载微球纳米羟基磷灰石/壳聚糖复合多孔支架的制备与表征

首先通过乳化法合成海藻酸钠/壳聚糖(ALG/CS)复合微球,然后将其与纳米羟基磷灰石/壳聚糖H(n-HA/CS)复合材料混合均匀,用气体发泡法制备了载微球复合组织工程支架.并用扫描电子显微镜(SEM)、傅立叶变换红外光谱仪(IR)以及转靶X射线仪(XRD)等方法对该载微球多孔支架进行分析和表征.结果表明:n-HA/CS复合材料中无机相均匀分散在连续有机基质中,复合前后两组分均未发生明显变化;制备的载微球多孔支架中孔隙分布均匀,孔间贯通性良好,孔隙率较高;而其中的微球均呈球状,直径分布在150～350μm之间;微球表面粗糙且有大量微孔,载药后将利于药物的释放;微球在整个支架中分布均匀,而且与n-HA/CS基体材料间亲和性较高.本研究将为骨或软骨缺损提供一种性能优良且具有药物缓释功能的组织工程支架.     

原位纳米羟基磷灰石/壳聚糖复合载药微球的制备及释放性能研究

为应对骨缺损修复过程中的细菌感染问题,利用原位法制备了具有药物缓释功能的纳米羟基磷灰石(n-HA)和壳聚糖(CS)复合微球,并与纯CS载药微球和共混法n-HA/CS复合载药微球进行对比研究。利用相差显微镜和扫描电镜对微球进行形貌观察,结果显示原位法复合载药微球表面形态和球形度均较好。对载药微球的载药率、药物包封率和体外药物释放进行了测试和分析,结果表明原位法复合载药微球载药率和药物包封率最高,分别为(0.3907±0.0203)%和(7.4221±0.3858)%,并具有明显的缓释效果。     

载药壳聚糖缓释微球的制备及其释放研究

实验采用乳化交联法,使用复合交联剂(先用甲醛交联,再用戊二醛交联),制得盐酸四环素壳聚糖缓释微球,并考察不同分子量的壳聚糖、原料质量比、交联剂用量、复合交联剂用量、搅拌速度对微球的影响,筛选出最佳条件制备出戢药微球,并研究了该微球在扫描电镜和倒置式研究型显微镜下的形态及其在pH=7.4,温度为37℃时的释放规律.结果表明,采用复合交联剂的乳化交联法所制得的微球球形好,粒径分布为5～50μm之间,载药量为26.9%,包封率为56.3%,并且具有良好的缓释效果.     

载异烟肼聚己内酯微球的制备及其性质研究

采用O/O溶剂挥发法制备载异烟肼聚己内酯微球。系统考察了活性剂浓度、内外油相体积、投药量对微球粒径、载药量和包封率的影响。结合内外油相初始粘度分析载药微球成球性,用IR、XRD、SEM对微球化学结构、结晶状态和表面形貌进行表征。通过优化得到平均粒径为28.73μm、载药量为2.36%、包封率为49.58%、外观圆整、表面多孔的载药微球。与O/W溶剂挥发法制备微球对比表明,O/O法有效地提高了载异烟肼聚己内酯微球载药量与包封率,是包覆亲水性小分子药物的可行方法,该载药微球可望用于骨和关节结核病的缓释治疗。     

氧化海藻酸钠交联壳聚糖载药复合体系的制备及其药物缓释初步研究

为获得一种新型的药物释放复合体系,本实验首先通过乳化交联法制备壳聚糖(CS)包载四环素(TC)微球,然后利用氧化海藻酸钠交联聚磷酸钙/壳聚糖(CPP/CS)复合材料,用冷冻干燥法制备了载药微球复合体系.并用傅立叶红外光谱仪(IR)、扫描电镜(SEM)及药物的体外释放等方法对该载药微球复合体系进行分析和表征.结果显示,经...     

注射型壳聚糖温敏相变复合材料的制备及性能研究

制备了一种注射型壳聚糖(CS)温敏相变复合材料,首先采用乳化-化学交联法,以戊二醛为交联剂,制备包载甲氨蝶呤(MTX)的壳聚糖微球,然后采用离子交联法,向CS溶液中滴加50%甘油磷酸钠溶液,制备CS温敏水凝胶。将CS载药微球分散于水凝胶中,制得温敏相变复合材料。结果表明,所制得的微球载药量为12.98%,包封率为32.66%,且粒径均一,分散性良好,具有良好的通针性;水凝胶在37℃下1min内可发生相变,由溶胶转变为凝胶,具有良好的温度敏感性;制备的温敏相变复合材料具有良好的原位注射性,且4h内药物释放率为35.65%,缓释效果明显。     

复合微球的合成及其缓释性能的研究

采用乳化-化学交联法,以壳聚糖为原料,戊二醛为交联剂,邻苯二甲酸二丁酯(DBP)为致孔剂,在乳化聚合条件下成功制备出多孔复合微球,拟将作为营养物质载体用于植物的根部吸收。通过单因素研究,得到了复合微球最佳致孔条件:壳聚糖溶液浓度为1.8%~2.0%(质量分数),O/W比例为5∶1,转速为900 r/min,乳化温度为45℃,DBP体积占O/W总体积比例为1∶7.5,浓度为50%(v/v)戊二醛体积占O/W总体积比例为1∶40。通过扫描电镜(SEM)对复合微球的形貌和结构进行分析;采用透射电镜(TEM)及element mapping检测含N、P、K复合肥成功包裹于壳聚糖微球中;利用元素分析,ICP(电感耦合等离子发射光谱)对复合微球的缓释性能进行测试与表征。研究结果表明,复合微球球形规整度良好;大部分微球直径在50μm左右;微球表面粗糙不平且有部分孔隙结构;微球释放规律符合希古契提出的Higuchi骨架模型,在132 h后释放逐渐趋于平稳,表明制备的复合微球具备良好的缓释效果。     

基于凝固浴剪切法制备多孔实心聚(乳酸-羟基乙酸)共聚物载药微球

以聚(乳酸-羟基乙酸)为基质材料,采用一种新颖的流动凝固浴剪切法制备包载盐酸万古霉素的载药微球,并研究微球的形貌结构、粒径、包封率、载药率、体外释放性能及其影响因素。结果表明,所制备的载药微球平均粒径在15~29μm范围,微球呈现内部实心表面多孔的复合结构;微球的包封率及载药可分别在15%~75%和1.5%~9.3%范围内调控。微球制备过程中的工艺条件对微球结构形貌、包封率、载药率及释放性能有重要影响,通过调整微球的粒径,可有效减缓释药过程中的突释现象。     

纳米羟基磷灰石/聚氨酯载药微球的制备及性能

通过乳液聚合法制备了负载阿莫西林的纳米羟基磷灰石/聚氨酯(n-HA/PU)载药微球,通过正交设计实验对其制备工艺进行了优化,采用红外光谱、热重分析、扫描电镜等分析了微球的结构和性能,对其体外药物缓释过程进行探讨。研究结果表明,复合微球粒径大小与固含量、聚乙烯吡咯烷酮(PVP)含量、搅拌速度等有关,所制备的微球平均粒径为0.8~1.2mm;载药微球的优化制备工艺条件为:原料配比-NCO∶-OH=2∶1,预聚时间180min,预聚温度80℃,nHA含量3%,固含量7%,搅拌速度600r/min,PVP用量3%,所制备微球的载药量为6.58%,包封率为86.86%。体外缓释结果表明,载药微球的释药行为符合Higuchi动力学,半衰期(t1/2)为22.29h,具有良好的药物缓释作用。     

壳聚糖固载阳离子环糊精微球的制备及载药性能

将β-环糊精、环氧氯丙烷和氯化胆碱经一步缩聚反应制得阳离子环糊精聚合物(CPβCD),采用反相悬浮法制备壳聚糖微球(CS),再以环氧氯丙烷为交联剂制备具有CPβCD和CS双重特性的壳聚糖固载阳离子环糊精聚合物微球(CS/CPβCD),用核磁共振(1H-NMR),红外光谱(FT-IR),扫描电镜(SEM)和X射线衍射(XRD)对产物进行表征,以酮洛芬为模型药物,研究了CS/CPβCD微球的载药性能。结果表明,CS/CPβCD微球对酮洛芬的最大载药量为849.4 mg/g,吸附规律符合Freundlich等温方程,载药CS/CPβCD微球具有缓释性能,并且在模拟肠液中的缓释效果优于模拟胃液,为CS/CPβCD作为药物缓释载体提供了依据。     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.     

Early ironwork in Biscay: Survey,excavation, experimentation and materials characterization. An integral study of the mountainside ironworks (ferrerías de monte or “haizeolak”)

ABSTRACT

The production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials.     

Mechanism Study on the Wear of CrAlTiN Coated High-Speed Steel Twist Drills Under Dry Cutting Conditions

As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.     

Study on Bond Ability of Arc-Spraying Coatings with Different Surface Pretreatment on Cast-Iron

Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting.     

Structural Characteristics of TiO2 Ceramic Coating by Micro-Plasma Oxidation

TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure.     

Evaluation of fatigue life of steel using steel grain size

The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase.