Recent progress in bismuth-based high Curie temperature piezo-/ferroelectric perovskites for electromechanical transduction applications

Piezo-/ferroelectric materials with high Curie temperature (T_C) are widely needed in sensors, actuators and transducers which can be used for high-temperature (HT) electromechanical transduction applications. In recent years, remarkable progress has been made in bismuth-based piezo-/ferroelectric perovskite materials (BPPs). In this article, recent progress in high T_C BPPs is reviewed. This review starts with an introduction to HT piezoelectrics and their applications. A detailed survey is then carried out on bismuth-based perovskites (BPs) with high T_C. Material synthesis, doping effects and chemical modifications of the related solid solutions are examined. Based on this analysis, the structure–property relationship of these materials is established. In addition, recent developments of BPPs for HT electromechanical transduction applications are presented and evaluated. Lastly, some main existing issues are analyzed and their possible solutions are proposed. This article provides a comprehensive overview of the research and development of BPPs and offers some prospects towards making these materials a viable resource for the design and fabrication of electromechanical transducers with unique specifications, especially, high temperature, high frequency and high power, for a wide range of technological applications.     

Designing amorphous formulations of polyphenols with naringin by spray-drying for enhanced solubility and permeability

Naringin (NAR), a major flavanone (FVA) glycoside, is a component of food mainly obtained from grapefruit. We used NAR as a food additive to improve the solubility and permeability of hydrophobic polyphenols used as supplements in the food industry. The spray-dried particles (SDPs) of NAR alone show an amorphous state with a glass transition temperature (T_g) at 93.2 °C. SDPs of hydrophobic polyphenols, such as flavone (FVO), quercetin (QCT), naringenin (NRG), and resveratrol (RVT) were prepared by adding varying amounts of NAR. All SDPs of hydrophobic polyphenols with added NAR were in an amorphous state with a single T_g, but SDPs of hydrophobic polyphenols without added NAR showed diffraction peaks derived from each crystal. The SDPs with NAR could keep an amorphous state after storage at a high humidity condition for one month, except for SDPs of RVT/NAR. SDPs with NAR enhanced the solubility of hydrophobic polyphenols, especially NRG solubility, which was enhanced more than 9 times compared to NRG crystal. The enhanced solubility resulted in the increased membrane permeability of NRG. The antioxidant effect of the hydrophobic NRG was also enhanced by the synergetic effect of NAR. The findings demonstrated that NAR could be used as a food additive to enhance the solubility and membrane permeability of hydrophobic polyphenols.     

Metal-organic framework derived hexagonal layered cobalt oxides with {1 1 2} facets and rich oxygen vacancies: High efficiency catalysts for total oxidation of propane

A cobalt-based metal–organic framework was used as a precursor to synthesize Co₃O₄ catalysts exhibiting a hexagonal layered morphology by calcination at varying temperatures. Various characterization techniques, such as XRD, SEM, Raman, H₂-TPR, O₂-TPD and N₂ adsorption–desorption, were used to study the effects of calcination temperature on the grain size, surface area, and pore volume of the catalysts. The Co₃O₄ catalyst obtained by calcination at 350 °C (Co₃O₄-350) exhibited the highest catalytic activity for the total oxidation of propane. Furthermore, the small grain size and layered structure of Co₃O₄-350 allowed it to possess a high specific surface area, a highly exposed {1 1 2} facets, and abundant oxygen defects that facilitated a favorable low-temperature reducibility and oxygen mobility, thereby improving catalytic activity. This research offers a simple strategy for synthesis of Co₃O₄ with layered structure, highly exposed {1 1 2} facets and rich oxygen defects.     

3D HCN nanotexture with synergistic effect of nickel and hole scavengers for enhancing photocatalytic H2 production: Role of morphology and influential parameters

Well-designed three-dimensional (3D) nanotextures of graphitic carbon nitride (g-C₃N₄), synthesized using template free single step method and mediated with nickel as a noble free metal, for solar hydrogen production, has been investigated. The photoactivity was investigated in a slurry type continuous flow photoreactor system by using different influential parameters such as hole scavengers, diffusion effects, time, and mass transfer. Compared to bulk g-C₃N₄, H₂ yield was increased with 3D hierarchical carbon nitride (HCN) nanotexture. The H₂ evolution rate was reached to 1310 µmol g^?1 h^?1 with optimized 2 % Ni loading to 3D HCN. This H₂ evolution rate was 19.8 and 24.9 times higher than it was generated using 3D HCN and g-C₃N₄, respectively. The special interlayer opening, more light penetration and suppressed charge carrier recombination were the main contributors for this photoactivity enhancement. Among the different influential parameters, lower viscosity, higher number of protons and less diffusion effects were promising to give significantly higher H₂ production. The stability of nanotextures was entirely dependent on the attached reactants over the nickel reactive sites, which was more promising for Triethanolamine (TEOA) than using methanol. This newly developed low-cost 3D HCN can be promising in solar energy conversion and other energy applications.     

Heat absorption characteristics of gas in a solar fluidized bed receiver with carbon nanotubes

Carbon nanotubes (CNTs) have been proposed as new candidate particles to enhance the utilization efficiency of solar energy in solar fluidized bed receiver (SFBR) for solar air heating in low- and mid-temperature ranges. Heat absorption characteristics of the CNTs have been determined in a SFBR (50 mm i.d. X 150 mm high). Two types of experimental particles were used which consisted of multi-walled CNTs with different nanotube shapes, such as entangled CNTs (ENCNTs) and vertically aligned CNTs (VACNTs). The particle dynamics and heat absorption characteristics of CNTs were studied and compared with those of silicon carbide (SiC), a conventional particle. CNTs showed lower pressure fluctuation with relatively uniform particle behavior in the freeboard compared to SiC. The outlet gas temperatures of the receiver with CNTs were higher than those inside the fluidized bed above 0.10 m/s of gas velocity. The temperature increment of gas per irradiance (ΔT/I_DNI) decreased with increasing gas velocity. VACNTs, which are characterized by the coexistence of aggregates and nanotubes in the freeboard, showed a higher value of ΔT/I_DNI than ENCNTs for the same gas velocity. The relative heat absorption temperature (T*) decreased with increasing gas velocity, and dropped below 1.0 at the solid holdup of 0.04, indicating that the freeboard region’s contribution to the receiver’s heat absorption increased. VACNTs and ENCNTs showed maximum thermal efficiencies of 26.7 % and 30.5 % at gas velocities of 0.12 and 0.16 m/s, respectively, which was 33 % higher than that of SiC. Considering the particle properties and particle dynamics, the obtained thermal efficiencies in the present and previous studies were correlated with the Reynolds, Archimedes and Prandtl numbers and the ratios of the specific heat capacities of the particles to the gas.     

Synthesis,structure, and mechanical response of Cr0.26Fe0.24Al0.5 and Cr0.15Fe0.14Al0.30Cu0.13Si0.28 nanocrystallite entropy alloys

The present research work has concentrated to synthesize nanocrystalline (NC) Cr_0.26Fe_0.24Al_0.5 (medium entropy alloy, 3E-MEA) and Cr_0.15Fe_0.14Al_0.30Cu_0.13Si_0.28 (high-entropy alloy, 5E-HEA) non-equiatomic (equal weight fraction) alloys through mechanical alloying (MA); which studied the influence of entropy effect on structural properties, microstructural characterization, and mechanical behaviour. Further, the same non-equiatomic ratio of two coarse grain alloys (CGAs) was manufactured by conventional powder metallurgy (PM) route (blending method, 3E-CGA, 5E-CGA) for comparison. All synthesized powders were hot-pressed (HPed) at 723 k for 30 min subsequently mechanical properties in terms of compressive stress-strain and hardness were examined. The samples of as-milled powders, HPed, and fractured were investigated using X-ray diffraction (XRD) and advanced electron microscopes. The HPed sample of 3E-MEA of Cr_0.26Fe_0.24Al_0.5 produced 94% BCC and 6% FCC crystal structures due to more dissolution of Al atoms in the stronger bonding atoms of Cr-Fe lattice. Whereas 5E-HEA of Cr_0.15Fe_0.14Al_0.30Cu_0.13Si_0.28 sample has exhibited 72.1% FCC phase and 27.9% BCC phase due to balance between the dissolution of FCC elements (Al, Cu, Si) and BCC elements (Cr, Fe). Further, 3E-MEA and 5E-HEA have exhibited the ultimate compressive strength (UCS) of 1278 ± 6.75 MPa and 2060 ± 2.8 MPa respectively whereas the corresponding conventionally blended alloys produced 268 ± 5 MPa and 615 ± 3 MPa for 3E-CGA and 6E-CGA respectively. Vicker’s hardness strength (VHS) of 5E-HEA of Cr_0.15Fe_0.14Al_0.30Cu_0.13Si_0.28 has exhibited 68% more when compared to 3E-MEA of Cr_0.26Fe_0.24Al_0.5, 3.26 times higher compared to blended alloys. Further, several strengthening mechanisms on the mechanical behaviour of MEA and HEA were investigated in which dislocation strengthening mechanisms followed by solid solution strengthening mechanisms have influenced more as compared to grain boundary strengthening mechanisms.     

Recent breakthroughs and perspectives of high-energy layered oxide cathode materials for lithium ion batteries

Ni-rich layered oxides (NRLOs) and Li-rich layered oxides (LRLOs) have been considered as promising next-generation cathode materials for lithium ion batteries (LIBs) due to their high energy density, low cost, and environmental friendliness. However, these two layered oxides suffer from similar problems like capacity fading and different obstacles such as thermal runaway for NRLOs and voltage decay for LRLOs. Understanding the similarities and differences of their challenges and strategies at multiple scales plays a paramount role in the cathode development of advanced LIBs. Herein, we provide a comprehensive review of state-of-the-art progress made in NRLOs and LRLOs based on multi-scale insights into electrons/ions, crystals, particles, electrodes and cells. For NRLOs, issues like structure disorder, cracks, interfacial degradation and thermal runaway are elaborately discussed. Superexchange interaction and magnetic frustration are blamed for structure disorder while strains induced by universal structural collapse result in issues like cracks. For LRLOs, we present an overview of the origin of high capacity followed by local crystal structure, and the root of voltage hysteresis/decay, which are ascribed to reduced valence of transition metal ions, phase transformation, strains, and microstructure degradation. We then discuss failure mechanism in full cells with NRLO cathode and commercial challenges of LRLOs. Moreover, strategies to improve the performance of NRLOs and LRLOs from different scales such as ion-doping, microstructure designs, particle modifications, and electrode/electrolyte interface engineering are summarized. Dopants like Na, Mg and Zr, delicate gradient concentration design, coatings like spinel LiNi_0.5Mn_1.5O₄ or Li₃PO₄ and novel electrolyte formulas are highly desired. Developing single crystals for NRLOs and new crystallographic structure or heterostructure for LRLOs are also emphasized. Finally, remaining challenges and perspectives are outlined for the development of NRLOs and LRLOs. This review offers fundamental understanding and future perspectives towards high-performance cathodes for next-generation LIBs.     

Steel slag waste combined with melamine pyrophosphate as a flame retardant for rigid polyurethane foams

To explore the potential application of industrial waste, steel slag powder in combination with melamine pyrophosphate (MPP) was adopted to improve the flame retardancy of rigid polyurethane foam (RPUF). The incorporation of steel slag slightly reduced the thermal conductivity of the resulting flame-retardant RPUF samples. The addition of MPP and/or steel slag did not significantly alter the thermal stability in terms of T_-10% and T_max but did obviously increase the T_-50% value, suggesting the improved thermal resistance of the residues. The coaddition of MPP and steel slag into RPUF resulted in higher LOI values and lower peak heat release rates than the samples incorporating either MPP or steel slag alone. The superior flame retardancy could be attributed to MPP promoting char formation, which then acted as a barrier at the beginning of RPUF thermal decomposition; simultaneously, the thermally stable inorganics in the steel slag powder strengthened the thermal resistance of this char layer.     

Investigation of the molecular state of 4-aminosalicylic acid in matrix formulations for dry powder inhalers using solid-state fluorescence spectroscopy of 4-dimethylaminobenzonitrile

Carrier-free method is an alternative approach for dry powder inhaler (DPI) formulations, which overcome poor drug mobility and distribution. Here we investigated the properties of an active pharmaceutical ingredient (API) within composite particles. We used highly-branched cyclic dextrin (HBCD) as the excipient matrix that was prepared using a spray-drying technique. 4-Aminosalicylic acid (4-ASA) and 4-dimethylaminobenzonitrile (DMABN) were selected as a hydrophilic second-line antitubercular agent and a surrogate for 4-ASA as a model compound, respectively. The spray-dried particles (SDPs) containing 4-ASA or DMABN with HBCD had geometric median diameters (D₅₀) of 2.34 ± 0.07 μm and 2.26 ± 0.10 μm, respectively. Further, the in vitro aerodynamic properties were similar for SDPs containing 4-ASA and DMABN with HBCD. To determine the properties of APIs within composite particles, we performed solid-state fluorescence spectroscopy of DMABN. As a candidate excipient, hydroxypropyl methylcellulose (HPMC) was compared to HBCD. We determined the intensity ratio of twisted intramolecular charge transfer (TICT) emission to locally excited emission within the excipient matrix environment. The HBCD matrix environment was better than HPMC to trigger a more robust TICT reaction of DMABN. A potent state-changing interaction of APIs occurred in the HBCD matrix environment versus another excipient environment.     

Changes in the oxygen content,morphology, and microstructure of Mo-10Nb composite powders during mechanical alloying

The prefabrication of Mo-Nb composite powders is an effective way of improving the homogeneity of Mo-10Nb targets, which have broad application prospects in the photoelectric sensor industry. However, this aspect has been rarely addressed so far. Therefore, we prepared Mo-10Nb composite powders by mechanical alloying (MA), and investigated the effects of the experimental parameters such as the milling speed and duration on the particle morphology, size distribution, compositional homogeneity, crystallite size, inner strain, and oxygen content. High-quality Mo-10Nb composite powders with 3-μm spherical particles of narrow size distribution, homogeneous elemental distribution, and nanometric crystalline structure were obtained by implementing optimum MA parameters, viz., a milling speed of 250 rpm and duration of 36 h using an MITR QM-QX-4L omnidirectional ball mill. The mechanically alloyed Mo-10Nb composite powders were prone to oxidation when exposed to air, which led to a sharp increase in the oxygen content to ~5400 ppm. X-ray photoelectron spectroscopic analysis revealed the presence of Nb₂O₅, MoO₂, and MoO₃ on the surface of the Mo-10Nb particle. We believe that this study demonstrates an interesting strategy for the fabrication of high-quality Mo-10Nb targets.     

CFD modelling and simulation of an industrial scale continuous fluidized bed roaster

In the present work, computational fluid dynamics (CFD) based modelling of an industrial scale continuous fluidised bed roaster (FBR) has been carried out to study its performance at different operating conditions, so that the sulphide-sulphur content in the product is within 0.4% at the designed feed rate of 39.75 DMT/h. Eulerian-Eulerian multiphase model, considering four granular phases and one gas phase has been implemented to investigate the velocity and mass fraction profile of the particles in the FBR. The heat and species mass balance calculations have been performed external to CFD, by dividing the roaster into several sections. The conversion of ZnS to ZnO at various sections of the roaster has been estimated using reaction kinetics under isothermal condition (1203 K). The heat liberated and possible temperature rise at each section was predicted based on the heat of reaction and sensible heat of the solid and gaseous products. The CFD model was validated with the plant data for a feed rate of 36.5 DMT/h, air flow rate of 65,000 Nm³/h and O₂ content of 21%. The proposed model predicted the sulphide-sulphur content in the product to be 0.4% for the designed feed rate of 39.75 DMT/h, when the O₂ content in the inlet air was increased to 25%.     

Progress in solvent-free dry-film technology for batteries and supercapacitors

Solvent-free dry-film technology has attracted wide attention due to its ability to avoid pollution/waste caused by poisonous organic solvents, as well as its advantage for energy density enhancement, electrochemical performance improvement and electrode–electrolyte interface compatibility. However, a summary of the research advancements and technology development in this field is still missing. To fill this gap, a complete overview of the technical advantages, development process, principal mechanisms and application fields of solvent-free dry film technology is presented here. Firstly, the history of solvent-free dry-film technology is introduced, followed by detailed discussions on different types of dry-film making methods. Moreover, powder spray and binder fibrillation are emphasized as key methods due to their low-cost mass-production capability, with an elaboration on the associated preparation process including principle, procedure, and parameters. Both patents from the industry and research papers from the academy of the aforementioned two methods are analyzed/summarized for complete information, whose technical advantages are found to be suitable for all solid-state batteries (ASSBs). Based on the insights obtained above, perspectives are given for promoting future development of solvent-free dry-film technology.     

Improving hydrothermal performance of hybrid nanofluid in double tube heat exchanger using tapered wire coil turbulator

Tapered wire coil insert is proposed as a novel enhancer in the double tube heat exchanger and experimental studies on Al₂O₃ + MgO hybrid nanofluid flowing under the turbulent condition are performed to investigate the hydrothermal characteristics. Effects of using tapered wire coil turbulator and hybrid nanofluid on the hydrothermal behaviors are examined for different coil configurations (Converging (C) type, Diverging (D) type and Conversing-Diverging (C-D) type) and hybrid nanofluid inlet temperatures and volume flow rates. Results show that D-type wire coil insert promotes better hydrothermal performance as compared to C-type and C-D type. Nusselt number and friction factor of hybrid nanofluid using D-type, C-D type and C-type wire coil inserts enhance up to 84%, 71% and 47%, and 68%, 57% and 46%, respectively than that of water in tube without insert. The entropy generation of hybrid nanofluid is lower than that of base fluid in all cases. The thermal performance factor for hybrid nanofluid is found more than one with all inserts. The thermal performance factor is observed a maximum of 1.69 for D-type coil. The study reveals that the hybrid nanofluid and tapered wire coil combination is promising option for improving the hydrothermal characteristics of double pipe heat exchanger.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Granulation of ibuprofen/isonicotinamide co-crystals by continuous spray granulator (CTS-SGR)

The importance of granulation is paramount for tablet manufacturing, and is based on the fact that granulated powders are characterized by improved flowability, compressibility, segregation, and dust reduction. The aim of this study was to prepare and characterize continuous granules of high drug content by using a continuous-spray granulator (CTS-SGR). Ibuprofen (IBU), a drug of low-flowability, was selected as the model drug. As IBU has a low melting point and cannot easily granulate on its own, we employed isonicotinamide (INA) as a coformer that would allow us to prepare co-crystal granules containing 60 % IBU. The results of the undertaken differential scanning calorimetry and powder X-ray diffraction revealed that the IBU and the INA in the granules formed co-crystals. The granulation conditions affected the particle size and the yield of the granules; in fact, a low air supply temperature, a low atomizing air rate, and a high solution flow rate ensured a high granulation efficiency. Moreover, continuous granulation increased the yields of the formulations compared to those obtained through a short-run granulation, and high yields were obtained after applying a low atomizing air rate. The circularity of the granules exceeded 90 %, and their flowability improved when compared to that of the IBU bulk. The undertaking of dissolution studies revealed no change in the elution amount of IBU as a result of the co-crystallization. Our study shows that it is possible to produce high-content IBU granules in a direct and continuous manner through the co-crystallization of IBU and the use of a CTS-SGR.     

Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

Evaluation of particle recovery from microalgae

Coccoliths are micro-structured biomineral particles found in cell protective covering layers of coccolithophore species. They are mainly composed of CaCO₃ and their individual crystal entities are arranged in such a way that they construct complex and unique structures. This complexity is found down to the individual particle level and appears to have promising properties to offer. This study focuses on the essential step prior to any kind of implementation, which is the recovery of the material. It summarizes cleaning protocols found in literature, compares them for the first time for the same freshly cultivated material and addresses challenges that still need to be overcome. Further, it highlight the advantages and disadvantages of the best cleaning protocols, suggests optimizations with promising results and uses size distribution measurements to analyse the recovery efficiency. To that end, further characterization techniques, new for coccoliths, are introduced and used to improve our current knowledge of the particles behaviour.     

pH-responsive dual-functional hydrogel integrating localized delivery and anti-cancer activities for highly effective therapy in PDX of OSCC

As one of the most promising localized drug delivery systems for enhancing therapeutic efficacy and reducing systemic toxicity, supramolecular hydrogels self-assembled from natural products have recently attracted tremendous attention. However, the intricate drug loading process, limited drug entrapment efficacy, and lack of stimulus responsiveness considerably impede their potential for biological applications and raise the need for advanced hydrogel-based delivery systems. Therefore, the development of updated materials that integrate localized delivery and drug activity into a single system is extremely desired and has great potential to overcome the aforementioned shortcomings. In this study, a pH-responsive dual-functional isoG-based supramolecular hydrogel with both localized delivery and anti-cancer activity in one molecule is successfully developed in one pot by following a simple and green procedure. The isoguanosine-phenylboronic-guanosine (isoGPBG) hydrogel exhibits exceptional stability (more than one year), outstanding pH-responsiveness and excellent sustained release capability. Both in vitro and in vivo experiments demonstrate that the isoGPBG hydrogel not only shows acceptable biocompatibility and biodegradability but also significantly inhibit tumor growth (approximately 60% inhibition of tumor growth) and improve overall survival, especially in preclinical patient-derived xenograft (PDX) model of oral squamous cell carcinoma (OSCC). Therefore, the isoGPBG hydrogel, to the best of our knowledge, is the first example of pH-responsive dual-functional isoG-based supramolecular hydrogel integrating localized delivery and anti-cancer activity in one molecule. It is implied that the isoGPBG hydrogel could act as a smart dual-functional localized delivery system in the future for clinical cancer therapy.     

Screening of sugars and cyclodextrins as carriers in montelukast dry powder inhalers processed by spray freeze drying

The purpose of this study was to develop a site targeting montelukast sodium (MTK) microparticles as a respiratory drug delivery system using the spray freeze drying (SFD) process. A range of sugars and cyclodextrins (CDs) were screened as carrier in order to find compatible excipients for the preparation of dry powder inhalers (DPIs). The physical characteristics of collected powders were studied by scanning electron microscopy (SEM), laser light scattering, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The aerodynamic behavior of the particles was also assessed using twin stage impinge (TSI). In the presence of simple sugars as carriers, highly porous particles in irregular shapes were produced. The use of CDs resulted in the formation of spherical particles with high porosity. Among all carriers that were used during the preparation of powders, raffinose had the best aerodynamic behavior with a fine particle fraction (FPF) of 60 % in sugar groups, while the lowest FPF was related to trehalose as carrier. Powders containing CDs mostly showed proper aerodynamic behavior, especially in formulations containing alfa-cyclodextrin (A-CD), beta-cyclodextrin (β-CD), and highly branched cyclic dextrin (HBCD). Overall, data indicated that the CDs were excellent excipients for use with MTK for respiratory drug delivery.     

3D printing vertically: Direct ink writing free-standing pillar arrays

Over the last three decades, a variety of additive manufacturing techniques have gradually gained maturity and will potentially play an important role in future manufacturing industries. Among them, direct ink writing has attracted significant attention from both material and tissue engineering areas, where the colloidal ink is extruded and dispensed according to a pre-designed path, usually in the X-Y plane with suitable increments in the Z direction. Undoubtedly, this way of disassembling geometries, simple or complex, can facilitate most of the printing process. However, for one extreme case, i.e. pillar arrays, the size resolution can deviate from both nozzle and design if the common way of slicing and additive manufacturing is used. Therefore, a different printing path is required – directly depositing pillars in a converse gravitational direction. This paper gives multiple examples of printing viscoelastic colloidal ceramic and metal inks uniaxially and periodically into free-standing and height-adjustable pillar arrays. It is expected to inspire the additive manufacturing community that more versatile degrees of freedom and complex printing paths, not confined within only complex shapes, can be achieved by ink-based 3D printing.