Unraveling the Raman Enhancement Mechanism on 1T′‐Phase ReS2 Nanosheets

2D transition metal dichalcogenides materials are explored as potential surface‐enhanced Raman spectroscopy substrates. Herein, a systematic study of the Raman enhancement mechanism on distorted 1T (1T′) rhenium disulfide (ReS₂) nanosheets is demonstrated. Combined Raman and photoluminescence studies with the introduction of an Al₂O₃ dielectric layer unambiguously reveal that Raman enhancement on ReS₂ materials is from a charge transfer process rather than from an energy transfer process, and Raman enhancement is inversely proportional while the photoluminescence quenching effect is proportional to the layer number (thickness) of ReS₂ nanosheets. On monolayer ReS₂ film, a strong resonance‐enhanced Raman scattering effect dependent on the laser excitation energy is detected, and a detection limit as low as 10^?9m can be reached from the studied dye molecules such as rhodamine 6G and methylene blue. Such a high enhancement factor achieved through enhanced charge interaction between target molecule and substrate suggests that with careful consideration of the layer‐number‐dependent feature and excitation‐energy‐related resonance effect, ReS₂ is a promising Raman enhancement platform for sensing applications.     

Wafer‐Scale Double‐Layer Stacked Au/Al2O3@Au Nanosphere Structure with Tunable Nanospacing for Surface‐Enhanced Raman Scattering

Fabricating perfect plasmonic nanostructures has been a major challenge in surface enhanced Raman scattering (SERS) research. Here, a double‐layer stacked Au/Al₂O₃@Au nanosphere structures is designed on the silicon wafer to bring high density, high intensity “hot spots” effect. A simply reproducible high‐throughput approach is shown to fabricate feasibly this plasmonic nanostructures by rapid thermal annealing (RTA) and atomic layer deposition process (ALD). The double‐layer stacked Au nanospheres construct a three‐dimensional plasmonic nanostructure with tunable nanospacing and high‐density nanojunctions between adjacent Au nanospheres by ultrathin Al₂O₃ isolation layer, producing highly strong plasmonic coupling so that the electromagnetic near‐field is greatly enhanced to obtain a highly uniform increase of SERS with an enhancement factor (EF) of over 10⁷. Both heterogeneous nanosphere group (Au/Al₂O₃@Ag) and pyramid‐shaped arrays structure substrate can help to increase the SERS signals further, with a EF of nearly 10⁹. These wafer‐scale, high density homo/hetero‐metal‐nanosphere arrays with tunable nanojunction between adjacent shell‐isolated nanospheres have significant implications for ultrasensitive Raman detection, molecular electronics, and nanophotonics.     

DNA‐Driven Two‐Layer Core–Satellite Gold Nanostructures for Ultrasensitive MicroRNA Detection in Living Cells

It is a significant challenge to achieve controllable self‐assembly of superstructures for biological applications in living cells. Here, a two‐layer core–satellite assembly is driven by a Y‐DNA, which is designed with three nucleotide chains that hybridized through complementary sequences. The two‐layer core–satellite nanostructure (C₃₀S₅S₁₀ NS) is constructed using 30 nm gold nanoparticles (Au NPs) as the core, 5 nm Au NPs as the first satellite layer, and 10 nm Au NPs as the second satellite layer, resulting in a very strong circular dichroism (CD) and surface‐enhanced Raman scattering. After optimization, the yield is up to 85%, and produces a g‐factor of 0.16 × 10^?2. The hybridization of the target microRNA (miRNA) with the molecular probe causes a significant drop in the CD and Raman signals, and this phenomenon is used to detect the miRNA in living cells. The CD signal has a good linear range of 0.011–20.94 amol ng_RNA^?1 and a limit of detection (LOD) of 0.0051 amol ng_RNA^?1, while Raman signal with the range of 0.052–34.98 amol ng_RNA^?1 and an LOD of 2.81 × 10^?2 amol ng_RNA^?1. This innovative dual‐signal method can be used to quantify biomolecules in living cells, opening the way for ultrasensitive, highly accurate, and reliable diagnoses of clinical diseases.     

Surface Plasmon‐Enhanced Photodetection in Few Layer MoS2 Phototransistors with Au Nanostructure Arrays

2D Molybdenum disulfide (MoS₂) is a promising candidate material for high‐speed and flexible optoelectronic devices, but only with low photoresponsivity. Here, a large enhancement of photocurrent response is obtained by coupling few‐layer MoS₂ with Au plasmonic nanostructure arrays. Au nanoparticles or nanoplates placed onto few‐layer MoS₂ surface can enhance the local optical field in the MoS₂ layer, due to the localized surface plasmon (LSP) resonance. After depositing 4 nm thick Au nanoparticles sparsely onto few‐layer MoS₂ phototransistors, a doubled increase in the photocurrent response is observed. The photocurrent of few‐layer MoS₂ phototransistors exhibits a threefold enhancement with periodic Au nanoarrays. The simulated optical field distribution confirms that light can be trapped and enhanced near the Au nanoplates. These findings offer an avenue for practical applications of high performance MoS₂‐based optoelectronic devices or systems in the future.     

Controlled Electrodeposition of Gold on Graphene: Maximization of the Defect‐Enhanced Raman Scattering Response

A reliable method to prepare a surface‐enhanced Raman scattering (SERS) active substrate is developed herein, by electrodeposition of gold nanoparticles (Au NPs) on defect‐engineered, large area chemical vapour deposition graphene (GR). A plasma treatment strategy is used in order to engineer the structural defects on the basal plane of large area single‐layer graphene. This defect‐engineered Au functionalized GR, offers reproducible SERS signals over the large area GR surface. The Raman data, along with X‐ray photoelectron spectroscopy and analysis of the water contact angle are used to rationalize the functionalization of the graphene layer. It is found that Au NPs functionalization of the “defect‐engineered” graphene substrates permits detection of concentrations as low as 10^?16 m for the probe molecule Rhodamine B, which offers an outstanding molecular sensing ability. Interestingly, a Raman signal enhancement of up to ≈10⁸ is achieved. Moreover, it is observed that GR effectively quenches the fluorescence background from the Au NPs and molecules due to the strong resonance energy transfer between Au NPs and GR. The results presented offer significant direction for the design and fabrication of ultra‐sensitive SERS platforms, and also open up possibilities for novel applications of defect engineered graphene in biosensors, catalysis, and optoelectronic devices.     

Improving All‐Inorganic Perovskite Photodetectors by Preferred Orientation and Plasmonic Effect

All‐inorganic perovskites have high carrier mobility, long carrier diffusion length, excellent visible light absorption, and well overlapping with localized surface plasmon resonance (LSPR) of noble metal nanocrystals (NCs). The high‐performance photodetectors can be constructed by means of the intrinsic outstanding photoelectric properties, especially plasma coupling. Here, for the first time, inorganic perovskite photodetectors are demonstrated with synergetic effect of preferred‐orientation film and plasmonic with both high performance and solution process virtues, evidenced by 238% plasmonic enhancement factor and 10⁶ on/off ratio. The CsPbBr₃ and Au NC inks are assembled into high‐quality films by centrifugal‐casting and spin‐coating, respectively, which lead to the low cost and solution‐processed photodetectors. The remarkable near‐field enhancement effect induced by the coupling between Au LSPR and CsPbBr₃ photogenerated carriers is revealed by finite‐difference time‐domain simulations. The photodetector exhibits a light on/off ratio of more than 10⁶ under 532 nm laser illumination of 4.65 mW cm^?2. The photocurrent increases from 0.67 to 2.77 μA with centrifugal‐casting. Moreover, the photocurrent rises from 245.6 to 831.1 μA with Au NCs plasma enhancement, leading to an enhancement factor of 238%, which is the most optimal report among the LSPR‐enhanced photodetectors, to the best of our knowledge. The results of this study suggest that all‐inorganic perovskites are promising semiconductors for high‐performance solution‐processed photodetectors, which can be further enhanced by Au plasmonic effect, and hence have huge potentials in optical communication, safety monitoring, and biological sensing.     

Ordered Arrangement and Optical Properties of Silica‐Stabilized Gold Nanoparticle–PNIPAM Core–Satellite Clusters for Sensitive Raman Detection

Gold–polymer hybrid nanoparticles attract wide interest as building blocks for the engineering of photonic materials and plasmonic (active) metamaterials with unique optical properties. In particular, the coupling of the localized surface plasmon resonances of individual metal nanostructures in the presence of nanometric gaps can generate highly enhanced and confined electromagnetic fields, which are frequently exploited for metal‐enhanced light–matter interactions. The optical properties of plasmonic structures can be tuned over a wide range of properties by means of their geometry and the size of the inserted nanoparticles as well as by the degree of order upon assembly into 1D, 2D, or 3D structures. Here, the synthesis of silica‐stabilized gold–poly(N‐isopropylacrylamide) (SiO₂‐Au‐PNIPAM) core–satellite superclusters with a narrow size distribution and their incorporation into ordered self‐organized 3D assemblies are reported. Significant alterations of the plasmon resonance are found for different assembled structures as well as strongly enhanced Raman signatures are observed. In a series of experiments, the origin of the highly enhanced signals can be assigned to the interlock areas of adjacent SiO₂‐Au‐PNIPAM core–satellite clusters and their application for highly sensitive nanoparticle‐enhanced Raman spectroscopy is demonstrated.     

Microlandscaping of Au Nanoparticles on Few‐Layer MoS2 Films for Chemical Sensing

Surface modification or decoration of ultrathin MoS₂ films with chemical moieties is appealing since nanointerfacing can functionalize MoS₂ films with bonus potentials. In this work, a facile and effective method for microlandscaping of Au nanoparticles (NPs) on few‐layer MoS₂ films is developed. This approach first employs a focused laser beam to premodify the MoS₂ films to achieve active surface domains with unbound sulfur. When the activated surface is subsequently immersed in AuCl₃ solution, Au NPs are found to preferentially decorate onto the modified regions. As a result, Au NPs can be selectively and locally anchored onto designated regions on the MoS₂ surface. With a scanning laser beam, microlandscapes comprising of Au NPs decorated on laser‐defined micropatterns are constructed. By varying the laser power, reaction time and thickness of the MoS₂ films, the size and density of the NPs can be controlled. The resulting hybrid materials are demonstrated as efficient Raman active surfaces for the detection of aromatic molecules with high sensitivity.     

Colloid‐Interface‐Assisted Laser Irradiation of Nanocrystals Superlattices to be Scalable Plasmonic Superstructures with Novel Activities

High‐efficient charge and energy transfer between nanocrystals (NCs) in a bottom‐up assembly are hard to achieve, resulting in an obstacle in application. Instead of the ligands exchange strategies, the advantage of a continuous laser is taken with optimal wavelength and power to irradiate the film‐scale NCs superlattices at solid–liquid interfaces. Owing to the Au‐based NCs' surface plasmon resonance (SPR) effect, the gentle laser irradiation leads the Au NCs or Au@CdS core/shell NCs to attach each other with controlled pattern at the interfaces between solid NCs phase and liquid ethanol/ethylene glycol. A continuous wave 532 nm laser (6.68–13.37 W cm^?2), to control Au‐based superlattices, is used to form the monolayer with uniformly reduced interparticle distance followed by welded superstructures. Considering the size effect to Au NCs' melting, when decreasing the Au NCs size to ≈5 nm, stronger welding nanostructures are obtained with diverse unprecedented shapes which cannot be achieved by normal colloidal synthesis. With the help of facile scale‐up and formation at solid–liquid interfaces, and a good connection of crystalline between NCs, the obtained plasmonic superstructured films that could be facilely transferred onto different substrates exhibit broad SPR absorption in the visible and near‐infrared regime, enhanced electric conductivities, and wide applications as surface enhanced Raman scattering (SERS)‐active substrates.     

Au Dotted Magnetic Network Nanostructure and Its Application for On‐Site Monitoring Femtomolar Level Pesticide

A novel magnetically responsive and surface‐enhanced Raman spectroscopy (SERS) active nanocomposite is designed and prepared by direct grafting of Au nanoparticles onto the surface of magnetic network nanostructure (MNN) with the help of a nontoxic and environmentally friendly reagent of inositol hexakisphosphate shortly named as IP₆. The presence of IP₆ as a stabilizer and a bridging agent could weave Fe₃O₄ nanoparticles (NPs) into magnetic network nanostructure, which is easily dotted with Au nanoparticles (Au NPs). It has been shown firstly that the huge Raman enhancement of Au‐MNN is reached by an external magnetic collection. Au‐MNN presenting the large surface and high detection sensitivity enables it to exhibit multifunctional applications involving sufficient adsorption of dissolved chemical species for enrichment, separation, as well as a Raman amplifier for the analysis of trace pesticide residues at femtomolar level by a portable Raman spectrometer. Therefore, such multifunctional nanocomposites can be developed as a smart and promising nanosystem that integrates SERS approach with an easy assay for concentration by an external magnet for the effective on‐site assessments of agricultural and environmental safety.     

Composition and Architecture Design of Double‐Shelled Co0.85Se1−xSx@Carbon/Graphene Hollow Polyhedron with Superior Alkali (Li,Na, K)‐Ion Storage

The exploration of materials with reversible and stable electrochemical performance is crucial in energy storage, which can (de) intercalate all the alkali‐metal ions (Li⁺, Na⁺, and K⁺). Although transition‐metal chalcogenides are investigated continually, the design and controllable preparation of hierarchical nanostructure and subtle composite withstable properties are still great challenges. Herein, component‐optimal Co_0.85Se_1?xS_x nanoparticles are fabricated by in situ sulfidization of metal organic framework, which are wrapped by the S‐doped graphene, constructing a hollow polyhedron framework with double carbon shells (CoSSe@C/G). Benefiting from the synergistic effect of composition regulation and architecture design by S‐substitution, the electrochemical kinetic is enhanced by the boosted electrochemistry‐active sites, and the volume variation is mitigated by the designed structure, resulting in the advanced alkali‐ion storage performance. Thus, it delivers an outstanding reversible capacity of 636.2 mAh g^?1 at 2 A g^?1 after 1400 cycles for Li‐ion batteries. Remarkably, satisfactory initial charge capacities of 548.1 and 532.9 mAh g^?1 at 0.1 A g^?1 can be obtained for Na‐ion and K‐ion batteries, respectively. The prominent performance combined with the theory calculation confirms that the synergistic strategy can improve the alkali‐ion transportation and structure stability, providing an instructive guide for designing high‐performance anode materials for universal alkali‐ion storage.     

Double‐Walled Au Nanocage/SiO2 Nanorattles: Integrating SERS Imaging,Drug Delivery and Photothermal Therapy

In this work, a novel type of nanomedical platform, the double‐walled Au nanocage/SiO₂ nanorattle, is successfully fabricated by combining two “hollow‐excavated strategies”—galvanic replacement and “surface‐protected etching”. The rational design of double‐walled nanostructure based on gold nanocages (AuNCs) and hollow SiO₂ shells functionalized respectively with p‐aminothiophenol (pATP) and Tat peptide simultaneously renders the nanoplatforms three functionalities: 1) the whole nanorattle serves as a high efficient drug carrier thanks to the structural characteristics of AuNC and SiO₂ shell with hollow interiors and porous walls; 2) the AuNC with large electromagnetic enhancement acts as a sensitive surface‐enhanced Raman scattering (SERS) substrate to track the internalization process of the nanorattles by human MCF‐7 breast cancer cells, as well as an efficient photothermal transducer for localized hyperthermia cancer therapy due to the strong near‐infrared absorption; 3) Tat‐functionalized SiO₂ shell not only improves biocompatibility and cell uptake efficiency resulting in enhanced anticancer efficacy but also prevents the AuNCs from aggregation and provides the stability of AuNCs so that the SERS signals can be used for cell tracking in high fidelity. The reported chemistry and the designed nanostructures should inspire more interesting nanostructures and applications.     

Dominance of Plasmonic Resonant Energy Transfer over Direct Electron Transfer in Substantially Enhanced Water Oxidation Activity of BiVO4 by Shape‐Controlled Au Nanoparticles

The performance of plasmonic Au nanostructure/metal oxide heterointerface shows great promise in enhancing photoactivity, due to its ability to confine light to the small volume inside the semiconductor and modify the interfacial electronic band structure. While the shape control of Au nanoparticles (NPs) is crucial for moderate bandgap semiconductors, because plasmonic resonance by interband excitations overlaps above the absorption edge of semiconductors, its critical role in water splitting is still not fully understood. Here, first, the plasmonic effects of shape‐controlled Au NPs on bismuth vanadate (BiVO₄) are studied, and a largely enhanced photoactivity of BiVO₄ is reported by introducing the octahedral Au NPs. The octahedral Au NP/BiVO₄ achieves 2.4 mA cm^?2 at the 1.23 V versus reversible hydrogen electrode, which is the threefold enhancement compared to BiVO₄. It is the highest value among the previously reported plasmonic Au NPs/BiVO₄. Improved photoactivity is attributed to the localized surface plasmon resonance; direct electron transfer (DET), plasmonic resonant energy transfer (PRET). The PRET can be stressed over DET when considering the moderate bandgap semiconductor. Enhanced water oxidation induced by the shape‐controlled Au NPs is applicable to moderate semiconductors, and shows a systematic study to explore new efficient plasmonic solar water splitting cells.     

A High‐Sensitivity and Low‐Power Theranostic Nanosystem for Cell SERS Imaging and Selectively Photothermal Therapy Using Anti‐EGFR‐Conjugated Reduced Graphene Oxide/Mesoporous Silica/AuNPs Nanosheets

A high‐sensitivity and low‐power theranostic nanosystem that combines with synergistic photothermal therapy and surface‐enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self‐assembly on the reduced graphene oxide (rGO) nanosheets with nanogap‐aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti‐epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS‐Au‐R6G enhances 5 × 10⁶ magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10^?8m R6G solution) due to the “hot spots” effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, in contrast to normal cells (MRC‐5). High photothermal therapy efficiency with a low power density (0.5 W cm^?2) of near‐infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.     

Ultrasensitive SERS Substrate Integrated with Uniform Subnanometer Scale “Hot Spots” Created by a Graphene Spacer for the Detection of Mercury Ions

Mercuric ion (Hg²⁺) is one of the most toxic and serious environment polluting heavy metal ions, which can be accumulated in human body through food chains and drinking water, and causes serious damage to human organs. Therefore, development of the efficient and sensitive method for detection of Hg²⁺ is very necessary. In this study, the high surface sensitivity and fingerprint information about the chemical structures based on surface‐enhanced Raman scattering (SERS) for sensing applications are taken advantage of. Au triangular nanoarrays/n‐layer graphene/Au nanoparticles sandwich structure with large‐area uniform subnanometer gaps are fabricated and used to detect Hg²⁺ in water via thymine–Hg²⁺–thymine coordination; the detection limit of Hg²⁺ is as low as 8.3 × 10^?9m . Moreover, this SERS substrate is used to detect the Hg²⁺‐contaminated sandy soil and shows excellent performance. This study indicates the sandwich structure has a great potential in detection of toxic metal ions and environmental pollutants.     

Volume‐Enhanced Raman Scattering Detection of Viruses

Virus detection and analysis are of critical importance in biological fields and medicine. Surface‐enhanced Raman scattering (SERS) has shown great promise in small molecule and even single molecule detection, and can provide fingerprint signals of molecules. Despite the powerful detection capabilities of SERS, the size discrepancy between the SERS “hot spots” (generally, <10 nm) and viruses (usually, sub‐100 nm) yields poor detection reliability of viruses. Inspired by the concept of molecular imprinting, a volume‐enhanced Raman scattering (VERS) substrate composed of hollow nanocones at the bottom of microbowls (HNCMB) is developed. The hollow nanocones of the resulting VERS substrates serve a twofold purpose: 1) extending the region of Raman signal enhancement from the nanocone surface (e.g., surface “hot spots”) to the hollow area within the cone (e.g., volume “hot spots”)—a novel method of Raman signal enhancement, and 2) directing analyte such as viruses of a wide range of sizes to those VERS “hot spots” while simultaneously increasing the surface area contributing to SERS. Using HNCMB VERS substrates, greatly improved Raman signals of single viruses are demonstrated, an achievement with important implications in disease diagnostics and monitoring, biomedical fields, as well as in clinical treatment.     

