Additive Manufacturing of Composite Foam Metamaterial Springs for Vibration Isolation

This research introduces a novel approach for reducing the vibrations experienced by passengers in vehicles using metamaterials embedded in polyurethane foam to improve the existing vibration isolation capacity of car seats. An exploration of quasizero and negative stiffness metamaterials is conducted to develop metamaterial springs that exhibit a region of high-static and low-dynamic stiffness to achieve vibration isolation. Metamaterials are developed using low-cost open-source additive manufacturing methods and thermoplastic polyurethane filament. This investigation follows a process of determining the geometric, material, and systemic design requirements, to identify the quasizero and negative-stiffness force–displacement regions. Small-scale models of a car seat are developed by embedding the designed metamaterials into different grades of polyurethane foam and completing static and dynamic testing. The results demonstrate practical applications for implementing metamaterial springs into polyurethane foam to enhance vibration isolation under dynamic loading. The developed material library and the key geometric variables in the metamaterial design allow for application-specific solutions where the selection of the appropriate metamaterial and foam combination can be tailored to suit the system requirements.     

Designed ultrafast optical nonlinearity in a plasmonic nanorod metamaterial enhanced by nonlocality

All-optical signal processing enables modulation and transmission speeds not achievable using electronics alone. However, its practical applications are limited by the inherently weak nonlinear effects that govern photon-photon interactions in conventional materials, particularly at high switching rates. Here, we show that the recently discovered nonlocal optical behaviour of plasmonic nanorod metamaterials enables an enhanced, ultrafast, nonlinear optical response. We observe a large (80%) change of transmission through a subwavelength thick slab of metamaterial subjected to a low control light fluence of 7 mJ cm(-2), with switching frequencies in the terahertz range. We show that both the response time and the nonlinearity can be engineered by appropriate design of the metamaterial nanostructure. The use of nonlocality to enhance the nonlinear optical response of metamaterials, demonstrated here in plasmonic nanorod composites, could lead to ultrafast, low-power all-optical information processing in subwavelength-scale devices.     

An octave-bandwidth negligible-loss radiofrequency metamaterial

Metamaterials provide an unprecedented ability to manipulate electromagnetic waves and are an enabling technology for new devices ranging from flat lenses that focus light beyond the diffraction limit to coatings capable of cloaking an object. Nevertheless, narrow bandwidths and high intrinsic losses arising from the resonant properties of metamaterials have raised doubts about their usefulness. New design approaches seek to turn the perceived disadvantages of dispersion into assets that enhance a device's performance. Here we employ dispersion engineering of metamaterial properties to enable specific device performance over usable bandwidths. In particular, we design metamaterials that considerably improve conventional horn antennas over greater than an octave bandwidth with negligible loss and advance the state of the art in the process. Fabrication and measurement of a metahorn confirm its broadband, low-loss performance. This example illustrates the power of clever implementation combined with dispersion engineering to bring metamaterials into their full potential for revolutionizing practical devices.     

Active Metamaterials for Modulation and Detection

This paper illustrates some new concepts in the area of hybrid metamaterials, which are metamaterials that are embedded with active circuit elements such as transistors. Such transistor/metamaterial hybrids can exhibit some exotic electromagnetic properties which can be exploited for unusual and exciting functions. Two specific examples are provided. In one application, terahertz (THz) modulator based on embedding of psuedomorphic high electron mobility transistor (pHEMT) within the metamaterial resonator, all implemented monolithically in a commercial gallium arsenide (GaAs) technology is presented. In another application, a detector array based on metamaterial perfect absorber for room-temperature detection of gigahertz (GHz) radiation within each sub wavelength metamaterial unit cell is presented. The latter application utilizes a hybridization of metamaterial on printed circuit board (PCB) with discrete microwave electronic components. Both applications indicate the promise of the approach of integrating electronics or semiconductor devices with metamaterials for new and innovative functions.     

Negative refraction in semiconductor metamaterials

An optical metamaterial is a composite in which subwavelength features, rather than the constituent materials, control the macroscopic electromagnetic properties of the material. Recently, properly designed metamaterials have garnered much interest because of their unusual interaction with electromagnetic waves. Whereas nature seems to have limits on the type of materials that exist, newly invented metamaterials are not bound by such constraints. These newly accessible electromagnetic properties make these materials an excellent platform for demonstrating unusual optical phenomena and unique applications such as subwavelength imaging and planar lens design. 'Negative-index materials', as first proposed, required the permittivity, epsilon, and permeability, mu, to be simultaneously less than zero, but such materials face limitations. Here, we demonstrate a comparatively low-loss, three-dimensional, all-semiconductor metamaterial that exhibits negative refraction for all incidence angles in the long-wave infrared region and requires only an anisotropic dielectric function with a single resonance. Using reflection and transmission measurements and a comprehensive model of the material, we demonstrate that our material exhibits negative refraction. This is furthermore confirmed through a straightforward beam optics experiment. This work will influence future metamaterial designs and their incorporation into optical semiconductor devices.     

Magnetoelastic metamaterials

The study of advanced artificial electromagnetic materials, known as metamaterials, provides a link from material science to theoretical and applied electrodynamics, as well as to electrical engineering. Being initially intended mainly to achieve negative refraction, the concept of metamaterials quickly covered a much broader range of applications, from microwaves to optics and even acoustics. In particular, nonlinear metamaterials established a new research direction giving rise to fruitful ideas for tunable and active artificial materials. Here we introduce the concept of magnetoelastic metamaterials, where a new type of nonlinear response emerges from mutual interaction. This is achieved by providing a mechanical degree of freedom so that the electromagnetic interaction in the metamaterial lattice is coupled to elastic interaction. This enables the electromagnetically induced forces to change the metamaterial structure, dynamically tuning its effective properties. This concept leads to a new generation of metamaterials, and can be compared to such fundamental concepts of modern physics as optomechanics of photonic structures or magnetoelasticity in magnetic materials.     

Optimal electromechanical bandgaps in piezo-embedded mechanical metamaterials

Elastic mechanical metamaterials are the exemplar of periodic structures. These are artificially designed structures having idiosyncratic physical properties like negative mass and negative Young’s modulus in specific frequency ranges. These extreme physical properties are due to the spatial periodicity of mechanical unit cells, which exhibit local resonance. That is why scientists are researching the dynamics of these structures for decades. This unusual dynamic behavior is frequency contingent, which modulates wave propagation through these structures. Locally resonant units in the designed metamaterial facilitate bandgap formation virtually at any frequency for wavelengths much higher than the lattice length of a unit. Here, we analyze the band structure of piezo-embedded negative mass metamaterial using the generalized Bloch theorem. For a finite number of the metamaterial units coupled equation of motion of the system is deduced, considering purely resistive and shunted inductor energy harvesting circuits. Successively, the voltage and power produced by piezoelectric material along with transmissibility of the system are computed using the backward substitution method. The addition of the piezoelectric material at the resonating unit increases the complexity of the solution. The results elucidate, the insertion of the piezoelectric material in the resonating unit provides better tunability in the band structure for simultaneous energy harvesting and vibration attenuation. Non-dimensional analysis of the system gives physical parameters that govern the formation of mechanical and electromechanical bandgaps. Optimized numerical values of these system parameters are also found for maximum first attenuation bandwidth. Thus, broader bandgap generation enhances vibration attenuation, and energy harvesting can be simultaneously available, making these structures multifunctional. This exploration can be considered as a step towards the active elastic mechanical metamaterials design.

     

Gain and plasmon dynamics in active negative-index metamaterials

Photonic metamaterials allow for a range of exciting applications unattainable with ordinary dielectrics. However, the metallic nature of their meta-atoms may result in increased optical losses. Gain-enhanced metamaterials are a potential solution to this problem, but the conception of realistic, three-dimensional designs is a challenging task. Starting from fundamental electrodynamic and quantum mechanical equations, we establish and deploy a rigorous theoretical model for the spatial and temporal interaction of lightwaves with free and bound electrons inside and around metallic (nano-) structures and gain media. The derived numerical framework allows us to self-consistently study the dynamics and impact of the coherent plasmon-gain interaction, nonlinear saturation, field enhancement, radiative damping and spatial dispersion. Using numerical pump-probe experiments on a double-fishnet metamaterial structure with dye molecule inclusions, we investigate the build-up of the inversion profile and the formation of the plasmonic modes in a low-Q cavity. We find that full loss compensation occurs in a regime where the real part of the effective refractive index of the metamaterial becomes more negative compared to the passive case. Our results provide a deep insight into how internal processes affect the overall optical properties of active photonic metamaterials fostering new approaches to the design of practical, loss-compensated plasmonic nanostructures.     

Design, fabrication and characterization of indefinite metamaterials of nanowires

Indefinite optical properties, which are typically characterized by hyperbolic dispersion relations, have not been observed in naturally occurring materials, but can be realized through a metamaterial approach. We present here the design, fabrication and characterization of nanowire metamaterials with indefinite permittivity, in which all-angle negative refraction of light is observed. The bottom-up fabrication technique, which applies electrochemical plating of nanowires in porous alumina template, is developed and demonstrated in achieving uniform hyperbolic optical properties at a large scale. We developed techniques to improve the uniformity and to reduce the defect density in the sample. The non-magnetic design and the off-resonance operation of the nanowire metamaterials significantly reduce the energy loss of electromagnetic waves and make the broad-band negative refraction of light possible.     

Folding at the Microscale: Enabling Multifunctional 3D Origami‐Architected Metamaterials

Mechanical metamaterials inspired by the Japanese art of paper folding have gained considerable attention because of their potential to yield deployable and highly tunable assemblies. The inherent foldability of origami structures enlarges the material design space with remarkable properties such as auxeticity and high deformation recoverability and deployability, the latter being key in applications where spatial constraints are pivotal. This work integrates the results of the design, 3D direct laser writing fabrication, and in situ scanning electron microscopic mechanical characterization of microscale origami metamaterials, based on the multimodal assembly of Miura‐Ori tubes. The origami‐architected metamaterials, achieved by means of microfabrication, display remarkable mechanical properties: stiffness and Poisson’s ratio tunable anisotropy, large degree of shape recoverability, multistability, and even reversible auxeticity whereby the metamaterial switches Poisson’s ratio sign during deformation. The findings here reported underscore the scalable and multifunctional nature of origami designs, and pave the way toward harnessing the power of origami engineering at small scales.     

Tensile Properties of 3D-Projected 4-Polytopes: A New Class of Mechanical Metamaterial

In this article, we research the tensile behavior mechanical metamaterial based on the 3D projections of 4D geometries (4-polytopes). The specific properties of these mechanical metamaterials can be enhanced by more than fourfold when optimized within a framework powered by an evolutionary algorithm. We show that the best-performing metamaterial structure, the 8-cell (tesseract), has specific yield strength and specific stiffness values in a similar range to those of hexagonal honeycombs tested out-of-plane. The 8-cell structures are also cubically symmetrical and have the same mechanical properties in three orthogonal axes. The effect of structure is quantified by comparing metamaterial tensile strength against the Young's modulus of constituent solid material. We find that the strength-to-modulus value of the 8-cell structures exceeds that of the hexagonal honeycomb by 76%. The 5-cell (pentatope) and 16-cell (orthoplex) metamaterials are shown to be more effective under tensile loading than gyroid structures, while 24-cell (octaplex) structures display the least optimal structure-properties relationships. The findings presented in this paper showcase the importance of macro-scale architecture and highlight the potential of 3D projections of 4-polytopes as the basis for a new class of mechanical metamaterial.     

A review of additive manufacturing of metamaterials and developing trends

The concept of metamaterials originates from the proposal of left-hand materials with negative refractive index, followed by which, varieties of metamaterials with kinds of fantastic properties that cannot be found in natural materials, such as zero/negative Poisson’s ratio, electromagnetic/acoustic/thermal cloaking effect, etc., were come up with. According to their application fields, the metamaterials are roughly classified into four categories, electromagnetic metamaterials, acoustic metamaterials, thermal metamaterials, and mechanical metamaterials. By designing structures and arranging the distribution of materials with different physical parameters, the function of metamaterials can be realized in theory. Additive manufacturing (AM) technology provides a more direct and efficient way to achieve a sample of metamaterial and experiment verification due to the great advantages in fabricating complex structures. In this review, we introduce the typical metamaterials in different application situations and their design methods. In particular, we are focused on the fabrication of metamaterials and the application status of AM technology in them. Furthermore, we discuss the limits of present metamaterials in the aspect of design method and the disadvantages of existing AM technology, as well as the development tendency of metamaterials.     

Numerical study of two-dimensional metamaterial composites: the existence of a stop band

Two-dimensional metamaterial photonic crystals composed of dispersive left-handed materials and a right-handed medium were investigated. The existence of a stop band was studied by finite-difference time-domain calculations incorporated into an auxiliary differential equation (FDTD-ADE) method. The existence of a stop band was studied in the case of Drude-type dispersion responses for the dielectric permittivity and magnetic permeability of the metamaterial. A distinct stop band appears when the dispersive left-handed metamaterials are embedded in a positive-refractive-index medium and spatially isolated from each other. In contrast, the stop band is absent when the metamaterials span the entire photonic crystal.     

A d.c. magnetic metamaterial

Electromagnetic metamaterials are a class of materials that have been artificially structured on a subwavelength scale. They are currently the focus of a great deal of interest because they allow access to previously unrealizable properties such as a negative refractive index. Most metamaterial designs have so far been based on resonant elements, such as split rings, and research has concentrated on microwave frequencies and above. Here, we present the first experimental realization of a non-resonant metamaterial designed to operate at zero frequency. Our samples are based on a recently proposed template for an anisotropic magnetic metamaterial consisting of an array of superconducting plates. Magnetometry experiments show a strong, adjustable diamagnetic response when a field is applied perpendicular to the plates. We have calculated the corresponding effective permeability, which agrees well with theoretical predictions. Applications for this metamaterial may include non-intrusive screening of weak d.c. magnetic fields.     

Level set‐based topology optimization targeting dielectric resonator‐based composite right‐ and left‐handed transmission lines

In the last decade, metamaterials have been gaining attention and have been investigated because of their unique characteristics, which conventional materials do not have, such as negative refraction indexes. However, it is sometimes difficult to design metamaterials on the basis of experience and theoretical considerations because the relationship between their electromagnetic characteristics and structure is often vague. A mathematical structural design methodology targeting metamaterials may therefore be useful for expanding the engineering applications of metamaterials in industry. In this paper, a new level set‐based topology optimization method is proposed for designing composite right‐ and left‐handed transmission lines, each of which consists of a waveguide and periodically located dielectric resonators. Such transmission lines function as a fundamental metamaterial. In the proposed method, the shape and topology of the dielectric resonators are represented by the level set function, and topology optimization problems are formulated on the basis of the level set‐based representation. Copyright © 2011 John Wiley & Sons, Ltd.     

Reconfigurable photonic metamaterials

We introduce mechanically reconfigurable photonic metamaterials (RPMs) as a flexible platform for realizing metamaterial devices with reversible and large-range tunable characteristics in the optical part of the spectrum. Here we illustrate this concept for a temperature-driven RPM exhibiting reversible relative transmission changes of up to 50%.     

薄膜声学超材料降噪性能分析及设计

为了提升薄膜型声学超材料的隔声性能,首先采用模态叠加法和遗传优化算法实现一种反射型薄膜声学超材料单胞多参数结构优化设计;然后为了拓宽薄膜声学超材料单胞结构的隔声带宽,进一步提出一种能够实现低频宽带吸声的十字型薄膜声学超材料。结果表明:采用经过优化所得的反射型薄膜声学超材料可有效提高隔声带宽和离散频率的隔声量;并且十字型薄膜声学超材料单胞在510 Hz至820 Hz频带范围内平均吸声系数达到0.884,从而突破了薄膜声学超材料单胞仅在共振频率附近的窄带内具有优异吸声性能的限制。     

Electrically Controllable Molecularization of Terahertz Meta‐Atoms

Active control of metamaterial properties is critical for advanced terahertz (THz) applications. However, the tunability of THz properties, such as the resonance frequency and phase of the wave, remains challenging. Here, a new device design is provided for extensively tuning the resonance properties of THz metamaterials. Unlike previous approaches, the design is intended to control the electrical interconnections between the metallic unit structures of metamaterials. This strategy is referred to as the molecularization of the meta‐atoms and is accomplished by placing graphene bridges between the metallic unit structures whose conductivity is modulated by an electrolyte gating. Because of the scalable nature of the molecularization, the resonance frequency of the terahertz metamaterials can be tuned as a function of the number of meta‐atoms constituting a unit metamolecule. At the same time, the voltage‐controlled molecularization allows delicate control over the phase shift of the transmitted THz, without changing the high transmission of the materials significantly.     

Metasurfaces Atop Metamaterials: Surface Morphology Induces Linear Dichroism in Gyroid Optical Metamaterials

Optical metamaterials offer the tantalizing possibility of creating extraordinary optical properties through the careful design and arrangement of subwavelength structural units. Gyroid‐structured optical metamaterials possess a chiral, cubic, and triply periodic bulk morphology that exhibits a redshifted effective plasma frequency. They also exhibit a strong linear dichroism, the origin of which is not yet understood. Here, the interaction of light with gold gyroid optical metamaterials is studied and a strong correlation between the surface morphology and its linear dichroism is found. The termination of the gyroid surface breaks the cubic symmetry of the bulk lattice and gives rise to the observed wavelength‐ and polarization‐dependent reflection. The results show that light couples into both localized and propagating plasmon modes associated with anisotropic surface protrusions and the gaps between such protrusions. The localized surface modes give rise to the anisotropic optical response, creating the linear dichroism. Simulated reflection spectra are highly sensitive to minute details of these surface terminations, down to the nanometer level, and can be understood with analogy to the optical properties of a 2D anisotropic metasurface atop a 3D isotropic metamaterial. This pronounced sensitivity to the subwavelength surface morphology has significant consequences for both the design and application of optical metamaterials.     

声学超表面及其声波调控特性研究

声学超材料作为近年来研究的一个新兴领域,极大地拓宽了声学材料在各个领域的应用,声学超表面作为声学超材料的一个分支,近几年也受到了国内外研究者的广泛关注。声学超表面是一种由超材料结构单元阵列构成的基于亚波长尺寸的新型声学超材料,能够利用广义Snell定理实现对反射声波或透射声波的定向调控,具有利用亚波长厚度调控声波的独特优势。由于其具有结构简单、物理特性丰富独特、对声波灵活有效调控等特点,成为了超材料研究中的热点课题。从超表面的概念出发,以折叠空间型超表面、五模式超表面、非结构化超表面为基础,详细介绍了几种常见结构单元的设计方法,及其对声波调控的物理机制,实现诸如负折射、声聚焦及声非对称传输等功能。此外,简略探讨了声学超表面有待解决的问题,以期为后续研究提供参考。