某超限高层建筑结构整体设计

介绍了某超限高层建筑结构工程概况，对议事中心结构超限进行了分析，提出了结栖设计与抗震构造措施，并进行了结构计算与分析，具有一定的参考价值。     

结构梁斜拉桥锚拉板结构研究

为确保结构的安全使用，对一具体结合梁斜拉桥锚固结构CM1、CM21作空间非线性有限元分析。由分析结果，对其锚固结构原设计方案提出了改进建议，有效提高了结构初始屈服荷载，缓解了应力集中。     

在水平地震作用下高层建筑的变结构控制

从改变结构刚度和阻尼能改变结构动力特性的概念出发，提出了变结构控制方法，并采用复模态分析理论对变结构控制状态及其减震效果进行了优化分析．     

论砖混结构建筑工程质量的监理与控制

分析了目前砖混结构房屋普遍存在的问题，提出了消除砖混结构通病的技术措施，以确保建筑物结构的安全。     

浅析钢筋混凝土结构的非线性问题

介绍了钢筋混凝土结构非线性分析的意义及非线性主要包括的问题，探讨了钢筋混凝土结构有限元分析的特点与国内外研究现状，最后提出了钢筋混凝土结构有限元分析的发展趋势和研究方向。     

索穹顶(Cable Dome)结构的特性及分析

本文首先论述了索穹顶结构的特性和工作机理，根据结构的特点，提出了考虑单元非常应变特性的非线性五结点曲线铰接单元，在单元曲线坐标系中建立了单元的有限元基本方程及单元的刚度矩阵。数值分析结果表明，本文提出的分析模型，理论是正确的，采用的计算方法是有效的，并具有很高的精度，可作为设计索穹顶结构的基础理论和方法，应用于索穹顶结构的形态分析和非线性分析。     

中山东一路17号大楼房屋质量检测分析

本文通过对该房屋质量详细检测，并进行结构分析，提出了结构加固措施。     

框架-剪力墙结构受力及抗震性能分析

为了满足多种建筑功能的要求，结合剪力墙结构和框架结构的优缺点，提出了框架-剪力墙结构，分析了框架与剪力墙协同工作的原理，对其结构受力性能进行了分析，详细探讨了框架-剪力墙结构的抗震性能，指出该体系改善了结构整体的受力性能，并提高了结构的抗震能力。     

框支分区剪力墙高层商住楼抗震性能研究及设计建议

本文提出一种新的框支剪力墙结构形式——框支分区剪力墙结构，并以一栋典型商住楼模型的振动台试验结果为基础，分析了原型结构的受力及抗震性能，提出了一些设计建议，可供工程设计参考。     

关于结构耐久性终结标准设置方法的探索

本文论述了结构可靠性、耐久性、设计寿命以及使用寿命的关系，阐明了设置结构耐久性终结标准的必要性，提出了确定该标准的两条途径；结构可靠性分析和风险分析，为结构的耐久性设计及评估打下了基础。     

Untersuchungen zur Genauigkeit von magnetisch induktiven Betondeckungsmessungen

Assessment of the accuracy of concrete cover measurements using Eddy Current devices The use of non‐destructive testing in civil‐engineering (NDT‐CE) is well established to assess as‐built drawings for existing structures as well as for quality assurance of new buildings or in case of concrete repair. To gain reliable results the choice of the appropriate testing method in combination with the correct data assessment is essential. Hence this article starts with the basics of the two typical testing methods for concrete cover measurement with high precision. Methods based on Eddy Current and based on Radar are different. The strengths and limitations of both methods are presented. In the second part the achievable accuracy of concrete cover measurements using Eddy Current will be assessed for the most important parameters that have been varied in a wide range. It is shown how results are influenced by an improper input of the diameter or by the effect of neighbored rebars. At the end of the article it is shown how the deviation of the results can be minimized using the internal neighboring rebar correction of some of the devices. This article does not intend to be a product test rather the influence parameters of measurements close to reality will be identified and quantified how the accuracy of concrete cover measurements is affected.     

基坑开挖对邻近任意角度建筑物影响的有限元分析

实测结果表明,邻近基坑的建筑物与基坑边互不垂直时,基坑开挖将导致墙体同时发生挠曲变形与扭转变形。三维有限元分析表明,对与基坑边成一定角度的建筑物,当其跨越坑外沉降槽最低点或沉降曲线上凸区域时,建筑物所产生的扭转变形最为显著。随着建筑物与基坑距离的变化和建筑物纵墙与基坑边之间夹角的变化,当建筑物位于天然地面沉降挠曲程度较大的位置时,建筑物的挠曲变形对墙体拉应变起主要作用,墙体最大拉应变发生在建筑物纵墙垂直于基坑边,即纵墙与基坑边相互垂直时是建筑物的最不利位置;而当建筑物位于天然地面挠曲程度较小的位置时,墙体的拉应变源于挠曲变形与扭转变形的共同作用,纵墙墙体的最大拉应变将发生在与基坑边成一定角度的建筑物纵墙上,此时纵墙与基坑边垂直并不是建筑物的最不利位置。     

ÖBB Steyrtalbrücke – Belastungsprobe und Langzeitmessungen

ÖBB Steyrtalbridge – Load test and long term measurements At km 65,621 of the railroad track between Linz and Selzthal the Steyrtalbridge was rebuilt in the years 2013 and 2014. The essential design criterion from the client ÖBB Infrastruktur AG was the endeavor of an optimized bridge under consideration of life‐cylce‐cost, which among other things despite a bridge length of 182 m can be designed without high‐maintenance breather switches. Based on the current standards and certain design flexibilities, which are allowed in the codes special ways and techniques were used to calculate the rail tension. With this results of the rail‐structure‐interaction it was possible to design without breather switches. As consequence of the assumptions in the planning process it was necessary to make comprehensive measurements which shall give information of the real behavior of the bridge and compare them with the assumptions and results of the static calculation. Therefor static and dynamic load test were performed before opening to regular traffic. In addition long term measurements were carried out to evaluate the load‐bearing behavior over time and to confirm the calculation approaches for the verification of the rail‐structure‐interaction. In this article the planning of the monitoringsystem, the implementation and results of the load test and the following long term measurements are illustrated.     

Beurteilung der Tragfähigkeit von geschädigten Stahlbetonbrücken auf der Grundlage der Ergebnisse einer Bauwerksprüfung

Structural Reliability Assessment of Damaged Reinforced Concrete Bridges on the Basis of the Results from a Bridge Inspection The regular bridge inspection is of high importance for the reliable use of the infrastructure. This paper describes and explains a method with supports the engineers of a bridge inspection in the assessment of the damaged bridges during or directly after the inspection. Based on this initial estimate the urgent measures i.e. a lower permitted bridge class can still be carried out before more detailed inspections and calculations have been done. The reliability analyses for the damaged bridges are carried out using first order and second order reliability method (FORM and SORM). The probability of failure, p_f or the safety index, of the system respectively are the main results of the calculation procedure. This paper shows the approach and the application with an example. Particularly in the communal sector the method can be helpful, because it can not be assumed that in all cases the regular bridge inspections and the appropriate maintenance have been carried out.     

Bewertung einer alten genieteten Stahlbrücke – Die Bösebrücke in Berlin

Evaluation of an old riveted steel bridge – The Böse‐Bridge in Berlin, Germany. This report is about the recalculation of the Böse‐Bridge in Berlin which was built between 1912 and 1916. A special feature of this three‐bayed truss arch bridge is the nickel steel used in the main bay. Different models have been used to recalculate the main structure, the truss nodes and the carriageway slab. The static analysis is based on the semi‐probabilistic concept. As a result of this recalculation the construction was classified to have the bridge capacity 30‐30 according to DIN 1072. Finally, this report concludes by determining the remaining lifetime depending on the concept of the Wöhler curves.     

Feldversuche mit dem Brückenklappverfahren

Field Tests with the Balanced Lift Method As a counterpart to the lowering arch construction method the “balanced lift method” for bridge girders is suggested. The bridge girders can be built in combination with the pier using climbing forms in a vertical position. Therefore, during the production no bending stresses are generated in the girders. Thus, the balanced lift method allows lower costs and a shorter construction time than the traditional balanced cantilever method. The span of the bridge girders is reduced by the compression struts or tension ties which results in substantial savings in construction materials compared to the balanced cantilever method for bridge construction. The proposed method will be especially advantageous for bridges with high piers. The range of the span length for the application of the balanced lift method ranges between 50 m and 250 m.     

捕捉“光线”——解读葡萄牙“梅莉德斯周末住宅”

本文以阿雷斯·马特乌斯兄弟设计的梅莉德斯周末住宅的院子为线索,通过其与冈卡罗·伯内设计的“阿维罗大学的校长楼”进行比较,揭示了“光线”是其设计的核心。这为我们研究葡萄牙建筑提供了更为全面的视野。但更为重要的是,文章表明了类型学的方法论在中国大规模快速建造的今天更具现实意义。     

Entwicklung eines baupraktischen Näherungsverfahrens zur Beurteilung der Zuverlässigkeit von Massivbrücken auf der Grundlage der Ergebnisse von Bauwerksüberprüfungen

Im vorliegenden Teil 2 des Beitrags wird die Entwicklung des baupraktischen Näherungsverfahrens für die Beurteilung der Zuverlässigkeit von Massivbrücken im Rahmen der RI‐EBW‐PRÜF vorgestellt. Wesentlicher Inhalt ist dabei die Modellierung der Modellunsicherheit Bauwerksprüfer, da die Bewertung der Mängel und Schäden an einem Brückenbauwerk durch den jeweiligen Bauwerksprüfer einen entscheidenden Einfluss auf die Zustandsbewertung hat. Zudem wird auf die Dimensionsanalyse von Grenzzustandsfunktionen näher eingegangen, da damit bei geschickter Normierung eine allgemein gültige Anwendung des Verfahrens erreicht werden kann. Die Anwendung des Verfahrens erfolgt mit einem Software‐Tool, das abschließend vorgestellt wird. In Teil 1 des Beitrags wurden die Grundlagen des Verfahrens sowie die Entwicklung der veränderten stochastischen Material‐ und Geometrieparameter infolge Schädigung behandelt. Development of an Approximation Procedure for a Structural Reliability Assessment of Reinforced Concrete Bridges on the Basis of the Results from Bridge Inspection Part 2 of the paper shows the development of the approximation procedure for the reliability assessment of reinforced concrete bridges according to RI‐EBW‐PRÜF. An essential part of this is the development carried out by the model uncertainty bridge inspector, as the respective bridge inspector's individual assessment of the damage of a bridge has a decisive influence on the condition evaluation. Furthermore, the dimensional analyses of ultimate limit states are shown, as the general use of the developed methodology can be achieved with an ingenious standardization. The application of the procedure with the developed software tool is presented in conclusion. Part 1 of the two papers describes the basics of the methodology and shows the development of the stochastic models for the material and geometry parameters which have changed as a result of damage.     

Museumsinsel Berlin – Geotechnische Untersuchungen für die Grundinstandsetzung und Ergänzung des Pergamonmuseums

Museum Island in Berlin – Geotechnical investigations for the overhauling and completion of the Pergamon Museum. Overhauling the Pergamon Museum on the Museum Island in Berlin is a particularly complex task concerning geotechnics. On the one hand the substratum and ground water conditions in the area concerned are very inhomogeneous and on the other hand the Pergamon Museum and its neighbouring museums are especially valuable buildings worthy of protection. The initial target of the geotechnical investigation programme was to further safeguard the substratum and ground water conditions. Here systematic investigation of the substratum was carried out based on old historical drillings in order to enable the use of innovative special civil and underground engineering procedures. Furthermore it was necessary to investigate the foundation situation of the existing buildings. The planning objective is the technical and cost‐effectively optimized choice of the required geotechnical measures for the intended overhaul and refurbishment of the Pergamon Museum.     

Rheinbrücke Breisach – Umbau und Instandsetzung einer 45 Jahre alten Stahlkonstruktion

The Rhine Bridge at Breisach – Alteration and maintenance work at a 45‐years‐old steel structure across the river Rhine. The Breisach Rhine Bridge between Breisach in Baden‐Württemberg, Germany, and Neuf‐Brisach in Alsace, France, is next to the Europe Bridge Kehl–Strasbourg the most important road connection between the two countries. The three‐pillar road bridge was built in 1962 using the foundation of an old railway bridge. The box girder of the bridge is welded as well as riveted and bolted. Both the design of the curb with its underseepage – a feature that was often used at that time but is now out of favour – and damages at the drain pipes in the girder box led to significant corrosion damage. In the future a bicycle lane will run over the bridge. For this an enlargement of the southern footpath is required. Bridge repair and maintenance work began in the spring of 2008. In this paper not only the details of the projects will be considered, but also the solutions to the problems discovered during repair work. An additional special feature of the bridge is the fact that two road construction agencies, one French, one German, are in charge of maintenance.