Household and behavioral determinants of indoor PM2.5 in a rural solid fuel burning Native American community

Indoor and outdoor concentrations of PM_2.5 were measured for 24 h during heating and non-heating seasons in a rural solid fuel burning Native American community. Household building characteristics were collected during the initial home sampling visit using technician walkthrough questionnaires, and behavioral factors were collected through questionnaires by interviewers. To identify seasonal behavioral factors and household characteristics associated with indoor PM_2.5, data were analyzed separately by heating and non-heating seasons using multivariable regression. Concentrations of PM_2.5 were significantly higher during the heating season (indoor: 36.2 μg/m³; outdoor: 22.1 μg/m³) compared with the non-heating season (indoor: 14.6 μg/m³; outdoor: 9.3 μg/m³). Heating season indoor PM_2.5 was strongly associated with heating fuel type, housing type, indoor pests, use of a climate control unit, number of interior doors, and indoor relative humidity. During the non-heating season, different behavioral and household characteristics were associated with indoor PM_2.5 concentrations (indoor smoking and/or burning incense, opening doors and windows, area of surrounding environment, building size and height, and outdoor PM_2.5). Homes heated with coal and/or wood, or a combination of coal and/or wood with electricity and/or natural gas had elevated indoor PM_2.5 concentrations that exceeded both the EPA ambient standard (35 μg/m³) and the WHO guideline (25 μg/m³).     

Monitoring and modeling of household air quality related to use of different Cookfuels in Paraguay

In Paraguay, 49% of the population depends on biomass (wood and charcoal) for cooking. Residential biomass burning is a major source of fine particulate matter (PM_2.5) and carbon monoxide (CO) in and around the household environment. In July 2016, cross‐sectional household air pollution sampling was conducted in 80 households in rural Paraguay. Time‐integrated samples (24 hours) of PM_2.5 and continuous CO concentrations were measured in kitchens that used wood, charcoal, liquefied petroleum gas (LPG), or electricity to cook. Qualitative and quantitative household‐level variables were captured using questionnaires. The average PM_2.5 concentration (μg/m³) was higher in kitchens that burned wood (741.7 ± 546.4) and charcoal (107.0 ± 68.6) than in kitchens where LPG (52.3 ± 18.9) or electricity (52.0 ± 14.8) was used. Likewise, the average CO concentration (ppm) was higher in kitchens that used wood (19.4 ± 12.6) and charcoal (7.6 ± 6.5) than in those that used LPG (0.5 ± 0.6) or electricity (0.4 ± 0.6). Multivariable linear regression was conducted to generate predictive models for indoor PM_2.5 and CO concentrations (predicted R² = 0.837 and 0.822, respectively). This study provides baseline indoor air quality data for Paraguay and presents a multivariate statistical approach that could be used in future research and intervention programs.     

Coarse particulate matter and airborne endotoxin within wood stove homes

Emissions from indoor biomass burning are a major public health concern in developing areas of the world. Less is known about indoor air quality, particularly airborne endotoxin, in homes burning biomass fuel in residential wood stoves in higher income countries. A filter‐based sampler was used to evaluate wintertime indoor coarse particulate matter (PM_10‐2.5) and airborne endotoxin (EU/m³, EU/mg) concentrations in 50 homes using wood stoves as their primary source of heat in western Montana. We investigated number of residents, number of pets, dampness (humidity), and frequency of wood stove usage as potential predictors of indoor airborne endotoxin concentrations. Two 48‐h sampling events per home revealed a mean winter PM_10‐2.5 concentration (± s.d.) of 12.9 (± 8.6) μg/m³, while PM_2.5 concentrations averaged 32.3 (± 32.6) μg/m³. Endotoxin concentrations measured from PM_10‐2.5 filter samples were 9.2 (± 12.4) EU/m³ and 1010 (± 1524) EU/mg. PM_10‐2.5 and PM_2.5 were significantly correlated in wood stove homes (r = 0.36, P < 0.05). The presence of pets in the homes was associated with PM_10‐2.5 but not with endotoxin concentrations. Importantly, none of the other measured home characteristics was a strong predictor of airborne endotoxin, including frequency of residential wood stove usage.     

