Methodology for Estimating Streamflow by Water Balance and Rating Curve Methods Based on Logistic Regression

Both water balance (WB) and rating curve (RC) are methods for estimating streamflow. The first is mostly used to estimate reservoir outflows, while the second is usually adopted in hydrometeorological network streamflow gauges. While WB uses hourly collected data, the RC estimates streamflow using current water level and extrapolation techniques. The objective of this study was to analyze variations in the reservoir’s hourly outflow at Queimado Hydroelectric Power Plant (HPP Queimado) and to propose a method to evaluate whether the estimate of the daily outflows, obtained by the WB method, is similar to the flow values obtained at a conventional station. The logistic regression (LR) model was used because it is a method that adopts binary, categorically dependent variables to identify the event of interest. The results showed that the values of streamflow, obtained from an average of two daily readings, were a good representation of the flows in the region. The LR was able to identify atypical data, especially in the rainy season. This means that data consistency analysis can be faster and safer, when adequately employed and considering the proposed conditions, contributing to both management policies and the management of water resources.

     

Development of a new ion-imprinted polymer (IIP) with Cd2+ ions based on divinylbenzene copolymers containing amidoxime groups

Polymer Bulletin - In this study, we synthesized a new ion-imprinted polymer (IIP) based on introduction of amidoxime groups in acrylonitrile, complexation with Cd2+ ions and polymerization with...     

Improving weld formability by a novel dual-rotation bobbin tool friction stir welding

A novel dual-rotation bobbin tool friction stir welding (DBT-FSW) was developed, in which the upper shoulder (US) and lower shoulder (LS) have different rotational speeds. This process was tried to weld 3.2 mm thick aluminum-lithium alloy sheets. The metallographic analysis and torque measurement were carried out to characterize the weld formability. Experimental results show that compared to conventional bobbin tool friction stir welding, the DBT-FSW has an excellent process stability, and can produce the defect-free joints in a wider range of welding parameters. These can be attributed to the significant improvement of material flow caused by the formation of a staggered layer structure and the unbalanced force between the US and LS during the DBT-FSW process.     

Miniaturized coplanar waveguide stop band filters based on multiple tuned split ring resonators

A novel compact stop band filter consisting of a 50 /spl Omega/ coplanar waveguide (CPW) with split ring resonators (SRRs) etched in the back side of the substrate is presented. By aligning SRRs with the slots, a high inductive coupling between line and rings is achieved, with the result of a sharp and narrow rejection band in the vicinity of the resonant frequency of the rings. In order to widen the stop band of the filter, several ring pairs tuned at equally spaced frequencies within the desired gap are cascaded. The frequency response measured in the fabricated prototype device exhibits pronounced slopes at either side of the stop band and near 0 dBs insertion loss outside that band. Since SRR dimensions are much smaller than signal wavelength, the proposed filters are extremely compact and can be used to reject frequency parasitics in CPW structures by simply patterning properly tuned SRRs in the back side metal. Additional advantages are easy fabrication and compatibility with MMIC or PCB technology.     

Development of New Sulphonyl Resin from Modification of Commercial Resin

Summary This article deals with the handy synthesis of sulfonyl resins, which were produced by the treatment of a commercial sulfonic resin (Lewatit VPOC1812^® based at divinylbenzene (DVB) and styrene (STY). The preliminary chemical modification was based on the reaction of the Lewatit VPOC1812^® with thionyl chloride aiming to produce the sulfonyl chloride groups. The best conditions to obtain the sulfonyl chloride groups were: SOCl₂/SO₃H (molar ratio) =13 at 79 °C during 72 h. The resin chlorinated was afterward treated with urea, thiourea or guanidine. The functionalized resins with urea, thiourea or guanidine were produced with 56, 68 and 93% yield, respectively. The commercial and modified resins were characterized by apparent density, swelling degree, elemental analysis (CHNS), FTIR, optical microscopy (OM) and scanning electron microscopy (SEM).     

Hull-less Barley Varieties: Storage Proteins and Amino Acid Distribution in Relation to Nutritional Quality

Barley (Hordeum vulgare L.) has had an important impact on human nutrition. Hull-less barley is a genetically improved type that has been widely used in recent years. Six Brazilian hull-less barley varieties (IAC-IBON 214-82; IAC 8612-421; IAC 8501-31; IAC 8501-12; IAPAR 39-ACUMAI; IAC 8501-22) were analyzed for storage protein constituents, amino acid contents, and similarity among the hull-less barley varieties. Albumins, globulins, prolamins I and II, and glutelins were extracted and separated by SDS-PAGE. The total protein amino acid contents of the flour were also determined for each variety by TLC and HPLC. Variations in intensity and appearance and disappearance of protein bands were observed among the varieties suggesting genetic variability. However, the amino acid profile did not indicate any major variations in the amino acid concentrations. The high lysine and threonine total concentrations detected in the seeds of the hull-less barley varieties encouraged an investigation into the regulation of amino acid metabolism and storage protein synthesis.