Water management in alkaline anion exchange membrane fuel cell anode

Water management is an important issue for alkaline anion exchange membrane fuel cell (AAEMFC) due to its significant role in the energy conversion processes. In this study, a numerical model is developed to investigate the water transport in AAEMFC anode. The gas and liquid transport characteristics in the gas diffusion layer (GDL) and catalyst layer (CL) with different designs and under various operating conditions are discussed. The results show that the current density affects the liquid water distribution in anode most significantly, and the temperature is the second considerable factor. The stoichiometry ratio of the supplied reactant has insignificant effect on the liquid water transport in anode. The change of liquid water amount in anode with cathode relative humidity follows a similar trend with anode inlet relative humidity. Some numerical results are also explained with published experimental and modeling data with reasonable agreement.     

A pore network study on the role of micro-porous layer in control of liquid water distribution in gas diffusion layer

In proton exchange membrane fuel cell (PEMFC), a hydrophobic micro-porous layer (MPL) is usually placed between catalyst layer (CL) and gas diffusion layer (GDL) to reduce flooding. Recent experimental studies have demonstrated that liquid water saturation in GDL is drastically decreased in the presence of MPL. However, theoretical studies based on traditional continuum two-phase flow models suggest that MPL has no effect on liquid water distribution in GDL. In the present study, a pore network model with invasion percolation algorithm is developed and used to investigate the impacts of the presence of MPL on liquid water distribution in GDL from the viewpoint at the pore level. A uniform pressure and uniform flux boundary conditions are considered for liquid water entering the porous layer in PEMFC. The simulation results reveal that liquid water saturation in GDL is reduced in the presence of MPL, but the reduction depends on the condition of liquid water entering the porous layer in PEMFC.     

Characteristics of water transport through the membrane in direct methanol fuel cells operating with neat methanol

The water required for the methanol oxidation reaction in a direct methanol fuel cell (DMFC) operating with neat methanol can be supplied by diffusion from the cathode to the anode through the membrane. In this work, we present a method that allows the water transport rate through the membrane to be in-situ determined. With this method, the effects of the design parameters of the membrane electrode assembly (MEA) and operating conditions on the water transport through the membrane are investigated. The experimental data show that the water flux by diffusion from the cathode to the anode is higher than the opposite flow flux of water due to electro-osmotic drag (EOD) at a given current density, resulting in a net water transport from the cathode to the anode. The results also show that thinning the anode gas diffusion layer (GDL) and the membrane as well as thickening the cathode GDL can enhance the water transport flux from the cathode to the anode. However, a too thin anode GDL or a too thick cathode GDL will lower the cell performance due to the increases in the water concentration loss at the anode catalyst layer (CL) and the oxygen concentration loss at the cathode CL, respectively.     

Coupled continuum and condensation–evaporation pore network model of the cathode in polymer-electrolyte fuel cell

A model of the cathode side of a Proton Exchange Membrane Fuel Cell coupling the transfers in the GDL with the phenomena taking place in the cathode catalyst layer and the protonic transport in the membrane is presented. This model combines the efficiency of pore network models to simulate the liquid water formation in the fibrous substrate of the gas diffusion layer (GDL) and the simplicity of a continuum approach in the micro-porous layer (MPL). The model allows simulating the liquid pattern inside the cathode GDL taking into account condensation and evaporation phenomena under the assumption that the water produced by the electro-chemical reactions enters the MPL in vapor form from the catalyst layer. Results show the importance of the coupling between the transfers within the various layers, especially when liquid water forms as the result of condensation in the region of the GDL fibrous substrate located below the rib.     

Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell

Liquid water formation and transport were investigated by direct experimental visualization in an operational transparent single-serpentine PEM fuel cell. We examined the effectiveness of various gas diffusion layer (GDL) materials in removing water away from the cathode and through the flow field over a range of operating conditions. Complete polarization curves as well as time evolution studies after step changes in current draw were obtained with simultaneous liquid water visualization within the transparent cell. The level of cathode flow field flooding, under the same operating conditions and cell current, was recognized as a criterion for the water removal capacity of the GDL materials. When compared at the same current density (i.e. water production rate), higher amount of liquid water in the cathode channel indicated that water had been efficiently removed from the catalyst layer.

Visualization of the anode channel was used to investigate the influence of the microporous layer (MPL) on water transport. No liquid water was observed in the anode flow field unless cathode GDLs had an MPL. MPL on the cathode side creates a pressure barrier for water produced at the catalyst layer. Water is pushed across the membrane to the anode side, resulting in anode flow field flooding close to the H₂ exit.     

Pore network modeling of fibrous gas diffusion layers for polymer electrolyte membrane fuel cells

A pore network model of the gas diffusion layer (GDL) in a polymer electrolyte membrane fuel cell is developed and validated. The model idealizes the GDL as a regular cubic network of pore bodies and pore throats following respective size distributions. Geometric parameters of the pore network model are calibrated with respect to porosimetry and gas permeability measurements for two common GDL materials and the model is subsequently used to compute the pore-scale distribution of water and gas under drainage conditions using an invasion percolation algorithm. From this information, the relative permeability of water and gas and the effective gas diffusivity are computed as functions of water saturation using resistor-network theory. Comparison of the model predictions with those obtained from constitutive relationships commonly used in current PEMFC models indicates that the latter may significantly overestimate the gas phase transport properties. Alternative relationships are suggested that better match the pore network model results. The pore network model is also used to calculate the limiting current in a PEMFC under operating conditions for which transport through the GDL dominates mass transfer resistance. The results suggest that a dry GDL does not limit the performance of a PEMFC, but it may become a significant source of concentration polarization as the GDL becomes increasingly saturated with water.     

Water transport characteristics in the gas diffusion media of proton exchange membrane fuel cell - Role of the microporous layer

Water transport through the gas diffusion media of a proton exchange membrane fuel cell (PEMFC) was investigated with a focus on the role of the microporous layer (MPL) coated on the cathode gas diffusion layer (GDL). The capillary pressure of the MPL and GDL, which plays a significant role in water transport, is derived as a function of liquid saturation using a pore size distribution (PSD) model. PSD functions are derived with parameters that are determined by fitting to the measured total PSD data. Computed relations between capillary pressure and liquid saturation for a GDL and a double-layered GDL (GDL + MPL) show good agreement with the experimental data and proposed empirical functions. To investigate the role of the MPL, the relationship between the water withdrawal pressure and liquid saturation are derived for a double-layered GDL. Water transport rates and cell voltages were obtained for various feed gas humidity using a two-dimensional cell model, and are compared with the experimental results. The calculated results for the net drag with application of the capillary pressure derived from the PSD model show good agreement with the experimental values. Furthermore, the results show that the effect of the MPL on the cell output voltage is significant in the range of high humidity operation.     

Parameter sensitivity examination for a complete three-dimensional,two-phase,non-isothermal model of polymer electrolyte membrane fuel cell

Parameter sensitivity analysis is carried out for a complete three-dimensional, two-phase, non-isothermal model of polymer electrolyte membrane (PEM) fuel cell with a parallel flow field design. The model couples the two-phase flow of the multi-component reactants and liquid water, species transport, electrochemical reactions, proton and electron transport, and the electro-osmosis transport, back diffusion of water in the membrane, and energy transport. Twenty nine parameters, which are classified into the structural or transport parameters of porous layers (tortuosity, porosity, permeability, proton conductivity, electron conductivity, and thermal conductivity) as well as the electrochemical parameters (anodic and cathodic exchange current densities, anodic and cathodic transfer coefficients for anode and cathode reactions), are used to implement individual parameter investigation. The results show the parameters can be divided in to strongly sensitive, conditional sensitive and weak sensitive parameters according to its effect on the cell polarization curve. The optimization of parameters of cathode gas diffusion layer (GDL) and catalyst layer (CL) is more important to improve cell performance than that of anode GDL and CL because liquid water transport and removal affect significantly membrane hydration and reactant transport. Electrochemical parameters determine the activation potential and the slope of ohmic polarization hence these parameters can be used to fit experimental polarization curve more effectively than the other parameters.     

Quantification and characterization of water coverage in PEMFC gas channels using simultaneous anode and cathode visualization and image processing

A new technique is presented to characterize and quantify the two-phase flow in the anode and cathode flow field channels using simultaneous anode and cathode visualization combined with image processing. In situ visualization experiments were performed at 35 °C with stoichiometric ratios (an/ca) of 1.5/2.5, 1.5/5, 3/8 to elucidate two-phase flow dynamics at lower temperature/low power conditions, when excess liquid water in the cell can be especially prevalent. Video processing algorithms were developed to automatically detect and quantify dynamic and static liquid water present in the flow field channels, as well as discern the distribution of water among different two-phase flow structures. The water coverage ratio was introduced as a parameter to capture the time-averaged flow field water content information through recorded high speed video sequences. The automated processing allows for efficient and robust spatial and temporal averaging of steady state channel water over very large visualization data sets acquired through high speed imaging. The developed algorithm calculates the water coverage ratio using the liquid water in the channels which is contacting the GDL surface, and selectively removes the superficial condensation on the visualization window from the coverage area. The water coverage ratio and distribution metrics techniques were demonstrated by comparing the performance of Freudenberg and Toray gas diffusion layers (GDLs) from a water management perspective, including direct anode to cathode comparisons of simultaneous water coverage data for each GDL sample. The anode water coverage ratio was found to exceed the cathode for both GDL samples at most operating conditions tested in this work. The Freudenberg GDL consistently demonstrated a higher water coverage ratio in the flow field gas channels than the Toray GDL, while the Toray GDL indicated a propensity for greater water retention within the membrane electrode assembly (MEA) based on performance, high frequency resistance (HFR), and water coverage metrics.     

Numerical study of the effect of the GDL structure on water crossover in a direct methanol fuel cell

A two-dimensional two-phase non-isothermal mass transport model is developed to numerically investigate the behavior of water transport through the membrane electrode assembly (MEA) of a direct methanol fuel cell. The model enables the visualization of the distribution of the liquid saturation through the MEA and the analysis of the distinct effects of the three water transport mechanisms: diffusion, convection and electro-osmotic drag, on the water-crossover flux through the membrane. A parametric study is then performed to examine the effects of the structure design of the gas diffusion layer (GDL) on water crossover. The results indicate that the flow-channel rib coverage on the GDL surface and the deformation of the GDL can cause an uneven distribution of the water-crossover flux along the in-plane direction, especially at higher current densities. It is also found that both the contact angle and the permeability of the cathode GDL can significantly influence the water-crossover flux. The water-crossover flux can be reduced by improving the hydrophobicity of the cathode GDL.     

Modeling the phenomena of dehydration and flooding of a polymer electrolyte membrane fuel cell

A one-dimensional, two-phase, transient PEM fuel cell model including gas diffusion layer, cathode catalyst layer and membrane is developed. The electrode is assumed to consist of a network of dispersed Pt/C forming spherically shaped agglomerated zones that are filled with electrolyte. Water is modeled in all three phases: vapor, liquid and dissolved in the ionomer to capture the effect of dehydration of the ionomer as well as flooding of the porous media. The anode is modeled as a sophisticated spatially reduced interface. Motivated by environmental scanning electron microscope (ESEM) images of contact angles for microscopic water droplets on fibers of the gas diffusion layer, we introduce the feature of immobile saturation. A step change of the saturation between the catalyst layer and the gas diffusion layer is modeled based on the assumption of a continuous capillary pressure at the interface. The model is validated against voltammetry experiments under various humidification conditions which all show hysteresis effects in the mass transport limited region. The transient saturation profiles clearly show that insufficient liquid water removal causes pore flooding, which is responsible for the oxygen mass transport limitation at high current density values. The simulated and measured current responses from chronoamperometry experiments are compared and analyzed.     

Anode water removal and cathode gas diffusion layer flooding in a proton exchange membrane fuel cell

Anode water removal (AWR) is studied as a diagnostic tool to assess cathode gas diffusion layer (GDL) flooding in PEM fuel cells. This method uses a dry hydrogen stream to remove product water from the cathode, showing ideal fuel cell performance in the absence of GDL mass transfer limitations related to water. When cathode GDL flooding is limiting, the cell voltage increases as the hydrogen stoichiometry is increased. Several cathode GDLs were studied to determine the effect of microporous layer (MPL) and PTFE coating. The largest voltage gains occur with the use of cathode GDLs without an MPL since these GDLs are prone to higher liquid water saturation. Multiple GDLs are studied on the cathode side to exacerbate GDL flooding conditions to further confirm the mechanism of the AWR process. Increased temperature and lower cathode RH allow for greater overall water removal so the voltage improvement occurs faster, though this leads to quicker membrane dehydration.     

Quantitative visualization of temporal water evolution in an operating polymer electrolyte fuel cell

Synchrotron X-ray radiography is employed to visualize the temporal evolution of water inside the gas diffusion layer (GDL) of an operating (in situ) polymer electrolyte fuel cell (PEFC). A single-cell PEFC test kit is specially designed for the convenient capture of X-ray images. X-ray images of water in the PEFC components, such as the polymer membrane, GDL, and end plate, are captured consecutively. The synchrotron X-ray radiography of high-spatial and high-temporal resolution is suitable for observing the transport of a liquid layer and for visualizing water distribution inside the PEFC. As a result, the spatial distribution of water in the PEFC components is clearly and quantitatively visualized. The temporal evolution of water in the anode GDL due to back diffusion effect is clearly observed by adopting the image normalization method. The water-saturation characteristics at the cathode GDL, including saturation time and speed, are quite different from those at the anode GDL.     

A three-dimensional two-phase flow model for a liquid-fed direct methanol fuel cell

A three-dimensional, two-phase, multi-component model has been developed for a liquid-fed DMFC. The modeling domain consists of the membrane, two catalyst layers, two diffusion layers, and two channels. Both liquid and gas phases are considered in the entire anode, including the channel, the diffusion layer and the catalyst layer; while at the cathode, two phases are considered in the gas diffusion layer and the catalyst layer but only single gas phase is considered in the channels. For electrochemical kinetics, the Tafel equation incorporating the effects of two phases is used at both the cathode and anode sides. At the anode side the presence of gas phase reduces the active catalyst areas, while at the cathode side the presence of liquid water reduces the active catalyst areas. The mixed potential effects due to methanol crossover are also included in the model. The results from the two-phase flow mode fit the experimental results better than those from the single-phase model. The modeling results show that the single-phase models over-predict methanol crossover. The modeling results also show that the porosity of the anode diffusion layer plays an important role in the DMFC performance. With low diffusion layer porosity, the produced carbon dioxide cannot be removed effectively from the catalyst layer, thus reducing the active catalyst area as well as blocking methanol from reaching the reaction zone. A similar effect exits in the cathode for the liquid water.     

Determination of effective water vapor diffusion coefficient in pemfc gas diffusion layers

The primary removal of product water in proton exchange membrane (PEM) fuel cells is through the cathode gas diffusion layer (GDL) which necessitates the understanding of vapor and liquid transport of water through porous media. In this investigation, the effect of microporous layer (MPL) coatings, GDL thickness, and polytetrafluorethylene (PTFE) loading on the effective water vapor diffusion coefficient is studied. MRC Grafil, SGL Sigracet, and Toray TGP-H GDL samples are tested experimentally with and without MPL coatings and varying PTFE loadings. A dynamic diffusion test cell is developed to produce a water vapor concentration gradient across the GDL and induce diffusion mass transfer. Tests are conducted at ambient temperature and flow rates of 500, 625, and 750 sccm. MPL coatings and increasing levels of PTFE content introduce significant resistance to diffusion while thickness has negligible effects.     

Influences of assembly pressure and flow channel size on performances of proton exchange membrane fuel cells based on a multi-model

In this work, assembly pressure and flow channel size on proton exchange membrane fuel cell performance are optimized by means of a multi-model. Based on stress-strain data of the SGL-22BB GDL obtained from its initial compression experiments, Young's modulus with different ranges of assembly pressure fits well through modeling. A mechanical model is established to analyze influences of assembly pressure on various gas diffusion layer parameters. Moreover, a CFD calculation model with different assembly pressures, channel width, and channel depth are established to calculate PEMFC performances. Furthermore, a BP neural network model is utilized to explore optimal combination of assembly pressure, channel width and channel depth. Finally, the CFD model is used to validate effect of size optimization on PEMFC performance. Results indicate that gap change of GDL below bipolar ribs is more remarkable than that below channels under action of the assembly pressure, making liquid water easily transported under high porosity, which is conducive to liquid water to the channels, reduces the accumulation of liquid water under the ribs, and enhances water removal in the PEMFC. Affected by the assembly force, change of GDL porosity affects its diffusion rate, permeability and other parameters, which is not conducive to mass transfer in GDL. Optimizing the depth and different dimensions through width of the flow field can effectively compensate for this effect. Therefore, the PEMFC performance can be enhanced through the comprehensive optimization of the assembly force, flow channel width and flow channel depth. The optimal parameter is obtained when assembly pressure, channel width and channel depth are set as 0.6 MPa, 0.8 mm, and 0.8 mm, respectively. The parameter optimization enhances the mass transfer, impedance, and electrochemical characteristics of PEMFC. Besides, it effectively enhances the quality transfer efficiency inside GDL, prevents flooding, and reduces concentration loss and ohmic loss.     

Effect of capillary pressure on liquid water removal in the cathode gas diffusion layer of a polymer electrolyte fuel cell

In order to investigate the effect of capillary pressure on the transport of liquid water in the cathode gas diffusion layer (GDL) of a polymer electrolyte fuel cell, a one-dimensional steady-state mathematical model was developed, including the effect of temperature on the capillary pressure. Numerical results indicate that the liquid water saturation significantly increases with increases in the operating temperature of the fuel cell. An elevated operating temperature has an undesirable influence on the removal of liquid water inside the GDL. A reported peculiar phenomenon in which the flooding of the fuel cell under a high operating temperature and an over-saturated environment is more serious in a GDL combined with a micro-porous layer (MPL) than in a GDL without an MPL [Lim and Wang, Electrochim. Acta 49 (2004), 4149–4156] is explained based on the present analysis.     

Liquid and oxygen transport through bilayer gas diffusion materials of proton exchange membrane fuel cells

In proton exchange membrane fuel cells (PEMFCs), a hydrophobic micro-porous layer (MPL) is usually placed between the catalyst layer (CL) and the conventional gas diffusion layer (GDL) to relieve the flooding. In this paper, a pore network model is developed to investigate how the MPL structure affects the liquid and oxygen transport properties of the bilayer gas diffusion material (GDM) consisting of fine MPL and coarse GDL. The regular three-dimensional pore network constructed to represent the bilayer GDM are composed of the cubic pores that are connected by the narrow throats of square cross section. Based on this model, the capillary pressure, liquid permeability, and oxygen effective diffusivity as a function of GDM liquid saturation are determined. Parameter studies are performed to elucidate the influences of MPL thickness and of MPL crack width. Also analyzed are the liquid distributions in different structural GDMs at the moment of breakthrough. The results reveal a liquid saturation jump at the MPL/GDL interface in the plain bilayer GDM, but a liquid saturation drop in the defective bilayer GDM.     

A droplet size dependent multiphase mixture model for two phase flow in PEMFCs

A droplet size dependent multiphase mixture model is developed in this paper, and the droplet size in the gas channel can be considered as a parameter in this multiphase mixture model, which includes the effect of gas diffusion layer (GDL) properties and the gas drag function and cannot be considered in the commonly used multiphase mixture model in the references. The three-dimensional two phase and non-isothermal simulation of the PEMFCs with a straight flow field is performed. The effect of droplet size on the liquid remove, the effect of liquid water on the heat transfer and the effect of gas flow pattern on the heat and mass transfer are mainly investigated. The simulation results show that the large droplet is hard to be dragged by the gas, so it produces large water saturation. The results of the heat transfer show that the liquid water hinders the heat transfer in the GDL and catalyst layer, so it produces the large relative high temperature area, and there are large temperature difference and water saturation in the PEMFCs operated with coflow pattern compared with counter flow pattern.     

Numerical study for in-plane gradient effects of cathode gas diffusion layer on PEMFC under low humidity condition

A numerical study about in-plane porosity and contact angle gradient effects of cathode gas diffusion layer (GDL) on polymer electrolyte membrane fuel cell (PEMFC) under low humidity condition below 50% relative humidity is performed in this work. Firstly, a numerical model for a fuel cell is developed, which considers mass transfer, electrochemical reaction, and water saturation in cathode GDL. For water saturation in cathode GDL, porosity and contact angle of GDL are also considered in developing the model. Secondly, current density distribution in PEMFC with uniform cathode GDL is scrutinized to design the gradient cathode GDL. Finally, current density distributions in PEMFC with gradient cathode GDL and uniform cathode GDL are compared. At the gas inlet side, the current density is higher in GDL with a gradient than GDL with high porosity and large contact angle. At the outlet side, the current density is higher in GDL with a gradient than GDL with low porosity and small contact angle. As a result, gradient cathode GDL increases the maximum power by 9% than GDL with low porosity and small contact angle. Moreover, gradient cathode GDL uniformizes the current density distribution by 4% than GDL with high porosity and large contact angle.