新型的治疗阿尔茨海默氏症药物(1-二甲基磷酰基-2,2,2-三氯)-乙基-1-醇烟酸醋对体外神经细胞的作用

目的: 观察本实验室合成的一种治疗阿尔茨海默氏症(AD)的药物(1-二甲基磷酰基-2, 2, 2 -三氯)-乙基^-1-醇烟酸醋(NMF),对体外培养的皮层神经细胞活性的影响以及对海人藻酸(KA)所致的神经损伤的保护作用。方法: 采用体外培养皮层神经元的方法,解剖分离 15 d胚胎小鼠皮层神经细胞, 接种于 96孔板,48 h 后加药并培养 72 h,以 MIT 法 观察 NMF 对小鼠皮层神经细胞活性的影响;同时将接种于 24 孔板的细胞预先给予 NMF,d 3 时加或不加KA处理后,以台盼蓝染色鉴别并计数死、活细胞,可得出细胞的存活率。结果: NMF 明显促进胎鼠皮层神经元活性,其中 NMF1、0. 1、10nmol·L^-1促进神经元活性增殖率分别高达 34.7%、37.4%、36. 7%, NMF 明显促进正常胎鼠皮层神经元存活卒,与对照组比较,10nmol·L^-1 NMF 对皮层神经元的存活率分别提高 39.3%、73.5%。 NMF能显著 对抗 KA 所致的神经元损伤,与 KA 损伤组相比, NMF0.1、10、10nmol·L^-1对损伤皮层神经元的保护率分别为 77.30%、80.10%、84.15%。结论: NMF 明 显促进胎鼠皮层神经元的洁性、提高正常皮层神经元,的存活卒,并能有效地保护KA所致的神经元损伤,提示 NMF 是一种很有潜力的治疗 AD 的药物。     

Three-Dimensional Growth of Coherent Ferrite in Austenite: A Molecular Dynamics Study

Coherent second phase often exhibits anisotropic morphology with specifi c orientations with respect to both the second and the matrix phases. As a key feature of microstructure, the morphology of the coherent particles is essential for understanding the second-phase strengthening eff ect in various industrial alloys. This letter reports anisotropic growth of coherent ferrite from austenite matrix in pure iron based on molecular dynamics simulation. We found that the ferrite grain tends to grow into an elongated plate-like shape, independent of its initial confi guration. The fi nal shape of the ferrite is closely related to the misfi t between the two phases, with the longest direction and the broad facet of the plate being, respectively, consistent with the best matching direction and the best matching plane calculated via the Burgers vector content(BVC) method. The strain energy calculation in the framework of Eshelby's inclusion theory verifi es that the simulated orientation of the coherent ferrite is energetically favorable. It is anticipated that the BVC method will be applicable in analysis of anisotropic growth and morphology of coherent second phase in other phase transformation systems.     

Effect of Short-Time Aging on the Pitting Corrosion Behavior of a Novel Lean Duplex Stainless Steel 2002

The effect of short-time aging in the temperature range between 400 and 1000 °C on the pitting corrosion behavior and mechanical property of a novel lean duplex stainless steel(LDSS) 2002 was investigated through the potentiostatic critical pitting temperature(CPT) tests and the Charpy impact tests. Both the pitting corrosion resistance and the toughness of aged specimens degraded due to the precipitation of detrimental secondary phases and the most significant reduction of CPT and impact energy emerged at 650 °C concurrently. The CPT of LDSS 2002 specimen aged at 650 °C decreased by 28 °C, and the impact energy dropped from 69 to 29 J/cm~2 compared with the solution-annealed sample. Transmission electron microscopy characterization showed that the main precipitates in LDSS 2002 were Cr_2N and M_(23)C_6 along the ferrite–austenite grain boundaries.     

INTRODUCTION TO PATENTS

The invention provides a method of making a mold which can reduce SOx generation rate while preventing decrease in hardening rate in the case of using sulfuric acid for a hardener composition. The method has a mixture step in which fire-resistant particles, a hardener composition and a binder composition are mixed to obtain a composition for a mold. The hardener composition contains sulfuric acid. In the mixture step, sodium carbonate is added. A molar ratio of the sulfuric acid to the sodium carbonate is 0.5 or more and 4.0 or less.     

China Foundry Week 2014

China Foundry Week, hosted by the Foundry Institution of Chinese Mechanical Engineering Society （FICMES） each year, is a large academic event in China. It is one of the ten high-impact activities sponsored by the Chinese Mechanical Engineering Society.     

17th Conference of Hydrodynamic and Electromechanical Control Engineering Call for papers

正1.Contents In order to promote the academic exchanges and technical communication of the research in the field of fluid power transmission and control,fluid control engineering specialized committee of the Chinese Society of Theoretical and Applied Mechanics will hold the 17th Conference of Hydrodynamic and Electromechanical Control Engineering on July 27-29,2014 in Tibet,Lhasa city.     

Information for Contributors

正The Transactions of Nonferrous Metals Society of China,founded in 1991 and sponsored by The Nonferrous Metals Society of China,is published monthly now and mainly contains reports of original research which reflect the new progresses in the field of nonferrous metals science and technology,including mineral processing,extraction metallurgy,metallic materials and heat treatments,metal working,physical metallurgy,powder metallurgy,with the emphasis     

Preface

<正>We are pleased to present this Special Issue of Transactions of Nonferrous Metals Society of China containing selected papers from the First Asian Conference on Aluminum Alloys(ACAA-2013),held in Beijing,China,13–17 October 2013.This conference has been initiated,with approval of     

Information for Contributors

The Transactions of Nonferrous Metals Society of China, founded in 1991 and sponsored by The Nonferrous Metals Society of China, is published monthly now and mainly contains reports of original research which reflect the new progresses in the field of nonferrous metals science and technology, including mineral processing, extraction metallurgy, metallic materials and heat treatments, metal working, physical metallurgy, powder metallurgy, with the emphasis on fundamental science. It is the unique preeminent publication in English for scientists, engineers, under/post-graduates on the field of nonferrous metals industry. This journal is covered by many famous abstract/index systems and databases such as SCI Expanded, Ei Compendex Plus, 1NSPEC, CA, METADEX, AJ and JICST.     

Formulas of Tension of Continuous Rolling Process

The development of computer controlled continuous rolling process calls for a mathematical expression that can express the inequality condition of "constant flow". Tension is the link of the continuous rolling process. From the condition of dynamic equilibrium, a differential equation of tension is given out. On the basis of the physical rules established from the industrial practice and experimental studies, the law of volume constancy, the linear relation of forward slip and tension, the state equation of continuous rolling, the formula of dynamic tension, and the formula of static tension have been obtained. These formulae reflect the functional relations between tensions, thickness, roll velocity, and time in the continuous rolling process. It is implied that the continuous rolling process is a gradually steady, controllable, and measurable dynamic system. An assumption of predicting the thickness of a steel plate using these tension formulae is also put forward.     

A Concordant Shift Model for Flow in Bulk Metallic Glasses

The homogeneous plastic flow in bulk metallic glasses(BMGs) must be elucidated by an appropriate atomistic mechanism. It is proposed that a so-called concordant shifting model, based on rearrangements of five-atom subclusters,can describe the plastic strain behaviour of BMGs in a temperature range from room temperature to the supercooled liquid region. To confirm the effectiveness of the atomic concordant shifting model, a comparative investigation between the vacancy/atom model and the concordant shifting model is carried out based on the estimation of the strain rate deduced from two models. Our findings suggest that the atomic concordant shifting model rather than the vacancy/atom exchange model can well predict the large strain rate in the superplasticity of BMGs.     

Coupled Influence of Temperature and Strain Rate on Tensile Deformation Characteristics of Hot-Extruded AZ31 Magnesium Alloy

To explore the coupled effect of temperature T and strain rate_e on the deformation features of AZ31 Mg alloy,mechanical behaviors and microstructural evolutions as well as surface deformation and damage features were systematically examined under uniaxial tension at T spanning from 298 to 523 K and_e from 10-4to 10-2s-1. The increase in T or the decrease in_e leads to the marked decrease in flow stress, the appearance of a stress quasi-plateau after an initially rapid strain hardening, and even to the occurrence of successive strain softening. Correspondingly, the plastic deformation modes of AZ31 Mg alloy transform from the predominant twinning and a limited amount of dislocation slip into the enhanced non-basal slip and the dynamic recrystallization(DRX) together with the weakened twinning. Meanwhile, the cracking modes also change from along grain boundaries(GBs) and at twin boundaries(TBs) or the end of twins into nearby GBs where the DRX has occurred. The appearance of a stress quasi-plateau, the formation of large-sized cracks nearby GBs, and the occurrence of continuous strain softening, are intimately related to the enhancement of the non-basal slip and the DRX.     

Bulletin of the Awards in 2013

<正>Five reviewers and 9 published articles are selected as the Excellent Rewewerand Excellent Article in 2013 respectively.Excellent Reviewers:Prof.Z ongyi Ma(Institute of Metal Research,CAS,C hina);Prof.Y ongbo Xu(Institute of Metal Research,CAS,C hina);Prof.Guangping Zhang(Institute of Metal Research,C AS,C hina);Prof.Z hendui Cui(Tianjin University,China);     

An Overview of High-Performance Aircraft Structural Al Alloy-AA7085

AA7085 Al alloy is a new-generation,high-strength,quench-insensitive alloy that features in airframe applications such as massive bulkhead and wing spars structures in Airbus A380 and Joint Strike Fighter aircrafts.This alloy has a great potential in replacing currently used high-strength AA7 xxx alloys in many international and national military aircraft programs [Hawk,Su-30,Mi G series,light combat aircraft(Tejas),Hindustan turbo/jet trainer,light combat helicopter,advanced light helicopter,and fifth-generation fighter aircrafts].An effort has been made to highlight the processing,heat treatment,properties and applications of the AA7085 Al alloy from the existing literature on the AA7085 alloy.The potential applications of this alloy are presented and compared with the currently used AA7075 Al alloy.A typical process cycle involved in the manufacturing of wrought AA7085 alloy products is described in detail.Particularly,the precipitation mechanisms involved in the different temper conditions are critically reviewed with the supporting microstructures.The mechanical properties with a particular emphasis on tensile,fatigue,and fracture toughness properties are discussed in detail based on the analysis of experimental data.The effects of temper conditions on the stress corrosion cracking and exfoliation corrosion have also been reviewed critically.     

The Seepage Characteristics of Heterogeneous Body With Different Spreading Solution Modes and its Applications

As the dump was a typically heterogeneous body, the seepage was different with varied spreading solution modes. The phenomenon of lamination that occured in the site was simulated using three layers in an indoor experiment, and the seepage effect comparison experiment of the inside spreading solution model and the top spreading solution model have been carried out. In the inside spreading solution mode, the phreatic planar flew without infiltration and the parallel layer motion model was used to calculate the seepage coefficient and equivalent seepage coefficient of each state respectively. In the top spreading solution model, the phreatic planar flew with an even infiltration on the surface, and the vertical layer motion model was adopted to calculate the above coefficient. The results showed that the seepage coefficient of the inside model was larger than the top model in the heterogeneous body, The ratio of them was between 1.42 and 3.07. On the basis of these results, the following new technologies were discussed: installing a few small diameter mechanical pore sand piles with every lamination in the using dump; drilling some holes one-off in the unused dump. These two methods could changed the top spreading solution into the inside model, thus the seepage in the dump was improved.     

Precipitation Behavior of M2N in a High-Nitrogen Austenitic Stainless Steel During Isothermal Aging

The precipitation behavior of M2N and the microstructural evolution in a Cr-Mn austenitic stainless steel with a high nitrogen content of 0.43mass% during isothermal aging has been investigated using optical microscopy （ OM）, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM）. The aging treatments have led to the decomposition of nitrogen supersaturated austenitic matrix through discontinuous cellular precipitation. The precipitated cells comprise alternate lamellae of M2N precipitate and austenitic matrix. This kind of precipitate morphology is similar to that of pearlite. However, owing to the non-eutectoidic mechanism of the reaction, the growth characteristic of the cellular precipitates is different from that of pearlite in Fe-C binary alloys. M2N precipitate in the cell possesses a hexagonal crystal structure with the parameters a = 0.4752nm and c = 0.4429nm, and the orientation relationship between the M2V precipitates and austenite determined from the SADP is [01^-10]M2N//[101]γ, [2^-1^-10]M2N//[010]γ.     

Facile Hydrothermal Synthesis and Growth Kinetics of Fe-Based Magnetic Nanoparticles

The facile hydrothermal method was used to synthesize Fe3O4 nanoparticles with an average diameter of 11nm. The pure body-centered cubic (bcc)-Fe nanoparticles were prepared by reduction of Fe3O4 nanoparticles powder in H2 atmosphere. The structure, morphology and magnetic properties of the products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) and vibrating sample magnetometer (VSM). The results showed that the as-prepared Fe3O4 nanoparticles had a relatively homogeneous size. The particle diameters became bigger with the increase of reaction time. The growth kinetics of the Fe3O4 nanoparticles was also briefly discussed. The products exhibited superparamagnetic properties at room temperature and the specific saturation magnetization was dependent on the particle sizes.     

知母宁对慢性低O2高CO2大鼠肺小动脉结构型和诱导型NOS基因表达的影响

目的: 研究知母宁对慢性低O₂ 高CO₂ 大鼠肺小动脉结构型一氧化氮合酶(cNOS)和诱导型一氧化氮合酶(iNOS)基因表达的影响,进而了解其对肺动脉高压的防治机制。方法: 将SD大鼠分为正常对照组、低O₂ 高CO₂ 组、知母宁组。采用图像分析、免疫组化、组织原位杂交、酶动力学等方法,测定各组大鼠动脉血、肺组织NO含量、NOS活性、肺细小动脉iNOS、cNOS及其基因表达的变化。结果: (1)低O₂ 高CO₂ 组m PAP、RV/(LV+ S)显著高于其他组(P< 0.01),3组间mCAP比较差异无显著性;(2)血、肺组织匀浆NO含量低O₂ 高CO₂ 组显著低于正常对照组, 知母宁组显著高于低O₂ 高CO₂ 组(p <0.01); (3)低O₂ 高CO₂ 组血浆及肺组织匀浆cNOS活性显著低于正常对照组(P<0.01), iNOS活性均显著高于正常对照组(P<0.01);知母宁组大鼠血浆及肺组织匀浆cNOS活性均显著高于低O₂ 高CO₂组(P<0.01),血浆iNOS活性无明显差异,肺组织匀浆iNOS活性咯高于低O₂ 高CO₂ 组(P<0.05);(4)低O₂ 高CO₂ 组肺细小动脉iNOS及其mRNA表达显著高于正常对照组(P < 0.01), cNOS及其mRNA表达显著低于正常对照组(P<0.01),知母宁组大鼠肺细小动脉iNOS、cNOS及其mRNA表达均显著高于低O₂ 高CO₂ 组(P<0.01)。(5)光、电镜下低O₂ 高CO₂ 组肺血管结构重建,知母宁组肺血管结构重建明显减轻。结论: 知母宁能促进低O₂ 高CO₂ 大鼠肺小动脉iNOS及cNOS 基因表达,上调NO/NOS体系,使NO合成增多可能为其抑制慢性低O₂高CO₂、肺动脉高压和肺血管结构重建的作用的重要作用机制之一。     

Stress Analysis of the Aperture in Compound Pipeline by FEM

There is a cyclical aperture at a certain part of the fiberglass reinforced plastic compound pipeline with a stainless steel pipe as a liner, which becomes the weakness of the conduit. The field of stress and strain of the aperture was investigated using the nonliner finite element code Marc. The results of the finite element analysis showed that there were concentrations of stress and strain in the layer of stainless steel at the part of the pipeline where the aperture existed. The method to solve these problems was also discussed.     

Layer Thickness-Dependent Hardness and Strain Rate Sensitivity of Cu–Al/Al Nanostructured Multilayers

Cu–Al/Al nanostructured metallic multilayers with Al layer thickness hAlvarying from 5 to 100 nm were prepared, and their mechanical properties and deformation behaviors were studied by nanoindentation testing. The results showed that the hardness increased drastically with decreasing hAldown to about 20 nm, whereafter the hardness reached a plateau that approaches the hardness of the alloyed Cu–Al monolithic thin films. The strain rate sensitivity(SRS, m),however, decreased monotonically with reducing hAl. The layer thickness-dependent strengthening mechanisms were discussed, and it was revealed that the alloyed Cu–Al nanolayers dominated at hAlB 20 nm, while the crystalline Al nanolayers dominated at hAl[ 20 nm. The plastic deformation was mainly related to the ductile Al nanolayers, which was responsible for the monotonic evolution of SRS with hAl. In addition, the hAl-dependent hardness and SRS were quantitatively modeled in light of the strengthening mechanisms at different length scales.