Defect‐Engineering‐Enabled High‐Efficiency All‐Inorganic Perovskite Solar Cells

The emergence of cesium lead iodide (CsPbI₃) perovskite solar cells (PSCs) has generated enormous interest in the photovoltaic research community. However, in general they exhibit low power conversion efficiencies (PCEs) because of the existence of defects. A new all‐inorganic perovskite material, CsPbI₃:Br:InI₃, is prepared by defect engineering of CsPbI₃. This new perovskite retains the same bandgap as CsPbI₃, while the intrinsic defect concentration is largely suppressed. Moreover, it can be prepared in an extremely high humidity atmosphere and thus a glovebox is not required. By completely eliminating the labile and expensive components in traditional PSCs, the all‐inorganic PSCs based on CsPbI₃:Br:InI₃ and carbon electrode exhibit PCE and open‐circuit voltage as high as 12.04% and 1.20 V, respectively. More importantly, they demonstrate excellent stability in air for more than two months, while those based on CsPbI₃ can survive only a few days in air. The progress reported represents a major leap for all‐inorganic PSCs and paves the way for their further exploration in order to achieve higher performance.     

Metal Oxide Semiconductors for Dye‐ and Quantum‐Dot‐Sensitized Solar Cells

This Review provides a brief summary of the most recent research developments in the synthesis and application of nanostructured metal oxide semiconductors for dye sensitized and quantum dot sensitized solar cells. In these devices, the wide bandgap semiconducting oxide acts as the photoanode, which provides the scaffold for light harvesters (either dye molecules or quantum dots) and electron collection. For this reason, proper tailoring of the optical and electronic properties of the photoanode can significantly boost the functionalities of the operating device. Optimization of the functional properties relies with modulation of the shape and structure of the photoanode, as well as on application of different materials (TiO₂, ZnO, SnO₂) and/or composite systems, which allow fine tuning of electronic band structure. This aspect is critical because it determines exciton and charge dynamics in the photoelectrochemical system and is strictly connected to the photoconversion efficiency of the solar cell. The different strategies for increasing light harvesting and charge collection, inhibiting charge losses due to recombination phenomena, are reviewed thoroughly, highlighting the benefits of proper photoanode preparation, and its crucial role in the development of high efficiency dye sensitized and quantum dot sensitized solar cells.     

Advances in Solution‐Processed Multijunction Organic Solar Cells

The efficiency of organic solar cells can benefit from multijunction device architectures, in which energy losses are substantially reduced. Herein, recent developments in the field of solution‐processed multijunction organic solar cells are described. Recently, various strategies have been investigated and implemented to improve the performance of these devices. Next to developing new materials and processing methods for the photoactive and interconnecting layers, specific layers or stacks are designed to increase light absorption and improve the photocurrent by utilizing optical interference effects. These activities have resulted in power conversion efficiencies that approach those of modern thin film photovoltaic technologies. Multijunction cells require more elaborate and intricate characterization procedures to establish their efficiency correctly and a critical view on the results and new insights in this matter are discussed. Application of multijunction cells in photoelectrochemical water splitting and upscaling toward a commercial technology is briefly addressed.     

Realizing Over 13% Efficiency in Green‐Solvent‐Processed Nonfullerene Organic Solar Cells Enabled by 1,3,4‐Thiadiazole‐Based Wide‐Bandgap Copolymers

Two novel wide‐bandgap copolymers, PBDT‐TDZ and PBDTS‐TDZ, are developed based on 1,3,4‐thiadiazole (TDZ) and benzo[1,2‐b:4,5‐b′]dithiophene (BDT) building blocks. These copolymers exhibit wide bandgaps over 2.07 eV and low‐lying highest occupied molecular orbital (HOMO) levels below −5.35 eV, which match well with the typical low‐bandgap acceptor of ITIC, resulting in a good complementary absorption from 300 to 900 nm and a low HOMO level offset (≤0.13 eV). Compared to PBDT‐TDZ, PBDTS‐TDZ with alkylthio side chains exhibits the stronger optical absorption, lower‐lying HOMO level, and higher crystallinity. By using a single green solvent of o‐xylene, PBDTS‐TDZ:ITIC devices exhibit a large open‐circuit voltage (V_oc) up to 1.10 eV and an extremely low energy loss (E_loss) of 0.48 eV. At the same time, the desirable high short‐circuit current density (J_sc) of 17.78 mA cm⁻² and fill factor of 65.4% are also obtained, giving rise to a high power conversion efficiency (PCE) of 12.80% without any additive and post‐treatment. When adopting a homotandem device architecture, the PCE is further improved to 13.35% (certified as 13.19%) with a much larger V_oc of 2.13 V, which is the best value for any type of homotandem organic solar cells reported so far.     

Improved Domain Size and Purity Enables Efficient All‐Small‐Molecule Ternary Solar Cells

An all‐small‐molecule ternary solar cell is achieved with a power conversion efficiency of 10.48% by incorporating phenyl‐C₇₁‐butyric‐acid‐methyl ester (PC₇₁BM) into a nonfullerene binary system. The addition of PC₇₁BM is found to modulate the film morphology by improving the domain purity and decreasing the domain size. This modulation facilitates charge generation and suppresses charge recombination, as manifested by the significantly enhanced short‐circuit current density and fill factor. The results correlate the domain characteristics with the device performance and offer new insight from the perspective of morphology modulation for constructing efficient ternary devices.     

High‐Performance Additive‐/Post‐Treatment‐Free Nonfullerene Polymer Solar Cells via Tuning Molecular Weight of Conjugated Polymers

In recent years, rapid advances are achieved in polymer solar cells (PSCs) using nonfullerene small molecular acceptors. However, no research disclosing the influence of molecular weight (M_n) of conjugated polymer on the nonfullerene device performance is reported. In this work, a series of polymers with different M_ns are synthesized to systematically investigate the connection between M_n and performance of nonfullerene devices for the first time. It is found that the device performance improves substantially as the M_n increases from 12 to 38 kDa and a power conversion efficiency (PCE) as high as 10.5% is realized. It has to be noted this PCE is achieved without using any additives and post‐treatments, which is among the top efficiencies of additive‐ and post‐treatment‐free PSCs. Most importantly, the variation trend of the optimal active layer thickness and morphology is significantly different from the device with fullerene as acceptor. The findings clarify the effect of M_n on the performance of nonfullerene PSCs, which would benefit further efficiency improvement of nonfullerene PSCs.     

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

Solution‐processed bulk‐heterojunction solar cells have gained serious attention during the last few years and are becoming established as one of the future photovoltaic technologies for low‐cost power production. This article reviews the highlights of the last few years, and summarizes today's state‐of‐the‐art performance. An outlook is given on relevant future materials and technologies that have the potential to guide this young photovoltaic technology towards the magic 10% regime. A cost model supplements the technical discussions, with practical aspects any photovoltaic technology needs to fulfil, and answers to the question as to whether low module costs can compensate lower lifetimes and performances.