PP三元共混合金的力学性能及结晶行为研究

研究了不同乙烯含量的ＥＰＤＭ对ＰＰ／ＵＨＭＷＰＥ合金的增容作用,并讨论了共混体系结晶行为的变化情况。发现ＥＰＤＭ中乙烯含量的增加可提高增容效果;在ＰＰ／ＵＨＭＷＰＥ／ＥＰＤＭ为１００／１０／６时,共混物缺口冲击强度可达９１．１ｋＪ／ｍ＾２,为ＰＰ的３．５倍,此时拉伸强度仍比纯ＰＰ高４．３ＭＰａ。     

三维碳化硅/碳化硅陶瓷基编织体复合材料

采用化学气相浸渗法（ＣＶＩ）,制备出三维Ｈｉ－ＮｉｃａｌｏｎＳｉＣ／ＳｉＣ陶瓷基编织体复合材料．经３０ｈ ＣＶＩ致密化处理后,复合材料的密度达到 ２５９·ｃｍ－３,所研制的三维 ＳｉＣ／ＳｉＣ复合材料不仅具有较高的强度,而且表现出优异的韧性和类似金属材料非灾难性的断裂特征．复合材料的主要力学性能指标为：弯曲强度 ８６０ＭＰａ,断裂位移 １．２ｍｍ,断裂韧性４１．５ＭＰａ·ｍ１／２,断裂功２８．１ｋＪ·ｍ－２,冲击韧性３６．０ｋＪ·ｍ－２．     

MAGNETIC PROPERTIES AND APPLICATIONS OF NEWLY-DEVELOPED NANOCRYSTALLINE Fe_(73.5)Cu_1Nb_2V_1Si_(13.5)B_9 ALLOY

报道了新开发的纳米晶Ｆｅ７３．５Ｃｕ１Ｎｂ２Ｖ１Ｓｉ１３．５Ｂ９合金的综合软磁性能。新合金的高频铁损水平为：Ｐ３／１００ｋ＝５１０ｋＷ·ｍ－３，Ｐ２／２００ｋ＝７４８ｋＷ·ｍ－３，Ｐ２／５００ｋ＝３６７１ｋＷ·ｍ－３和Ｐ０．５／１０００ｋ＝８７１ｋＷ·ｍ－３。新合金的铁损比早期开发的纳米晶Ｆｅ－Ｃｕ－Ｎｂ－Ｓｉ－Ｂ合金的低且明显低于优良的功率Ｍｎ－Ｚｎ铁氧体Ｈ７ｃ４的铁损。对铁损与频率和幅值磁通密度的关系进行了分析。也报道了新合金在若干方面的实际应用。     

Sm8Fe83Si2C5Cu0.5Nb1.5非晶合金的晶化动力学

用差热分析（ＤＴＡ）,结合Ｘ射线衍射（ＸＲＤ）研究了Ｓｍ８Ｆｅ８３Ｓｉ２Ｃ５Ｃｕ０．５Ｎｂ１．５非晶合金的晶化动力学。结果表明：温度在０￣１０００℃范围内,该合金的晶化相为α－Ｆｅ和Ｓｍ２（ＦｅＳｉ）１７Ｃｘ,α－Ｆｅ相的晶化表观激活能力３４９．５３ｋＪ／ｍｏｌ,Ｓｍ２（ＦｅＳｉ）１７Ｃｘ的晶化表观激活能力３１６．１９ｋＪ／ｍｏｌ,两相在晶化初期激活能量小,随晶化量（ｘｃ）的增加激活能增大,当α－     

曝光时对DCG中Cr2P3／2XPS谱的影响的研究

通过对不同曝光量的重络酸盐明胶（ＤＣＧ）中的Ｃｒ２Ｐ３／２ＸＰＳ（Ｘ射线光电子能谱）的测定发现，Ｃｒ２Ｐ３／２ＸＰＳ谱随曝光量呈规律性的变化；在０￣１９５ｍＪ／ｃｍ＾２曝光量范围内，它的１／５高密度（ＦＷＦＭ，即：ｔｈｅ ｆｕｌｌ ｗｉｄｔｈ ａｔ ｆｉｆｔｈ ｍａｘｉｍｕｍ）和５７６．４ｅＶ附近的峰的相对强度先随曝光量的增加而减小；相反，它的５７９．４ｅＶ和５７７．４ｅＶ附近的两个峰的相对强度却     

Fe73.5Cu0.8Nb2V1.2Si11.5B11新型纳米晶合金的研究

报道了Ｆｅ７３５Ｃｕ０８Ｎｂ２Ｖ１２Ｓｉ１１５Ｂ１１新型纳米晶合金的研究结果。透射电镜和穆斯堡尔谱研究表明，合金经８４３Ｋ，０５ｈ真空退火，形成由平均晶粒尺寸为１８ｎｍ左右的αＦｅ（Ｓｉ）相（～７８％）和剩余非晶组成的显微结构。合金的饱和磁感应强度为１４Ｔ，ｆ＝１ＫＨｚ时最大有效磁导率（μｅ）为７１８×１０－３Ｈ／ｍ，Ｐ１２／２ｋ２１ｋＷ／ｍ３，Ｐ１１／１０ｋ２１８ｋＷ／ｍ３，Ｐ０５／２０ｋ１５７ｋＷ／ｍ３，Ｐ０２／１００ｋ３００ｋＷ／ｍ３，矫顽力Ｈｃ≈１１Ａ／ｍ。合金具有明显的磁场处理效果，经纵向和横向磁场退火后，其Ｂ３０、α３０分别为１４４Ｔ，０９０和１３０Ｔ、０１。与Ｆｅ７３５Ｃｕ１Ｎｂ３Ｓｉ１３５Ｂ９相比，由于用Ｖ代替了部分Ｎｂ，提高了熔体流动性，改善了快淬合金带材的机械特性，降低了成本。     

高性能2.5Gb／s用的DFB—LD／EA单片集成器件

报导了采用全ＭＯＣＶＤ生长的１．５５μｍ的单片集成ＤＦＢ＝ＬＤ／ＥＡ组件的 在ＤＷＤＭ系统上的传输测试结果，出纤功率Ｐｆ≥２．５ｍＷ＠Ｉｆ＝７５ｍＡ，边模抑制比ＳＭＳＲ〉３５ｄＢ，调制器反向偏压为２．５Ｖ时的消光比为１４ｄＢ，该发射模块在２．５Ｇｂ／ｓＤＷＤＭ系统上进行了传输试验，传输２４０Ｋｍ后无误码，其通道代价≤１ｄＢ＠ＢＥＲ＝１０＾－１２。     

PS／粉末SBR—g—S共混体研究：Ⅱ.粉末SBR—g—S的相结构 …

测定了ＳＢＲ－ｇ－Ｓ的接枝率,用ＴＥＭ检测了粉末ＳＢＲ－ｇ－Ｓ（ＰＲ）的相结构。用ＤＳＣ测定了ＰＳ／ＰＲ共混体的Ｔｇ,研究了ＰＳ／ＰＲ共混体的相容性。结果发现,在接枝率为３２．６％的粉末非交联ＳＢＲ－ｇ－Ｓ（ＰＲ１）的相结构中ＳＢＲ为连续相,在连续相中均匀分布着直径约０．０１μ的ＰＳ微区;ＰＳ为细胞状分散相,粒径１～５μｍ,分散相含有ＳＢＲ包藏物。在接枝率为８．５％的粉末交联ＳＢＲ－ｇ－Ｓ（ＰＲ２     

PVC／CEVA共混体系相容性研究

采用ＤＳＣ对ＰＶＣ／ＣＥＶＡ溶液共混物的玻璃化转变进行了研究。结果表明，对ＣＥＶＡ／ＰＶＣ质量比分别为１：９、２：８、４：６、８：２的共混体系，各共混物均分别出现一个明显的玻璃化转变温度，表明ＶＡｃ质量含量为５．９％，但氯含量为５８％的ＣＥＶＡ与ＰＶＣ具有较好的相容性，这是ＣＲ－ＭＭＡ－ＣＥＶＡ接枝共聚物对增塑ＰＶＣ人造革显示出较高粘合性能的主要根源。     

Fe73.5Cu1Nb3Si13.5B9非晶合金的晶化动力学

用ＤＴＡ结合ＸＲＤ了Ｆｅ７３．５Ｃｕ１Ｎｂ３Ｓｉ１３．５Ｂ９晶合金的晶化动力学。表明，该事金在５００℃时析出α－Ｆｅ（Ｓｉ）相。晶化初期激活能最小为２４２ｋＪ／ｍｏｌ，它随晶化量的增加，在ＸＣ为０．４－０．８时，呈极大值为５２０ｋＪ／ｍｏｌ。在６２４℃时析出Ｆｅ２Ｂ相。     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.     

Early ironwork in Biscay: Survey,excavation, experimentation and materials characterization. An integral study of the mountainside ironworks (ferrerías de monte or “haizeolak”)

ABSTRACT

The production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials.     

Mechanism Study on the Wear of CrAlTiN Coated High-Speed Steel Twist Drills Under Dry Cutting Conditions

As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.     

Study on Bond Ability of Arc-Spraying Coatings with Different Surface Pretreatment on Cast-Iron

Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting.     

Structural Characteristics of TiO2 Ceramic Coating by Micro-Plasma Oxidation

TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure.     

Evaluation of fatigue life of steel using steel grain size

The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase.