Substrate integrated waveguide based cavity‐backed self‐triplexing slot antenna for X‐Ku band applications

A planar substrate integrated waveguide (SIW) based cavity‐backed self‐triplexing slot antenna is proposed for X‐Ku band applications. The antenna comprises of the SIW cavity, radiating slots, and feeding networks. The radiating slots; that are etched on the upper metallic plane of the SIW, are backed up by the three radiated quarter cavities (QCs). The radiating slots in the respective QCs are of different lengths, excited by three separated orthogonal feed lines to resonate at three different frequencies as 11.01, 12.15, and 13.1 GHz. By fine‐tuning the antenna parameters, an intrinsic input port isolation of better than 26 dB is realized which helps in achieving the self‐triplexing property. The behaviors of individual cavity modes at three resonant frequencies are explained with the help of Z‐parameter. The proposed antenna layout is easy to integrate with the planar circuit. The proposed antenna is fabricated and measured results display a close concern with the simulated results. Moreover, a unidirectional radiation pattern and gain of 5.1, 5.54, and 6.12 dBi at resonant frequencies are realized.     

A novel substrate integrated waveguide cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic

This article presented a substrate integrated waveguide (SIW) cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic. The proposed array consists of 16 SIW cavity‐backed slot antennas. The SIW cavity‐backed slot antenna can be fed by two separate ports to resonate at two different frequencies and achieve high isolation better than 20 dB between two input ports. The proposed element is a typical self‐diplexing antenna. These cavity‐backed slot antennas are shunt‐fed by a compact 1 to 16 SIW power divider and series‐fed by a set of microstrip lines, respectively. As a result, this array achieves an unidirectional radiation pattern at 10.2 GHz with high gain of 15.10 dBi, and a frequency beam scanning characteristic from 7.0 to 9.0 GHz ranging from ?50° to 46°.     

Design of a compact orthogonal fed self‐diplexing bowtie‐ring slot antenna based on substrate integrated waveguide

In this article, a novel design of compact cavity‐backed slot antenna based on substrate integrated waveguide (SIW) technology is presented for dual‐frequency communication services. A single layer printed circuit board is applied to implement the proposed antenna. The bowtie‐ring slot engraved on the SIW square cavity is excited using two orthogonal microstrip feed lines to operate at two distinct frequencies (6.62 GHz and 11.18 GHz). The proposed antenna allows each of these frequencies to be designed independently. A prototype of the proposed cavity‐backed antenna that radiates at both 6.62 GHz and 11.18 GHz is fabricated and measured. The port isolation better than 29.3 dB is achieved by utilizing the transmission zeros (TZs), which are produced due to the orthogonal feed lines, TE₁₁₀ mode and coupling between the TE₁₂₀ and TE₂₁₀ modes. The measured peak gains of the proposed diplexing antenna are 5.77 dBi and 5.81 dBi at lower and upper resonating frequencies, respectively. The proposed dual‐frequency antenna exhibits the front‐to‐back‐ratio (FTBR) and cross‐polarization level greater than 26 dB and 21 dB, respectively, at both resonating frequencies.     

Compact tri‐band MIMO antenna based on quarter‐mode slotted substrate‐integrated‐waveguide cavity

A compact tri‐band multiple‐input‐multiple‐output (MIMO) antenna based on a quarter‐mode slotted substrate‐integrated‐waveguide (SIW) cavity is proposed. By etching a wide slot, a single SIW cavity is divided into two sub‐cavities with the same size. They are fed by coaxial ports to form two MIMO elements and high antenna isolation can be achieved by this slot. To obtain multi‐band operations, two narrow slots are cut in the upper sub‐cavity and the other two slots are etched in the lower sub‐cavity. Three eighth‐mode resonances with different areas can simultaneously occur in these antenna elements. A prototype with the overall size of 0.34λ₀ × 0.34λ₀ has been fabricated. The measured center frequencies of three operating bands are 2.31, 2.91, and 3.35 GHz, respectively. The measured gain at above frequencies is 4.52, 4.29, and 4.57 dBi, respectively. Moreover, the measured isolation is higher than 16.7 dB within the frequency of interest.     

Compact four‐element MIMO SIW cavity backed slot antenna with high front‐to‐back ratio

In this article, a novel design of single layer, compact, multiple input multiple output (MIMO) half‐mode substrate integrated waveguide (HMSIW) cavity backed quad element slot antenna with high front‐to‐back ratio (FTBR) is proposed. The proposed antenna consists of four rectangular SIW cavities with semi‐taper radiating slots. The antenna elements are placed in a fashion to achieve high isolation. This antenna is designed for WLAN vehicular communication system to cover the frequency range of 5.84 GHz to 5.96 GHz. It has high front to back ratio (FTBR) of more than 25 dB without using any external metallic reflector. It has more than 37 dB isolation in between orthogonal elements and more than 24 dB in between parallel elements. The envelop correlation coefficient (ECC) and diversity gain are 0.003 and 9.99 dB respectively in between all the elements. Moreover, the antenna has high gain and efficiency of more than 8 dB and 94%, respectively, in 10 dB impedance bandwidth. It can be tuned in a wide range of frequency.     

Substrate integrated waveguide dual‐frequency dual‐sense circularly polarized cavity‐backed slot antenna

A novel design of dual‐frequency dual‐sense circularly polarized (CP) substrate integrated waveguide (SIW) cavity‐backed slot antenna is presented for dual‐band wireless communication systems. The proposed antenna consists of square SIW cavity, asymmetrical bow‐tie‐shaped cross slot and probe feed. Due to use of asymmetrical bow‐tie‐shaped cross slot, circularly polarized wave radiates at two different frequencies with opposite sense of polarizations. The RHCP radiation occurs at (10.45‐10.54) GHz (Lower band) and LHCP occurs at (11.26‐11.34) GHz (Upper band). Moreover, in each band, sense of polarization can be change by changing the feed position. The front to back radiation ratio (FTBRR) is more than 10.5 dB and cross polarization level is lower than ?20 dB in both the bands.     

Planar integrated substrate integrated waveguide circularly polarized filtering antenna

A new design of substrate integrated waveguide (SIW) circularly‐polarized (CP) filtering antenna is presented, which is based on dual‐mode (TE₁₀₂ and TE₂₀₁) cavities. The satisfying filtering performance of the antenna is realized by a coupled‐resonator circuit of two dual‐mode SIW cavities. And the radiating element of the antenna is a cavity‐backed CP slot antenna which is formed by a nonuniform ring slot integrated with the back cavity. To demonstrate the idea, a prototype antenna operating at X band is designed, fabricated, and measured. Measured results show that the 10‐dB impedance bandwidth is 4.2% (from 11.6 to 12.1 GHz), the 3‐dB axial‐ratio (AR) bandwidth is 4%, and the gain is 5.6 dBi at the center frequency of 11.8 GHz.     

High gain substrate integrated waveguide beam scanning antenna with sub‐array elements

A method to enhance the gain of substrate integrated waveguide (SIW) beam scanning antenna is proposed in this article. 2 × 2 SIW cavity‐backed sub‐arrays are employed in array design. The antenna is constructed on two layers. The top layer places four SIW cavity‐backed sub‐arrays as radiating elements and the bottom layer is an SIW transmission line to feed the sub‐arrays. Beam scanning feature can be obtained due to the frequency dispersion. Moreover, through separating radiators to the other layer and using 2 × 2 SIW cavity‐backed sub‐arrays as radiating parts, the antenna gain is improved significantly. For a linear array, 4.1 to 6.8 dB gain enhancement is achieved compared to a conventional SIW beam scanning antenna with the same length. Then, the linear array is expanded to form a planar array for further gain improvement. A 64‐element planar beam scanning array is designed, fabricated, and tested. Experimental results show that the proposed planar array has a bandwidth from 18.5 GHz to 21. 5 GHz with beam scanning angle from ?5° to 11.5° and gain in the range of 20.5 to 21.8 dBi. The proposed high gain beam scanning antennas have potential applications in radar detection and imaging.     

