Continuous biogenic hydrogen production from dilute acid pretreated algal hydrolysate using hybrid immobilized mixed consortia

This study investigated the bioconversion of dilute acid (2% H₂SO₄) pretreated red algae (Gelidium amansii) hydrolysate into H₂ by anaerobic fermentation in a continuous stirred tank reactor under mesophilic conditions using hybrid immobilized cells as microbial catalyst. Two different hydraulic retention times (HRT) of 24 h and 16 h with a feed concentration of 15 g/L hexose equivalent have been investigated over 85 days of operation to evaluate H₂ production performance and stability of the continuous system. The highest hydrogen production rate (HPR) and hydrogen yield (HY) of 2.7 L/L/d and 1.3 mol/mol substrate hexose_added was achieved at 24 h HRT, while further operation at 16 h HRT led to a significant drop in the hydrogen production with a HPR and HY values of 1.8 L/L/d and 0.7 mol/mol substrate hexose_added, respectively. The bacterial community analysis characterized by 454 pyrosequencing revealed that the changes in HRT significantly influence the composition of the dominant microflora. At longer HRT (24 h), the phyla Firmicutes was abundant over 98%, whereas at shorter HRT (16 h), Proteobacteria being the dominant populations with 84%. These outcomes suggested that controlling appropriate HRT is prerequisite for efficient hydrogen production.     

Influence of C/P and C/N ratios and microbial characterization in hydrogen and ethanol production in an anaerobic fluidized bed reactor

The aim of this study was to evaluate the influence of C/P and C/N ratios on the production of hydrogen and ethanol in four anaerobic fluidized bed reactors: R1 (C/N = 100), R2 (C/N = 150), R3 (C/N = 200), and R4 (C/N = 250). The hydraulic retention time (HRT) was maintained at 2 h, and the C/P ratios varied from 300 to 1100. Reactors were filled with grounded tire and fed with synthetic substrate containing glucose (5000 mg L^?1). The effluent pH was around 3.7. The highest values for hydrogen yield (HY) and hydrogen production rate (HPR) were obtained at a C/P = 700 ratio in all reactors. The best performance was achieved at R3 (C/N = 200): HY of 0.76 mol H₂ mol^?1 glucose and HPR of 0.70 L h^?1 L^?1. The highest value for ethanol yield was obtained at C/P = 700 in R1 (1.5 mol EtOH mol^?1 glucose). Ethanol- and hydrogen-producing fermenters, such as Ethanoligenens sp. and Clostridium sp. were identified by molecular analysis. Lactobacillus sp. was also identified in this study.     

Continuous hydrogen production from cofermentation of sugarcane vinasse and cheese whey in a thermophilic anaerobic fluidized bed reactor

The co-fermentation of vinasse and cheese whey (CW) was evaluated in this study by using two thermophilic (55° C) anaerobic fluidized bed reactors (AFBRs). In AFBR using vinasse and CW (AFBR-V-CW), the CW was added in increasing proportions (2, 4, 6, 8, and 10 g COD.L^?1) to vinasse (10 g COD.L^?1) to assess the advantage of adding CW to vinasse. By decreasing the hydraulic retention time (HRT) from 8 h to 1 h in AFBR-V, maximum hydrogen yield (HY), production rate (HPR), and H₂ content (H₂%) of 1.01 ± 0.06 mmol H₂.g COD^?1, 2.54 ± 0.39 L H₂.d^?1.L^?1, and 47.3 ± 2.9%, respectively, were observed at an HRT of 6 h. The increase in CW concentration to values over 2 g COD.L^?1 in AFBR-V-CW decreased the HY, PVH, and H₂%, with observed maximum values of 0.82 ± 0.07 mmol H₂.g COD^?1, 1.41 ± 0.24 L H₂.d^?1.L^?1, and 55.5 ± 3.7%, respectively, at an HRT of 8 h. The comparison of AFBR-V-CW and AFBR-V showed that the co-fermentation of vinasse with 2 g COD.L^?1 of CW increased the HPR, H₂%, and HY by 117%, 68%, and 82%, respectively.     

