高性能永磁同步电机位置伺服系统建模与仿真

永磁同步电动机由于其优越的性能而广泛应用于精确的伺服控制系统中,但其绕组相电流和转速具有强耦合性,而且永磁同步电机的模型的不确定性影响了控制器的精度.文中首先建立了基于PID控制器的交流伺服系统,在此基础上又提出了一种基于自抗扰控制器的高性能永磁同步电动机位置控制器,并建立了基于该控制器的永磁同步电动机伺服系统仿真模型.仿真实验证明,与基于PID控制器的交流伺服系统相比较,基于自抗扰控制器的交流伺服系统的优越的跟踪性能和抗扰性能.     

一类轻载电液位置伺服系统线性自抗扰控制

为解决一类轻载电液位置伺服系统线性自抗扰控制器设计过程中面临的阶次选择问题,本文从系统特性、频域等角度,分析自抗扰框架中“积分器串联结构”与轻载电液位置伺服系统之间的内在联系,得到轻载电液位置伺服系统在自抗扰控制框架下是本质“一阶”系统的结论,从而合理设计了1阶线性自抗扰控制器.在此基础上,提出了有效的控制器参数整定方法,并分析了闭环系统的稳定性.仿真和试验结果表明,与高阶相比1阶线性自抗扰控制器可以更好地控制动态过程较快、负载较轻的惯性负载电液位置伺服系统,为自抗扰控制在液压伺服领域的工程应用提供了参考.     

一种新的双环结构机器人无标定自抗扰视觉伺服控制方法

在研究基于自抗扰控制器的机器人无标定视觉伺服方法的基础上，提出了一种新的双环结构机器人无标定自抗扰视觉伺服控制方法．内环采用Kalman滤波算法进行图像雅可比矩阵的在线辨识，可较好地逼近真实模型；外环采用自抗扰控制器，利用非线性观测器实时估计系统相对于当前估计模型的总扰动，并在控制中加以动态补偿．针对六自由度工业机器人进行了二维运动目标的跟踪实验，实验结果表明了该方法的可行性和有效性．     

无刷直流电机的新型控制器

自抗扰控制(ADRC)是在继承经典PID不依赖于对象模型的基础上,通过改进经典PID固有缺陷而形成的新型控制技术.为满足无刷直流电机控制系统性能要求,在分析永磁无刷直流电机特点及使用现状的基础上,建立了基于自抗扰控制器的无刷直流电机控制系统.仿真结果表明,自抗扰控制器对无刷直流电机模型的不确定性和外部扰动变化具有较强的适应性和鲁棒性,算法简单、工程适用性较强,系统具有良好的动态响应性能.     

自抗扰控制在陀螺伺服稳定系统中的应用

为了克服传统设计方法在抗干扰性和鲁棒性上的不足,在陀螺伺服稳定系统中引入了自抗扰控制方法。建立受控陀螺伺服稳定系统位置环伺服回路的数学模型,并介绍具有非线性结构的自抗扰控制器（ADRC）的基本理论。根据系统的动态指标要求,设计伺服回路的自抗扰控制器。     

运动平台上光电跟踪系统的自抗扰控制器设计

针对运动平台上光电跟踪系统既要有很强的抗扰动性能,又要能快速跟踪运动目标的特点,设计了稳定平台的自抗扰控制器.通过对闭环带宽的分析,改进了自抗扰控制器的结构,使闭环系统有较高的带宽.设计了扩张状态观测器对平台的扰动进行观测、补偿,并分析了系统鲁棒稳定性对扩张状态观测器的限制条件.实验结果显示,与采用PI控制相比,自抗扰控制器的稳定跟踪能力和扰动抑制能力都有一定的提高.其中,对阶跃信号的稳态跟踪误差不到PI的一半,而在2Hz附近扰动抑制比有6dB的提高.     