Unexpected increase in indoor pollutants after the introduction of a smoke‐free policy in a correctional center

Correctional centers (prisons) are one of the few non‐residential indoor environments where smoking is still permitted. However, few studies have investigated indoor air quality (IAQ) in these locations. We quantified the level of inmate and staff exposure to secondhand smoke, including particle number (PN) count, and we assessed the impact of the smoking ban on IAQ. We performed measurements of indoor and outdoor PM_2.5 and PN concentrations, personal PN exposure levels, volatile organic compounds (VOCs), and nicotine both before and after a complete indoor smoking ban in an Australian maximum security prison. Results show that the indoor 24‐h average PM_2.5 concentrations ranged from 6 (±1) μg/m³ to 17 (±3) μg/m³ pre‐ban. The post‐ban levels ranged from 7 (±2) μg/m³ to 71 (±43) μg/m³. While PM_2.5 concentrations decreased in one unit post‐ban, they increased in the other two units. Similar post‐ban increases were also observed in levels of PN and VOCs. We describe an unexpected increase of indoor pollutants following a total indoor smoking ban in a prison that was reflected across multiple pollutants that are markers of smoking. We hypothesise that clandestine post‐ban smoking among inmates may have been the predominant cause.     

Particle characterization in retail environments: concentrations,sources, and removal mechanisms

Particles in retail environments can have consequences for the occupational exposures of retail workers and customers, as well as the energy costs associated with ventilation and filtration. Little is known about particle characteristics in retail environments. We measured indoor and outdoor mass concentrations of PM₁₀ and PM_2.5, number concentrations of submicron particles (0.02–1 μm), size‐resolved 0.3–10 μm particles, as well as ventilation rates in 14 retail stores during 24 site visits in Pennsylvania and Texas. Overall, the results were generally suggestive of relatively clean environments when compared to investigations of other building types and ambient/occupational regulatory limits. PM₁₀ and PM_2.5 concentrations (mean ± s.d.) were 20 ± 14 and 11 ± 10 μg/m³, respectively, with indoor‐to‐outdoor ratios of 1.0 ± 0.7 and 0.88 ± 1.0. Mean submicron particle concentrations were 7220 ± 7500 particles/cm³ with an indoor‐to‐outdoor ratio of 1.18 ± 1.30. The median contribution to PM₁₀ and PM_2.5 concentrations from indoor sources (vs. outdoors) was 83% and 53%, respectively. There were no significant correlations between measured ventilation rates and particle concentrations of any size. When examining options to lower PM_2.5 concentrations below regulatory limits, the required changes to ventilation and filtration efficiency were site specific and depended on the indoor and outdoor concentration, emission rate, and infiltration level.     

Concurrent assessment of personal,indoor, and outdoor PM2.5 and PM1 levels and source contributions using novel low-cost sensing devices

The intensity, frequency, duration, and contribution of distinct PM_2.5 sources in Asian households have seldom been assessed; these are evaluated in this work with concurrent personal, indoor, and outdoor PM_2.5 and PM₁ monitoring using novel low-cost sensing (LCS) devices, AS-LUNG. GRIMM-comparable observations were acquired by the corrected AS-LUNG readings, with R² up to 0.998. Twenty-six non-smoking healthy adults were recruited in Taiwan in 2018 for 7-day personal, home indoor, and home outdoor PM monitoring. The results showed 5-min PM_2.5 and PM₁ exposures of 11.2 ± 10.9 and 10.5 ± 9.8 µg/m³, respectively. Cooking occurred most frequently; cooking with and without solid fuel contributed to high PM_2.5 increments of 76.5 and 183.8 µg/m³ (1 min), respectively. Incense burning had the highest mean PM_2.5 indoor/outdoor (1.44 ± 1.44) ratios at home and on average the highest 5-min PM_2.5 increments (15.0 µg/m³) to indoor levels, among all single sources. Certain events accounted for 14.0%-39.6% of subjects’ daily exposures. With the high resolution of AS-LUNG data and detailed time-activity diaries, the impacts of sources and ventilations were assessed in detail.     

Real-time measurements of PM2.5 and ozone to assess the effectiveness of residential indoor air filtration in Shanghai homes

Portable air cleaners are increasingly used in polluted areas in an attempt to reduce human exposure; however, there has been limited work characterizing their effectiveness at reducing exposure. With this in mind, we recruited forty-three children with asthma from suburban Shanghai and deployed air cleaners (with HEPA and activated carbon filters) in their bedrooms. During both 2-week filtration and non-filtration periods, low-cost PM_2.5 and O₃ air monitors were used to measure pollutants indoors, outdoors, and for personal exposure. Indoor PM_2.5 concentrations were reduced substantially with the use of air cleaners, from 34 ± 17 to 10 ± 8 µg/m³, with roughly 80% of indoor PM_2.5 estimated to come from outdoor sources. Personal exposure to PM_2.5 was reduced from 40 ± 17 to 25 ± 14 µg/m³. The more modest reductions in personal exposure and high contribution of outdoor PM_2.5 to indoor concentrations highlight the need to reduce outdoor PM_2.5 and/or to clean indoor air in multiple locations. Indoor O₃ concentrations were generally low (mean = 8±4 ppb), and no significant difference was seen by filtration status. The concentrations of pollutants and the air cleaner effectiveness were highly variable over time and across homes, highlighting the usefulness of real-time air monitors for understanding individual exposure reduction strategies.     

Maternal exposure to carbon monoxide and fine particulate matter during pregnancy in an urban Tanzanian cohort

Low birthweight contributes to as many as 60% of all neonatal deaths; exposure during pregnancy to household air pollution has been implicated as a risk factor. Between 2011 and 2013, we measured personal exposures to carbon monoxide (CO) and fine particulate matter (PM_2.5) in 239 pregnant women in Dar es Salaam, Tanzania. CO and PM_2.5 exposures during pregnancy were moderately high (geometric means 2.0 ppm and 40.5 μg/m³); 87% of PM_2.5 measurements exceeded WHO air quality guidelines. Median and high (75th centile) CO exposures were increased for those cooking with charcoal and kerosene versus kerosene alone in quantile regression. High PM_2.5 exposures were increased with charcoal use. Outdoor cooking reduced median PM_2.5 exposures. For PM_2.5, we observed a 0.15 kg reduction in birthweight per interquartile increase in exposure (23.0 μg/m³) in multivariable linear regression; this finding was of borderline statistical significance (95% confidence interval 0.30, 0.00 kg; P = 0.05). PM_2.5 was not significantly associated with birth length or head circumference nor were CO exposures associated with newborn anthropometrics. Our findings contribute to the evidence that exposure to household air pollution, and specifically fine particulate matter, may adversely affect birthweight.     

Infiltration of fine particles in urban daycares

Singapore is a tropical country with a high density of day-care facilities whose indoor environments may be adversely affected by outdoor fine particle (PM_2.5) air pollution. To reduce this problem requires effective, evidence-based exposure-reduction strategies. Little information is available on the penetration of outdoor PM_2.5 into day-care environments. Our study attempted to address the following objectives: to measure indoor infiltration factor (F_inf) of PM_2.5 from outdoor PM_2.5 and to determine the building parameters that modify the indoor PM_2.5. We collected indoor/outdoor 1-min PM_2.5 from 50 day-care classrooms. We noted mean F_inf ± SD of 0.65 ± 0.22 in day-care rooms which are naturally ventilated and lower F_inf ± SD values of 0.47 ± 0.18 for those that are air-conditioned: values which are lower than those reported in Singapore residences. The air exchange rates were higher in naturally ventilated rooms (1.47 vs 0.86 h⁻¹). However, fine particle deposition rates were lower for naturally ventilated rooms (0.67 ± 0.43 h⁻¹) compared with air-conditioned ones (1.03 ± 0.55 h⁻¹) presumably due to composite rates linked to the filters within the split unit air-conditioners, higher recirculation rates, and interior surfaces in the latter. Our findings indicate that children remaining indoor in daycares where air-conditioning is used can reduce their PM_2.5 exposures during outdoor pollution episodes.     

Kerosene lighting contributes to household air pollution in rural Uganda

The literature on the contribution of kerosene lighting to indoor air particulate concentrations is sparse. In rural Uganda, kitchens are almost universally located outside the main home, and kerosene is often used for lighting. In this study, we obtained longitudinal measures of particulate matter 2.5 microns or smaller in size (PM_2.5) from living rooms and kitchens of 88 households in rural Uganda. Linear mixed‐effects models with a random intercept for household were used to test the hypotheses that primary reported lighting source and kitchen location (indoor vs outdoor) are associated with PM_2.5 levels. During initial testing, households reported using the following sources of lighting: open‐wick kerosene (19.3%), hurricane kerosene (45.5%), battery‐powered (33.0%), and solar (1.1%) lamps. During follow‐up testing, these proportions changed to 29.5%, 35.2%, 18.2%, and 9.1%, respectively. Average ambient, living room, and kitchen PM_2.5 levels were 20.2, 35.2, and 270.0 μg/m³. Living rooms using open‐wick kerosene lamps had the highest PM_2.5 levels (55.3 μg/m³) compared to those using solar lighting (19.4 μg/m³; open wick vs solar, P=.01); 27.6% of homes using open‐wick kerosene lamps met World Health Organization indoor air quality standards compared to 75.0% in homes using solar lighting.     

Exposure to fine particulate matter in ten night clubs in Athens Greece: Studying the effect of ventilation, cigarette smoking and resuspension

The aim of the present work is to study the occupants' exposure to fine particulate concentrations in ten nightclubs (NCs) in Athens, Greece. Measurements of PM₁ and PM_2.5 were made in the outdoor and indoor environment of each NC. The average indoor PM₁ and PM_2.5 concentrations were found to be 181.77 μg m^− 3 and 454.08 μg m^− 3 respectively, while the corresponding outdoor values were 11.04 μg m^− 3 and 32.19 μg m^− 3. Ventilation and resuspension rates were estimated through consecutive numerical experiments with an indoor air quality model and were found to be remarkably lower than the minimum values recommended by national standards. The relative effects of the ventilation and smoking on the occupants' exposures were examined using multiple regression techniques. It was found that given the low ventilation rates, the effect of smoking as well as the occupancy is of the highest importance. Numerical evaluations showed that if the ventilation rates were at the minimum values set by national standards, then the indoor exposures would be reduced at the 70% of the present exposure values.     

Exposure to household air pollution from biomass cookstoves and blood pressure among women in rural Honduras: A cross‐sectional study

Growing evidence links household air pollution exposure from biomass cookstoves with elevated blood pressure. We assessed cross‐sectional associations of 24‐hour mean concentrations of personal and kitchen fine particulate matter (PM_2.5), black carbon (BC), and stove type with blood pressure, adjusting for confounders, among 147 women using traditional or cleaner‐burning Justa stoves in Honduras. We investigated effect modification by age and body mass index. Traditional stove users had mean (standard deviation) personal and kitchen 24‐hour PM_2.5 concentrations of 126 μg/m³ (77) and 360 μg/m³ (374), while Justa stove users’ exposures were 66 μg/m³ (38) and 137 μg/m³ (194), respectively. BC concentrations were similarly lower among Justa stove users. Adjusted mean systolic blood pressure was 2.5 mm Hg higher (95% CI, 0.7‐4.3) per unit increase in natural log‐transformed kitchen PM_2.5 concentration; results were stronger among women of 40 years or older (5.2 mm Hg increase, 95% CI, 2.3‐8.1). Adjusted odds of borderline high and high blood pressure (categorized) were also elevated (odds ratio = 1.5, 95% CI, 1.0‐2.3). Some results included null values and are suggestive. Results suggest that reduced household air pollution, even when concentrations exceed air quality guidelines, may help lower cardiovascular disease risk, particularly among older subgroups.     

Fine and ultrafine particle exposures on 73 trips by car to 65 non‐smoking restaurants in the San Francisco Bay Area

A number of studies indicate cooking is a major source of exposure to particulate matter, but few studies have measured indoor air pollution in restaurants, where cooking predominates. We made 73 visits by car to 65 different non‐smoking restaurants in 10 Northern California towns while carrying portable continuous monitors that unobtrusively measured ultrafine (down to 10 nm) and fine (PM_2.5) particles to characterize indoor restaurant exposures, comparing them with exposures in the car. The mean ultrafine number concentrations in the restaurants on dinner visits averaging 1.4 h was 71 600 particles/cm³, or 4.3 times the mean concentration on car trips, and 12.3 times the mean background concentration in the residence. Restaurants that cooked dinner in the same room as the patrons had higher ultrafine concentrations than restaurants with separate kitchens. Restaurant PM_2.5 mass concentrations averaged 36.3 μg/m³, ranging from 1.5 to 454 μg/m³, but were relatively low on most visits: 43% of the indoor means were below 10 μg/m³ and 66% were below 20 μg/m³, with 5.5% above 100 μg/m³. Exposure to fine and ultrafine particles when visiting a restaurant exceeded the exposure a person received while traveling by car to and from the restaurant.     

Impact of neighborhood biomass cooking patterns on episodic high indoor particulate matter concentrations in clean fuel homes in Dhaka,Bangladesh

Exposure to particulate matter (PM_2.5) from the burning of biomass is associated with increased risk of respiratory disease. In Dhaka, Bangladesh, households that do not burn biomass often still experience high concentrations of PM_2.5, but the sources remain unexplained. We characterized the diurnal variation in the concentrations of PM_2.5 in 257 households and compared the risk of experiencing high PM_2.5 concentrations in biomass and non‐biomass users. Indoor PM_2.5 concentrations were estimated every minute over 24 h once a month from April 2009 through April 2010. We found that households that used gas or electricity experienced PM_2.5 concentrations exceeding 1000 μg/m³ for a mean of 35 min within a 24‐h period compared with 66 min in biomass‐burning households. In both households that used biomass and those that had no obvious source of particulate matter, the probability of PM_2.5 exceeding 1000 μg/m³ were highest during distinct morning, afternoon, and evening periods. In such densely populated settings, indoor pollution in clean fuel households may be determined by biomass used by neighbors, with the highest risk of exposure occurring during cooking periods. Community interventions to reduce biomass use may reduce exposure to high concentrations of PM_2.5 in both biomass and non‐biomass using households.     

Modeling approaches and performance for estimating personal exposure to household air pollution: A case study in Kenya

This study assessed the performance of modeling approaches to estimate personal exposure in Kenyan homes where cooking fuel combustion contributes substantially to household air pollution (HAP). We measured emissions (PM_2.5, black carbon, CO); household air pollution (PM_2.5, CO); personal exposure (PM_2.5, CO); stove use; and behavioral, socioeconomic, and household environmental characteristics (eg, ventilation and kitchen volume). We then applied various modeling approaches: a single-zone model; indirect exposure models, which combine person-location and area-level measurements; and predictive statistical models, including standard linear regression and ensemble machine learning approaches based on a set of predictors such as fuel type, room volume, and others. The single-zone model was reasonably well-correlated with measured kitchen concentrations of PM_2.5 (R² = 0.45) and CO (R² = 0.45), but lacked precision. The best performing regression model used a combination of survey-based data and physical measurements (R² = 0.76) and a root mean-squared error of 85 µg/m³, and the survey-only-based regression model was able to predict PM2.5 exposures with an R² of 0.51. Of the machine learning algorithms evaluated, extreme gradient boosting performed best, with an R² of 0.57 and RMSE of 98 µg/m³.     

Indoor fine particulate matter and demographic,household, and wood stove characteristics among rural US homes heated with wood fuel

Household heating using wood stoves is common practice in many rural areas of the United States (US) and can lead to elevated concentrations of indoor fine particulate matter (PM_2.5). We collected 6-day measures of indoor PM_2.5 during the winter and evaluated household and stove-use characteristics in homes at three rural and diverse study sites. The median indoor PM_2.5 concentration across all homes was 19 µg/m³, with higher concentrations in Alaska (median = 30, minimum = 4, maximum = 200, n = 10) and Navajo Nation homes (median = 29, minimum = 3, maximum = 105, n = 23) compared with Montana homes (median = 16, minimum = 2, maximum = 139, n = 59). Households that had not cleaned the chimney within the past year had 65% higher geometric mean PM_2.5 compared to those with chimney cleaned within 6 months (95% confidence interval [CI]: −1, 170). Based on a novel wood stove grading method, homes with low-quality and medium-quality stoves had substantially higher PM_2.5 compared to homes with higher-quality stoves (186% higher [95% CI: 32, 519] and 161% higher; [95% CI:27, 434], respectively). Our findings highlight the need for, and complex nature of, regionally appropriate interventions to reduce indoor air pollution in rural wood-burning regions. Higher-quality stoves and behavioral practices such as regular chimney cleaning may help improve indoor air quality in such homes.     

Personal exposure to PM2.5 in Chinese rural households in the Yangtze River Delta

High levels of PM_2.5 exposure and associated health risks are of great concern in rural China. For this study, we used portable PM_2.5 monitors for monitoring concentrations online, recorded personal time‐activity patterns, and analyzed the contribution from different microenvironments in rural areas of the Yangtze River Delta, China. The daily exposure levels of rural participants were 66 μg/m³ (SD 40) in winter and 65 μg/m³ (SD 16) in summer. Indoor exposure levels were usually higher than outdoor levels. The exposure levels during cooking in rural kitchens were 140 μg/m³ (SD 116) in winter and 121 μg/m³ (SD 70) in summer, the highest in all microenvironments. Winter and summer values were 252 μg/m³ (SD 103) and 204 μg/m³ (SD 105), respectively, for rural people using biomass for fuel, much higher than those for rural people using LPG and electricity. By combining PM_2.5concentrations and time spent in different microenvironments, we found that 92% (winter) and 85% (summer) of personal exposure to PM_2.5in rural areas was attributable to indoor microenvironments, of which kitchens accounted for 24% and 27%, respectively. Consequently, more effective policies and measures are needed to replace biomass fuel with LPG or electricity, which would benefit the health of the rural population in China.     

Indoor exposure to particulate matter and the incidence of acute lower respiratory infections among children: A birth cohort study in urban Bangladesh

Approximately half of all children under two years of age in Bangladesh suffer from an acute lower respiratory infection (ALRI) each year. Exposure to indoor biomass smoke has been consistently associated with an increased risk of ALRI in young children. Our aim was to estimate the effect of indoor exposure to particulate matter (PM_2.5) on the incidence of ALRI among children in a low‐income, urban community in Bangladesh. We followed 257 children through two years of age to determine their frequency of ALRI and measured the PM_2.5 concentrations in their sleeping space. Poisson regression was used to estimate the association between ALRI and the number of hours per day that PM_2.5 concentrations exceeded 100 μg/m³, adjusting for known confounders. Each hour that PM_2.5 concentrations exceeded 100 μg/m³ was associated with a 7% increase in incidence of ALRI among children aged 0–11 months (adjusted incidence rate ratio (IRR) 1.07, 95% CI 1.01–1.14), but not in children 12–23 months old (adjusted IRR 1.00, 95% CI 0.92–1.09). Results from this study suggest that reducing indoor PM_2.5 exposure could decrease the frequency of ALRI among infants, the children at highest risk of death from these infections.     

Controlled experiments measuring personal exposure to PM2.5 in close proximity to cigarette smoking

Few measurements of exposure to secondhand smoke (SHS) in close proximity to a smoker are available. Recent health studies have demonstrated an association between acute (<2 h) exposures to high concentrations of SHS and increased risk of cardiovascular and respiratory disease. We performed 15 experiments inside naturally ventilated homes and 16 in outdoor locations, each with 2–4 non‐smokers sitting near a cigarette smoker. The smoker's and non‐smokers' real‐time exposures to PM_2.5 from SHS were measured by using TSI SidePak monitors to sample their breathing zones. In 87% of the residential indoor experiments, the smoker received the highest average exposure to SHS, with PM_2.5 concentrations ranging from 50–630 μg/m³. During the active smoking period, individual non‐smokers sitting within approximately 1 m of a smoker had average SHS exposures ranging from negligible up to >160 μg/m³ of PM_2.5. The average incremental exposure of the non‐smokers was higher indoors (42 μg/m³, n = 35) than outdoors (29 μg/m³, n = 47), but the overall indoor and outdoor frequency distributions were similar. The 10‐s PM_2.5 averages during the smoking periods showed great variability, with multiple high concentrations of short duration (microplumes) both indoors and outdoors.     

Indoor and outdoor PM2.5 and PM10 concentrations in the air during a dust storm

Asian dust storms (ADS) originating from the arid deserts of Mongolia and China are a well-known springtime meteorological phenomenon throughout East Asia. The ventilation systems in office utilize air from outside and therefore it is necessary to understand how these dust storms affect the concentrations of PM_2.5 and PM₁₀ in both the indoor and outdoor air. We measured dust storm pollution particles in an office building using a direct-reading instrument (PC-2 Quartz Crystal Microbalance, QCM) that measured particle size and concentration every 10 min for 1 h, three times a day. A three-fold increase in the concentrations of PM_2.5 and PM₁₀ in the indoor and outdoor air was recorded during the dust storms. After adjusting for other covariates, autoregression models indicated that PM_2.5 and PM₁₀ in the indoor air increased significantly (21.7 μg/m³ and 23.0 μg/m³ respectively) during dust storms. The ventilation systems in high-rise buildings utilize air from outside and therefore the indoor concentrations of fine and coarse particles in the air inside the buildings are significantly affected by outside air pollutants, especially during dust storms.