Dual‐functional QM SIW cavity integrating two‐element MIMO antenna and second‐order bandpass filter

A quarter‐mode (QM) substrate‐integrated‐waveguide (SIW) cavity is designed as a dual‐functional component. By etching three slots, four sub‐cavities are formed and then two of them with the same size are individually fed by a coaxial port. Three resonating frequencies are excited in the single QM SIW cavity. One of them can radiate cavity energy input by these ports into free space, implying a two‐element multiple‐input‐multiple‐output (MIMO) antenna, whereas the other two can transmit energy from one port to the other port, indicating a second‐order bandpass filter. Moreover, antenna isolation and filter bandwidth can be adjusted to a certain degree. A prototype with the overall size of 0.40λ₀ × 0.40λ₀ × 0.02λ₀ has been fabricated. The integrated bandpass filter demonstrates the measured center frequency of 3.8 GHz and operating bandwidth of 32 MHz while the integrated MIMO antenna exhibits the frequency of 3.4 GHz, bandwidth of 67 MHz, port isolation of 18.0 dB, radiation gain of 4.0 dBi, and envelope correlation coefficient of 0.25.     

Eighth‐mode SIW based compact high gain leaky‐wave antenna

In this article, a novel electrically small eighth‐mode substrate integrated waveguide (EMSIW) based leaky‐wave antenna (LWA) in planar environment is presented. The proposed antenna uses 1/8th mode SIW resonator which helps to improve compactness of the design while maintaining high gain and increased scanning angle. The proposed SIW cavity is excited by a 50 Ω microstrip line feeding to resonate at dominant TE₁₁₀ mode in X‐band. The dimensions of the resonators are adjusted to keep resonant mode at same frequency. The fabricated prototype is approximately 5λ₀ long. Measured results show that the proposed leaky‐wave antenna is able to operate within frequency range of 8‐10 GHz with beam scanning range of 51° and maximum gain of 13.31 dBi.     

A dual‐band dual‐mode microstrip Yagi antenna with quasi‐end‐fire radiation

A dual‐band dual‐mode microstrip Yagi antenna with quasi‐end‐fire radiation patterns is proposed in this paper. It consists of five radiating patches driven by a single slot‐loaded patch placed in the middle. Meanwhile, two slot‐loaded parasitic patches are symmetrically located on two sides of the driven patch, respectively. In the lower band, the five patches involved resonate at TM₀₁ mode. While in the upper band, all the patches resonate at TM₀₂ mode. In order to ensure quasi‐end‐fire radiations in the both bands, four slots are symmetrically etched around the strongest surface currents of each patch resonating at TM₀₂ mode. As a result, the resonant frequency of TM₀₂ mode is decreased dramatically, while the resonant frequency of TM₀₁ mode almost remains unchanged. With these arrangements, the separations between any two of the adjacent patches at their centers satisfy the requirements in design of the microstrip Yagi antenna in both bands, so as to realize the dual‐band dual‐mode microstrip Yagi antenna on a single‐layer substrate. Finally, an antenna prototype is fabricated and tested. The measured results reveal that the dual operating bands of 2.76~2.88 and 4.88~5.03 GHz for |S₁₁| < ?10 dB are satisfactorily achieved. Most importantly, the proposed antenna can indeed realize the quasi‐end‐fire radiation patterns in dual operating bands.     

An SIW filtering antenna array with quasi‐elliptic gain response based on intercavity bypass coupling

In this article, a filtering antenna array based on substrate integrated waveguide (SIW) is proposed with quasi‐elliptic gain responses for the first time. Two radiation nulls in the gain responses at two sides of the frequency band edges are designed by applying a novel intercavity bypass coupling scheme. First, by carefully analyzing the bypass coupling between the in‐band and out‐of‐band modes in a single oversized TE₁₀₃ mode cavity resonator, quasi‐elliptic filtering responses are achieved for a two‐output filter. Afterward, those cavity resonators coupled with the two outputs are replaced by cavity‐backed slot antennas to achieve the proposed filtering cavity‐backed slot antenna array. Only one cavity is required in our design to achieve the two transmission zeros and the function of power divider. As a result, the complexity of the proposed filtering antenna array is reduced. A prototype operating at Ka band is designed, fabricated and measured with a center frequency of 28.5 GHz and fractional bandwidth of 1.25%. Similar characteristics can be observed between the gain response of the proposed filtering antenna and the transmission responses of the two‐output filter. The proposed SIW filtering antenna array has great potential to be integrated into millimeter‐wave transceiver modules. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:191–198, 2016.     