高精度轨迹跟踪的6-PRRS并联机器人自抗扰控制研究

针对6-PRRS并联机器人控制系统的非线性、耦合等特性，采用分散控制策略。在关节空间设计强鲁棒性的自抗扰控制器对其进行控制．该自抗扰控制器由非线性跟踪微分器、扩张状态观测器、非线性PD和扰动补偿4部分组成．具有模型补偿功能的扩张状态观测器可以获得系统的状态估计和未知外扰的实时作用量，使系统性能得到有效补偿．该控制器以离散的形式进行设计，易于工程实现．仿真结果证明了所提出的控制策略具有强鲁棒性，跟踪性能良好．     

自抗扰控制器及其应用

自抗扰控制器是自动检测系统的模型和外扰实时作用并予以补偿的新型控制器。介绍了自抗扰控制器对时变系统，多变量系统，最小相位系统等不同对象的使用方法。     

不同重力环境的空间机械臂自抗扰轨迹跟踪控制

针对空间机械臂在地面装调与空间应用时,由于重力环境变化导致机械臂模型发生变化的问题,提出了一种自抗扰控制算法,用于完成空间机械臂轨迹跟踪控制的任务.该算法通过将系统模型及未知外扰作为系统的总和扰动,并利用扩张状态观测器对该扰动进行观测且给予补偿,从而提高了系统抗扰的性能.当机械臂模型随重力环境变化而发生变化时,使用同一个自抗扰控制器对其末端轨迹进行控制,均能取得较好的控制效果.通过对系统的稳定性进行分析,证明了所设计控制器的有效性.将仿真结果与PD控制及自适应鲁棒控制做比较,结果表明该控制算法不仅能适应机械臂模型的变化而且还能有效抵抗系统的扰动,从而使系统具有较强的鲁棒性.     

飞机俯仰运动自抗扰控制器设计

提出了利用自抗扰控制器在大包线范围内设计飞机俯仰运动控制器的新方法．利用二阶自抗扰控制器补偿系统模型扰动和外扰，实现了纵向运动俯仰角变量的跟踪控制．自抗扰控制器直接依据飞机的非线性模型，符合飞机动力学模型摄动大的特点，在很大的包线范围内不需要改变控制器的结构和参数，简化了飞行控制律的设计过程．大包线范围内的仿真结果表明，系统具有良好的动态和稳态性能，控制器具有很强的鲁棒性，为解决大包线范围内的飞行控制问题提供了一种有效的新途径．     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.     

The Distributed Time-Triggered Simulation Scheme: Core Principles and Supporting Execution Engine

Distributed real-time simulation is a young technology field but its practice is under increasing demands. In recent years the author and his collaborators have been establishing a new approach called the distributed time-triggered simulation (DTS) scheme which is conceptually simple and easy to use but widely applicable. The concept was initiated in the course of developing a new-generation object-oriented real-time programming scheme called the time-triggered message-triggered object (TMO) programming scheme. Some fundamental issues inherent in distributed real-time simulation that were learned during recent experimental studies are discussed along with some approaches for resolving the issues. An execution engine developed to support both the TMOs engaged in control computation and the TMOs engaged in DTS is also discussed along with its possible extensions that will enable significantly larger-scale DTSs.     

Software-Konfigurationsmanagement in großen Softwareprojekten

Zusammenfassung Mit zunehmender Größe der Softwaresysteme verschärfen sich die für die Software-Herstellung typischen Probleme: Beherrschen großer Objektmengen, Erhalten der Systemkonsistenz, Kontrolle der ständigen Änderungseinflüsse und Gewährleisten einer langen Lebensdauer. Die Disziplin Konfigurationsmanagement bildet den methodischen Ansatz, diese Probleme besser zu beherrschen. Software-Konfigurationsmanagement faßt die Herstellung von Softwaresystemen als eine Abfolge von kontrollierten Änderungen an gesicherten Zwischen- und Endergebnissen auf. Dargestellt werden die Objekte und Funktionen des Software-Konfigurationsmanagements sowie die hierfür in großen Software-Projekten benötigten Methoden, Instanzen und Hilfsmittel.     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and     

Editorial:Brain-machine interface(BMI) and cyborg intelligence

正Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,and represent an area of research where significant progress has been made during the past decade.Based on BMIs,mind information can be read out by neural signals to control     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate     

SCIENCE CHINA Information Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate