Tethered DNA scaffolds on optical sensor platforms for detection of hipO gene from Campylobacter jejuni

DNA biosensors have gained increased attention over traditional diagnostic methods due to their fast and responsive operation and cost-effective design. The specificity of DNA biosensors relies on single-stranded oligonucleotide probes immobilized to a transduction platform. Here, we report the development of biosensors to detect the hippuricase gene (hipO) from Campylobacter jejuni using direct covalent coupling of thiol- and biotin-labeled single-stranded DNA (ssDNA) on both surface plasmon resonance (SPR) and diffraction optics technology (DOT, dotLab) transduction platforms. This is the first known report of the dotLab to detect targeted DNA. Application of 6-mercapto-1-hexanol as a spacer thiol for SPR gold surface created a self-assembled monolayer that removed unbound ssDNA and minimized non-specific detection. The detection limit of SPR sensors was shown to be 2.5 nM DNA while dotLab sensors demonstrated a slightly decreased detection limit of 5.0 nM (0.005 μM). It was possible to reuse the SPR sensor due to the negligible changes in sensor sensitivity (∼9.7 × 10⁻⁷ ΔRU) and minimal damage to immobilized probes following use, whereas dotLab sensors could not be reused. Results indicated feasibility of optical biosensors for rapid and sensitive detection of the hipO gene of Campylobacter jejuni using specific ssDNA as a probe.     

Potassium ion sensing using a self-assembled calix[4]crown monolayer by surface plasmon resonance

The precise detection of K⁺ ion is crucial because K⁺ ion plays a leading role in membrane transport. Current K⁺ ion detection methods suffered low resolution and detection limit. Calix[4]crown-5 derivatives are well known as K⁺ ionophores. We described here a K⁺ ion-sensing system using a self-assembled monolayer of calix[4]crown-5 derivative (calix[4]crown) modified gold chip based on surface plasmon resonance (SPR). The calix[4]crown sensing layer was characterized by atomic-force microscopy (AFM), SPR, Fourier transform infrared reflection absorption spectroscopy (FTIR-RAS) and cyclic voltammetry (CV). It was found calix[4]crown was assembled as a monolayer on Au surface. The SPR angle was found to be modulated by various concentrations of K⁺ ion due to the interaction between the calix[4]crown and K⁺ ion. This calix[4]crown monolayer showed a more sensitive and selective binding toward potassium ion over other alkali and alkaline earth metal ions. From the simple SPR spectroscopic analysis, we were able to monitor K⁺ ion concentration with a wide range of 1.0 × 10⁻¹² to 1.0 × 10⁻² M in an aqueous solution with a pH 6–8. These experimental results showed a useful method for the design of simple and precise potassium ion biosensors.     

A multichannel surface plasmon resonance sensor using a new spectral readout system without moving optics

Surface plasmon resonance (SPR) sensors with spectral interrogation provide a high refractive index resolution, a large dynamic range and a fixed optical detection module. In this work, we propose a new multichannel spectral detection unit that uses only one spectrometer to measure the reflection spectrum from multiple sensing spots serially without any mechanical movement. This spectral detection unit is designed based on a spatial light modulator (SLM) configured as a programmable optical aperture for the spectrometer. To demonstrate this concept, a five-channel laboratory SPR prototype was built based on the proposed multichannel detection unit, and we evaluated the device's sensitivity and resolution using a refractive index test. Refractive index resolution of 1.4 × 10⁻⁶ refractive index units (RIU) can be reached using the five-channel prototype. This sensor is suitable for low-cost multichannel biosensing applications that do not contain fast kinetics.     

Integrated CMOS optical sensor for cell detection and analysis

To circumvent the complexity of the detection systems of microfluidic devices, Hartley et al. recently reported on a CMOS optical active pixel sensor (APS) for near-field detection and counting of microscopic particles. To further enhance the digital cytometric capabilities of the original sensor, we modified and utilized a dual APS-array scheme to facilitate the determination of the velocity and size of particles flowing in microfluidic channels. Our findings indicate that the prototype dual-APS sensor is capable of detecting particle velocities up to ～500 μm/s and particles with diameter in the range of 5–15 μm. The dual APS CMOS sensor, as a result of the hybrid integration with a microfluidic, provides a low cost and practical means of noninvasively monitoring the contents of microfluidic and lab-on-a-chip devices.     

Graphene-polyaniline composite film modified electrode for voltammetric determination of 4-aminophenol

An electrochemical sensor based on graphene-polyaniline (GR-PANI) nanocomposite for voltammetric determination of 4-aminophenol (4-AP) is presented. The electrochemical behavior of 4-AP at the GR-PANI composite film modified glassy carbon electrode (GCE) was investigated by cyclic voltammetry. 4-AP exhibits enhanced voltammetric response at GR-PANI modified GCE. This electrochemical sensor shows a favorable analytical performance for 4-AP detection with a detection limit of 6.5 × 10⁻⁸ M and high sensitivity of 604.2 μA mM⁻¹. Moreover, 4-AP and paracetamol can be detected simultaneously without interference of each other in a large dynamic range.     

