulated such factors. Therefore, it is a practical approach to reduce the occurrence of control input saturation based on the evaluation of the trajectory tracking error. Proposed reference governor realizes online time scaling based on the trajectory tracking error index and a smooth transition dynamics. By introducing the proposed method, the occurrence of control input saturation can be reduced in case of that the disturbances occur. For verification of our proposed method, computer simulations utilizing a stable velocity controller were conducted and the results were discussed.     

随机变批次长度的反馈辅助PD型量化迭代学习控制

针对离散线性系统,研究批次长度随机变化的反馈辅助PD型量化迭代学习控制问题.考虑系统信号经量化后传输到控制器或执行器的情况,给出两种量化方案:跟踪误差信号量化和控制输入信号量化.基于两种不同的量化信号,在批次长度和初始条件随机变化前提下设计反馈辅助PD型迭代学习控制算法.采用扇形界的处理方法和堆积系统框架,推导数学期望下的学习收敛条件:在误差信号量化情况下,所提出控制算法可以保证跟踪误差渐近收敛到零;在控制输入信号量化情况下,所提出控制算法能够保证跟踪误差有界收敛.仿真示例对比验证了两种量化方案下所提出方法的有效性和优越性.     

Conditional learning control for alignment initial condition

This article tries to handle the alignment initial condition for contraction mapping based iterative learning control, such that the system can operate continuously without any initial condition reset. This goal is achieved for a class of nonlinear systems through the proposed conditional learning control, which has several advantages over the alternative method, adaptive learning control. The conditional learning control guarantees that sufficient knowledge can be learned to update the input and achieve perfect output tracking, despite the non-identical initial conditions. The sufficient conditions of either monotonic or strictly monotonic convergence of the input sequence, and the choice of learning gains are given. The performance of the proposed method is illustrated by simulated examples.