A GESO based MPC approach to contour error control of networked motion control system

This paper presents a generalised extended state observer (GESO) based model predictive control (MPC) approach to contour error control for networked multi-axis motion system (NMAMS) with network-induced delays. First, the uncertainties induced by the network-induced delays are modelled as an additive bounded disturbance, and a novel model predictive controller based on the GESO is designed for the uniaxial trajectory tracking control system. The GESO is used to estimate the system state and the disturbance simultaneously, and the effects of the uncertainties induced by the delays are eliminated by the proposed GESO based controller. Then the contour error estimation method is adopted, and a PID controller is designed to compensate the contour error. Finally, experiments are carried out to demonstrate the effectiveness of the proposed method.     

基于参考模型的扰动观测器控制系统

为了补偿控制系统的未知动态和外部扰动,论文提出一种基于参考模型的扰动观测器控制系统.首先,分析了二阶理想参考模型控制系统的设计,并通过闭环传递函数证明了参考模型控制系统的稳定性.然后,设计了二阶系统扰动观测器和基于参考模型的扰动观测器控制律,分析了二阶闭环控制误差系统收敛性.并推广到n阶控制系统,证明了n阶闭环控制误差系统稳定性.最后,仿真实验结果表明,与线性自抗扰控制(LADRC)系统相比,基于参考模型的扰动观测器控制系统阶跃响应的跟踪精度和抗扰性能明显优于LADRC系统,扰动的估计精度高,控制输入量小于LADRC系统;基于参考模型的扰动观测器控制系统正弦跟踪精度和扰动的估计精度也高于LADRC系统.该新型控制系统结构简单,抗扰性能好,控制效率高,具有重要的工程应用价值.     

Robust Repetitive Control and Disturbance Rejection Based on Two‐Dimensional Model and Equivalent‐Input‐Disturbance Approach

A new configuration of a modified repetitive‐control system has been devised for a class of strictly proper plants that suppresses exogenous disturbances and uncertainties in the dynamics of the plant. It extends the applicability of the control system. The system consists of four parts: a two‐dimensional augmented model of the plant, which takes into account the difference in characteristics between continuous control and discrete learning in repetitive control; an equivalent‐input‐disturbance estimator; a state observer; and a state‐feedback controller. A robust‐stability condition expressed in terms of a linear matrix equality is used to determine the gains of the observer and the controller. Finally, a comparison of our method with repetitive control based on linear active disturbance rejection control (LADRC) shows how effective our method is and that it is superior to LADRC‐based repetitive control.     

一类轻载电液位置伺服系统线性自抗扰控制

为解决一类轻载电液位置伺服系统线性自抗扰控制器设计过程中面临的阶次选择问题,本文从系统特性、频域等角度,分析自抗扰框架中“积分器串联结构”与轻载电液位置伺服系统之间的内在联系,得到轻载电液位置伺服系统在自抗扰控制框架下是本质“一阶”系统的结论,从而合理设计了1阶线性自抗扰控制器.在此基础上,提出了有效的控制器参数整定方法,并分析了闭环系统的稳定性.仿真和试验结果表明,与高阶相比1阶线性自抗扰控制器可以更好地控制动态过程较快、负载较轻的惯性负载电液位置伺服系统,为自抗扰控制在液压伺服领域的工程应用提供了参考.     

电液比例位置同步线性自抗扰控制

电液比例位置同步液压系统受到元件安装精度、死区非线性以及系统参数摄动等因素的影响,导致两侧子系统性能不一致进而引起位置不同步.针对这一问题,提出由位置控制器、死区补偿器、同步控制器组成的复合控制方案.首先,建立电液比例位置控制系统数学模型,并分析系统内部参数摄动及比例阀死区特性对同步控制精度造成的影响.在此基础上,设计线性自抗扰同步控制器,实现对系统内外扰动的实时估计与主动补偿,同时为提高液压缸动态性能,减小稳态误差,设计了比例阀死区补偿器.仿真和实验结果表明,自抗扰控制器有效地抑制了内外扰动,提高了位置同步控制精度,而死区补偿器的引入改善了系统动态响应性能,降低了稳态位置同步误差.     

线性自抗扰控制的抗饱和补偿措施

控制输入约束是实际工业过程中普遍存在的现象,然而控制器设计中通常都假设执行机构动态是线性的,因此当执行机构存在约束时,执行机构输出信号与控制器输出信号不一致,使系统的动态性能降低,甚至导致系统不稳定.本文针对线性自抗扰控制(linearactive disturbance rejection control,LADRC)执行机构的约束问题,提出两种抗饱和补偿方案,利用LADRC扩张状态观测器估计控制器状态或者控制器输出与执行器输出的误差,从而使LADRC能快速消除饱和.将这两种方法用到含执行机构饱和的一阶惯性加迟延被控对象进行仿真研究,结果表明两种补偿措施下线性自抗扰控制器能得到较好的控制性能.随后本文将LADRC抗饱和思想推广到负荷频率控制系统(load frequency control,LFC)中,仿真表明基于误差补偿的抗饱和方案对于LFC系统更为有效.     

线性自抗扰控制的适用性及整定

线性自抗扰控制将被控对象看成串级积分系统,把其他信息都当成不确定性.这种处理方法简单,但是对什么样的系统有效,目前还没有理论给出确定的答案.本文证明任何带有积分行为的严格正则传递函数都可以由线性自抗扰控制的反馈控制器等价实现,从而表明线性自抗扰控制具有广泛的适用性,即只要其他线性控制方法能够控制的系统,线性自抗扰控制同样可以适用.为简化线性自抗扰控制器参数整定,本文针对工业过程中广泛存在的PID控制器,提出将PID参数转化为二阶自抗扰控制参数的方法.该方法转化的线性自抗扰参数以带宽形式表示,从而保留了传统线性自抗扰简单易调的特性,为线性自抗扰控制在工业过程的应用准备了基础.     

基于VSG微网储能变流器无缝切换控制策略研究

针对微网储能变流器采用状态跟随控制器进行切换的过程中存在微小电压、电流扰动等问题,本文提出了一种基于线性自抗扰控制器(LADRC)的无缝切换控制策略。在采用P/Q控制和VSG控制相互切换方法的基础上,将电流内环控制器改成线性自抗扰控制器。通过设计一个状态观测器LESO实时在线观测估计输出变量直轴、交轴电流id、iq以及系统的各种扰动;将扰动估计值补偿给P/Q控制器和VSG控制器切换过程中的突变量,从而抑制切换过程中的电压、电流波动。最后,建立基于LADRC的储能变流器无缝切换仿真模型。仿真结果验证了该方法的可行性。     

线性自抗扰控制器的稳定性研究

研究了线性扩张状态观测器(Extended state observer, ESO)的估计能力,并且分析了在线性自抗扰控制(Linear active disturbance rejection control, LADRC)下闭环系统的稳定性. 对于系统模型未知的情形, 给出了线性扩张观测器估计误差有界的证明, 并通过分析得出了如下结论: 在扩张状态观测器跟踪误差趋于零的前提下, 在线性自抗扰控制下的闭环系统可以实现对设定信号的精确跟踪以及输入-输出有界(Bounded input and bounded output, BIBO)稳定.     

Anti‐windup design of active disturbance rejection control for sampled systems with input delay

A novel anti‐windup design of active disturbance rejection control (ADRC) is proposed for industrial sampled systems with input delay and saturation. By using a generalized predictor to estimate the delay‐free system output, a modified extended state observer is designed to simultaneously estimate the system state and disturbance, which could become an anti‐windup compensator when the input saturation occurs. Accordingly, a feedback controller is analytically designed for disturbance rejection. By proposing the desired closed‐loop transfer function for the set‐point tracking, a prefilter is designed to tune the tracking performance while guaranteeing no steady‐state output tracking error. A sufficient condition for the closed‐loop system stability is established with proof for practical application subject to the input delay variation. Illustrative examples from the literature are used to demonstrate the effectiveness and merit of the proposed control design.