Full-field surface plasmon resonance sensor for high resolution refractive index measurement using common-path heterodyne interferometer

This study presents a full-field surface plasmon resonance (SPR) sensor induced by attenuated total reflection (ATR)-couple for liquid refractive index measurement. The system adopts a common-path heterodyne interferometer to measure the phase difference between P- and S-wave after passing through the SPR sensor. In order to realize the full-field measurement, it adopts a three-frame integrating-bucket method. The experimental results show great consistency profile between single point and full-field liquid refractive index measurement from 1.330 to 1.340 RIU. It shows that the best sensitivity and resolution of a single pixel in charge couple device (CCD) for liquid refractive measurement are 3.3 × 10⁴ (deg/RIU) and 3.53 × 10⁻⁶ (RIU), respectively. As compared with traditional single-point method, the proposed method with a regular CCD has no degradation. Therefore, the system has many applications in chemistry and biology.     

Determination of 3-nitrotyrosine in human urine samples by surface plasmon resonance immunoassay

This paper describes the detection of a low-molecular weight molecule, 3-nitrotyrosine (3-NT) (∼226 Da), in human urine by coupling indirect inhibition assay with a surface plasmon resonance (SPR) sensor. 3-NT antibody (anti-3-NT Ab, mouse IgG) was used in this assay. An optimal antibody concentration has been measured at 27.9 μg/mL in order to obtain the best performance of the sensor surface. The lowest detection limit for 3-NT with this method is 4.7 ng/mL (S/N = 3). Sensor reliability was demonstrated by good specificity, intra-assay and inter-assay relative standard deviations <8%, average recovery of 107.68 ± 19.4% and sensor surface (self-assembled monolayer) stability through more than 200 regeneration cycles and 15 days of repeated measurement. This is the first SPR biosensor assay of 3-NT in human urine. The high stability of the SPR sensor surface underlies the potential of the SPR method as a low cost diagnostic tool for clinical detection of 3-NT.     

动态范围可调的波导型SPR传感器模型

表面等离子体共振 (SPR)技术是一种简单直接的传感技术 ,SPR对金属表面附近的折射率的变化极为敏感 ,利用这一性质 ,表面等离子体共振传感器已成为生物传感器研究领域的热点。现提出一种电光调制波导型SPR模型 ,模拟计算表明该模型在不损害灵敏度的条件下 ,扩大了探测的动态范围。     

Highly accurate and sensitive surface plasmon resonance sensor based on channel photonic crystal waveguides

A highly sensitive surface plasmon resonance (SPR) sensor based on channel photonic crystal waveguide (PCW) is proposed. The PCW is based on widely used lithographic and nano-fabrication compatible materials like TiO₂ and SiO₂. Gold has been used as a SPR active metal. By rigorously optimizing the different waveguide parameters, we have shown that there is significant transfer of modal power around phase-matching or resonance wavelength which has been utilized to design a compact and highly sensitive sensor for lab on chip. The ultra narrow width (∼765 pm for an interaction length of 10 mm) of surface plasmon resonance curve and sensitivity as high as 7500 nm-RIU⁻¹ will open a new window for bio-chemical sensing applications.     

An automated microfluidic colourimetric sensor applied in situ to determine nitrite concentration

A stand-alone sensor system with integrated sub-systems is demonstrated. The system is portable and capable of in situ reagent-based nutrient analysis. The system is based on a low cost optical detection method, together with an automated microfluidic delivery system that is able to detect nitrite with a limit of detection (LOD) of 15 nM. The sensor was operated in situ at Southampton Dockhead for 57 h (December 2010) and 375 measurements were taken.     

Ultrasensitive immunosensing of tuberculosis CFP-10 based on SPR spectroscopy

An antigen (Ag), CFP-10, found in tissue fluids of tuberculosis (TB) patients may be an ultimate candidate for use as a sensitive TB marker with a sensing method for early simplified diagnosis of TB. In this study, chemical and optical optimizations were carried out using novel immuno-materials for establishment of a self-assembled surface plasmon resonance (SPR) optical immunosensor system for detection of CFP-10, which is valuable for pre-clinical work, prior to conduct of massive clinical observations. For creation of a simple sensing interface, a monoclonal antibody (anti-CFP-10) was immobilized directly on a gold surface, followed by blocking with cystamine. Orientation and accessibility of anti-CFP-10 were assessed by the selective binding of CFP-10. Recent results indicate that the reusability of the sensor chip adopting the cystamine method was found to be preferable to other immobilization methods. A linear relationship was well correlated between SPR angle shift and CFP concentrations in the range from 100 ng mL⁻¹ to 1 μg mL⁻¹. Modification of the SPR chip with antibody provides a simple experimental platform for investigation of isolated proteins under experimental conditions resembling those of their native environment.     

Study on design and application of fully automatic miniature surface plasmon resonance concentration analyzer

A fully automatic miniature surface plasmon resonance (SPR) concentration analyzer having high performance and low cost and developed using a Spreeta™ sensor was designed for field applications and concentration analysis. As in the case of Biacore™ instruments, the automatic sampling system of this device can introduce air segments between the sample/regeneration solution and buffer solution in the pipeline, which effectively prevents mixing of the solutions. A temperature sensor (AD 590) and temperature compensation method are used, which make the device insensitive to temperature fluctuations. A real-time data-smoothing algorithm for the SPR detection data is adopted; this can reduce the noise level to 5 × 10⁻⁷ RIU (refractive index units). The noise level of the sensorgram is 3.5% of the original level. Two types of self-prepared sensing chips—SMX-BSA (bovine serum albumin coated with sulfamethoxazole) and SMX-CM5 (carboxymethyl dextran coated with sulfamethoxazole)—are used to analyze the concentrations of sulfamethoxazole (SMX) standard solutions. Each chip's SMX calibration curve is established within the measurement range of 0-2000 ng/ml, and both limits of detection (LOD) are 2 ng/ml. One cycle of assay time is less than 15 min.     

Optical fiber chemical sensing of Hg(II) ions in aqueous samples using a microfluidic device containing a selective tripodal chromoionophore-PVC film

A novel methodology for the determination of Hg(II) ions was developed based on optical fiber chemical sensing in a microfluidic device containing a selective tripodal chromoionophore (i.e. tris[2-(4-phenyldiazenyl)phenylamino)ethoxy]cyclotriveratrylene/TPPECTV)-PVC film. Absorbance detection was performed by incorporating a single optical fiber on the top and the bottom of the detection zone of the microfluidic device. In this micro-sensing system, the intensity of the absorption maximum at 495 nm of the TPPECTV-Hg(II) complex linearly increases as a function of the Hg(II) ion concentration in the range 1.0 × 10⁻⁶ to 2.5 × 10⁻⁴ M, with a detection limit of 0.5 μM. Interference from other heavy metal ions was not observed at significant levels. The absorbance results of the detection of Hg(II) ions in environmental water samples (river water) are in good agreement with those obtained by a macro-scale system (cold vapor atomic absorption spectrometry/CVAAS).     

Fabrication of microfluidic devices for packaging CMOS MEMS impedance sensors

This work presents a polydimethylsiloxane (PDMS) microfluidic device for packaging CMOS MEMS impedance sensors. The wrinkle electrodes are fabricated on PDMS substrates to ensure a connection between the pads of the sensor and the impedance instrument. The PDMS device can tolerate an injection speed of 27.12 ml/h supplied by a pump. The corresponding pressure is 643.35 Pa. The bonding strength of the device is 32.44 g/mm². In order to demonstrate the feasibility of the device, the short circuit test and impedance measurements for air, de-ionized water, phosphate buffered saline (PBS) at four concentrations (1, 2 × 10⁻⁴, 1 × 10⁻⁴, and 6.7 × 10⁻⁵ M) were performed. The experimental results show that the developed device integrated with a sensor can differentiate various samples.     

Design considerations for plasmonic-excitation based optical detection of liquid and gas media in infrared

Surface plasmon resonance (SPR) sensor schemes based on silicon (Si) and chalcogenide glass are evaluated and compared for chemical as well as gas detection in a wide range of infrared (IR) wavelengths. The plasmonic characteristics in IR are critically dependent on the dispersive behavior of the coupling substrate material. The performance of sensor has been evaluated in terms of its intrinsic sensitivity (IS) that includes the FWHM and angular shift of SPR curve for a given change in refractive index of sensing medium. Both these materials are potential candidates for opening up new routes for detection in near- and mid-IR due to their strong dispersion capabilities as compared to normal silica-based glass. The IS of chalcogenide glass-based SPR sensor is found to be larger than Si-based one for a broad wavelength range of 700–2500 nm indicating that chalcogenide glass-based probe provides more sensitive as well as accurate sensing procedure than Si-based probe. Further, for both glasses, the single probe can be used for both aqueous as well as gaseous sensing. Furthermore, for both glasses, it is found that the values of IS are much larger for gaseous sensing in comparison to liquid sensing.     

Environmentally friendly disposable sensors with microfabricated on-chip planar bismuth electrode for in situ heavy metal ions measurement

This paper presents an environmentally friendly disposable heavy metal ion sensor for in situ and online monitoring in the nature and physiological systems. The miniaturized sensor chip consists of a non-toxic microfabricated bismuth (Bi) working electrode that replaces the conventional mercury electrodes, an integrated Ag/AgCl reference electrode, a gold counter electrode, and microfluidic channels. In this work, the electrochemical behavior of the Bi working electrode was characterized in several non-deaerated buffer solutions using cyclic voltammetry. The detection and quantification of Pb (II) and Cd (II) were statically performed using anodic stripping voltammetry inside the microchannels, in the Pb (II) concentration range of 25–400 ppb (R² = 0.991) with limit of detection of 8 ppb for 60 s deposition, and in the Cd (II) concentration range of 28–280 ppb (R² = 0.986) with limit of detection of 9.3 ppb for 90 s deposition. Particularly, the applications of this sensor chip have been reported with the examples of in situ measurement of Cd (II) concentration in soil pore and ground water and online direct measurement of Cd (II) concentration in cell culture media in its native environment.     

A sensitive hydrazine electrochemical sensor based on electrodeposition of gold nanoparticles on choline film modified glassy carbon electrode

A highly sensitive hydrazine sensor was developed based on the electrodeposition of gold nanoparticles onto the choline film modified glassy carbon electrode (GNPs/Ch/GCE). The electrochemical experiments showed that the GNPs/Ch film exhibited a distinctly higher activity for the electro-oxidation of hydrazine than GNPs with 3.4-fold enhancement of peak current. The kinetic parameters such as the electron transfer coefficient (α) and the rate of electron exchange (k) for the oxidation of hydrazine were determined. The diffusion coefficient (D) of hydrazine in solution was also calculated by chronoamperometry. The sensor exhibited two wide linear ranges of 5.0 × 10⁻⁷-5.0 × 10⁻⁴ and 5.0 × 10⁻⁴-9.3 × 10⁻³ M with the detection limit of 1.0 × 10⁻⁷ M (s/n = 3). The proposed electrode presented excellent operational and storage stability for the determination of hydrazine. Moreover, the sensor showed outstanding sensitivity, selectivity and reproducibility properties. All the results indicated a good potential application of this sensor in the detection of hydrazine.     

Component design and testing for a miniaturised autonomous sensor based on a nanowire materials platform

We present the design considerations of an autonomous wireless sensor and discuss the fabrication and testing of the various components including the energy harvester, the active sensing devices and the power management and sensor interface circuits. A common materials platform, namely, nanowires, enables us to fabricate state-of-the-art components at reduced volume and show chemical sensing within the available energy budget. We demonstrate a photovoltaic mini-module made of silicon nanowire solar cells, each of 0.5 mm² area, which delivers a power of 260 μW and an open circuit voltage of 2 V at one sun illumination. Using nanowire platforms two sensing applications are presented. Combining functionalised suspended Si nanowires with a novel microfluidic fluid delivery system, fully integrated microfluidic–sensor devices are examined as sensors for streptavidin and pH, whereas, using a microchip modified with Pd nanowires provides a power efficient and fast early hydrogen gas detection method. Finally, an ultra-low power, efficient solar energy harvesting and sensing microsystem augmented with a 6 mAh rechargeable battery allows for less than 20 μW power consumption and 425 h sensor operation even without energy harvesting.     

Development of a microfabricated electrochemical-cantilever hybrid platform

The design and fabrication of a combined electrochemical-cantilever microfluidic system is described. A chip integrating cantilevers with electrodes into a microchannel is presented with the accompanying polymer flow cell. Issues such as electrical and fluid connections are addressed, electromechanical behavior in ionic solution is investigated, and two uses of the system are demonstrated. First, all cantilevers are functionalized with cysteine, to facilitate detection of Cu²⁺ ions, then one cantilever is electrochemically cleaned in situ to generate a reference cantilever for differential measurements. Two concentrations of Cu²⁺ ions are successfully measured in this way. Clean cantilevers are used to probe a solution with and without [Fe(CN)₆]^3−/4− redox couple present, demonstrating the combined voltammetric and deflection readout.     

Surface plasmon resonance sensor based on a single-mode polarization-maintaining optical fiber

A novel wavelength modulation-based fiber-optic surface plasmon resonance (SPR) sensor is reported which utilizes both polarization separation and broad band radiation depolarization in polarization-maintaining fibers to enhance sensor stability. Theoretical analysis of the sensing structure with ideally separated polarizations based on the mode of expansion and propagation method is presented. The effect of polarization cross-coupling was also analyzed in the approximation of an equivalent bulk optic structure. A laboratory prototype of the fiber-optic SPR sensor was characterized in terms of sensitivity and resolution. Experimental results indicate that this fiber-optic SPR sensor is able to resolve refractive index changes as low as 4×10⁻⁶ under moderate fiber deformations.