共查询到20条相似文献,搜索用时 93 毫秒
1.
由传感器、微处理器和无线通信接口组成的无线传感器网络是一门日益引起人们研究兴趣的技术。它广阔地应用于医疗卫生、环境监测等领域。论文设计并实现了一种基于无线传感器技术的温度传感器监控系统。为了降低硬件成本,利用CC2430片内温度传感器进行温度采集。论文首先介绍了CC2430芯片的技术特点、基本功能,阐述了如何利用CC2430片内温度传感器进行温度测量的系统设计,给出了误差处理方法、实验的关键程序代码和实验结果。实验结果表明,基于CC2430片上温度传感器的温度监控系统适用于对监控温度精度要求不高、需自组网的环境。 相似文献
2.
由传感器、微处理器和无线通信接口组成的无线传感器网络是一门日益引起人们研究兴趣的技术.它广阔地应用于医疗卫生、环境监测等领域.论文设计并实现了一种基于无线传感器技术的温度传感器监控系统.为了降低硬件成本,利用 CC2430片内温度传感器进行温度采集.论文首先介绍了 CC2430芯片的技术特点、基本功能,阐述了如何利用CC2430片内温度传感器进行温度测量的系统设计,给出了误差处理方法、实验的关键程序代码和实验结果.实验结果表明,基于 CC2430片上温度传感器的温度监控系统适用于对监控温度精度要求不高、需自组网的环境 相似文献
3.
数控技术和数控机床的诞生开创了控制和生产领域的新时代,给机械制造业带来了一次新的技术革命.数控机床技术的迅速进步大大推进了精密、超精密加工技术的发展,使加工精度提高到了一个新的台阶,提高数控机床精度的研究也得到了极大的重视. 相似文献
4.
5.
6.
7.
8.
9.
10.
11.
图像拼接技术具有广泛的应用性,是当前图像处理领域的研究热点.由于技术原因,在拼接时会造成误配.目前一般利用全局优化的方法进行图像拼接修正,理论上较为合理,但是速度和效果方面都欠佳.针对图像在拼接过程中,位置之间的相关性,提出一种基于单元拼接理论的修正方法.提出拼接参数的相关公式,分析并证明公式的正确性,并给出修正简化规... 相似文献
12.
13.
14.
15.
MPPF ORTRAN程序中外部过程调用的多版本技术 总被引:3,自引:0,他引:3
在设计Moportran并行程序时,若外部过程调用的版本选择不当或哑,实参数的共享,私有类型不匹配,则可能导致程序出错或性能下降。本文提出了一种有效的解决方法;外部过程调用的多版本技术。 相似文献
16.
由于测量或传感器等其他原因造成测量数据中可能存在显著误差,直接进行数据校正会导致显著误差的扩散,影响数据校正结果的可靠性和准确性,因此在数据校正前,需要侦破识别并剔除含有显著误差的测量数据。现有的显著误差检测方法并不能完全识别显著误差,而且只能对有限的显著误差(小于等于3个)具有一定的检测效果,本文提出基于概率统计(3σ法则)的检测方法,识别效果优异,对3个以上的误差具有良好的侦破效果,并且采用显著误差同步补偿的方法,有效避免奇异矩阵的出现。 相似文献
17.
Recently, there has been a growth of interest in high-precision machining in multi-axis feed drive systems, which are subject to problems such as friction, cutting force and incompatibility of individual driving axis dynamics. Tracking errors in an individual driving axis during five-axis machining result in tool tip contour error and tool orientation contour error. Based on the conventional definition of the tool orientation contour error, that is, it is the deviation in the normal direction from the desired orientation in spherical coordinates, even if the tool tip and tool orientation contour errors are very small, a mismatch between the tool tip position and tool orientation causes an overcut or undercut when these errors are treated independently. To address this problem of mismatch, this paper presents a new definition of the actual tool orientation contour error. This definition considers synchronization between the tool tip and tool orientation contour errors. In addition, we propose an estimation model for the tool orientation contour error. Experimental results demonstrate that the proposed model provides a better indication of the actual tool orientation contour error than the conventional definition. 相似文献
18.
Vítor Carvalho Michael Belsley Rosa M. Vasconcelos Filomena O. Soares 《Digital Signal Processing》2013,23(5):1427-1440
This paper presents a study undertaken to identify the type and location of yarn periodical errors using three different signal processing approaches based on FFT – Fast Fourier Transform, FWHT – Fast Walsh–Hadamard Transform and FDFI – Fast Impulse Frequency Determination. Available commercial equipment is based exclusively on an FFT approach which is unable to clearly detect all types of periodical yarn errors, particularly impulse errors. The theoretical basis of each the three signal processing techniques is described. Their performance when applied to several simulated errors, namely, pulse errors and impulse errors is analyzed in detail. Finally, the three different techniques? ability to successfully characterize errors in actual data taken from real textile yarns with known sinusoidal errors is explored and commented upon. 相似文献
19.
为提高磁场式时栅传感器测量精度,本文从理论上推导分析了时栅传感器激励信号源幅值和相位不一致产生的谐波成分对时栅传感器测量精度的影响,提出了一种基于DDS原理并采用完整闭环调节的高性能时栅激励信号源设计方案。以FPGA为微处理器,通过编程分频系统时钟,设置频率、相位控制字对DDS输出的信号频率、相位进行调节,使用增益控制器配合相位累加器实现相位到幅值精确转换。搭建了信号调理电路和信号反馈电路,通过实时对比反馈控制,解决了系统电路阻抗不匹配及干扰导致的激励信号相位不正交性和幅值不一致性的问题。实验结果表明:本文所设计的激励信号源输出信号幅值相对误差只有0.4%,正交性相对误差只有0.05%,并且采用该激励信号源,磁场式时栅传感器测角原始误差从±103.4"降低到了±20.3",有效抑制由于激励信号源幅值不一致和相位不正交带来的谐波误差。经修正后对极内角位移测量误差只有±1.3",整周角位移测量精度达到±2",满足高精度位移测量要求。 相似文献