共查询到20条相似文献,搜索用时 187 毫秒
1.
研究了家用微波炉磁控管碳化La2 O3 Mo阴极 ,参照碳化ThO2 W阴极磁控管的制作工艺 ,成功实现了La2 O3 Mo阴极的碳化以及碳化La2 O3 Mo阴极磁控管的去气、激活。碳化La2 O3 Mo阴极的微波能量输出功率为 5 0 0W ,而同类型的碳化ThO2 W阴极磁控管的额定微波能量输出为 90 0W。通过分析认为 ,碳化La2 O3 Mo阴极磁控管微波输出能量不足的主要原因在于碳化La2 O3 Mo阴极材料本身的电子发射能力不足。 相似文献
2.
6T51高频加热电子管用碳化La2O3—Mo阴极的研究 总被引:2,自引:1,他引:2
研究了应用于6T51发射管中的碳化La2O3-Mo阴极的制作工艺及电子发射性能,在碳化钍钨阴极的实践基础上,实现了La2O3-Mo阴极的碳化以及碳化La2O3-Mo阴极6T51管的去气和阴极激活。对比碳化钍钨阴极,分析了碳化La2O3-Mo阴极6T51管的发射能力,认为目前碳化La2O3-Mo阴极研究的发射量最高水平只达到钝钨阴极的下限值,还不具备取代碳化Th-W阴极的条件,由于碳化Th-W阴极6T51管设计时所选取的阴极发射能力富余量相当大,经过严格的去气,老练处理,碳化La2O3-Mo阴极基本上满足6T51测试的要求,但其发射稳定性不好,发射寿命也不容易掌握,论述了La元素消耗或碳化层消耗是两个影响碳化La2O3-Mo阴极发射稳定性的因素。 相似文献
3.
Chemical stability of La_2O_3 in La_2O_3-Mo cathode materials 总被引:1,自引:0,他引:1
1 INTRODUCTIONThO2 Wthermioniccathodesarestillwidelyusedinhigh powervacuumtubesforindustrialheat ing .ItiswellknownthattheradioactivityofThO2leadsproblemstoitsmanufactureandapplication .La2 O3 Mo ,oneoftheattractivealternatives,wasin ventedinthemidstof 1970s[1~ … 相似文献
4.
5.
中国有色金属学报 《中国有色金属学会会刊》1999,19(3)
The carbonized structures of
Mo-La2O3 cathode specimens have been investigated by means of FESEM
and XRD, respectively. The substructure of carbonized layer in the Mo-La2O3
cathode has been found for the first time. The results showed that the carbonized layer
with uniform Mo2C was helpful to emission, while the demixing carbonized layer
with a compact MoC outside layer was harmful to emission. The uniform Mo2C
layer consists of coarse particles with lots of grain boundary crevices as well as holes
arranging perpendicular to the wire axle and up to surface, which was beneficial to the
migration of activated rare-earth in activation and operating. 相似文献
6.
碳化La_2O_3-Mo阴极材料的高温XPS研究 总被引:2,自引:1,他引:1
采用高温 X射线光电子能谱 (XPS)对碳化 La2 O3- Mo阴极材料表面 La的价态进行了研究。结果表明 ,材料中的 La2 O3可以被 Mo2 C还原成单质 La。单质 La的结合能高于 La2 O3的结合能。从实验上证实单质 La3d5/2的结合能为 835.96e V,并首次给出单质 La3d3/2结合能实验数值为 852 .2 3e V。 相似文献
7.
利用溶胶-凝胶、氢气还原及热压工艺制备了纳米复合Mo-4La2O3(质量分数,%)阴极材料,其显微组织中La2O3粒径小于100 nm,而常规Mo-4La2O3阴极中La2O3粒径为200~300 nm。在真空击穿实验中发现La2O3粒径对于阴极电子发射性能有显著的影响,纳米复合阴极的电子发射能力远高于常规阴极的发射能力,其电子发射点遍布整个阴极表面,而常规阴极电子发射点只是集中在一小块区域。通过建立金属-半导体电子相互作用模型,计算并绘制了Mo及La2O3中电子隧穿几率随La2O3粒径变化的关系曲线,解释了纳米复合阴极电子发射能力强的原因。 相似文献
8.
从理论上计算了碳化Mo-La2O3热阴极材料在不同温度下活性物质镧元素的蒸发速度,分析了镧元素蒸发对材料热电子发射及其稳定性的影响.计算结果表明:当温度为1623~1700K时,阴极中镧的扩散速度大于阴极表面镧的蒸发速度,Mo-La2O3阴极表面单质La的生成和蒸发保持平衡,阴极发射稳定; 当工作温度超过1700K,阴极表面镧的蒸发速度超过扩散速度,发射电流逐渐减少.测试了Mo-La2O3阴极FU-6051电子管在不同温度时的发射性能,热力学理论计算结果较好地解析了实验结果. 相似文献
9.
La2O3-Gd2O3-Mo secondary emission material 总被引:3,自引:0,他引:3
A new kind of materials La2O3-Gd2O3-Mo has been produced by powder metallurgy method.The composition and microstructure of the material were studied by XRD and SEM.It shows that no chemical reaction takes place among La2O3,Gd2O3,Mo and the rare earth oxides exist along molybdenum grain boundaries and in the pores.The emission property measurement results of this material show that adding rare earth oxide into molybdenum can improve the secondary emission coefficient of the emitter,and the emission property depends on the activation temperature.After La2O3-Gd2O3-Mo was activated at 1360℃,the maximum secondary emission coefficient can be high to 2.62,which has exceeded that for practical uses(2.0). 相似文献
10.
研究了FU105大功率广播发射管用碳化镧钼阴极,参照碳化钍钨阴极FU105管的制备工艺,实现了镧钼阴极的碳化以及镧钼阴极FU105管的排气和老炼。通过镧铝阴极FU105管的性能测试,对碳化镧钼阴极的发射能力和稳定性进行了分析。结果认为:FU105管碳化镧钼阴极的发射能力可以达到碳化钍钨阴极的水平,但其稳定性还有待改进。 相似文献
11.
La0.8Sr0.2FeO3-δ is a new kind of cathode material for intermediate SOFC, but its electrochemical activity is relative poor for the lanthanum gallate based solid oxide fuel cell. In this paper, a novel composite cathode of La0.8Sr0.2FeO3-δ/La0.9 Sr0.1Ga0.8Mg0.2O3-δ was prepared on the LSGM electrolyte substrate by screen-printing method. The results of cathodic polarization measurements show that the overpotential decreases significantly when the composite cathode is used instead of the La0.8Sr0.2FeO3-δ single layer cathode. The cathodic overpotential of the composite La0.8Sr0.2FeO3-δ/La0.9Sr0.1Ga0.8 Mg0.2O3-δ cathode is 150 mV at the current density of 0.2 A·m-2 at 800 ℃, while the cathodic overpotential of the La0.8 Sr0.2 FeO3-δ single layer cathode is higher thaN260 mV at the same condition. The electrochemical impedance spectroscopy was employed to investigate the polarization resistance of the cathode. The polarization resistance of the composite cathode is 1.20 Ω·m2 in open circuit condition, while the value of the single La0.8 Sr0.2 FeO3-δ cathode is 1.235 Ω·m2. 相似文献
12.
THERMIONIC EMISSION OF CARBONIZED La-Mo CATHODE 总被引:4,自引:0,他引:4
Nie Zuoren Zhou Meiling Wang Jinshu Zhang Jiuxing Zuo Tieyong School of Materials Science Engineering Beijing Polytechnic University Beijing P. R. China 《中国有色金属学会会刊》1999,9(2)
1INTRODUCTIONThecathodeisthecorepartofelectronicdevicebecauseitservesastheelectronresourceanditsqualitydirectlyinfluencesthel... 相似文献
13.
14.
THERMODYNAMIC ANALYSIS OF Mo-La_2O_3 THERMIONIC CATHODE WIRE 总被引:6,自引:0,他引:6
THERMODYNAMICANALYSISOFMo-La_2O_3THERMIONICCATHODEWIRE¥ZhouMeiling;WangJinshu;ZhangJiuxing;NieZuoren;LiEr;ZuoTieyong(Departmen... 相似文献
15.
季凯 《稀有金属材料与工程》2015,44(12):3089-3093
通过间歇式熔盐电解技术制备一种高活性LaNi_(5-x)Al_x合金薄膜材料,采用热力学计算、循环伏安技术研究Ni阴极的去极化能力以及在氧化物熔盐电解体系中La、Al的共析出条件,采用扫描电镜和X射线衍射仪对合金薄膜材料表层的显微组织结构进行观察与分析。结果表明:采用间歇式脉冲电解可以将电沉积和扩散过程有效分离,在设计Na_3AlF_6 114g、Al_2O_3 1.2 g以及La_2O_3 4.8 g的熔盐体系中Ni阴极上首先析出Al,形成液态Al-Ni阴极,使稀土La_2O_3活度大大降低,发生去极化作用,实现La、Al共析出,进而制备出高活性、成分均匀的LaNi_(5-x)Al_x合金薄膜,其中x的值介于3.5~4之间。 相似文献
16.
Mo—La2O3烧结坯间隙杂质的研究 总被引:2,自引:0,他引:2
通过扫描电镜(SEM)、电子探针(EPMA)、X射线衍射(XRD)及俄歇电子能谱(AES)研究了Mo-La2O3烧结坯中的间隙杂质。结果表明:La2O3的加入提高了烧结睛坯的抗弯强度和韧性。间隙杂质不驻存在于Mo中,而且在La2O3粒子表面吸附,使晶界杂质浓度降低。 相似文献
17.
J.X. Zhang D.M. Liu Y. Q. Liu M.L. Zhou T. Y. Zuo 《金属学报(英文版)》2005,18(6):714-718
1. Introduction Mo-La2O3 materials is a newly-developed high temperature structural materials which is widely used in electronics, chemistry and metallurgy industry, but also a novel thermionic electron-emmision materials for powerful electron tubes to re… 相似文献
18.
通过扫描电镜 (SEM)、电子探针 (EPMA)、X射线衍射 (XRD)及俄歇电子能谱 (AES)研究了 Mo- La2 O3烧结坯中的间隙杂质。结果表明 :L a2 O3的加入提高了烧结钼坯的抗弯强度和韧性。间隙杂质不仅存在于 Mo中 ,而且在 La2 O3粒子表面吸附 ,使晶界杂质浓度降低。 相似文献
19.