Abundant Ce3+ Ions in Au‐CeOx Nanosheets to Enhance CO2 Electroreduction Performance

The electroreduction of CO₂ to CO provides a potential way to solve the environmental problems caused by excess fossil fuel utilization. Loading transition metals on metal oxides is an efficient strategy for CO₂ electroreduction as well as for reducing metal usage. However, it needs a great potential to overcome the energy barrier to increase CO selectivity. This paper describes how 8.7 wt% gold nanoparticles (NPs) loaded on CeO_x nanosheets (NSs) with high Ce³⁺ concentration effectively decrease the overpotential for CO₂ electroreduction. The 3.6 nm gold NPs on CeO_x NSs containing 47.3% Ce³⁺ achieve CO faradaic efficiency of 90.1% at ?0.5 V in 0.1 m KHCO₃ solution. Furthermore, the CO₂ electroreduction activity shows a strong relationship with the fractions of Ce³⁺ on Au‐CeO_x NSs, which has never been reported. In situ surface‐enhanced infrared absorption spectroscopy shows that Au‐CeO_x NSs with high Ce³⁺ concentration promote CO₂ activation and *COOH formation. Theoretical calculations also indicate that the improved performance is attributed to the enhanced *COOH formation on Au‐CeO_x NSs with high Ce³⁺ fraction.     

Ultrathin Molybdenum Dioxide Nanosheets as Uniform and Reusable Surface‐Enhanced Raman Spectroscopy Substrates with High Sensitivity

Metal oxides have advantages over the traditional noble metals to be used as substrate materials for surface‐enhanced Raman spectroscopy (SERS) with low cost, versatility, and biocompatibility, but their enhancement factors are generally quite low with a poor limit of detection. Here, ultrathin molybdenum dioxide (MoO₂) nanosheets synthesized by chemical vapor deposition demonstrated in large area are used as SERS substrates with superior signal uniformity in the whole area with a limit of detectable concentration down to 4 × 10^?8m and enhancement factor up to 2.1 × 10⁵, exceeding that of 2D materials and comparable to that of noble metal films. More practically important, the planar MoO₂ substrate is more robust than noble metals and shows excellent reusability and uniformity, which is usually prohibited for nanostructured or nanoparticle‐based metal oxide substrates. The enhancement is mainly attributed to the surface plasmon resonance effect as evidenced by the first principle calculations and UV–vis absorption spectroscopy characterization, which can be further increased by decreasing the thickness of the MoO₂ nanosheets. The overall superior performance makes the MoO₂ nanosheets an ideal substrate for practical SERS applications.     

Multichannel Charge Transfer and Mechanistic Insight in Metal Decorated 2D–2D Bi2WO6–TiO2 Cascade with Enhanced Photocatalytic Performance

Promising semiconductor‐based photocatalysis toward achieving efficient solar‐to‐chemical energy conversion is an ideal strategy in response to the growing worldwide energy crisis, which however is often practically limited by the insufficient photoinduced charge‐carrier separation. Here, a rational cascade engineering of Au nanoparticles (NPs) decorated 2D/2D Bi₂WO₆–TiO₂ (B–T) binanosheets to foster the photocatalytic efficiency through the manipulated flow of multichannel‐enhanced charge‐carrier separation and transfer is reported. Mechanistic characterizations and control experiments, in combination with comparative studies over plasmonic Au/Ag NPs and nonplasmonic Pt NPs decorated 2D/2D B–T composites, together demonstrate the cooperative synergy effect of multiple charge‐carrier transfer channels in such binanosheets‐based ternary composites, including Z‐scheme charge transfer, “electron sink,” and surface plasmon resonance effect, which integratively leads to the boosted photocatalytic performance.     

Self‐Assembled Large Au Nanoparticle Arrays with Regular Hot Spots for SERS

The cost‐effective self‐assembly of 80 nm Au nanoparticles (NPs) into large‐domain, hexagonally close‐packed arrays for high‐sensitivity and high‐fidelity surface‐enhanced Raman spectroscopy (SERS) is demonstrated. These arrays exhibit specific optical resonances due to strong interparticle coupling, which are well reproduced by finite‐difference time‐domain (FDTD) simulations. The gaps between NPs form a regular lattice of hot spots that enable a large amplification of both photoluminescence and Raman signals. At smaller wavelengths the hot spots are extended away from the minimum‐gap positions, which allows SERS of larger analytes that do not fit into small gaps. Using CdSe quantum dots (QDs) a 3–5 times larger photoluminescence enhancement than previously reported is experimentally demonstrated and an unambiguous estimate of the electromagnetic SERS enhancement factor of ≈10⁴ is obtained by direct scanning electron microscopy imaging of QDs responsible for the Raman signal. Much stronger enhancement of ≈10⁸ is obtained at larger wavelengths for benzenethiol molecules penetrating the NP gaps.