A compact substrate integrated waveguide backed self‐quadruplexing antenna for C‐band communication

This article presents a simple, compact, and lightweight substrate integrated waveguide (SIW) backed self‐quadruplexing antenna for quad‐band applications. The design procedure is straightforward. Topside of the SIW cavity is modified to form four patches of different lengths which are fed separately by four 50‐Ω microstrip feed lines and operate at 5.14, 5.78, 6.74, and 7.74. It attains 4.1, 4.96, 6.2, and 6.1 peak gain at the above frequencies, respectively. The observed front‐to‐back‐ratio is more than 17.5 dB and the isolation level is above 28 dB. This antenna topology allows to redesign each resonant frequencies as per application requirement using a single parameter and without disturbing other performances. Design guidelines for developing the proposed antenna are provided. A prototype antenna is fabricated using RT‐Duroid (5870) substrate and characterized for validation. The proposed antenna is suitable for handheld microwave devices for C‐band communication.     

Computer aided equivalent circuit model of SIW cavity backed triple band slot antenna

In this article, a study of planar triple band unidirectional Substrate Integrated Waveguide (SIW) cavity backed slot antenna using equivalent circuit model is presented. The proposed antenna uses a modified dumbbell shaped slot of much larger length placed in a planar SIW cavity to excite three closely spaced SIW cavity hybrid modes which help the slot to radiate into free space. The design is analyzed with the help of equivalent circuit model to predict the resonant frequencies of the design and also to explain the excitation mechanism of the proposed slot antenna. The proposed circuit model is validated by comparing its performance with the simulation model for a wide range of parametric variation. The relationship between modification in design dimension with the variation of coupling between feed line and cavity modes is studied which gives a design guideline for the proposed antenna. The fabricated prototype of the antenna resonates at 7.39, 9.43, and 14.79 GHz with a gain of 3.2, 4.9, 4.7 dBi and front‐to‐back ratio (FTBR) of 10 dB, respectively, at three resonant frequencies which makes it suitable for C (4–8 GHz), X (8–12 GHz), and Ku (12–18 GHz) band applications.     

Compact high gain half‐mode substrate integrated waveguide cavity antenna using hybrid mode

In this article, a compact fully planar high gain antenna based on half‐mode substrate integrated waveguide (HMSIW) cavity is presented. The design uses a novel configuration of HMSIW cavity with high length to width ratio along with tapered open edge and a pair of slot stub. The high length to width ratio of the cavity helps to excite closely spaced multiple TE^y_m10 cavity modes within comparatively smaller footprint due to use of the HMSIW cavity. These modes combine to give hybrid mode resonance in the cavity which helps to generate a narrow beam high gain radiation pattern of the antenna. The size of the proposed antenna is further reduced and a pair of slot stub is put along the sidewall of the cavity which helps to sustain similar hybrid mode field distribution within much smaller dimension. A size reduction of 76.7% is achieved in the proposed design configuration without degrading much of the gain performance. The proposed antenna resonates at 9.8 GHz with a gain of 7.9 dBi which is much higher than other reported HMSIW cavity antenna. The proposed antenna may find application in point to point communication, short range radar in X band.     

Compact three‐antenna MIMO system based on triangular half‐mode substrate‐integrated‐waveguide cavity

A compact three‐antenna MIMO system based on a triangular half‐mode SIW cavity is proposed. Two isosceles‐right cavity edges are shorted by metallic vias while a hypotenuse is opened to radiate cavity energy into the air. By etching two T‐shaped slots and adopting coaxial feedings, three antennas are formed. The same operating frequencies are achieved by adjusting the position of these slots and high isolation is obtained by optimizing their length. The proposed design has attractive features of simple configuration and compact size, which is completely printed on a single‐layered substrate without external circuitries. A prototype with the overall size of 0.53λ₀ × 0.53λ₀ has been fabricated. Measured results exhibit the operating frequencies of about 3.51 GHz, high isolation of 16.0 dB, moderate gain of around 4.12 dBi, good radiation efficiency of 81.22%, and low envelope correlation coefficient of 0.16.     

Planar dual‐mode wideband antenna using short‐circuited‐strips loaded slotline radiator: Operation principle,design, and validation

A novel dual‐mode planar wideband slotline antenna is proposed. A pair of short‐circuited strips is symmetrically introduced along the slotline resonator near the nulls of electric field distribution of the second odd‐order resonant mode. In this way, two resonant modes are excited in a single slotline radiator and are both used for radiation in a wide frequency range. With the help of these paired strips, the dominant half‐wavelength mode can be gradually moved to the three halves‐wavelength mode, resulting to achieve a wideband radiation with two resonances. Prototype antennas are then fabricated to experimentally validate the principle and design approach of the proposed planar slotline antenna. It is shown that the proposed slotline antenna's impedance bandwidth could be effectively increased to 37.6% while keeping its inherent narrow slot configuration with length‐to‐width ratio (LWR) up to 42.00. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:573–581, 2015.     

Design of dual‐functional substrate‐integrated waveguide cavity with integration of filter and antennas

A dual‐functional substrate‐integrated waveguide (SIW) cavity which integrates a filter and two antennas is proposed in this article. Three slots are etched to divide a single cavity into four quarter‐mode subcavities. Two equal subcavities are utilized to design a second‐order filter. Mixed coupling is induced by this slot‐etched structure, where a controllable transmission zero can be generated in the lower or upper stopband. Two unequal subcavities are utilized to design two integrated antennas. By adjusting their areas, the frequency ratio of these two antennas achieves a wide range of 0.55‐1.81. In addition, the overall port isolation of higher than 21.0 dB is obtained by optimizing slot length. The proposed design has been validated by experimental results of a fabricated prototype. With advantages of low profile, light weight, suitable isolation, and flexible design, it has potential applications for modern wireless communication.     

Double U‐slots patch antenna for tri‐band wireless systems

A compact microstrip patch antenna with two U‐slots shape is presented. Detailed simulation and experimental investigation are conducted to understand the behavior of the two U‐slots. The proposed antenna generates three resonant frequencies at 2.7, 3.3, and 5.3 GHz. It can, therefore, be used in Worldwide Interoperability for Microwave Access compliant communication equipment. The proposed antenna has two U‐slot shaped and two bridge elements to connect both shapes together to adapt the structure to the desired interest operating frequency. A comprehensive parametric study has been applied to understand the effect of each U‐slot on the antenna's performance. Moreover, the current distribution for the three bands is investigated to give further understanding of the antenna behavior. The proposed antenna is verified experimentally and the simulated and measured results are in good agreement. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Design and analysis of a quad‐band substrate‐integrated‐waveguide cavity backed slot antenna for 5G applications

A planar and compact substrate integrated waveguide (SIW) cavity backed antenna and a 2 × 2 multi‐input multi‐output (MIMO) antenna are presented in this study. The proposed antenna is fed by a grounded coplanar waveguide (GCPW) to SIW type transition and planned to be used for millimeter‐wave (mm‐wave) fifth generation (5G) wireless communications that operates at 28, 38, 45, and 60 GHz frequency bands. Moreover, the measured impedance bandwidth (|S₁₁| ≤ ? 10 dB ) of the antenna covers 27.55 to 29.36, 37.41 to 38.5, 44.14 to 46.19, and 57.57 to 62.32 GHz bands and confirms the quad‐band characteristic. Omni‐directional radiation characteristics are observed in the far‐field radiation pattern measurements of the antenna over the entire operating frequency. The reported antenna is compact in size (9.7 × 13.3 × 0.6 mm³) and the gain values at each resonance frequency are measured as 3.26, 3.28, 3.34, and 4.51 dBi, respectively. Furthermore, the MIMO antenna performance is evaluated in terms of isolation, envelope correlation coefficient and diversity gain.