Converting waste molasses liquor into biohydrogen via dark fermentation using a continuous bioreactor

This study investigated the effects of substrate concentration, HRT (hydraulic retention time), and pre-treatment of the substrate molasses on biohydrogen production from waste molasses (condensed molasses fermentation solubles, CMS) with a CSTR (continuously-stirred tank reactor). First, the hydrogen production was performed with various CMS concentrations (40–90 g COD/L, total sugar 8.7–22.6 g/L) with 6 h HRT. The results show that the maximal hydrogen production rate (HPR) occurred at 80 g COD/L substrate (19.8 g ToSu/L, ToSu: Total Sugar), obtaining an HPR of 0.417 mol/L/d. However, maximum hydrogen yield (HY) of 1.44 mol H₂/mol hexose and overall hydrogen production efficiency (HPE) of 25.6% were achieved with a CMS concentration of 70 g COD/L (17.3 g ToSu/L). The substrate inhibition occurred when CMS concentration was increased to 90 g COD/L (22.6 g ToSu/L). Furthermore, it was observed that the optimal HPR, HY, and HPE all occurred at HRT 6 h. Operating at a lower HRT of 4 h decreased the hydrogen production performance because of lower substrate utilization efficiency. The employment of pre-heating treatment (60 °C for 1 h) of the substrate could markedly enhance the fermentation performance. With 6 h HRT and substrate pre-heating treatment, the HPE raised to 29.9%, which is 18% higher than that obtained without thermal pretreatment.     

Biohydrogen production from diluted-acid hydrolysate of rice straw in a continuous anaerobic packed bed biofilm reactor

Bio-hydrogen production in a continuously operated anaerobic packed bed biofilm reactor (APBR) using acid-hydrolysate of rice straw as feedstock and inoculated with an anaerobic mesophilic sludge from a municipal wastewater treatment plant was investigated at three different HRTs (17, 8.2 and 2 h). Fermentable sugars solution achieved from a two-stage diluted acid hydrolysis of rice straw was used as the feedstock. First, rice straw was treated with 1% w v^?1 sulfuric acid at 120 °C for 30 min with a yield of 58.5% xylose. Higher temperature of 180 °C for 10 min at 0.5% w v^?1 sulfuric acid was applied in the second stage in which cellulosic crystalline structure was partially depolymerized to glucose with a yield of 19.3% glucose. Hydrogen production rate and yield were enhanced as the hydraulic retention time was decreased with a maximum production rate of 252 mL L^?1 h^?1 and yield of 1 mol H₂ mol^?1 sugar consumed at 2 h HRT. Experimental results illustrated the increase of COD conversion from 44% to 47% by shortening the HRT from 17 to 2 h. Furthermore, acetic acid and butyric acid production were reduced slower than other soluble metabolites like ethanol.     

Non-sterile bio-hydrogen fermentation from food waste in a continuous stirred tank reactor (CSTR): Performance and population analysis

Bio-hydrogen production from food waste by anaerobic mixed cultures was conducted in a continuous stirred tank reactor (CSTR). The hydraulic retention time (HRT) was optimized in order to maximize hydrogen yield (HY) and hydrogen production rate (HPR). The maximum hydrogen content (38.6%), HPR (379 mL H₂/L. d) and HY (261 mL H₂/g-VS_added) were achieved at the optimum HRT of 60 h. The major soluble metabolite products were butyric and acetic acids which indicated a butyrate-acetate type fermentation. Operation of CSTR at HRT 60 h could select hydrogen producing bacteria and eliminate lactic acid bacteria and acetogenic bacteria. The microbial community analyzed by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) revealed that the predominant hydrogen producer was Clostridium sp.     

Start-up study of biohydrogen production from palm oil mill effluent in a lab-scale up-flow anaerobic sludge blanket fixed-film reactor

A start-up study of lab-scale up-flow anaerobic sludge blanket fixed-film reactor (UASFF) was conducted to produce biohydrogen from palm oil mill effluent (POME). The reactor was fed with POME at different hydraulic retention time (HRT) and organic loading rate (OLR) to obtain the optimum fermentation time for maximum hydrogen yield (HY). The results showed the HY, volumetric hydrogen production rate (VHPR), and COD removal of 0.5–1.1 L H₂/g COD_consumed, 1.98–4.1 L H₂ L^?1 day^?1, and 33.4–38.5%, respectively. The characteristic study on POME particles was analyzed by particle size distribution (PSD), Scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDX). The microbial Shannon and Simpson diversity indices and Principal Component Analysis assessed the alpha and beta diversity, respectively. The results indicated the change of bacterial community diversity over the operation, in which Clostridium sensu stricto 1 and Lactobacillus species were contributed to hydrogen fermentation.     

Biohydrogen production from crude glycerol by immobilized Klebsiella sp. TR17 in a UASB reactor and bacterial quantification under non-sterile conditions

Biohydrogen production from crude glycerol by immobilized Klebsiella sp. TR17 was investigated in an up-flow anaerobic sludge blanket (UASB) reactor. The reactor was operated under non-sterile conditions at 40^○C and initial pH 8.0 at different hydraulic retention times (HRTs) (2–12 h) and glycerol concentrations (10–30 g/L). Decreasing the HRT led to an increase in hydrogen production rate (HPR) and hydrogen yield (HY). The highest HPR of 242.15 mmol H₂/L/d and HY of 44.27 mmol H₂/g glycerol consumed were achieved at 4 h HRT and glycerol concentrations of 30 and 10 g/L, respectively. The main soluble metabolite was 1,3-propanediol, which implies that Klebsiella sp. was dominant among other microorganisms. Fluorescence in situ hybridization (FISH) revealed that the microbial community was dominated by Klebsiella sp. with 56.96, 59.45, and 63.47% of total DAPI binding cells, at glycerol concentrations of 10, 20, and 30 g/L, respectively.     

Selection of metabolic pathways for continuous hydrogen production under thermophilic and mesophilic temperature conditions in anaerobic fluidized bed reactors

This study evaluated the influence of hydraulic retention time (HRT) on hydrogen (H₂) production in anaerobic fluidized bed reactors at mesophilic (30 °C, AFBR-M) and thermophilic (55 °C, AFBR-T) temperatures. Reactors were fed sucrose-based synthetic wastewater (5000 mg chemical oxygen demand·L^?1) in the HRT of 8, 6, 4, 2, or 1 h. H₂ production rate increased from 67.8 ± 14.8 to 194.9 ± 57.0 ml H₂·h^?1 L^?1 (AFBR-T) and from 72.0 ± 10.0 to 344.4 ± 74.0 mL H₂·h^?1·l^?1 (AFBR-M) when HRT decreased from 8 to 1 h. Maximum H₂ yields for AFBR-T and AFBR-M were 1.93 ± 0.21 and 2.68 ± 0.48 mol H₂·mol^?1 sucrose, respectively. The main metabolites were acetic acid (31.3%–41.5%) and butyric acid (10.2%–20.7%) (AFBR-M) and acetate (20.1%–39.3%) and ethanol (14.3%–29.9%) (AFBR-T). Denaturing gradient gel electrophoresis profiles revealed selective enrichment of microbial populations responsible for H₂ production by the aceto-butyric route (AFBR-M) and ethanol-type fermentation (AFBR-T).     

Biohydrogen production in anaerobic fluidized bed reactors: Effect of support material and hydraulic retention time

This study evaluated two different support materials (polystyrene and expanded clay) for biohydrogen production in an anaerobic fluidized bed reactor (AFBR) treating synthetic wastewater containing glucose (4000 mg L⁻¹). The AFBRs contained either polystyrene (R1) or expanded clay (R2) as support materials were inoculated with thermally pre-treated anaerobic sludge and operated at a temperature of 30 °C and a pH of approximately 5.5. The AFBRs were operated with a range of hydraulic retention times (HRTs) between 1 and 8 h. For R1 with an HRT of 2 h, the maximum hydrogen yield (HY) was 1.90 mol H₂ mol⁻¹ glucose, with 0.805 mg of biomass (as total volatile solids, or TVS) attached to each g of polystyrene. For R2 operated at an HRT of 2 h, the maximum HY was 2.59 mol H₂ mol⁻¹ glucose, with 1.100 mg of attached biomass (as TVS) g⁻¹ expanded clay. The highest hydrogen production rates (HPR) were 0.95 and 1.21 L h⁻¹ L⁻¹ for R1 and R2, respectively, using an HRT of 1 h. The H₂ content increased from 16–47% for R1 and from 22–51% for R2. No methane was detected in the biogas produced throughout the period of AFBR operation. These results show that the values of HY, HPR, H₂ content, and g of attached biomass g⁻¹ support material were all higher for AFBRs containing expanded clay than for reactors containing polystyrene.     

Long-term stability of hydrogen and organic acids production in an anaerobic fluidized-bed reactor using heat treated anaerobic sludge inoculum

This study evaluates the stability of hydrogen and organic acids production in an anaerobic fluidized-bed reactor (AFBR) that contains expanded clay (2.8–3.35 mm in diameter) as a support medium and is operated on a long-term basis. The reactor was inoculated with thermally pre-treated anaerobic sludge and operated with decreasing hydraulic retention time (HRT), from 8 h to 1 h, at a controlled temperature of 30 °C and a pH of about 3.8. Glucose (2000 mg L^?1) was used as the substrate, generating conversion rates of 92–98%. Decreasing the HRT from 8 h to 1 h led to an increase in average hydrogen-production rates, with a maximum value of 1.28 L h^?1 L^?1 for an HRT of 1 h. In general, hydrogen yield production increased as HRT decreased, reaching 2.29 mol of H₂/mol glucose at an HRT of 2 h and yielding a maximum hydrogen content of 37% in the biogas. No methane was detected in the biogas throughout the period of operation. The main soluble metabolites (SMP) were acetic acid (46.94–53.84% of SMP) and butyric acid (34.51–42.16% of SMP), with less than 15.49% ethanol. The steady performance of the AFBR may be attributed to adequate thermal treatment of the inoculum, the selection of a suitable support medium for microbial adhesion, and the choice of satisfactory environmental conditions imposed on the system. The results show that stable hydrogen production and organic acids production were maintained in the AFBR over a period of 178 days.     

Design study of an AnSBBR for hydrogen production by co-digestion of whey with glycerin: Interaction effects of organic load,cycle time and feed strategy

An anaerobic sequencing batch biofilm reactor (AnSBBR) treating a mixture of dairy industry wastewater and biodiesel production wastewater (co-digestion of whey with glycerin) was applied to hydrogen production. The influence of fed-batch and batch mode, cycle time and interactions effects between influent concentration and cycle time (2, 3 and 4 h) over the organic loading rate were assessed in order to obtain a sensitivity analysis for important operational variables to the reactor. It was possible to find an optimal cycle time of 3 h with an influent concentration of 7000 mgCOD L^?1 (molar productivity 129.0 molH₂ m^?3 d^?1 and yield 5.4 molH₂ kgCOD^?1). Reactor operation in fed-batch mode allowed higher hydrogen production rates. Increasing the influent concentration (with a constant cycle time) was better for the hydrogen production process than decreasing the cycle length (with a constant influent concentration), which means that these two parameters have different weights in the organic loading rate. The best operational conditions produce hydrogen via acetic, butyric and valeric acids similarly. The system is able to produce 1.3 kJ per gram of COD applied.     

Fermentative hydrogen production from starch using natural mixed cultures

Batch and continuous tests were conducted to evaluate fermentative hydrogen production from starch (at a concentration of chemical oxygen demand (COD) 20 g/L) at 35 °C by a natural mixed culture of paper mill wastewater treatment sludge. The optimal initial cultivation pH (tested range 5–7) and substrate concentration (tested range 5–60-gCOD/L) were evaluated by batch reactors while the effects of hydraulic retention time (HRT) on hydrogen production, as expressed by hydrogen yield (HY) and hydrogen production rate (HPR), were evaluated by continuous tests. The experimental results indicate that the initial cultivation pH markedly affected HY, maximum HPR, liquid fermentation product concentration and distribution, butyrate/acetate concentration ratio and metabolic pathway. The optimal initial cultivation pH was 5.5 with peak values of HY 1.1 mol-H₂/mol-hexose maximum HPR 10.4 mmol-H₂/L/h and butyrate concentration 7700 mg-COD/L. In continuous hydrogen fermentation, the optimal HRT was 4 h with peak HY of 1.5 mol-H₂/mol-hexose, peak HPR of 450 mmol-H₂/L/d and lowest butyrate concentration of 3000 mg-COD/L. The HPR obtained was 280% higher than reported values. A shift in dominant hydrogen-producing microbial population along with HRT variation was observed with Clostridium butyricum, C. pasteurianum, Klebshilla pneumoniae, Streptococcus sp., and Pseudomonas sp. being present at efficient hydrogen production at the HRTs of 4–6 h. Strategies based on the experimental results for optimal hydrogen production from starch are proposed.     

Effects of substrate concentration and hydraulic retention time on hydrogen production from common reed by enriched mixed culture in continuous anaerobic bioreactor

This study aims to investigate the effect of substrate concentration and hydraulic retention time (HRT) on hydrogen production in a continuous anaerobic bioreactor from unhydrolyzed common reed (Phragmites australis) an invasive wetland and perennial grass. The bioreactor has capacity of 1 L and working volume of 600 mL. It was operated at pH 5.5, temperature at 37 °C, hydraulic retention time (HRT) 12 h, and variation of substrate concentration from 40, 50, and 60 g COD/L, respectively. Afterward, the HRT was then varied from 12, 8, to 4 h for checking the optimal biohydrogen production. Each condition was run until reach steady state on hydrogen production rate (HPR) which based on hydrogen percentage and daily volume. The results were obtained the peak of substrate concentration was at the 50 g COD/L with HRT 12 h, average HPR and H₂ concentration were 28.71 mL/L/h and 36.29%, respectively. The hydrogen yield was achieved at 106.23 mL H₂/g CODre. The substrate concentration was controlled at 50 g COD/L for the optimal HRT experiments. It was found that the maximum of average HPR and H₂ concentration were 43.28 mL/L/h and 36.96%, respectively peak at HRT 8 h with the corresponding hydrogen yield of 144.35 mL H₂/g CODre. Finally, this study successful produce hydrogen from unhydrolyzed common reed by enriched mixed culture in continuous anaerobic bioreactor.     

Hydrogen fermentation of different galactose–glucose compositions during various hydraulic retention times (HRTs)

This study investigated the effects of sugar composition and hydraulic retention time (HRT) on continuous hydrogen fermentation. Continuously-stirred tank reactors (CSTRs) were inoculated with heat-treated digester sludge and fed with 15 g/L of glucose, galactose and galactose: glucose mixture (8:2 ratio-simulating the hydrolysate composition of macroalgae) at HRTs of 6–24 h. Peak hydrogen production rate (HPR) and hydrogen yield (HY) of 4.49 L/L/d and 1.62 mol/mol glucose_added were attained while using glucose as feedstock at HRTs of 6 and 18 h, respectively. Meanwhile, galactose provided a peak HPR and HY of 2.35 L/L/d and 1.00 mol/mol galactose_added during the HRTs of 12 and 24 h, respectively. In case of mixed sugars (galactose 8: glucose 2) the production performances were inferior to the sole sugar conditions due to the low substrate utilization of less than 65%, which showed a maximal HPR and HY of 2.75 L/L/d and 0.48 mol/mol carbohydrate_added at the HRTs of 6 and 18 h, respectively.     

Dark fermentative hydrogen production from sucrose and molasses

There are many factors affecting the dark fermentative hydrogen production. The interaction of these factors, that is, their combined effects, should be investigated for better design of the systems with stable and higher hydrogen yields. This study aimed to investigate the combined effects of initial substrate, pH, and biomass (or initial substrate to biomass) values on hydrogen production from sucrose and sugar‐beet molasses. Therefore, optimum initial chemical oxygen demand (COD), pH, and volatile suspended solids (VSS) or initial substrate to biomass (VSS) ratio (S/X_o) values leading to the highest dark fermentative hydrogen production were investigated in batch reactors. An experimental design approach (response surface methodology) was used. Results revealed that when sucrose was the substrate, maximum hydrogen production yield (HY) of 2.3 mol H₂/mol sucrose_added was obtained at initial pH of 7 and COD of 10 g/L. Initial S/X_o values studied (4–20 g COD/g VSS) had no effect on HY, while the initial pH was found as the parameter mostly affecting both HY and hydrogen production rate (HPR). When substrate was molasses, initial COD concentration was the only variable affecting HY and HPR. Maximum of both was achieved at 10 g/L initial COD. Initial VSS values studied (2.5–7.5 g/L) had no effect on HPR and HY. This study also indicated that molasses leads to homoacetogenesis for potentially containing intrinsic microorganism and/or natural constituents; thus, sucrose is more advantageous for hydrogen production via fermentation. Homoacetogenesis should be prevented for effective optimization via response surface methodology, if substrate is a natural carbon source potential to have intrinsic microorganisms. Copyright © 2017 John Wiley & Sons, Ltd.     

Evaluation of semi-continuous hydrogen production from enzymatic hydrolysates of Agave tequilana bagasse: Insight into the enzymatic cocktail effect over the co-production of methane

This work addresses the hydrogen production from enzymatic hydrolysates of Agave tequilana bagasse and the valorization of the acidogenic effluent for methane production in anaerobic sequencing batch reactors (ASBRs). Regarding hydrogen production, the ASBR was operated at four organic loading rates (OLRs), which were modified by decreasing the cycle time (from 24 to 12 h) and increasing the COD concentration (from 8 to 12 and 16 g L^?1). Results showed that the highest OLR promoted the highest hydrogen production rate of 25.2 ± 2.1 NmL L^?1 h^?1. Conversely, the hydrogen molar yield remained constant, obtaining similar values to the highest reported for lignocellulosic hydrolysates in continuous reactors (1.6H₂-mol mol_{consumed sugar}^?1). Regarding methane production from the acidogenic effluent, an unexpected methane suppression was observed during the first 5 cycles of the ASBR operation. Such event was attributed to the disaggregation of the granular sludge due to the remaining hydrolytic activity of the enzymatic cocktail used for the hydrolysates production. This was corroborated by feeding acetate to an ASBR (positive control) and supplying the enzymatic cocktail. Overall, even though the ASBR configuration demonstrated its suitability for hydrogen production, further studies are needed to coupling the methanogenic phase in different reactor configurations.     

The effect of hydraulic retention time on thermophilic dark fermentative biohydrogen production in the continuously operated packed bed bioreactor

The main objective of the study is to investigate the effect of hydraulic retention times on continuous dark fermentative biohydrogen production in an up-flow packed bed reactor (UPBR) containing a novel microorganism immobilization material namely polyester fiber beads. The hydrogen producing dark fermentative microorganisms were obtained by heat-pretreatment of anaerobic sludge from the acidogenic phase of an anaerobic wastewater treatment plant. Glucose was the sole carbon source and the initial concentration was 15 ± 1 g/L throughout the continuous feeding. UPBR was operated under the thermophilic condition at T = 48 ± 2 °C and at varying HRTs between 2 h and 6 h. The hydrogen productivity of continuously operated UPBR increased with increasing HRT. Hydrogen production volume varied between 4331 and 6624 ml/d, volumetric hydrogen production rates (VHPR) were obtained as 3.09–4.73 L H₂/L day, and hydrogen production yields (HY) were 0.49 mol/mol glucose-0.89 mol/mol glucose depending on HRT. Maximum daily hydrogen volume (6624 ml/d), the yield (0.89 mol/mol glucose) and VHPR (4.73 L H₂/L day) were obtained at HRT = 6 h. The production rate and the yield decreased with increasing organic loading rate due to substrate inhibition.     

Producing hydrogen from the fermentation of cheese whey and glycerol as cosubstrates in an anaerobic fluidized bed reactor

This study aimed to evaluate the effect of the organic loading rate (OLR) (60, 90, and 120 g Chemical Oxygen Demand (COD). L^?1. d^?1) on hydrogen production from cheese whey and glycerol fermentation as cosubstrates (50% cheese whey and 50% glycerol on a COD basis) in a thermophilic fluidized bed reactor (55 °C). The increase in the OLR to 90 gCOD.L^?1. d^?1 favored the hydrogen production rate (HPR) (3.9 L H₂. L^?1. d^?1) and hydrogen yield (HY) (1.7 mmol H₂. gCOD^?1_app) concomitant with the production of butyric and acetic acids. Employing 16S rRNA gene sequencing, the highest hydrogen production was related to the detection of Thermoanaerobacterium (34.9%), Pseudomonas (14.5%), and Clostridium (4.7%). Conversely, at 120 gCOD.L^?1. d^?1, HPR and HY decreased to 2.5 L H₂. L^?1. d^?1 and 0.8 mmol H₂. gCOD^?1_app, respectively, due to lactic acid production that was related to the genera Thermoanaerobacterium (50.91%) and Tumebacillus (23.56%). Cofermentation favored hydrogen production at higher OLRs than cheese whey single fermentation.     

Aspect ratio effect of bioreactor on fermentative hydrogen production with immobilized sludge

The phenomenon of bacterial wash-out frequently occurs in the traditional continuous stirred tank reactor (CSTR) systems at low hydraulic retention time (HRT). In this study, the effect of different aspect ratios, height (H) to diameter (D) of 1:1, 3:1 and 5:1, of a CSTR with immobilized anaerobic sludge on hydrogen (H₂) production were investigated. The pH, volatile suspended solids (VSS) and total solids (TS) concentrations of the seed sludge were 6.8, 33.3 and 65.1 g/L, respectively. Thermally treated sludge was immobilized by silicone gel entrapment approach. The entrapped-sludge system operated stably at a low HRT without suffering from cell wash-out. Hence, the hydrogen production rate (HPR) was enhanced by increasing organic loading rates. The immobilized sludge CSTRs were operated at 40 °C with sucrose (10, 20, 30 and 40 g COD/L) and Endo nutrient medium at different HRTs (4, 2, 1 and 0.5 h). It was found that the granule formation enhanced HPR. The maximum HPR and the H₂ yield were found to be 15.36H₂ L/h/L and 3.16 mol H₂/mol sucrose, respectively, with the H₂ content in the biogas above 44% for all tests runs.